Events: Snow trip - gear summary

I was lucky enough to be taken up to the snow for my 40th birthday not long ago, by my mum, who kindly took my whole family up for a long weekend at the Falls Creek snow resort in the Victorian Alps. Snow, in Australia? Yes, it snows here. Sometimes, in a few places. When we went there was a base-cover of around 80cm and it was forecast to be between -3oC and -6oC, with 24cm sow expected each night, or thereabouts.

It was a 5 hour drive, including an hour on the shuttle-bus, as we didn't want to go through the hassle of snow-chains and on-mountain parking, as well as windy, icy mountain roads. Leave it to the professionals, I say, and have a nap on the way.

That said, when we arrive mountain-side, it was sleeting pretty heavily, and continued to do so for the majority of the day. We lost a bunch of snow cover and everybody got damp. Some more than others. That's kind of what I wanted to cover in this post. What I wore to stay warm and dry. What gear  I took.
 Now, I cheated to some extent in that I hired ski-boots, and the outer-layer jacket and ski-pants for when we actually went skiing, (my first time in 20 years, since I lived in Calgary, Canada).

However, I also packed accordingly, for the times I wasn't skiing, and I'm glad I did.

I've had quite some experience in cold climates, both Canada, the UK, Danmark, as well as holidaying and I know they key elements to not having a bad time are to stay dry and warm. Not always both, but if you are one, or the other, you can usually get by. Cold AND wet? You're going to have a bad time.

Here's my layered approach to a trip to the snow:
I wore as my base-layer, the Platatac fleece leggings, and DriFire long sleeve shirt. I don't have any fancy socks, but tend to get hefty heavy-duty socks from the supermarket and wear them to death These ones are Kirkland's,, from Costco. nothing special, but long lasting and don't get stinky.
I wore my Danner Striker ii GTX combat boots, which could do with a thorough polishing, but I hit them with a liberal coating of Kiwi boot waterproofing spray and they worked a treat, even when I stepped through slush up past the ankle. Be sure to open the laces right up if you're waterproofing boots, and get in around the tongue to ensure you don't miss any leakage points.

I looped the leggings foot-hole stirrups over my socks, so they didn't ride up, and I had full coverage from toe to belly-button. Tucking my shirt into the elastic waist of the leggings then carried that all the way up to my neck. No cold draughts.

For my outer layer, I took my snow-proven Propper Adventure Tech shell outer pants, which offer a wind and water proofing layer that I really appreciate. They don't have a lot of pocket real-estate, but I made do, and didn't either loose anything, or lack anything on my adventures.

Over the DriFire shirts, I wore the lightweight Propper windcheater which provided me a really good lightweight dry-layer, as well as having a good neck-seal. My one was a bit too shirt, so my super-long arms tended to poke out, but I had a plan for that anyway.

As my outermost top layer, I chose my Baubax multi-function jacket, which is a semi-hard shell with a hood and thumb-hole fitted wrist extensions. I'll be covering this in detail some time soon. It held the sleet off really well, although the cuffs and the wrist extensions got pretty sodden. They could do with a dose of waterproofing spray as well, I think.

As far as outer layers went, it was a spot on combination for what I was expecting, although had I wanted to stay even dryer, I should have packed my Hazard4 Poncho Villa but I erred on the side of less gear. I should have left out my spare 90's era snow-pants I got when we moved to Calgary, but I'll pack it next time.

For head and hands, I wore my Peruvian fleece caps, along with one or two Headsox to keep my neck, mouth and ears warm. I wore my dual layer, long wristed Condor Nomex gloves which I also gave a liberal waterproofing. That can of spray was an excellent addition and I can't recommend them enough. I think I shall trial a few different ones soon.

I wore a skiing helmet, to which I mounted my Contour Cam in its waterproof case. I gave the misty fogging Arena Flakjack goggles, with a smoky lens fitted, which remained mostly useable when I was skiing, but I needed to keep taking them off and wiping them off. The goggles really helped me have a clear and wind-free view of where I was going at upwards of 40kph downhill, who knew? I didn't hit ANYTHING this time. (I killed two aspen saplings at least, when living in Calgary).

I wore my Platatac Bravo hydration pack, with a 3L Source WXP bladder in it. I have a Blackhawk Side Plate carrier mounted to the bottom of my Bravo, as its hook-and-loop top makes it an excellent flat-pack pocket.

All in all, I was really pleased with my loadout, but most of all, I can't go without saying that my favourite bit of cold-weather kit was the SORD StormTrooper belt-fitted muff. Not only did it's pockets keep my needfuls (like my Manta emergency strobe, CLIF bars, and the like), they also were a place for me to stuff my gloves, and also just plain keep my hands warm. Warms hands mean good-times.

Review: Platatac prototype hydration carrier

Here is the hydration pack that I have been using for the last few Tough Mudder events I've done. This is an old prototype from Platatac that I picked up on eBay, and combines elements of both their Bravo hydration carrier that I have, and the MEOP Medic Pack both of which I've covered in the past, and are great pieces.

I found that wearing an extra set of straps was redundant when I was wearing a vest anyway on my Tough Mudder and similar adventures, which is why I looked for an alternative to the Bravo, which has served me well in other situations, and on my first Tough Mudder. When I saw this piece come up on eBay, I was thrilled to give it a go. It follows the same kind of design philosophy I've come to expect from Platatac pieces, with a tough 1000d Cordura exterior, and ITW Nexus hardware. It if "faced" with 6 rows of 4 channel PALLS/MOLLE loops, and features a hook-and-loop secured drag handle. Running down the flanks are nylon D-rings, three to a side, allowing shock or paracord to be run through these, to provide attachment points, or compression.

The wide-mouth of the pouch perfectly fits the Source Storm 3L hydration bladders main cap.

The baffled sides of the carrier allow for quite significant volumes to be carrier, without restriction, or perhaps even storage for other items besides a hydration pack. However, this particular piece lack the zipper-access of the Bravo, which means that the only access into or out of the inside is through the main cap.

This actually posed a problem when trying to run my hydration hose through it, and I bit the bullet and melted a channel in the backside to feed it through.

I also had to melt a drainage hole in the bottom, following the previous Tough Mudder, last September.
I found that the carrier filled up with nasty pond water when I took my tumbles, which really added to the weight I was hauling. No such trouble with a small drain hole melted in this time around.

The back of the carrier offers a variety of attachment options; Zippers paired with the MEOP carrier (which allows me to sandwich these two pouches nicely). It also features female Fastex clip ends top and bottom, tri-glide loops for all your clipping and looping needs. Best yet, the back features two sets of three three channel PALS/MOLLE PLMRS (Platypus Light Modular Recovery System) strips. These gave both a rock solid attachment and also load spreading capacity. I barely felt the 3kg that the full bladder weighed,and certainly not the sloshing side-to-side I might have with a pack-type carrier.

This was just a prototype, bridging the gap between the Bravo and the MEOP, but if you want to see the new production version, check out the Platatac Utility Hydration Cover. Looks like the logical next step.

Review: Source - Storm WXP 3L hydration bladder

Here's a much loved but oft forgotten item in my survival, training and adventuring kit. This is the
Source Storm WXP 3L hydration bladder which has seen some pretty heavy use in the past, and I thought it was fully worth showing the light of day.

Ive covered some hydration systems in the past, such as the the Platypus PIB hydration pack and several hydration bladder carriers, such as the lustful Geigrrig Tactical Guardian (I'd love to get my paws on one of these) the 0.75L version that come in the Tactical Tailor Joey hydration pouch and the backpack style Platatac Bravo pack. This isn't my first Source 3L bladder, as I failed to follow the care-and-cleaning guideline of DO NO USE BOILING WATER ... they melt. Hot enough for your hands is hot enough. More on this later.

The bladder itself is constructed from a very special three layer, coextruded polyethylene construction with a very special low maintenance liner layer. Integrated Grunge-Guard™ antimicrobial surface. This  435 micron thick surface prevents bio-film build up, my being almost glass-smooth, (Source quotes it as being  2000% smoother than standard TPU films, with virtually no difference from glass itself. This reportedly improves the systems self-cleaning function.

The wide opening access at the top opens with a slide closure for easy filling, draining and cleaning. The fold and slide lock gives a strong, airtight seal. A retaining cord ensures clumsy finders don't drop it in the muck, or let it wash downstream. It also means that you can add ice, or powdered drink supplements.

I found all the seams, including those at the tube attachment point to be very strong and well placed to take any tension that the bladder is challenged with, so far.

The drinking tube attaches to be bladder with their propriety QMT™ Quick Mate Technology hose fitting, which offers push button convenience, no leakage, and click-in compatibility with USMC Miox filter system. Sometimes the clip can be a little stiff, but hardly much of an issue for me, as I rarely took these off, except to rinse. However, even at the tube tip the QMT is completely self sealing.

This means that even with a full reservoir you can change tubes, add valves or whatever, without worrying about drips or leaks. Great for fitting a full bladder into a pack that already has a hose run through it. Sometimes hydration tube ports can be a snug fit.

The drinking tube is 94cm (37") long, and contains its own valve built in. Again, no drips or leaks when changing the tip or feeding it through bags and gear. The tube cover both insulates and blocks UV-light.

This helps your water cool and bacteria free from first to last sip. I really noticed this when doing long stretches in the sun with this. the temperature gradient from tube-to reservoir was always delightfully small.

The very cool push/pull Storm Valve isn't a bite-valve, being a pull-open plug like on a sport bottle. It apparently delivers 25% higher flow than bite designs. The integrated valve has a twist-lock which will lock the valve in the "off" position, so you don't have to worry about inadvertent leakage. It is also set at 90 degrees from the tube, which apparently reduces the required tube length (for twisting it around to have kink-free drinking) by 25cm! It also rotates 360 degrees, allowing you to place the valve end on any side of your gear, and have access to it.

It comes with a dirt-shield cover, which is also dummy-corded on, and can be cinched with a dedicated slit, to stop it from dangling and rattling about when not used.



In addition to the Widepac wide opening access at the top, with its hanging slot,  the bladder also has a screw-top opening, which incorporates a carry-yoke. The yoke can be rotated to best suit your carry style, but allows even gloved hands to hold the bladder open for refilling without contaminating the reservoir.

The gasket screws down over the yoke to hold it in place, and is also dummy-corded to the wide-mouthed cap. I have had some troubles with the gasket winding loose, and this impacting on the seal the cap gets, but if its screwed down tight, all should work out well. 

Evacuating all the air from the bladder keeps it very quiet, no canteen-sloshing noise-disipline worries there, and the placement of the tube to the bladder means you pretty much get every drop emptying out, you can even set it to run continuously, using siphoning, to get regular irrigation, or when running detergent through it to clean it. The guys at Platatac recommended throwing it, washed but not dried into the freezer as a decontamination step, which is a far better idea than melting it with overly hot water, I have to say.

This particular bladder has seen me through camping, long haul drives, and three Tough Mudders, and it's going strong! I even inflated it and used it as a flotation aid when diving off one of the "Walk the Plank" high dives on Tough Mudder.

I'd love to try one of the Universal Tube Adapter  attachments, which lets you fill the pack from the drinking valve, from taps or bottles, without having to take it off your pack or out of a pack.

Review: Tactical Tailor - Hydration Joey Pouch

I was very fortunate to have one of my articles snapped up by David Reeder of KitUp! and he then put me in touch with Casey Ingels of Tactical Tailor to do some reviews for them. I of course was overjoyed to be part of the team, so here we go. 

First up, in quite the pique of humor, the guys thought it would be funny to have me look over the Joey Hydration Pouch. For those of you who don't know, a joey is a baby kangaroo  so, it's a perfect name for this little pouch. Here is what I can tell you.
Made from 1000D Cordura, and in coyote brown here, this pouch fits the Source 0.75L bladder that comes as optional extra through Tactical Tailor.

The double zipper closure gives not only very secure storage, but also gives considerable protection to the contents as well as giving easy access. Paracord zipper pulls eliminate metal-on-metal tells and drain holes at the bottom of the pouch ensure you don't scoop up too much of the wilderness as you are adventuring, without exposing the bladder to significant risk.

 The back of the pouch is a close stitched 5 row, two column PALS/MOLLE region, which arrived with two 5" MALICE clips giving you a variety of attachment options.

I fed mine through the 3" loops, to give it a belt-wearable test, but it would do just as well lashed to the side of a daypack, or chest-rig.
The entire body of the pouch is wrapped in three rows of PALS/MOLLE to make the pouch even more useful, as a platform

 
The lid of the pouch has a panel from under which the hydration tube can escape, left or right, but the brilliant thing about this pouch is that it not only fits the 0.75L Source pouch, but also a 1L (32oz) Nalgene bottle.


Here is me out testing the pouch. As I said, I wore it on my belt, here lashed to the d-ring of my Triple Aught Design Amphibious shorts via the hook-and-loop retention strap on the source drinking tube.

This setup has allowed me to go for my run, drink as needed and drop the tube, without it slipping and slapping all over the place, or letting Tactical Baby get too good a grip on it as she slipped through before taking me down in classic hapkido fashion (I presume).

For times when lugging a whole 3L bladder is just too much effort, when considering the need for a bag to carry one, like the Platatac Bravo and only a small volume is required (or for those weight conscious expeditions) this is a dream come true.

Between this and my ITS Skeletonized Bottle Holder I don't intend to go thirsty any time in the city, ever again. This is an extremely well put together pouch and certainly lives up to the expectations of something named after Australian wildlife.  Stay tuned for more from Tactical Tailor ....

Events: Tough Mudder #2 Melbourne 2013

 I ran the Tough Mudder again this year, January 19th, which was a lovely sunny, breezy day here in Melbourne.

The event was held at the Phillip Island Raceway again, which lays an hour and a three quarters drive from Melbourne, and backs onto the Bass Strait. I had only recently been given the all clear from the ankle troubles of late last year, and had not had a lot of preparation, baring three or four runs, of 2 - 5km, so I wasn't sure about how I would cope, not only with my ankles, or my general lack of CV fitness as a result of my injury, the prednisone treatment (25mg daily, dropping 5mg each week to wean away).

Regardless, I had booked in, and was raring to go. I had tried to drum up interest from the folks I ran with the previous year, but no takers (although it turns out, a couple did the event as it happens).

For those who don't know what the Tough Mudder is, it is a 20+km endurance challenge, with 25+ military inspired obstacles. The events run world-wide, in all conditions, and feature some signature obstacles, namely, lots, and lots of mud, electrical wire filled corridors, and pools swimming under barriers, ice filled pools and all manner of climbing, crawling, and of course, running. I hate running.

The above pics are me before the race, in my running kit, pretty much the same outfit that I wore for the previous endurance event I did, the Stampede with the First Spear OAGRE vest, with my Source 3L bladder in the back, and snap-fixed to the 5.11 Tactical TDU belt, keeping the vest snug to me and my TAD Amphibious Shorts with my trusty Blackhawk! kneepads, which were again, a real bonus, so, "i told you so" to all the scoffing runners out there. You can see me, fresh from the Arctic Enema/Chernobyl Jacuzzi ice bath and dunk, fishing a couple of ice-cubes out from my kneepads. I also wore my iPhone, in its SLXtreme case mounted in the Platatac PRR pouch I got specifically for the event. On my head I wore one of my caps, which I had modified to carry a picatinny rail, in order for me to mount my Contour GPS helmet-cam to, via the Strikemark adapter I have. I also added a chin-strap to the cap, to help deal with the added weight of the camera, which seemed to work pretty well. I wore one of the Under Armour t-shirts from the previous Tough Mudder and my Ironclad gloves.

I also swapped out boots, having put my Altama's into retirement and for this event, I wore my Bates Delta-8's which really held up well, and cleaned up tremendously.

Here's one of me having scaled a 2m "Berlin Wall" and torn my number off in the process. Lesson learned, bring my own safety pins or lashing system. Their little pins were ineffective!

This is me and my running-mate, #7819 :) doing the SHINBASHI salute after coming over the Bale Bonds.

She and I knew each other socially, and upon hearing my interest in a running-mate, signed up, regardless of trepidation and obstacle-shyness. Far better a runner than I, we kept a good pace, she kept me going on the straights, and I helped her along on the climbing, jumping and swimming, crawling and squelching.

She started the race with a black headscarf to match her all-black running slicks. I was referring to us as "day-ops" and "night-ops". My gear was already mud-coloured, and my head higher up, so don't think that I was getting away unscathed ...

We did the course in just under 4 hours, I felt that it was actually a lot easier this year, even without all the extensive running I did prior to the previous events. This may be in no small part to mental preparation, and experience. There were no "I haven't done it before" nerves. I made it over every obstacle on my own steam, climbed every wall, made it across the slippery monkey-bars, made it up the Everest half-pipe on my first run. I was rally pleased with not only my pace, but the speed I overcame the obstacles in my path, but also how I was able to help me fellow Mudders.

Here I am, following the event, having stripped off the OAGRE, sporting my celebratory headband, and working up the guts to pull my boots off. Not a blister, or scratch, but a lot of grit and muddy water. It turned out that the time-lapse application I had hoped to run on my iPhone hadn't begun, but the SLXtreme and PRR combination had worked like a dream. The Picatinny rail I had mounted the Contour cam on needed to be at more of a down-angle, I took a lot of 3/4 sky footage, but see below for my links.

I dinged my shin whilst hurdling a log, and gave myself this exciting bruise on the back of my left thigh. Last year I had two of these, one on the back of each thigh. This year I pegged the moment when I got it ... scaling one of the 4m Berlin Walls, lesson learned? major muscle groups do not make good leavers!

A great event, a good challenge, and certainly a good conditioning and preparation experience.

Will I do it again? hells yes. As many, and as often as I can manage.

http://contour.com/videos/watch/tough-mudder-jan-2013-1-1
http://contour.com/videos/watch/tough-mudder-jan-2013-1-2--6
http://contour.com/videos/watch/tough-mudder-jan-2013-1-4--3
http://contour.com/videos/watch/tough-mudder-jan-2013-1-5
http://contour.com/videos/watch/tough-mudder-jan-2013-1-6
http://contour.com/videos/watch/tough-mudder-jan-2013-2-1--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-2--2
http://contour.com/videos/watch/tough-mudder-jan-2013-2-3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-4--4
http://contour.com/videos/watch/tough-mudder-jan-2013-2-5--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-6
http://contour.com/videos/watch/tough-mudder-jan-2013-3-1
http://contour.com/videos/watch/tough-mudder-jan-2013-3-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-1
http://contour.com/videos/watch/tough-mudder-jan-2013-4-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-3
http://contour.com/videos/watch/tough-mudder-jan-2013-4-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-1
http://contour.com/videos/watch/tough-mudder-jan-2013-5-2
http://contour.com/videos/watch/tough-mudder-jan-2013-5-3
http://contour.com/videos/watch/tough-mudder-jan-2013-5-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-5
http://contour.com/videos/watch/tough-mudder-jan-2013-6-2

Apocalypse Equipped, no, really.

So, the Mayan Long Count Calendar is widely believed to clock-over today.

It's also the Solstice...

AND the last workday before my FAMILY XMAS (Que dramatic spooky music)...

Apart from having to be at work, I wanted to give you all a quick insight into my "it's all hit the fan" load-out.

When the sirens and screams start, this is the kit that I would be strapping on, and similar to what I'd be dishing out to my family to load up and be ready. Fortunately I have quite the collection at the ready.

To be fair, this is my full "there is no help or law coming" gear, not just a "house-on fire, leave for mum's" and I would strive to abide by the laws on my land wherever needed. Wearing swords and the like "without reasonable cause" is frowned on here. In fact, the whole get-up would arouse considerable consternation for LEO's.


That said .... here is a break down of my "end of the world",  kit, because I want to be Apocalypse Equipped.....

1.  http://apocalypseequipped.blogspot.com/2012/01/review-platatac-mac-plate-carrier.html
2.  http://apocalypseequipped.blogspot.com/2012/08/review-strike-industries-tactical-sling.html
3.  http://apocalypseequipped.blogspot.com/2012/01/review-platatac-meop-medic-pouch.html
4.  http://apocalypseequipped.blogspot.com/2012/08/review-countycomm-dropline-carabiner.html
5.  http://apocalypseequipped.blogspot.com/2012/01/review-platatac-sr25-utility-double-mag.html
6.  http://apocalypseequipped.blogspot.com/2011/12/platatac-fup-pouch.html /
   http://apocalypseequipped.blogspot.com/2012/02/review-platatac-60-round-mk1-pouch.html
7.  http://apocalypseequipped.blogspot.com/2011/12/review-countycomm-breacher-bar.html /
   http://apocalypseequipped.blogspot.com/2012/09/review-countycomm-breacher-bar-sheath.html
8.  http://apocalypseequipped.blogspot.com/2012/11/review-zulu-nylon-gear-caos-admin-pouch.html
9.  http://apocalypseequipped.blogspot.com/2012/05/review-gerber-strap-cutter.html on a single-shingle I use for my 2-way radio
10.  http://apocalypseequipped.blogspot.com/2012/09/review-countycomm-premium-emt-combat.html
11.  http://apocalypseequipped.blogspot.com/2012/12/review-platatac-headstock.html
12.  http://apocalypseequipped.blogspot.com/2012/04/review-under-armor-shirts.html this one from Tough Mudder
13.  http://www.pro-tec.net/classic-skate-helmet.php
14.  http://apocalypseequipped.blogspot.com/2012/07/review-platatacgerber-branded-cap.html
15.  http://apocalypseequipped.blogspot.com/2012/06/review-platatac-bullock-echo-daypack.html with http://apocalypseequipped.blogspot.com/2012/06/review-dead-on-annihilator-superhammer.html  3L Source bladder and MOLLE zipper strips to mount it to the MAC
16.  http://apocalypseequipped.blogspot.com/2011/12/review-platatac-csi-folder.html
17.  http://apocalypseequipped.blogspot.com/2012/02/review-sigg-1l-bottle.html
18.  http://apocalypseequipped.blogspot.com/2012/12/review-snow-lizard-slxtreme-iphone-case.html
19.  http://apocalypseequipped.blogspot.com/2012/05/review-platatac-half-med-pack.html
20.  http://apocalypseequipped.blogspot.com/2012/12/review-zombie-tools-deuce.html
21.   not yet reviewed PRR Pouch
22.  http://apocalypseequipped.blogspot.com/2012/02/review-215-gear-sling.html
23.  http://apocalypseequipped.blogspot.com/2011/12/review-ironclad-landscaper.html

and that's on my top half, and not even what IN those pouches and bags....

now on to my lower half ....

24. Danner Striker II boots, replacing my http://apocalypseequipped.blogspot.com/2012/01/review-bates-delta-8-boots.html
25. http://apocalypseequipped.blogspot.com/2011/12/review-platatac-young-guns-belt-braces.html
26. http://apocalypseequipped.blogspot.com/2012/05/review-lazerbrite-tactical-pouch.html
27. http://apocalypseequipped.blogspot.com/2012/11/review-platatac-3x-40mm-pouch.html on 90 degree mounts
28. http://apocalypseequipped.blogspot.com/2012/02/review-platatac-modular-radio-pouch.html
29. http://apocalypseequipped.blogspot.com/2012/02/review-platatac-drop-gas-mask-bag.html on a platatac-half-leg-rig
30.  http://apocalypseequipped.blogspot.com/2012/08/review-schrade-army-10-knife.html
31. http://apocalypseequipped.blogspot.com/2011/12/review-countycomm-micro-grappling-hook.html
32. http://apocalypseequipped.blogspot.com/2012/03/review-black-hawk-kneepads.html
33. as yet un-reviewed prototype Platatac EDC trousers: WATCH THIS SPACE, these are ace!
34. http://apocalypseequipped.blogspot.com/2012/09/review-511-tactical-tdu-belt-175.html
35. http://apocalypseequipped.blogspot.com/2012/07/review-ka-bar-zombie-sword.html
36. multitool ..... because MacGuyver demands it!

So there you have it....

There are a few more things that may or may not make it into my kit, and of course, the contents of those pouches and packs, but that's my expected load-out.

EDIT: Stupid predictions ... it's1130am 21/12/12 and STILL no flaming jade jaguars ....

Review: Platatac Bravo Hydration

With the upcoming Tough Mudder Australia event this weekend, I wanted to show you one piece of kit that I've been using, both for preparation for this, but also on my Stargate Lasertag LRP events, as well as a good solid piece of outdoor and adventure kit. This is the Platatac Bravo Hydration System, which is coupled with a Source WXP 3L Bladder. This was an item that I managed to put on my wish-list, and was lucky enough to receive. I've always been fond of keeping fluids on me, mostly with my combination of my SIGG bottle, which I've reported on, and carry in a FUP pouch everywhere I go. However, sometimes it's more practical to sling all of that onto a backpack, rather than hanging off a belt, especially if you're going to be away from reliable water for a while, or know you'll be doing some hot hard work. That's where a bladder reservoir comes in so handy, especially if they are well made, and carried. That's where the Bravo comes in.


As with all the Platatac range, it's made from the 1000d Cordura, and features a 4 channel, 6 row battery of PALS/MOLLE attachment points on the back, as well as 3 nylon D-clips on the sides of each ventral edge. These are great for either attaching the pack to another piece of gear, like a pack or plate-carrier, or to sling shock-cord through to attach items to the Bravo itself, like a poncho, or the like. The Bravo also comes equipped with a reinforced drag-handle, with hook-and-loop for nameplates or the like and also a hanging loop, which I've found very useful. As you can see from the side-profile, the pack itself expands quite a lot, and there is in fact room for an entire second hydration bladder, should you so desire, (remembering that 1L water = 1kg!) but it also means that there is room within the pack for other things (be sure not to pack anything pokey though!). You could also use the D-clips to use shock cord to compress the pack, keeping the load snug and secure, and adding some water-pressure, but I haven't had any concerns with this.


 The "front" of the pack looks like front side of most backpacks, with a couple of exceptions. As well as the usual Fastex clips and webbing loops, a couple of D-Clips and a sternum-strap for stability (which also includes a signalling whistle in the clip, nice one Platatac!). The backing of the Bravo is a moisture wicking-mesh, and features a drainage grommet. The zipper for access to the insides of the pack is on the "inside" and can be seen as the big curved arc at the top of the pack here. There are ports for the hydration tube at either shoulder, and large squares of hook-and-loop towards the top the shoulder-strap gives you more control over the placement and movement of the tube. The wide mouthed screw opening of the bladder fits snugly into the dorsal side of the pack, and is totally removable.

The Source bladder that came with the Bravo is all kinds of awesome as well, featuring their TASTE-FREE™/BACTERIA-FREE™/CARE-FREE™ Grunge-Guard™ System which basically equates to a easy to clean, easy to maintain, and nice to use bladder and drinking tube (which is in itself covered in a woven tube, for protection, UV resistance and insulation). The mouthpiece is angled 90o which means it is easier to use, with less cod needed to get it into your mouth, and features a really good drinking valve. Both the mouthpiece and tube detach from the bladder for ease of cleaning, with spill-free valves built in, and the bladder itself has both a wide mouthed screw opening and a fold-and-slide closure too. I had some misfortune with my first bladder, after not reading the care-manual, I rinsed it out with hot-hot water, which somewhat melted and warped the bag. DON'T DO THIS!

I'm really pleased with the Bravo, and the Source bladder Platatac paired it with. Its been out adventuring with me a couple of times, and will be getting a serious workout this Saturday at Tough Mudder. Wish me, and my gear, good luck!


[EDIT]

I survived the Tough Mudder, as did my Bravo! I really appreciated having a source (har har) of hydration along the way, and it also gave me a good platform to run my Contour GPS off (although running makes the footage a bit jiggy).

The pack stayed snug to me as I ran, crawled, slid, swam, climbed and trudged my way through the course, was barely noticeable as far as wear and rubbing is concerned and the tube system was really convenient. The mud-cap worked really well, and hardly any muck got on the mouthpiece, even when I was caked with almost an inch of it to my whole front. I saw a lot of discarded hydration systems, mostly cheep looking ones, Camelback being the only name I recognized, but there was no way I was going to discard mine! One thing I noticed, the wide-mouth screw-cap leaked a bit. Should it have an o-ring in it? Maybe Platatac can let me know if I've lost mine, or just didn't screw iit down tight enough.