hat-tricks!

Just the Tip: Hat Tricks

Hats. Pretty ubiquitous. Be it the classic Stetson of the cowboy, the sand, maroon or green beret of the bad-ass snake-eaters (colours depending on your nationality), the Akubra with corks and/or crocodile teeth of the Aussie bushman, or the perfectly curved and patch bedecked ball cap (or patrol cap) of the seasoned operator. These are often underutilized pieces of kit.








So, hats! They're not just head coverings and eye shields. Read all about it here on Breach Bang Clear

Review: Lumintop Tool AAA flashlight

I've been very remiss about this one, this little light has alternated between sitting in the bottom of a couple of bags, and then pockets of both pants and jackets. This is both to its credit and a flaw, but I'll get to that.

The Lumintop Tool AAA is a very diminutive light, at just over 8cm (3.2") long, and around 30g (1oz) it really is pocket sized. Taking a single AAA battery, the machined aluminium body is less wide than a single AA battery.

A single tail cap button at the rear enables the user to cycle between the three light modes with momentary toggling, which starts at a Medium of 32 lumens, then to a 5 lumen Low setting and ramping up to a 110 lumen High setting. I really like this pattern, with a medium setting to get you out of the dark, a low setting next to enable you to do your dark-work without disrupting your night vision or drawing unwanted attention at the Watergate Hotel.

Having the High setting last means that you have to call it up and not only reserve battery power, but also maintain control over the amount of light you throw, till you need it.

Another excellent feature is that once the tail cap switch is "on", the head is on swivel, allowing twist-driven switching between the three modes and "off". There are o-rings sealing the unit at both the head end and tail-cap end, either of which can be used to replace the battery.

My favourite aspect though is that the detachable two-way clip, which enables you to fix the light directly to a cap-brim, giving you a keychain sized head-lamp at a moments notice. You won't be using it to chase alligators in the sewers, but find yourself with full hands in the rain and having dropped that screw from your widget, and you have yourself a good-to-go tool for the job. It's low weight makes it ideal for this use.

It's tiny size means it gets lost easily, especially if you have a lot of loose gear rattling about. AAA's are not high-power, or long lasting, but for occasional utility use, they'll do. Threading a lanyard through either of the lanyard loops in the tail-cap, or clipping it to a keyring would probably go a long way to retaining it.

It's not a searchlight, it's not a weapon-light, its a pocket sized keychain light with a very light profile

Here's some links from the vendor:

Their website: http://www.lumintop.com/

US Amazon store: http://amzn.to/2421r4t 

CA Amazon store http://amzn.to/29LZfWx

DE Amazon store: http://amzn.to/290zJjK

UK Amazon store:http://amzn.to/293oBQQ

IT Amazon store: http://amzn.to/29cRxlC

Review: Arena FlackJak goggles

I picked up a set of goggles a while back which I have added to my gardening, crafting and disaster preparedness kit. It's been a whiles since I have had a big set of goggles, my last set being a paintball mask, as I've made do with safety glasses or my much loved (and currently broken) Barz Optics goggles glasses to protect my eyeballs, in a way that my slim glasses just don't.

High speed fragments, harsh chemicals, dust and smoke in the eyeballs are just no fun and will ruin both your day and survival odds, which is why I look for ways to protect mine.



These are the Arena Flakjak goggles as seen under my Ops-Core style bump helmet This is the kind of setting they are specifically designed for, and you can see by the sleek fit, they really marry nicely with the brim of the helmet. They even fit my glasses reasonably well, although there is always a little skew one way or another when nose piece shares space with nose frame.

Arena state that their goggles feature what they call Razorback technology, which deals with fogging, particulate and moisture, by providing the a good airflow rate with a really interesting ridged vented filtration to create non-fogging conditions behind the lens while preventing debris like sand, moisture, and flying debris to enter the goggles.


The lens itself as well as the anti-fogging coatings, features OptiWide geometry which really makes for some really good optical clarity and distortion free peripheral vision to at least as far as I can see clearly with my glasses on, and only reduces my overall angle of vision by about 2cm or so at each side.

The lens material is ballistically designed for maximal eye safety exceeds Z87.1 - 2003 Plus standard and meets MIL-STD-662F (as related to .22 caliber, 17 grain, Type 2 fragment simulating projectile) standards. Which means my assertion for using it for for yard and craft work is probably spot on. Power tool fragments are not your friend.

One really nice feature of the goggles are the Buckle Management Retention Fastener (BMRF). This system allows for both quick and easy strap replacement, but also sturdy fitting both over a helmet, and against your bare head. The fits are quite different, and the rotating fastener really allows for this.

The modular buckle system also provides the goggles to integrate with a variety of helmet platforms, I tried it with my bump helmet, but also my Pro-tec Classic helmet and a couple of the hard-hats I have laying around.


One really important feature of any goggle is the lining and seal. The lining of these are made of the VS Foam, which is a proprietary goggle foam designed to wick moisture away from your face. The surface is comfortable, and the body both compressed enough to make for a good seal, but also not so soft as to over-compress.

I recently took them out for a running test which gave them a pretty good test of the fogging as well as the fit.

The certainly fit very nicely, were stable and very comfortable, but after about a km in, at 12kph, they began to fog up, and stayed that way, on or off, for the duration of the run.


I suspect that in a dry environment, they would probably work out pretty well, or perhaps if there had been more of a breeze, and a third party de-fogging treatment might well prove effective. It was a shame to find how fogged they became, as I can imagine in a hostile environment, or undergoing other strenuous activity (as I'd also found this to happen whilst doing some grinding and drilling and home) that this could be quite a risk to be aware of.

Still, I'd rather have some goggles than NOT have some goggles, and these will certainly have their place in my preparedness kit, to be sure. 

Review: Platatac GBH-R hat

Since getting myself a tandem AquaYak, we've been getting out on the Bay a lot more, and I wanted to get myself some sun-protection for under my bump-helmet.

My dad had kept his US GI Boonie hat when he left Viet Nam, and I swiped it, but it seems as I've grown both up and out, and it's too tight to really be comfortable these days. I'm guessing his short-back-and-sides gave him a bit more room than my ponytail does, too.

I'd seen the Platatac GBH and GBH-R and thought it was time that I updated my cover. (1968 boonie on right, for scale and reference.)

I went in and after some back and forth to get the right fit, I settled on the GBH-R (which has a narrower brim).

This is a feature packed hat. Hats have features, you ask? Yes indeed. so, apart from the obvious; fit and cover, which the GBH-R provides with a circular stitched brim to add stiffness, it also features a sew-in cord chin-strap, with a traditional leather cord-lock (I remember teething on my dads). Inside, a mesh lining with hidden vents adds heat dissipation and wicking to keep hot heads cool.

I chose the pre-dirty looking ATACS-AU for mine, which is made of the windproof Nyco ripstop (the Multicam version is 100% Crye cotton ripstop). You can see it here up against my Multicam First Strike Snatch Bag  which shows off the subtle patterns of the ATACS-AU, this is my first piece of this particular camo scheme and it is "street capable", in that it doesn't particularly -look- like camouflage, in the way Multicam or Auscam DPCU does.

The GBH-R also features a hidden internal shock cord retention around the brim, with cord-k at the rear to adjust tightness. 

There are a very robust set of branch-loops around the side band, which are bartacked onto the hat, and these are both well spaces and generous enough to stuff a variety of items, be they local foliage, spares, or even lures.  I plan on rolling a coil of paracord around mine, following Stormdrane's fine examples. 

Lastly, the GBH-R features a 35mm x 35mm loop field on the crown for IFF patches and badges. I have a glow in the dark patch on mine currently, helping me find it in the dark of a tent overnight, or the bottom of a kit bag. 

I tend to wear mine "sides up" with the chin-strap acting as a retention loop. The hat has stretched to fit nicely, especially helped by some hot weather tree-cutting I did, getting good and sweaty, which also proved the quick cooling and drying properties of the Nyco ripstop. The other thing I like is that the whole hat is fabric, meaning it is both lightweight and crushable; when not being worn it can be mashed into a pocket, or into a pack, then pulled out, flipped open and it's ready to wear. 

Review: Peruvian Fleece Cap

So, I've made no bones about my disdain for winter, and am always on the look out for more cold-banishing gear to add to my collection. This winter I added some long Nomex gloves to couple with my Harry 1.2 softshell jacket. However, I wanted something to keep my head snug and toasty. When in Canada I often wore a tuque and when living in England I had a hunting cap with ear-flaps so when, I saw these come up on eBay, I got a set for myself, and one for Omega too (who is still acclimatizing to Melbourne from Brisbane, 5 years on)

This is apparently a "Peruvian Wool Fleece Cap" patterned after the traditional Chullo. Im pretty certain it isn't wool, so lets just say that it is fleece. The cap is topped by six triangular sections, much like most fabric hats, but is edged with an asymmetrical band that includes the "ear-flaps". A cord-locked drawstring is sewn in to assist with retention, and to keep the flaps tucked up to your chin in especially chilly conditions.

I tend to roll the ear flaps up and cinch the drawstring in a little, because I like to hear my surroundings more clearly,

However, when up at the snow, or in just a bitter wind, I am only too happy to protect me delicate flesh and roll them down. 

The snug fit lends itself to sitting under a hood, such as in my Harry 1.2 jacket, or even under a helmet, such as my Ops-Core knockoff bump helmet.

Thankfully there have been few days this season where I've felt like I've needed this cap, but I am vey glad to have it, packed and ready, for when I did. A great camping and wilderness survival addition. 

I'm thinking of doing Halloween as Angry Finland...

Side note, my mother had kept my ear-flap cap, I passed it on to Tactical Baby ... RLTW!

Review: Shemaghs and Furoshiki

I had a request from a reader to cover the myriad uses that the Arabian headcovering, the shemagh (or keffiyeh, or ghutrah as I learned the word) has. Rather than just covering the one form of "big square of fabric" I thought I would mix in the very similar, but culturally diverse Japanese multipurpose carry-cloth, the traditional Furoshiki.

 Whilst fairly divergent in purpose, each style relies on the same thing: a single, square piece of fabric.

Fabric is everywhere, and whilst patterns, weaves, materials, sizes and shapes may differ, it is a fairly simple thing to be able to put your hands on. With the increased Western military presence in the Middle East (yes, its been 22 years since the First Gulf War,) this fairly ubiquitous piece of  Arabian attire has worked its way into the mainstream western culture. I lived in Dubai between 1989 and 1991, and the red-and-white ghutrah in the middle there was from then.

Starting up kendo in 1997, I was exposed to the use of squares of fabric to bundle up our keikogi and hakama, in furoshiki style, which allowed us to keep it neat, tidy, transport it and also letting the often very sweaty clothes dry after a hard session. At least, far better that it would if stuffed into a plastic shopping bag, or gym bag.

I wont spend a lot of time on furoshiki, as it is an art all to itself, rather I will show you a couple of links. This picture was produced by the Japanese Ministry of Environment as a means of demonstrating the many ways different sized packages and items can be bundled into a square of fabric, offering stable, padded and accessible wrapping for a variety of goods.



I've mentioned shemaghs before, as I picked one up off the street her ein Melbourne as part of my eagle-eyed urban-salvage mentality, but I have quite the collection of them. Warm in winter, shady in summer, easily stowable and highly variable in wear and use, the shemagh is a versatile and essential part  of being apocalypse equipped.

There are a variety of sites that can show you "how to tie a shemagh like the military"so I'm not going to go through a step by step, rather, I will show you some of the ways that I have worn mine, and that you might find useful.

Most of these involve folding the square into a triangle, which leaves the little dangling tassels on the short edges, rather than the forwards long edge. I learned to wear min in Emirati and Bedouin style, which usually consists of a single triangular fold, and topped with the double ringed agal but any cord or banding could suffice, and keep it on your head, whilst providing much needed shade.

Even without an agal, it is possible to keep it on your head in fairly easy terms. Just flicking one of the corners around your neck and towards the back will give it enough weight to hold it down onlt your head, and less lifting surfaces to blow off as easily.

You can wear it like this to cover your nose and mouth, both as a dust/sand/debris hand smoke filter, as a sun-block, but also to obscure your identity if that kind of thing is useful to you, say if you were throwing rocks at tanks in Gaza or new York...

I've worn mine like this in the sun, rain, hail and snow, and have found that it's a very versatile piece of clothing able to be adapted to meet the ever changing Melbourne weather.

Rolled loosely, that same triangular fold gives you a long length of insulating material I wrap around your neck, whether it be to trap heat in the cold, or soaked in water to give evaporative cooling to the wearer. In this way, it acts in similar fashion to the HeadSox and HeadOver tubes, but far lower-tech.

It's worth noting that certain colour patterns may be more significant than you might think, and it is well worth looking into when you are traveling, but there isn't really a hard and fast system in place. If in doubt, ask a local, or wear something in "modern" patterns.

Pulling up the front of that self-same scarf, you have a very functional face-shield to guard against identification, sun, dust, sand and debris, even some (it has been often claimed) dispersion agents like CS gas with a vinegar treatment, apparently.

 A slight tug and it's either up or down, and you can also cover your ears with the same fabric.

I've also used mine as a sieve, putting fruit in it and washing them through it...

Having also spent a bunch of time holidaying in south east Asia, I've seen similar fabrics worn wrapped around the head in a ring, more as a sweatband than as a sunshade. Worn with the tassels on the outside you also have built in bug-bothering dangles not unlike the mythical cork-strung hat of the Australian bush.



Not just a piece of clothing, however, the shemagh can be utilized in a variety of ways  (such as in its Japanese configuration, for furoshiki) and I hope I can show you a couple of these too.

So here is me having using my shemagh as a triangular bandage to immobilize an arm, something I covered recently in my First Aid Certificate Level 2 course (yay, skills ...)

Depending on the circumstance, and the need, this can be done extremely quickly. I moved from the SE Asia head wrap to this sling in about 15-20 seconds. If you take a little more time, you can make a much neater, much more supportive sling.

Similarly, I could have rolled it into a tight rope, and used it as an emergency tourniquet, or as the binding of a splint.

Other uses that I've had for it is as a shade cloth, picnic tablecloth, as a belt, a child-toy-leash and as a mondo wet-towel-snapper.

When folded up, a cotton shemagh makes a quite reasonable bandage, either as a deep square, to stem urgent bleeding, or to hold down dressings. Filled with ice they make cold compresses, left alone they make good padding for bruises, sprains and bites.

All in all, whether it be for headware, packaging, or all manner of other applications, this simple piece of cloth, however it is names, coloured or decorated, is an essential piece of kit, that I wouldn't want to travel or adventure without, let alone survive without.

Review: Ranger Eyes

I've been fascinated by glow in the dark products since I was a little coyote pup, and have had no end of fun with them. From ceiling stars to a Swiss Army Knife, I'm a sucker for that pale green glow. I've passed this joy on to Triceratops Girl, who got a SARGlobalTool Moon Glow disk for Giftmas, to go with her dinosaurs. Then comes the Ranger Eyes / Cats Eyes patches concept. Traditionally I've read, Ranger Eyes have been used to help identify friend from foe during night missions, before the prevalence of IR NVG and reflective tape and certainly in lower-tech and power consumption conditions, (and where legally difficult to obtain) there these patches make it easier to follow members of your group under the cover of darkness.

I thought I might quickly showcase some of my collection of ranger eye patches, which I exposed to the Australian summer sun for about 2 minutes (rather than the recommended ten) to take these quick shots in the equipment closet at work. At the top left and right, my Giftmas present ITS skull logo patches. These were a lot thinner, and made of a white rather than green glowing polymer. The didn't quite have the intensity of the other patches, but that's a good thing some times. in the center, the HorNest logo patch which was larger, and by far the brightest. In the bottom corners, the TAD logo and DogPatch Ranger Eyes. I lost one Dog Patch x-bones patch somewhere along the lines, but I really like these little guys.

I currently have the HorNest patch on my 215Gear Ultimate Riggers Belt, the ITS patches sitting on the ZuluNylonGear CAOS Admin pouch which in turn rides atop my BullockEcho daypack, giving me another piece of "see me walking" visual aid from behind. The two TAD patches ride on my 25th Anniversary Platatac Cap and again, give me some "out and about" visual options.

I've found these patches really good when I have stayed over at friends and needed to find my gear (or my pants) in the dark, late at night, or early in the morning .....

Review: Platatac - HeadOver

As summer approaches, we get some very changable weather in Melbourne, even more so than the rest of the year. Some days blistering hot, some days chilly and wet. Still days, windy days, wet, dry. But mostly windy. I like to keep a hat in my bag as a part of my EDC, as sun-exposure and skin cancer are no-ones friends,bu t there are times when a hat just wont suit the conditions.


It's time like these that I opt for a bandana, wrapping my head and hair out of the sun and wind, and giving my neck some needed cover, however, even the ubiquitous bandana won't suit all the time. they shift around, come undone and generally fail when most needed. That's where head-socks come in. More adaptable than a beanie, more structured than a scarf or sehmagh, I really like them. I have reviewed the HeadSox brand offering previously.
This however is the Platatac PolyPro Headover .

This lightweight tube of stretchy polypropylene fabric runs at 50cm long by 40cm in circumference, putting it longer but a little bit more narrow than the HeadSox version.

A single seam along the middle makes the tube, but both ends are hemmed neatly, making this a tidy little addition to my collection, especially when I don't want any snagging options. As you probably know, I fall into the longhair Viking side the "grooming standards", with "high and tight" but I've always seen this as part of my warrior heritage (and I'm sticking to that!).

It does leave me with complications on occasion.
Getting my hair hung up in packs, vests and slings is really annoying, and truth be told, probably a safety risk. However, I've managed to go this far without getting into too much strife with it, mostly because I pony-tail it or braid it.

The other option, like I've mentioned, is bandana's, hats and headsocks. Here's how I like to wear my Platatac HeadOver:

As a neck-warmer, note how it drapes low, all the way to my collarbones. Very good for adding chafe resistance to vests and slings!

Doubled over, it acts as a cap, wrapping and shading my head, and keeping my hair out of the way, and secured. In this fashion, it acts as a turban, a very effective and simple form of hot-weather headgear that has been worn for millennia.

With my hair pulled through, it acts like a bandana, as well as a hair-channel. To get it on like this, I pull it all the way over my head to my neck, then drag one end up and over, catching all my hair, and ears, giving a slick and tight cover. I wear this when I have to wear a hat or helmet, but want my neck uncovered (or just want my hair managed). This gives the most breeze flow and wicking contact.




When I want to go "full tacticool", nothing beats the open faced balaclava, with one end pulled up over the ears and nose, with a hat over the top, you have maximum sun/grit/wind and identity protection,  the same neck abrasion protection of the neck-warmer "mode" and look like a bad-ass khaki ninja to boot.

For all my silliness with this, the HeadOver is a great piece. Maintaining protection from the environment and avoiding exposure is a critical element of any survival plan, and a simple, lightweight and versatile piece like this really adds to your options, at very little wight, bulk or fiscal costs.

Events: Stampede Run

I've talked quite a bit about my training and get-up for Tough Mudder that I ran in May 2012, and I think I got the bug. I also challenged myself to the Stampede.

The course was divided into a 5km run, and a 10km version (splitting off at the 5km mark, and rejoining for the final few obstacles.

The Melbourne 2012 run was held at the the Glenbrae Equestrian Centre in Wandin, and made good use of the site and facilities.


Under and Overs - log crawl and climb
Rope Tango - mud crawl whilst pinned down by a cargo net
Human Window - climb though odd shaped holes
Wrecking Yard - crawl through, over and on top of wrecked cars
Ice Bath - wade through and dunk in an ice filled pool
Bus Stop - climb over cargo netting up and over a bus
King King - big pile of tyres
Spiders Web - climb through a stand of trees wired with bungy-cord
Giant Slip and Slide - a long, long water slide into a pond
Trauma Tunnels - Crawl through piping and squirm through flat plastic sheeting
Sand Blast - do a circuit with a sandbag
Quick Step - run through flat tyres
Hay Stack - climb over giant rolled hay bales
Devils Cave - a darkened shed with falling water, and hay bales
Cable Chaos - climb over a series of stacked cable spools
Gladiators - run past a gauntlet of pugil-stick and boxing pad armed opponents
Tunnel Under - climb through tunnels
Dumpster Jump - climb in and out of a set of dumpsters (one with apples)
Half-Pipe - Scale a high sloped ramp
Sunday Roast - run over fire
Mud Buffet - crawl under barbed wire through mud
Bug Zapper - dangly cable filled hall some of which running with 10,000V!
As well as these, there were numerous stretches of thick, gluggy mud. and wading through murky ponds, and the occasional equestrian hurdle.

copyright to Supersport Images Pty Ltd  

This is my taking a leap over the bonnet of the last car of the Wrecking Yard. It was obstacles like this, and the crawling ones, that made me choose to wear my BlackHawk! Advanced Tactical Knee Pads v2.0 I've had these for a while, and they have done good service, although I have skinny legs, and found that they did slide a little being on bare skin, when I was crawling through mud-filled tunnels. I wouldn't have wanted to go without them though. Wearing suggestions anyone?

copyright to Supersport Images Pty Ltd   

This is me wading through the barrel filled dam, I wanted to give some of my other kit a good solid workout, and opted to go with my First Spear OAGRE vest, that I got from the folks at LEGear. As well as being well fitting, and totally as rugged as I have previously reported, I found that the belt-ties ensured that I didn't have to worry about my shorts coming off, and gave me some significant rash-protection when rolling over and crawling through obstacles. I also ran with some patches: A TAD logo Ranger-eye, I also wore my Stargate LRP nametape, to see how that held up and my ITS "Crew Leader" Tab. I pinned the Stampede ID number to the MOLLE, rather than using the sticky label, knowing the challenges it would be facing. On the back of the OAGRE I laced my "Zombie Control Officer" laminate, for a bit of fun, which got a lot of cheers as I passed folks, and the Tough Mudder patch on the back, under the drag handle. The 3L Source bladder that came with my Platatac Bravo pack fitted pretty well inside the OAGRE.

I also changed what I wore on my hips. Lesson learned from Tough Mudder earlier in the year. As awesome as my Survival Utilikilt is, it is not optimal attire for an endurance obstacle course like this, which is why I was so pleased with the new addition to my clothes-pile, in the TAD Gear Amphibious Cargo Shorts. As they were new, I didn't want to risk running-rash, and wore some boxers under them. Useless, they waterlogged and sagged. I would have been better off going my usual commando. Great shorts, fast drying and mud-shedding, comfortable and good for adventure!

copyright to Supersport Images Pty Ltd 

I opted for a hat over sunscreen, which gave me somewhere to mount my Contour GPS, in its waterproof casing, as well as keeping my hair out of the way. I wore my Platatac Tactical cap, which also somewhere to out my MSM "Zombie Hunter" patch. The Contour in its case assed quite a bit of asymmetric weight to one side of my head, I think mounting to a chin-strapped bump-helmet will be my next option. I also wore my Headsox scarf-tube, which helped keep the sun off my neck, keep the vest from chafing and also as a smoke filter.

I wore my Platatac Punisher-Skull logo CUS shirt which was a dramatic improvement in comfort over the Jackeroo safari shirt I wore for Tough Mudder. It dried, it breathed, it wicked, and was pretty bad-assed to boot!

I kept my delicate hands safe from harm with my trusty Ironclad Landscaper gloves.

So here I am at the end of the race, having crawled under barbed wire covered mud and been shocked by electricity over and over. I wore my much abused Altama Tan Desert Mil Spec boots, veterans of years of summertime wear, Stargate LRP and the Tough Mudder. This may have been their swan-song.

I did the 10km course in just under 2 hours, keeping a pretty constant pace. I'm not fond of running, it hurts, but I managed to jog pretty much the entire course, giving aid to people who needed it, and taking my time. I loved the obstacles, was happy with my effort, and the little preparation I did to be ready for it. Since May, I've gone for perhaps 4, 8km runs at lunchtimes at work. I feel that I am able to get from A to B in good time, regardless of the obstacles in my path.

Review: Platatac/Gerber branded cap

Ok, here's a quick one, to keep you interested, and keep me in practice.

This is a promotional item that came with a deal when I purchased my Gerber Strap Cutter and I must say, it's pretty cool. Ok, so it's just a cap, there isn't all that much to it. Yet, there are a couple of things still to say. As well as being well made and solidly put together, with a nice fit on my hairy head, and a good bill-geometry, the front of the cap features a hook-and-look loop field which has Gerber branded embroidery directly sewn through it into the body of the cap. Great for morale patches, or in fact, attaching laser-tag sensors for when I go Stargate lasertag LRPing. Along the sides of the cap, in subdued colours are the Playtpus Outdoors  and Platatac logos and an Australian (and/or New Zealand) flag on the back. All beautifully embroidered. The cap itself is a darker green than their usual khaki, but still a nice shade, I thought.

So, why does a hat matter? Several reasons spring to mind. Head covers reduce your exposure, to the elements, be they sun, snow or rain, and also to unfriendly eyes. Shiny foreheads, bright flowing locks, distinctive faces and the like can give your away at times where not being seen is an advantage, get in the way or just let the sun rain or dust get in your face when you need to be "eyes-on".

I always pack a hat, it's a little thought of element of your EDC, serves a variety of functions and rarely draws unwanted attention.