Review: McNett - Gruntline

The Gruntline - braided rubber goodness

As first seen on BreachBangClear. Inexpensive and useful they say, just like me!

Here's an unusual bit of kit that I've recently added to my regular load. I've covered a number of uses for paracord previously, and it's pretty ubiquitous in the preparedness world, but it lacks in some areas. It has very little give, over short lengths, but has a minimum 30% elasticity over long lengths

Usually for smaller elastic jobs
you could use shock-cord
but it's usually not up to big tasks in small diameter cords seen on gear. The usual alternative is to use the metal hook-ended bungee ocky-straps but these have a long history of being flying eye-ball gouging flails of doom.

The Gruntline - Boots, blades and baggies

The good folks at McNett have come up with a solution, the GruntLine. Consisting of braided natural dry rubber tubing, with cords affixed at either end which in turn end with plastic clip hooks. The line is 1.10m (43") long, all told but when stretched out, it will reach up to 2.15m (7'), when all played out.

The braiding gives you as many no-peg points where you can feed and bind up whatever you are wanting to hang. It's just a matter of feeding a part through the braid, and it will bind it up and hold it pretty tight.

The Gruntline - MOLLE storable

The Gruntline is rated for up to 9kg (20lbs) of gear, although the braid-feeding of any single items wont come near to bearing that load, (but when taut they hold tighter). It will hold as many items as you can fit it with, up to that weight limit. I don't know how well the cords are attached to the webbing, as they are secured under loops of rubber, so might be a potential weak point.

As well as acting as a clothesline, and a gear suspender the Gruntline could be put to any number of other uses. McNett also suggest it can be used as a lanyard, and gear retention, but also as a tie-down strap, pack strap. I have been keeping mine fed through three loops of PALS/MOLLE on the side of my pack, so I can have it on-hand wherever I go. They also suggest it could work as an emergency medical tool, for use as an arm sling, I.V. support and even as a tourniquet.

The Gruntline - wrap that hat and conceal your melon

You could also use it as a slingshot elastic, an animal snare and as a natural camouflage holder, much like the netting on a helmet or as part of a ghillie suit.

Those same braids that can be used to secure foliage and other materials to break up your silhouette and conceal yourself. It loops nicely around a hat, so should serve this use well. Even crisscrossed over a pack, or the like, it would give good purchase to attach your foliage coverage. The downsides of the GruntLine are only few; the plastic clips on the ends are pretty narrow, and don't open wide enough to clip over some of the points I tried to use, and there is always the worry that it might give out, or the cord used might give out. However, I've had no such trouble so far, and kept both my eyes, so there is that.

Review: Tactical Tailor - Concealed Carry Sling Bag

This is the second item in my series for David Reeder of KitUp! and Casey Ingels of Tactical Tailor, and I am thrilled to be getting my hands on another pre-release item, which made it's way over the Pacific to me here in Australia. Due to be released later in March, hopefully this review will stir your interests and imaginations.

I'm always keen to include inconspicuous items to my repertoire, both in my EDC, and how I go about lugging it. Recent air flight trips reminded me that having a high density and easy to store carry-on bag is very desirable. My trial of the Zombie Outbreak Hydro Pack was a good experiment, but when it comes down to it, I want something rock solid. I am happy to say that the Concealed Carry Sling Bag by TacticalTailor is that. Made predominantly from a 500d Cordura, in blue-grey and black, this is a sporty looking pack that has a sting in its tail.



This is an ambidextrous pack, with a single central main padding shoulder strap, with twin detachable straps, with an interesting styled clip at the end of each, anchoring to a ring at the end of the shoulder strap. Each of the detachable straps features a long webbing, sufficient to create a "third leg" style wrap around connection, to keep the pack stable on your back when running, climbing and generally adventuring.

The shoulder strap is heavily padded with a breathable mesh covering, giving both really solid padding, broad coverage over the shoulder and a wide attachment to the body of the pack, giving a very stable connection. The top of the strap to pack connection also features a very sturdy carry handle. It appears to have a Helium-Whisper compatible loops down towards the strapping end, but I don't have anything compatible to test that out on.

Another nice feature is that both detachable straps have a padded "wing" for where the webbing would otherwise dig into your kidney, both of which have webbing stitched in, not quite PALS/MOLLE proportioned, but certainly compatible, if you wanted to affix an accessory. Topping it off, there is a pocket behind the wings on both sides to stow the detached strap, if not being used as a "third leg" to get rid of dangling cords for a more streamlined fit.

Inside the main compartment, which has double zipper pulls, each with a hefty cord pull-assist, which works to give out a full opening compartment, which as you can see can fit a variety of goods. When filled, this compartment nicely fits the depth of my Zombie Squad Nalgene, so that makes a good guide for how much stuff you can lug in this section.

Inside the front compartment, which is fitted with a long daisy-chain of webbing loops running vertically over it's surface, and sporting another two cord-fobbed zippers for closure, you'll find the first of two hidden surprises is pack had to offer. Fitted to the loop field that makes up the entire of the back surface, is an adjustable pistol holster. This hook-backed panel loops around on itself to give an adjustable width, and has an accessory strap to accommodate the length of your pistol. Off to the side of the panel is an elastic loop to hold a spare magazine. I've not decided what I will use this holster for, not having a pistol to carry, myself, but I'll be sure to find something to use it for. This compartment easily holds a Nalgene bottle, with some spare room at the sides.

At the very back of the pack is where the real secret lies. Behind a very inconspicuous zipper, blended right in with the seam of the grey Cordura and the meshed-foam backing is another cord-fobbed zipper, (one for each side of the bag for true ambi action) is the final compartment, held snug against your body, for the concealed carry win.

Again as with the front compartment, this has a broad loop-field panel, encompassing the entire back, and comes with a very thorough admin panel, but this can be fitted to the front compartments panel, swapping out to suit your needs. Currently I am keeping my iPad in is compartment, until I can think of a better use for it, but as it is, it's a very secure and stable storage pocket, with a billowing inside backing to accommodate your packing needs, without giving away your secrets.


Here is that admin panel, showing off its five internal elastic webbing loops, for pistol magazines, flashlights, multi tools or a variety of other chunky items. On the outside, two more wide elastic loops run lengthways, each topped out with a second, narrower elastic bang, sectioned into two, ideal for pens, glow sticks and markers. Finishing it off is a zippered pocket, giving you a very versatile and being hook-backed, modular piece of accessory to suit your needs and loadout.



Lastly, here's a shot of me having slung the bag from back to front, showing off how level it rides. From here I could quickly access all three compartments with a yank of the cord-fobs, and get at my needfuls. Ideal in a travel situation, ideal in a hazardous situation. When I'm hauling a big load on my back, but still want access to my iPad, papers, food or EDC kit, this functionality, being able to have a comfortable, slung pack at my belly comes in very handy. Whilst a bit too small for my comfort as an everyday pack, (because I haul a lot of junk around) my partner Omega was quick to snaffle this one up as an out-and-about pack, that wouldn't weigh her down, be too "hooah" looking and tough.

This sling bag is all of that. And more.

Review: Strike Industries - Vertical Loop sling mount

In my quest to build myself a lasertagger for the Stargate Lasertag LRP that I am involved in, I have been accessorizing the tagger that I already have access to, to add to the "look and feel" of the simulation that we do.  One of the things I've found is that most of our home-made taggers lack the kinds of built-in sling-mounts that one would find on a real firearm, which makes mounting a sling problematic.  The electronics-filled MDF bodies can still weigh quite a lot, and because we are cabled into both the sensors and the controller-box, its not just a matter of "putting the tagger down" to do something, you are literally tied to your tagger. 

Rather than drilling an additional hole to put an eye-bolt, or the like in, or going full-ghetto with cable-ties or webbing I wanted to see what I could find to do it "right".  Because we put rails on the tops of many of the taggers to add red-dot's and the like, I realised I could make use of one of the  Strike Industries - Vertical Loop sling mount to give me my attachment point!
This piece of hardware spans two of the rail "ridges" with a bolt securing it. Simple enough as a concept, but the proof is in the engineering, as the case may be.

The body of the mount is of a T6 6061 aluminium construction with a hard anodized matte black finish. The securing pin is steel, but the real utility comes from the mounting ring itself. This spans both sides of the Picatinny MIL-STD-1913 compatible rail and is split to allow it to be tensioned firmly to the rail.

The loop itself is very cleanly machined, with no places to snag or catch, and is amply dimensioned to accommodate the paracord loop or harness snaps of a variety of sling attachments. Here I have it attached to my 215 Gear Sling.

Being completely adjustable, it is possible to move and reposition this sling mount anywhere that features two rail ridges.


This is a low profile, light and sleek accessory, perfect for what I needed, and is certainly fit for purpose.

I look forwards mounting it to my purpose built laser-tagger, once it's built.

Review: Strike Industries - Tactical Sling Catch

Image swiped from Strike Industries

Here is s great little accessory I picked up recently, that I wanted to share with you all. I saw this reviewed by the great guys at Jerking The Trigger and Soldier Systems and whilst this puts me pretty far behind the pack, I don't mind, because basically, I'm a hobbyist, and my "what if" postulating is a bit distant from what most of their readers face. However, this is, as I said, a great little accessory.

Here's the situation, you have your item of choice on a sling, over your shoulder and across your body. The strap may have padding, it may be nice, soft nylon tubing, or may be a strap of heavy canvas. Either way, you are lugging important and precious kit on a strap that is using your neck as a fulcrum. No matter how soft, wide or padded, once you get moving, it sways, bumps and begins to chafe, saw, pinch or dig into your neck.

That becomes a lingering distraction, uncomfortable, and consistent. You've got a pack on, a chest rig, or some kind of vest, because that's what you're loaded up with. That just adds to the problem. What to do?

This is where the Tactical Sling Catch by Strike Industries comes in. What they have produced is a piece of reinforced PX polymer, which forms a hook to keep your sling up off your neck, and bear its load.
The catch is light and just flexible enough to be resilient enough, but stiff enough to carry the weight of your slung item of choice, be it a 35mm Cannon or the most specifically, the lead-spitting kind. The catch has three main components, the primary of which is the outward facing sling catch, which is broad, deep and tall enough to accommodate a variety of slings securely, without being a snag-risk for the environment as you move about. Two loop wells allow the twin 6" hook and loop strips to be fed through to attach it (More on this later).

The "outward" edge of the base plate has on its underside a harness retaining hook, two wedge shaped projections which catch the edge of whatever you mount the sling catch to, and help keep it from sliding inwards towards your neck. I found this secondary retention really assisted when I put a load on my 215 Gear sling. I had worried that the whole sling catch accessory would just rotate around on my shoulder piece, but with that retainer, it held fast. Under the base plate were six little spikes, which further added to the stability of the catch.

The primary means of attachment however is the two strips of hook-and loop supplied. One hook, one loop field, each 6" long. This gives enough room to wrap through the two loop-wells, around the shoulder piece, and back onto each other to give a very secure, adjustable connection. You can see here that I ran those strips through the PALS/MOLLE loops that were on the top of my rig's shoulder strap and from there, cinched it up tight under the shoulder strap. Lateral and horizontal movement halted!

The PX plastic is low-friction, and well molded, with rounded edges and wide angles wherever there will be sliding action. I found that I could move my sling around freely, remove it smoothly, and bring my item of choice up to bear quickly without even noticing it was there. When jogging about, ducking, weaving with the sling slack, it stayed "mounted" and didn't slip free, so that when I then when "hands free" the catch did its job smoothly. Similarly, when I had tension on the sling, bringing to bear, the sling catch was doubly useful, as it did indeed keep the sling off the side of my neck, and kept me from yanking my head, or chafing my neck.

I'm really impressed with this catch. I can recommend it to anyone who wears a sling for any length of time. My big-lens camera weilding soul-sealer friends might be just as interested as my "running about in cammo" friends. I can see these being useful to the hiker, tourists, camping, or anyone who has to sling something for extended periods of time. I'm thinking of getting a couple more, to affix to my bags and other rigs. Well worth it.