Showing posts with label 5.11 Tactical. Show all posts
Showing posts with label 5.11 Tactical. Show all posts

Thursday, September 21, 2017

Home Front: storm's a commin'

I'm really proud of this post, which I'd delayed publishing for logistical reasons, but found out had been picked up by 5.11 TACTICAL, as a "Breach-Bang-Clear Senior Staff Contributor" , which I am doubly proud of! So, without further ado, here's my take on being ready to be smacked with several mega-storms one after another.

Recent meteorological events in my old hometown of Houston, and the subsequent humanitarian concerns that came with the destructive flooding being experienced in the lowlands of Houston, have all gotten me thinking. Irma GERD is hitting Florida and the Caribbean, and... Well piloted, Captain, Delta DL302!



I've had the good fortune never to have had to evacuate an area, though my family's rapid departure from Dubai on December 31, 1990, some three weeks before one of the grandest fireworks shows in history happened just over the horizon in Iraq, was close. I've also had the need to be ready to go, when I lived in the forested Dandinong ranges following the black Saturday fires of 2012. However, frequent moves and travel while growing up equipped me with a certain mindset. Pack light, take only what you can carry, and carefully choose what valuables you really need. When things took a turn for the worse for me emotionally at the end of my marriage, I packed bags, loaded essentials in my car and was out of there that same evening. Better for everyone in the end. I was lucky that some good friends of mine had a spare room and the open hearts to let me crash with them for a couple of months so I could get my life in order. I'm deeply indebted to the Moffits and will be for some time.

I'd hope that if I lived in a disaster-prone area I'd be ready whenever hurricane, cyclone, tornado or volcano season rolled around, and not only would I have a bugout destination but also a route and plan. However, nature gives not one damn for me or my plans, nor (I suspect) for yours. It's up to you and me to rescue ourselves.



The Houston floods have shown that freak events can essentially turn a modern metropolitan city off, and reduce it to third world status. Without wanting to go into the politics of civil engineering and infrastructure shortfalls, I think it's fair to say that while some of what was happened in Houston or New Orleans could have been mitigated, nature will find a way. So what can we do about it? I think the answer to that is threefold:



1) Threat assessments;
2) Risk mitigation & planning; and
3) Practice.

1) Threat assessment.

Where I live several state and federal agencies exist to deal with this kind of thing. The SES (State Emergency Service) and CFA (Country Fire Authority) have great resources available to determine whether certain areas are at risk from fire or flooding, and can deal with those threats. Victoria has occasional very mild earthquakes, nothing to brag about. We do occasionally get heavy storms pushing up from the Antarctic but again, pretty mild compared to the North Sea gales or Atlantic hurricanes. We're well too far south for any tropical action, unlike our Queensland bretheren. We do get some big winds and heavy rains occasionally though, so in the Hills (to call the Dandinong ranges mountains is generous) power is often cut due to tree-falls. A caved-in roof during a winter storm is never a good thing, nor are washed out roads. In the lowlands that water has to go somewhere, and we are pretty lucky in that current and former governments have maintained infrastructure to deal with it. However. Knowing is the first step.

Melbourne Water is proposing to update existing planning controls for land in Bayside that's susceptible to flooding. The controls, called the Special Building Overlay (SBO) and Land Subject to Inundation Overlay (LSIO), aim to ensure that land covered by the overlays is developed in a way which reduces the potential for flooding and minimises the risk of flood damage to property. Since the planning controls were introduced in the early 2000s, Melbourne Water has developed better mapping and more accurate flood modeling. As a result, the SBO boundaries are being updated and the LSIO removed from the Bayside Planning Scheme.

The changes to the boundaries of the SBO mean that some properties will be within the overlay boundaries for the first time, some properties will no longer be covered, and other partially-included properties may have more or less of their land covered by the overlay.



For properties within the SBO boundaries, a planning permit is required to construct a building, carry out works and subdivide land. This enables drainage and flooding issues to be addressed early in the development process by, for example, raising building floor levels. It also ensures that flood waters are not obstructed or diverted by new development, causing an increased problem for existing development.



2) Risk mitigation & planning.

What are my big threats to house, home and family? Well, my ex-wife and our 9-year old daughter live in the Dandinongs, in the midst of very tall trees in the temperate rainforest. There is a summertime fire risk mitigated by maintenance of the grounds to remove deadfall and reduce fuel sources, plus they have an evacuation plan and use the CFA fire-risk scale system as a guide and routinely "get off the mountain" in times of high risk. In winter they face storms and damage from runoff. Frequent power outages are a hassle, especially as the water to the house is via an electric pump from a rainwater tank. Landslides are a potential risk but more substantial is the risk of a tree falling on the house. Aggressive tree felling is not much of a solution given the local ordinances. When I collect and return our daughter, I'm mindful of the risk of roads being cut by treefall and associated downed power lines or washed out roads, but day to day it's not much of an issue. In the case of my own home, having checked the floodplain maps of the Melbourne Water Board, I can see we're just outside a predicted 100-year flood area. One end of our street is not though, so I'm going to err on the side of "Yep, we'd flood."

Where I live is fairly suburban so I don't have to worry about bushfires come summer, but we're not far from the beach, just above sea level, so a hefty storm surge could potentially reach us. I don't worry about a tidal wave as the Port Phillip Bay is shallow and protects us from the Bass Straight, so anything big enough to cause a tsunami would bring its own special dooms. Knowing that, if a big flood event was coming, or even imminent, our best bet would be to pack up and bug out. The house, being old and rickety, couldn't be trusted to withstand even a knee-deep flood, let alone the hip, head or street sign deep waters as in Houston.



The question then becomes "what to pack?" Assuming the house would be a write off and most of our possessions would get trashed it might be tempting to try to take everything, but that's just impractical. A moving van would be needed and would take a day or two to load up anyway. Alternately, in a "do it NOW" situation, the decisions become easier. Only the most valuable and irreplaceable things would go, as well as things needed to get us through the disaster. Photo albums, back-up HDD's and some heirloom antiques are a good start, along with some important legal documents: deeds, birth certificates, divorce papers and the like. Clothes and day to day essentials like toiletries and medications are no different from any vacation packing and need to be weather appropriate. We'd be bugging out in my Toyota RAV4, not much of a bug-out vehicle but comfortable even crammed full of family and gear when we go on our camping holidays, so we have an idea how to pack it. This brings me to one of my bug-out or camping packing tricks.



Tactical Milk Crates. These seemingly ubiquitous, stackable, skletonised plastic boxes, designed to carry sixteen 2L jugs of milk, are often repurposed as student household furniture and storage. The modularity of these makes them good for packing anything small enough to fit. They'll hold 42 regular 420g-sized cans. That makes for 17kg of beans and diced tomato, in one big water-insoluble brick. That's a lot of meals. Two people could carry it fairly easily between them.


I also pack my camping gear in them: hammocks, lanterns, propane store and fuel canisters, pots and even pans. I have one for sleeping bags, one for power generation technology and one for "household" camp-accessories. Coupling this with our big-assed tent and camp bed, I'd say I could bug out in relative style with my whole family using about six milk crates of gear. The boot of my car can fit none to twelve crates with relative ease, so that leaves us with, let's say, three to six crates worth of refugee loot we can pack and go with, less if we pack extra food and water .



Given those numbers, each member of our four-person family gets about one crate of space as their allowance. Extra space can get stuffed full of blankets and jackets, filling all those gaps and pockets with padding and the like. One thing to note is that milk crates, being skeletonised, are not even remotely waterproof. Lining them or wrapping them with heavy duty trashbags should do the trick, and includes some trashbags in your gear by default.



As an addition to our bugout plan for floods, we have my two-person kayak. Having a non-wading means to cross waterways is key. We have maritime-rated flotation vests for everyone in the family, especially the kids, plus helmets, be they bump or bike helmets (remember: expanded foam floats). Rope and climbing harnesses don't go astray either, and I figure I have enough rigging gear to set up a rope bridge over any river narrow enough to sling one across. Take a page from the SES floodwater guidelines: "Never drive ride or walk through floodwater - if it's flooded, forget it."

Have a go-to destination in mind, maybe more than one, and plan out different routes, in case of traffic snarls, cut roads or bridges or obstacles to your egress. Keep your vehicle fueled and fit for travel. Stock up on packable food. A couple of bricks of cans at your local big-box produce store per trip will put you in good stead.


Bear in mind that in most cases the milk crates yo use stacked behind a grocery store are not abandoned but remain the property of the milk company. That's why I suggest them as as evacuation expedient solution. Should the situation arise getting it done is key. There are commercial options for packing gear, look into those if your budget allows.
http://modernfarmer.com/2013/08/illegal-use-milk-crates-anything-besides-milk/

3. Practice

Evacuations are not easy things; they're panicked, rushed and anxious times. Much like in combat, fine motor skills will be affected, rational thought will be interfered with. Kids will cry. Things will be left behind. Organize your bug-out kit early and have it sorted and ready to go. The more you can do early, the better off you'll be under the pressure of "time to go!" Remember, it's going to be harder if it's night, or storming and wet, more so again if the water is already at your ankles or the embers are falling.



There's no harm in doing dry runs either, especially if you can get the whole household in on it. Packing for a camping trip is a great opportunity to do so, with the payoff of the trip itself and "let's get on the way quickly" as incentive. This needn't be a "duck and cover" air-raid drill with stopwatch and sirens but instead some trial runs, from a dead stop to a "half the gear is already packed." I'll let you gauge how long it will realistically take you to be on your way, with the barest of essentials from when you decide that your position is no longer tenable and it's time to make a move. Make tasty meals from your stashed bug-out meal ingredients to get a handle on what you can do to keep morale up whilst on the go.

Lastly, have plan for your pets. Take them with you, or set them free to fend for themselves, whatever your conscience allows.



Be safe out there, and be prepared.

Monday, September 7, 2015

Review: maybe 5.11 Tarani x14 karambit


We have friends who heard that I have a thing for knives, and fixing broken things, and they send a mashed karambit they were very proud of my way. It looked like it had been stood on, popped the main blade fixing screw, and some of the torsion spring and locking mechanisms had bent and warped. The belt clip had two missing screws, but the blade was in good shape, if a little blunt. I got out my TORX screwdrivers and set to work.

Once I found a spare main fixing screw I had in my parts-bucket, and bending and hammering the frame lock spring back into shape I was pretty satisfied that I'd rejuvenated the blade back into a functional state. The thing was, even fully screwed together, it seemed ... wobbly. I held it in my hand and looked at the 5.11 logo and Tarani branding and thought to myself "is this something that Tom Davin would have released?" I had some serious doubts.

I did a web-search on the listed data "5.11 Tarani X14 karambit" and all I came up with were Russian language YouTube reviews, and an Ali Express listing for a 5.11 Tarani x14 karambit.

I asked Omega for the 5.11 CUB Tarani Karambit that I got fer her a couple of years ago and held them side by side, the difference was immediately obvious. Even if the "x14" was an entry level, budget version of the "CUB", it just seemed too different, with a torsion spring rather than a linear liner lock. The molding of the scales was also a little bit off, not sharp enough or well finished enough to be a match to the 5.11 logo.  The scales and the frame were also not fully flush.

That might have been because of the damage it had sustained, but it seemed more likely, due to poor construction in the first place.

At full length it makes a 16 cm (6.3") arc, with the blade making up 7 cm (2.7"). At it's widest, the blade is 2.8 mm thick, and made out of 440 steel, half serrated for extra bitey cutting needs, and is apparently hardened to a 55 HRC rating. The surface is oxidation coated, for rust prevention, and marked with a very convincing 5.11 logo on one side, and the Tarani logo on the other. Weighing in at 120 g (4.25oz, it's quite light and lithe in the hand, the ring-loop fitted me well, although the gaps within the frame meant that if I gripped tightly, they could have dug in.

Its a nice enough knife if you're not looking for reliability, or quality and want to look badassed with your karambit. I will happily address my thoughts if 5.11 get back ti me, but overall, my impression was that this was a poorly put together piece.

Wednesday, August 6, 2014

Home Front: LEGear - 5.11 concept store

One of the places I look to for my kit is LEGear, an online store for Law Enforcement, Military and Outdoor products in Australia and New Zealand, who refer to themselves as a  “One Source – Total Solution Provider” for government needs. In June they opened a third brick-and-mortar store, this time in my home town. 
In both a soft-launch and grand opening, the good folks from LEGear, opened their doors and hosted a BBQ, as well as spending time answering questions about their stock.  

I have covered a bunch of kit I've bought from and/or received for review from LEGear before, such as my much loved First Spear Oagre vest, a pair of Blackhawk pants and shirt. I sought out the LEGear team at the SSAA SHOT show and met up with the folks from Fenix through them. 

It turns out that the Melbourne LEGear store is also a 5.11Tactical  Concept store.
Avid readers will also recall that I have a soft spot for 5.11 gear as well, with a collection of their ATAC A1 flashlight,  the CUB Karambit and several different styles of their pants. I also got to meet 5.11 CEO, Tom Davin, who was responsible for the Tactical Kilts going into production. Was a real treat to talk to him, and even got to put in a request for Kryptek as the next pattern choice they might look into.

So, all you Melbournites interested in the full range of 5.11 Tactical gear, from boots to bags, belts and clothes, as well as Fenix lights, and Benchmade blades go check it out! 

A full range, all the colours and sizes on hand.

Boots, Boots, Boots.


Wednesday, June 18, 2014

Review: 5.11 Tactical - Tarani CUB Master 2.0 Karambit

I am always pleased to be able to provide my loved ones with some cherished pieces of kit. My partner Omega was delighted to add a NukoTool Skully keyring to her keys, and last giftmas I was able to procure this beauty for her purse. She has a penchant for back-swept blades, and I wanted to get her something she would enjoy.

This is the 5.11 Tactical CUB Master 2.0 (Combat Utility Blade) which is part of their Tarani line. There is really something to be said for the claw like lines of the Philipino karambit and its simple functionality, even for something of an exotic design to Western sensibilities.


I was impressed with both the slight weight, at about 150g (0.35lbs) and easy size in the hand. The blade itself is only 7cm (2.87") long, which opens with an ambidextrous skeltonized opening in the back of the blade. An interesting feature of this knife is that the deployment is fully adjustable, by adjusting the tension in a spring-bar which is accessible by removing the scales. This is facilitated by the included TORX wrench, which was a nice touch.

The same wrench can also be used to flip the pocket clip from side to side.

The scales are made of FRN (Fiberglass Reinforced Nylon) which is a more flexible yet durable alternative to the more common G10. The grip is textured with the 5.11 logo, as well as three circular finger tip dips.Crenelations on both the inside of the handle and back  of the blade allow further positive grip.

Equipped to enable both a blade up and blade down grip, the large reinforced retention ring typical of this type of blade, giving both pinkie or index finger grips. That ring allows both a retention, and lanyard attachment point as well as being a blunt impact tool.

The linear lock set into the back handle allows the return the S30V Crucible steel curved, scythe blade into its recess, and the clasp tension is directly related to the adjustable tensioner used for release of the blade. The short blade is not an issue given the particular style of use this kind of blade allows, and for the particular uses Omega uses it for.

The glare and corrosion eliminating Teflon finish of the blade only adds to its overall slick production. That evil claw of a blade makes up for lack of length with style and stealth.

As you can see, it works nicely as the backbone of an EDC tool-chain, with a WTF and Eat'n Tool on a baby carabiner on Omega's one.

Wednesday, April 16, 2014

Update: 5.11 Tactical - TDU Kilt re-release

The good folks over at Soldier Systems have reminded me (and now from me, to you) that 5.11 Tactical have re-released their Tactical Kilt.

I love mine, in fact, I'm wearing one right now. I brave both weather and the harassment of the ignorant (and actual Scots) to be comfortable and bad-ass. Pants are tyranny and I love freedom. Don't you?

Check them out at:
http://www.511tactical.com/kiltoff
http://www.511tactical.com/tactical-duty-kilt-134360.html
and hopefully on http://www.511tactical.com.au/ soon

Available with the following colors: Khaki (a greenish brown), Coyote (a tan brown), TDU Green, Tundra (a deep green), Charcoal, Dark Navy, Black, original MultiCam, and Realtree Xtra and in sizes 28-54.

If that wasn't cool enough, 5.11 are also donating $10 from every kilt sold to FBINAA and We Salute You Veterans.


Tuesday, November 19, 2013

Review: Fenix - TK-51 light

I had the good fortune to be introduced to Braent Hong,
Asia Pacific Sales Manager for Fenixlight Limited at the SSAA SHOT Expo by my friends at LEGear Australia and made an impression about my love of all things lighting.

He recommended I contact their marketing department, and sign up to be a beta-tester, and after many month of negotiations, I received this pre-release TK-51 model light. This is a BIG light, and it certainly performs.Here it is stacked against the HexBright crowd-funded light, I have covered previously.

Let me tell you about the TK-51 ....
At 18.8cm (7.4") long and having a grip diameter of 4.8 cm (1.9"), and weighing 430g without the batteries, this is quite a serious hand held light. At the buisness end, it features two  Cree XM-L 2 (U2) LED's, in a tear-drop configuration of reflectors.

The body of the light is made of machined aircraft alumiunium, Type III hard-anodized and features a toughened and anti-reflective coated glass facing. The two Cree LED's sit in differing reflectors, one large and deep, the other quite shallow. Both reflectors were mirror finished. The glass was in-set from a smooth lip.

The tail-cap was crenelated, and two of the opposing crenelations feature a strap hole for securing a lanyard. The tail cap unscrews to expose the battery holder, which is well labeled to ensure that not only the battery holder, but the batteries themselves are properly loaded, avoiding any misloads.

Speaking of batteries, it is designed to take three 3.7V Li-ion 18650 batteries, which for those who don't know are the big-brother of the CR-123A batteries becoming so prevalent in the resilient gear market. It will also take six of the CR123A's in place of the 18650's, and even the 3.2V 16340. In the absence of a full load, it will even operate with one or two batteries alone, but at much reduced performance.


the TK-51 has some interesting controls, with individual controls for the spot and flood LED's, which ramp up from Low, to Medium, Medium-high and High modes, each accessible by a tap of the appropriate control. It also features a memory, such that the on/off button will recall the previous settings for both LED's. Momentary Strobe can be produced at any time by holding either LED controller, and cycles between two distinct flash frequencies. Momentary "TURBO" mode is achieved by depressing the on/off button, and gives full power to both LED's. Which is a LOT.

Each LED has a Lumen output of 10, 150, 400 and 900. This effectively ramps up with a button press for each LED control, offering considerable control of light output for the user, given their need. with a Single LED runtime, running from 420h at Low for a single LED, to 1h 45min for both LED on high, there is also considerable operational variety. I found that the buttons were perhaps -too- easy to press, being raised from the surface, and had a very light pressure needed to activate.

Fenix state the beam distance is effective to 425m, with a peak beam intensity of 45200 cd. Put simply, it packs a whole lot of light, and can throw it a long way.

This shot is of the TK-51 with both LED's at high, in TURBO mode, putting out 1800 lumen, and lighting up my whole street. I angled the spot down, so as not to side-blind passing cars at the end of the road.

Low Flood
Low Spot
The low flood and spot were hard to catch on my iPhone 5s, but the reflective paint of my old car glinted well enough, remember, this is 10 lumen
Medium Flood
Medium Spot
The medium options, at 150 lumen match most over the counter service station and supermarket lights that I've had. My trusty "household blackout light", the 5.11 ATAC-A1 is only 103 lumen (but off a single AA) .
Medium High Flood
Medium High Spot
At Medium High, the TK-51 is putting out 400 lumen from each LED, doubling that of my CR123A powered Surefire 6pX.
High Flood
High Spot

At High, the LED's are outputting 900 lumen, which even outstrips my HexBright FLEX, and is just shy of my new car headlights. On top of that, the built in circuitry has both output lock-out, meaning that it will produce the same light output for as long as the charge allows, then drop to the next level, and so on, rather than dimming gradually. At the lowest power levels, the light will blink its LED's three times as a last-ditch indicator of power loss. There is also overheat protection, which down-shifts the output until the light cools. During my use if the light, the finely machined texture on the grip was good in the hand, and the light had surprisingly good balance. I hate to think what it would feel like wielded in anger.

Combined with the mass of the light, its 1m shock resistance, and IPX-8 (2m) water resistance, this is a serious light, for serious use. I bought rechargeable batteries for it, and a charger, which comes wit ha car-adapter, which I think will greatly expand the use I get from this light. Now to find a pouch for it!





Saturday, November 2, 2013

Review: 5.11 Tactical Kilts


I love it when I get my wish-lusts fulfilled,  but I am so glad when its not just me, but the hordes of fans who get theirs too ... From what was originally a "April's Fools" joke, back in 2011,  with a VERY limited run (less than 100, if accounts are to be believed), the uproar from fans led CEO of 5.11 Tactical, Mr Tom Davin to take the cries to heart, and a full production run was initiated.

These are the 5.11 Tacical TDU Kilts  in Tan, OD, Black and Multicam and managed to secure in a pre-order, from 5.11 Tactical Australia.

I've really enjoyed adding more kilts to my collection over the last few years, along with my collection of UtiliKilts and my formal tartan kilt, as well as others, they are an important part of my identity.

The question is just how apt are they for a survival situation? It all comes down to the "form and function" ratio.  I'll go into that in a bit, first, here's what makes up the 5.11 TDU kilt.

 Firstly, they are made to mirror the TDU pants as closely as possible, with pocket placement, (including the cargo pockets) for "consistency of training". I have several sets of 5.11 pants, the Stryke and the TacLite Pro pants and I can say that I like the consistency, even between different designs and cuts. 

The TDU kilt is made of the same 65% Polyester, 35% Teflon treated ripstop cotton as the TacLite Pro pants, with four snap-closures on each side of the front panel. Double and triple stitching throughout ensures rugged and reliable wear.

Brass D-loops for sporran attachment are awesome, and I have worn my CAOS Admin pouch as one, for full Tacti-cool Effect.

Always a welcome addition to a kilt, the front slant pockets featured reinforced edges to protect against knife, pen or light clip abrasion.

The front belt loop includes additional badge holder loops, the loops themselves are wide enough to accommodate up to a 1 3/4" belt. Ive had no trouble with any of my belts; but tend to go with either the made-to-match 5.11 TDU belts, my shiny PM Leather hobble belts, or the always dependable 215 Gear Ultimate Rigger belt.

The side cargo pockets are also press-snapped on, and removable, and swappable, with hook-and-loop closures. Inside each pocket, are either two or three internal pockets, to fit two 30 round AR magazines or three pistol magazines, the pockets can be switched from one side to the other to fit your need.  A gap has been left in the lid-flap to accommodate feeling items through, in this case, I have used my Benchmade SOCP CQB dagger-trainer to demonstrate .


An internal press-snap gives an additional modesty protector, as well and ensuing you get more cover for your activities. There has been a long military history of the kilt, formally ending during WW2, and the recent revival in "tactical-wear" is only a reflection of that, however, I have worn mine in some pretty arduous conditions, and can attest that they offer considerable freedom of movement, are not all that cold in inclement weather, and cooling in hot weather.

I have climbed, run, crawled and jumped in mine, as well as wearing them to work on a regular basis. Much like my collection of "cargo pants" these offer me a means to carry my EDC, some rugged daily-wear and have some individuality to boot. Thanks Mr Davin!

Monday, June 24, 2013

Review: 5.11 Tactical - Stryke pants



When I visited the SSAA SHOT Expo, I paid a visit to the 5-11 Tactical stand, and met with their Australian and American reps, including the very knowledgeable founding father, Bil, who took me through the pants they were kind enough to gift to me, the 5.11 Stryke Pants.

Here in the OD green, with one of the 5-11 TDU belts I am fond of as well, I strike a pose with the ultimate urban test ... does the cargo pocket fit my iPad? Yes, yes it does.



From the get go, let me tell you that the material used in the Styke pants is really, really comfortable.

The secret to this, as well as the purpose developed propriety blend of poly/cotton ripstop, is that it  incorporates mechanically stretchy yarns, meaning the stretch and recovery of the fabric is achieved without the use of spandex, but rather by the way the threads are woven. 

It is a lighweight, breathable, and even with the ripstop checkering, extremely comfortable to wear. Soft and yet no hint of flimsiness. Treated with a silicone based water and stain guard, they help up pretty well from my work, parenting and prepping splatter for their first week of wear.

The cut of the pants was very generous, especially important if like me, you "go Commando" and find that tighter cuts pinch at the most inopportune times. These were a lot more comfortable than the 511Tactical Taclite Pro pants I have reviewed in past, great improvements! Even the waist band is well designed, but I'll get to that in more detail soon. 
 
On to the all important pockets!

You can see the main hands pocket, with their reinforced hockey-stick design (Bill tells me that was a specific request from Firefighters, to have somewhere to clip their radios. AN accessory pocket on the top of the thigh, the ubiquitous side-of-thigh cargo pocket, and just peaking from the side, the rear seat pockets.

What can you fit in them all? here, let me show you ...



I like my gear, and i like having it on-hand. However, being able to FIND it can be a real pain, unless some thought goes into pocket design, which in this case, it really has.

Similar to the Platatac Urban Dax, the cargo pockets sport internal compartment which are wide and deep enough to fit my bulky Snow Lizard SLXtreme iphone case as well as a Lazerbrite with little trouble. I can only suggest that the compartments would fit a 5.56 NATO magazine.

The hook-and-loop patches give a nice closure to the pocket, without being too invasive, and the styling of the pocket itself, with two baffles for expansion, we still quite discrete, an important aspect when wanting to blend in whilst still loading up.

Lets have a closer look at the front pockets.


As well as the twin, deep accessory pockets on the fronts of the thighs (seen here with the large HexBright FLEX filling it) but beside this, the main pockets have some interesting aspects that it worth covering in more depth.  As well as being nicely deep, and lined, but the best features are the hockey-stick shaped low profile pockets. 

This near-horizontal edge is perfect for clipping pens, folding knives (like the CRKT K.I.S.S. seen here) or as Bill told me, the pocket radio's that the firefighters who commissioned the pant design in the first place asked for. 

The belt clip of the knife (or pen, or radio) sits on a reinforced patch of material, still in the pocket, out of the way but easily accessible. For items with longer clips, the people at 5.11 had the forethought to put an opening in the top of the cargo pocket, but you could also feed cables up through it I suspect.

Two other interesting (and very thoughtful) features can be seen here as well. On the left-side belt loop, an opening can be seen, which is the space the self-adjusting tunnel waistband feed into. Similar to that seen in the Taclite-Pro pants, this allows the pants to stretch when you bend at the hips, without biting, or sagging, once you are upright again.

The second, innovative addition, is on the right belt loop, which features a vertical loop in addition to the regular horizontal one. Perfect for clipping ID or a badge, and in my case, a spot to clip my multi-tool retention lanyard.




 Then there are the knees. 

As well as pretty standard double-cover knees, to help with wear and tear, and we all know what that is like, 5.11 have kept this in mind when putting in the seams for these. Low-profile and discreet as well as discrete, the addition of a second layer adds little bulk, but the real trick to these in on the inside!

On the inside edge of the knee seam a small pocket opens up to allow the insertion of a kneepad. I put my Blackhawk! kneepad up here to show you what it looks like. The pocket is certainly big enough, but takes some delicate handling to fit the bigger pads in.

All together these are some really excellent pants, I was thrilled to receive them, and their comfort was a really impressive collection of features. 
 

My only disappointment was the back pockets, being a standard hook-and-loop straight topped pocket, unlike the signature 5.11 slash and retention strapped back pockets of the TacLite Pro's.

 That said, there was even an extra unlisted feature that Bill pointed out to me (always great to have the people behind the product there to show them off) In the bottom hem, eyelets have been sewn in place in case the wearer wanted to blouse them! Little things that show they go the extra distance with design.

I also love the way 5.11 got their name ...

“5.11” is a rock climbing difficulty level as listed in the Yosemite Decimal System. With skill levels ranging from 5.0 (easy) to 5.10 (difficult), 5.11 is even more grueling. 5.11 is officially defined as, “After thorough inspection, you conclude this move is obviously impossible; however, occasionally someone actually accomplishes it.” 




Related Posts Plugin for WordPress, Blogger...