Review: HHA ASOT-01

I've finally gotten my hands on one of the much desired Hardcore Hardware Australia ASOT-01's for my very own, as part of my Giftmas haul, and I'm finally getting around to telling you about it, now that I have had it in my grabby-hands for a little while. I had covered this blade after it came out in a Wish-Lust piece, as well as getting to pay with one again at the SSAA SHOT show.
 
We have a few of the HHA items in the household, with a TWI-02 Tactical Writing Implement , and two of their smaller knives, the LFK-05 and LFK-02 blades.
Putting my three most similar blades together, you can see how the ASOT-01 compares to with the ZU Bladeworx Mekanik and the very deadly Benchmade SOCP CQB.
 
The distinct bevelled ring design of the ASOT-01 enhances the tool's accessibility and comfort, making it exceptionally fast and easy to draw. The ring is very comfortable, and the inwards scalloping wasn't at all troublesome as I had thought it might have been. The ring, much like that of the SOCP also enables transition to a rifle or hand-gun with no disconnection between the tool and firearm.
 
That scalloped thumb recess at the top of the ring supports a positive grip and for the application of downward force, opening cans of whoop-ass and the like.
 
Unique to the ASOT-01 is its "live edge identifier" knob at three quarters along the length of the handle. This enables the user to quickly identify the position of the single-sided cutting edge by feel. Good for in the dark, or when your blade is obscured. I really liked this feature, it made for a fast steady draw as well as keeping it firmly in the right orientation.
 
 

The personalised mounting provided with the ASOT is based on the ambidextrous kydex sheath it comes with along with Tek-Lok and Molle-Lok mounting options. Customised for vertical, horizontal or angled wear the mounting is further expanded by the provision of eyelet holes along both sides of the sheath to facilitate alternative attachment to the body or gear with paracord, cable ties or the like.
 
With its low profile design which allows the tool to be sandwiched on or behind magazine/accessory pouches, or horizontally along the belt line to maintain optimum concealment and retention. However, the sheath adds considerable width, which limits where you can place it somewhat, but not so much as to be impossible.
 
Made from 6mm (0.236") D2 tool steel stock, it can withstand some substantial impact without loss of sharpness. Halfway down the sharp edge, serrations have been cut into the blade to aid in the performance for more demanding cutting tasks.
 
 
The blade is 100 mm (3.93") long, with an overall length of 198 mm (7.79") and 27 mm (1.06") wide. When its its widest, it's 40 mm (1.57") wide. The blade with it's G10 handles weighs in at 120 g (0.26 lb) which is not bad for the size it is. The D2 steel is thick, and dense, but the very narrow throat and ringed end.
 
In its friction locked sheath, its 205 mm (8.07") long, and 60 mm (2.36") wide and weighs in at 160 g (0.35 lb). Again, the width makes it much more like a belt knife rather than the dagger effect of the SOCP.
 
The ASOT-01 is a non-prohibited design, single edged but ready to grind down on the back side of the blade, something the guys at Platatac have told me that Operational Operators Operating have been known to do. As always with this kind of knife, please check your local State laws in relation to knife ownership and carry.
 
[EDIT - 26/2/2016]
The good folks at Hardcore Hardware Australia dropped me a line with several words of caution, and I'm only too happy to agree with them -
 
"Josh, we do not advocate the re-grinding of our tools; such practices void HHA’s warranty. What you are suggesting in your review in this regard also constitutes a breach of Victoria State Law; I would be inclined to re-think this approach. Thank you in advance for your co-operation. HHA"
 
I'd rather touch-up a paining in a gallery with a crayon than re-grind one of their blades myself, it's nerve-wracking enough to sharpen them right.
 

Review: Hardcore Hardware Australia - LFK-05

It was my birthday recently, and I was lucky enough to receive (from my mother, no less) this very nice piece from Hardcore Hardware Australia. This is a first because as far as I can recall, this is the first weapon gift I've received from her in all my 39 years. I guess she thinks I'm mature enough for cutting implements now...

I gifted Omega a HHA LFK01 knife for her birthday a couple of years ago, and it has featured as an accessory for numerous outings and adventures, be it wilderness or as a playtool for clubs that would give Mr Grey reason to pause. However, it took some time for me to get a HHA blade to call my very own, so I'm very leased to show off this, the newly released LFK-05.

I did a Sneak Peek piece on the new series, and their badder brother, the ASOT-01.

The LFK Series tools are designed primarily as overt carry, easy to reach back-up knives. These aren't thigh-sized jungle-slashers, these are close in and personal tools for when you need something small, shard and hardy.

Made from the same 6mm (0.23") D2 tool steel, as the original LFK-01,  with full tang construction  and a robust Teflon coating the blade isn't wrapped with paracord as previous HHA blades but is instead
nonslip, ergonomically carved , G10 handle scales offering a positive and comfortable grip, and are secured with Torx screw.

The neck of the blade features a grove for your leading (or little finger, if you are reverse gripping) and the spine features a broad sweep of jimping for secure thumb pressure. The spear point design offers exceptional strength, yet allows optimal maneuverability and edge-on geometry.

You can see the pronounced glass-breaker point at the rear end, which also features a lanyard hole as well as full beveling to remove any sharp corners.  Weighing in at 171g (0.37lb), this little knife only measures 172mm (6.77") in overall length, 70mm (2.75") of which is blade. The whole piece is only 45mm (1.77") at its widest.

Due to its size and weight, the LFK is an ideal choice where space on an assault platform may be limited, on a belt where bigger blades might be "too much knife". These heavy-duty blades also bridge the gap where full-sized, fixed blade knives may be unmanageable, and a folder a poor compromise. I prefer fixed blades to folders in most situations, and having a small fixed blade is something I find desirable.
I put up the LFK-05 against the LFK-01 here, as well as the comparably small but chunky MSM001 KA-BAR knife.

The blade is treated to a rather stiff
58 – 60 HRC which, thanks to the tool-tough D2 steel should put this in good stead for any task you care to throw at it.
 
The LFK-05 is friction locked in a smartly moulded Kydex ambidextrous sheath. A set of eyelets around the edge of the sheath allows it to be fitted with a Tek-Lok™ mounting system for belt carry, which can be customised in vertical or horizontal positions. 

Those eyelet holes along both sides of the sheath facilitates alternative attachment to the body or gear via paracord or cable ties, although I've found the friction lock too secure to work as a neck-knife, without wanting to give myself whip-lash. 
One thing I've found is that the fat-body G10 scale handle is not quite right for my bare hand, the gaps for finger grips and the finger grip at the neck don't quite mesh, just due tot the size of my hand. When gloved this is less noticeable, but something to note.  I didn't have this issue with the cord-wrapped LFK-01, however, it is not a big enough problem for me not to love it. 

This is a rugged knife, nicely sized for belt wear, and fitting to any number of spaces on a harness, pack or where-ever you might find yourself in the need of a solid blade in a little package.

Review: Boker+ Tomahook

I have had the good fortune to lay my hands on a couple of Boker blades in the past, most notably, the American Kami - Boker MidTech Colubris the an example of the transition to production model from the artisan models such as the of the American Kami Super Colubris.  I like their work.

I was very fortunate to have been gifted this very pretty piece for my most recent birthday by one of my partners from Survival Supplies Australia. This is the Boker+ Tomahook and it sings to me.


Bearded axes are a piece of my heritage, and I'm always keen to a good solid one to add to my collection. The M48 Walking axe and it's little brother the M48 Ranger Hawk are two good examples, but as dedicated readers will note, I've had troubles with the design.

The Tomahook features a full length G10 handle bolted through with five hex screw, recessed bolts. The handle is inset from the edge, and rounded to leave a working steel edge running around the entire tool. For all your hammering needs.

With its broad wide blade I have spent some time chopping firewood and trimming our out of control acacia tree it is an highly effective as a hatchet. When prying apart packing pallets, I found that it can also be used as a lever, with its top edge being  sharpened like a chisel, for wedging in, and doing stripping cuts.

The back end of the axe
is a rather pointy tip works as a glassbreaker or pounding tool for times where you want to pound a hole, crack a rock or melon, but perhaps not leave a 14.3cm (5 5/8") axe-wound.
The 816g (28.8oz) axe is sprightly in the hand, both choked up behind the beard, or holding on to the tail end, single-handed, and is magic and menacing two-handed.

The SK5 steel is 4.5mm thick, and hardened to 57-60 HRC at the head, so I shudder to think of the problem this axe won't help to overcome.

It comes with a specially designed Kydex sheath with four eyelets for running lacing and attachment devices. It also features a friction catch, which holds the axe in very snugly, but also allows for a swift yanks and draw action.

I really liked receiving this, and liked waving it about and chopping my way through a variety of items. I can see this featuring heavily in my camping, wilderness adventuring and molon labe moments.

This is an exceptional piece, and well worth looking at if you're in the market for a solid tomahawk.

Review: Boker-American Kami MidTech Colubris

I was very fortunate to be able to take part in the Boker-American Kami pass-around program, after responding to a call by D.J. Urbanovsky. This was for the production level Colubris MidTech, the smaller sibling of the American Kami Super Colubris, which I reviewed recently. D.J. teamed up with German knife-making company Boker to "upscale" his bespoke knives, and they came up with this as their cooperative piece.

Here you can see it above the Super Colubris, on my Hazard4 Launch Pad iPad sleeve

The Boker - American Kami MidTech features the same G10 scales, with the American Kami logo formed into the scales to act as a very functional gripping surface, along with the hollow bolts that were also a feature of the Super Colubris. As is the protruding butt-end of the full tang construction. Nothing like an impact tool to make your displeasure known.

My pass-around was individually numbered 0074, and arrived in a lovely display case from Boker, along with a note for the fellow who had the blade before me, apologizing for the broken belt clip and furniture. The loss of that clip was moderated by some lovely stickers they had included. I got straight into testing.

Without the belt loop, I rigged a cord lashing system, inspired by D.J's own YouTube safety and carry clips. I wanted an "outside the pants" carry, to have on hand as a utility knife as I worked around the house.

The blade itself is tremendous. Rather than the CPM S35VN
steel of the American Kami version, the Boker is from 440C, a very serviceable steel.  The difference between the MidTech and the Souper is almost entirely in the blade section, with the MidTech having a 10.8cm (4 1/4") edge, with the same modified Wharncliffe geometry, just shortened. It has an overall length of 22.5cm (8 7/8") and weighs in at 225g (8 oz). Two inches less blade than the Super Colubris, but still a capable and impressive tool.



I had a great time testing this blade, I ran it though all my usual knife tasks; I did kitchen things, I cut cords and rope, opened boxes, I even wrapped my families Giftmas presents with it. The stonewashed finish gave the blade a nice sheen, and stacked up nicely against the finish of the Super Colubris nicely. It cuts well, and the width of the blade was still suitable for medium delicacy tasks.



I also took the knife out into my back yard to give it a workout in a more stressful setting, namely hacking back the noxious vines that were invading my kids trampoline. You can see here the effect it had on those vines, with both slashing cuts, and pulling cuts being effective. I was able to maintain a very good positive grip on the blade, and it went right where I wanted, every time.

I also took it out hiking with my family, when we visited a scenic National Park, to give it a carry-test. Now, before anyone gets all concerned, no, there isn't anything to be afraid of in our National Parks here (not if you've liberally applied Vegemite to your heads, to ward off Drop Bears. I just wanted to go hiking and see how it felt. I fitted it to my Hill People Gear Runners bag and off we went. It wore like a treat. It's length molded nicely to my chest, and the weight was insignificant. I carried both Tactical Baby and Triceratops Girl up and over boulders and across creeks with it on me, and never a pinch or poke.

This is a really nice, very affordable addition to anyone fixed-blade collection. Super functional, sharp and rugged, with great geometry, hand-fitting and with a variety of carry-options.