Review: Go! Outfitters - Landing Pad

A well made tarp is a crucial bit of kit that every outdoors expedition could benefit from, be it rain or wind shelter, shade or just a dry and prickle free place o picnic upon. Though at times a 9  x 12 tarp may be a bit too much, especially if you're just planning for a bit of a trail hike. Then there is your gear, be it packs, cook gear, bedding or even boots at the end of a long day. If like me you prefer a slung hammock to a ground tent there is the question of what to do with your gear, if whatever fly system you have doesn't cover it. The clever people at GO! Outfitters came up with something to fit that niche, the Landing Pad.   

It’s made from durable 70D polyester, with a 1000mm waterproof polyurethane coating on the bottom and a silicone coating on the top for extra protection and easy clean up. This makes the Landing Pad extremely waterproof. 

 The Landing Pad is 137cm (54") in diameter and has eight stake loops and four sets of drawstrings with cord locks around its outer edge. It comes with a set of steel hook-style tent stakes in a draw string bag to stake it down as needed. At 137cm in diameter, the circle is big enough that 4 people could sit on it back to back or three facing inwards, if legs can be managed. Certainly big enough for a trail-side picnic or to drop bags and boots on whilst hopping into your hammock. Stake it down under your hammock for a soft place to step onto once you swing your legs over but before you put your boots on. 

The four drawstrings around the edge of the Landing Pad allow for the lips to be drawn up into a low bathtub to keep damp ground run-off out. It also allows for the whole circle be drawn up like a purse to wrap your gear in a highly water proof bag. Obviously the opening isn't covered, so don't be throwing it in a pool or leaving it under a waterfall. By pulling two opposing drawstrings the landing Pad converts into a gear hammock,  stretching 2.4m (7'10") overall with a 1m (3') hammock space. Though it can be drawn tighter doing so reduces the capacity. I would use it as an along-side sling, rather than bunk-style to keep things in reaching distance and act as a buffer.

 This drawstring rim also enables the Landing Pad to be fitted over a backpack to shelter it from the weather and could supplement a poncho to keep both you AND your gear dry.  I found it big enough to be able to wear it like a turtle-back poncho, covering my back, butt arms and back. Its even big enough that I could shelter under it like an umbrella when couched, staying totally covered. 

I found that the tan/brown material made for quite the unobtrusive "hide" when crouched down under it when just off-trail. It occurs to me that with an expanded hiking stick or appropriately padded branch you could make a small single pole shelter with the Landing  Pad, properly staked out.The Landing Pad, with stakes and stuff-sack weighs 285g (10oz) and by itself 15g (5.3oz) and packs down to a pocket sized 4cm X 13cm X 18cm (1.5" X 5" X 7").

More than compact enough to stuff in a pocket or day-pack when going for a hike to provide a clean dry spot to break on. I have two  ( one brown one charcoal grey) and they make for an easy addition to any adventure without adding excessive gear load.

Review : Aerial A1 suspended tent

Its no secret that I'm a fan of hammocks and if I had my way I'd never sleep on the ground, but the inevitable sag can lead to a banana shaped sleep which some can't abide.
 Options like the fabulous and fun Tensile tents provide a flat space but need three anchor points, and more traditional hammock systems like the Sierra Madre Nube are comfortable but don't resolve the sag issue. A very exciting and innovative option is the Aerial A1 by Opeongo which I backed on Kickstarter. After the usual development and manufacturing delays, I was delighted by the end product. 

The principle of  the A1 is to form a semi-rigid cot, by stretching the four corners taut via a pair of webbing loops that are strung around appropriate supports, tree trunks or beams. This forms the base ontop of which the tent component is built. Each short end is held rigid with the inclusion of a spreader bar.
A single 7000 series aluminium pole with spreader-bar held in place with clever clasps suspend the internal mesh body and give it near vertical side-walls. The base features a bath-tub bottom and is made of 210 Denier, ripstop nylon (PU 4000) and the mesh walls features full size zippered openings on both sides.

The main feature that allows the A1 to achieve its exceptional comfort and stability is the unique, slackline inspired, suspension system. By wrapping high tensile webbing straps around a tree and pulling them back from both sides of the trunk the A1 is able to achieve a four point connection system. Using this four point system, along with tension and two spreader bars at the head and feet of the base it is able to create a sturdy, flat platform that feels similar to a high quality cot. The webbing suspension (PES (Polyester) rated to  14kN /1450 kg (3200Lbs)) also provides spring like a mattress that helps absorb movement without being tippy or bouncy. 

This flat sleeping surface provides the ability to sleep in any position, back, side or even on your front.The secret to the suspension tension is the buckle system. The AustriAlpine are rated to  15kn / 1528kg (3370lbs) and are made from ultra lightweight alloy. The system works by having a simple self-locking dual-buckle at one end's corners. This lets you set up one of the webbing straps  (6m (19'8") or 8m (26'3")) straps at one end, as a static length. The dynamic end features a pair of off-set buckles. 

This enables you to take advantage of the RollerCam fitting to tension the whole system up. To do so simply feed the webbing through the first off-set buckle on the A1 and then back to the Rollercam returning back to the second off-set buckle on the A1. This simple system 3:1 purchase creates a 4:1 mechanical advantage which is more than sufficient to create a nice taut, flat surface. Each of the webbing straps has a boldly embroidered + mark in its center to assist on centering the straps which was a nice touch. 
The removable fly is lightweight, durable, made from a  premium 40 Denier nylon and has a 1500mm hydrostatic head waterproof rating. 

The fly is completely separated from the internal mesh body by the spreader bar and main ridgepole, which  prevents condensation build up, promotes good airflow and prevents contact weeping.  The base has  a footprint of 203cm x 69cm / (80” x 27”), which is plenty big enough for me to stretch out on, even when Tactical Baby joins me. It is also no coincidence that the footprint matches a large Therm-a-Rest® mattress, which would be great insulation, let alone padding, but I found the cot-like finish very comfortable on its own. The fly open on either side or can be stretched open to form 17” vestibules. guy-lines and Y-shaped stakes are included to stake out the vestibule. The clever design of the A1 also allows for it to be used as an on-ground tent, with four Shepherd Hook stakes to stake out each corner. Its peak height is 90cm (35”), which is plenty high enough to sit up in.
Inside the tent there are three well placed pockets to hold all your needfuls. Two medium size pockets on either end and one 'sky" pocket in the ceiling that is the perfect place for putting your head lamp to light up the tent at night, or an iPad to watch a movie. None of these pockets are heavy duty, and the outside attachment points work better for hanging a bottle, or your boots but for glasses, a flashlight or devices, they work perfectly. 

The system as a whole, packed down measures  67cm x 13cm (28” x 5”) in its slingable stuff case and weighs 2.70kg (5lbs 15oz) for the full system, or cut down to 2.45kg / (5lbs 6oz) for a slung trail set, or 1.86kg (4lbs 1oz) for a ground-based set up. Leaving out the stakes, straps and roller-cams cuts weight, crucial when ounces mean pounds. 
 This shelter is very easy to set up and only takes about 6 minutes. (once you get the suspension buckles sorted out. )The A1 makers state it will be stable on trees with a diameter as small as 5”, though they recommend using healthy trees with a 7” - 25” trunk. I set it up on painted 5"x5" beams with no trouble. The standard webbing provided allows the tent to be set up between two trees spaced 10’ - 25’ feet apart. For trees spaced 10’ - 16’ apart the webbing will completely encircle the tree for maximum hold. I recommend using the long webbing lengths at the Roller-cam side, for maximum cinching length. 

The A1 has a suspended capacity of 200kg (440lbs) so you probably wouldn't store your gear in there with you, but OpeonGo offer an under-slung gear hammock to keep up to 27kg (60lbs) of things off the ground, yet easy to reach (it doubles as a vestibule ground mat in the un-suspended set-up). They also recommend not setting the A1 up any higher than waist high, for ease of entry and safety. A good rule of thumb is never to sling a hammock higher than you're willing to fall. The 5" high tub walls of the base provide a good support in the event of leaning or rollovers in the night. I've found it to be very stable, even in high winds and with the fly staked/ pegged down, very rain resistant. 

The Aerial A1 can also  be pared with the A1 Underquilt to provide maximum warmth for winter camping.

This is a great system, light, comfortable and versatile. I'd highly recommend them to anyone looking for an off-ground option. Outstanding design and top notch engineering.

 

Review: Alton Goods bathtub groundsheet

 Sometimes its the little things that can turn a good experience into a great one, or an bearable one into a bearable one. Like turning cold and wet into warm and dry. One such item is the Alton Goods bathtub groundsheet. I'm normally a fan of hammock sleeping to keep me off the ground, but its not always an option or practical. Having a lightweight, waterproof groundsheet can offer you the protection from wet ground, mud and sticks, to provide a comfortable and pleasant platform to set up on. Or a dry spot to have a stretch-out on damp grass. 

I received my groundsheet as a birthday present, in winter, and took it on a number of walks, where its small packed size of  21.5x8x11cm (8.5"x 3.25"x 4") and light weight 295g (10.4 oz) made it an inconsequential daypack or cargo pocket addition.

Made from a tough Ripstop nylon construction, dual-coated with 3000mm Silicone and PU, it is fully seam-sealed with heat tape to be both 100% waterproof and puncture resistant. When staked out the Bathtub Groundsheet measures : 210x90x15cm (6'11"x2'11" x 6"), plenty big enough to fit me, and my gear, and the bathtub wall height is plenty big enough to keep my bedding in, or incidental wet out. 

The corners are heavily reinforced and tailored to stand upright without stressing the seams and feature tape reinforcement to hold upright without sagging. This is bolstered further by built-in metal posts in the corners to hold it up, as well as sewn in buttressing peg-out loops extending outwards. the top edge of the corners also feature a loop sewn in to fit fly poles if used, and sewn in snap-points allow the groundsheet to marry up with the compatible Ultralight Ground Bug Net to create a fully-enclosed sleep system by pairing with this groundsheet. Nice forethought. 

The included 4 Y cross-sectioned 7001 aluminium pegs have retention notches and a built in pull-cord for ease of removal.

When fully staked out and pulled taught, the bathtub effect is very stable, and provides a good barrier against the outside. the ripstop nylon is smooth and whilst not breathable, very comfortable to lay on directly, even after being in full sun. 

I liked that it was big enough for me to fully stretch out on, as i'm quite tall. i'd want a tarp strung up over it to sleep on, just to give some cover, and I suspect leaving the most down-hill corner flat to allow any water a drain-off spot might be prudent without one. 

I've woken up in a pool of water once whilst camping and don't recommend it. 

The whole system comes with own drawstring bag for ease of carry and is small and light enough to be stuffed in a cargo pocket. I have been keeping it in my car along with some light picnic hiking gear and have used it as a picnic blanket a number of times. I think i'll be picking up the bug net and one of the Alton goods tarps to complete the set, and will test it out for sure.