Showing posts with label WTF. Show all posts
Showing posts with label WTF. Show all posts

Thursday, January 22, 2015

Review: TacticalKeychain - TiMaG Paracord system


Not only do I love titanium, and magnets, but also paracord, so when Brad Martin of Tactical Keychains put up a KickStarter project that combined all three, I jumped onboard. I have been collecting the Tactical Keychain range for a while now, with the classic WTF tool (and its variants) as well as the larger cousin, the Large WTF but also the very functional TiKeY key-keeper set, the very crafty TiPiK lockpicks and most recently the also magnet equipped TKMB pen.

The TiMaG project however has been one I haven't reported on for some time, even though I've had these little magnets on my person for quite some time (as astute readers may have noticed, as they sit on my pocket-keychain tool ring).

Billed as magnetic push-pins, and even as "the most overbuilt magnets in existence", these little milled Grade 5 titanium plugs, each with a 2.5kg (5.5lbs) draw neodymium-iron-boron magnet built into the plug. Three channels cut into the sides of the plugs allow you to grip, or or even fit them with o-rings (7/32" ID x 11/32"OD x 1/16"C) for even better grip.

As push pins, they work fantastically, fridge-doors, white-boards, car body. Metal surfaces are just the ticket.

 The standard TiMaGz have the magnet's polarity set in one direction so they repel each other, for ease of manufacture but the Paracord system TiMaG's are created with 50% N 50% S polarity, so they will stick together. (just like the unfortunately fictional MagHook) .

Where the TiMaG's come in handy in a survival situation might seem a little obscure, but with some lateral thinking, a myriad of options arise: Dead drops of keys, papers and the like, either held by the magnet, or attached through the drilled paracord channel.

 I have one threaded through the steel cable of my bundle of pocket keychain tools, meaning I can stick them to a surface and access them, or have my Jil Lite Constel lantern light up my space. I've used the paracord loop to allow me to dowse for dropped items, screws, bolts, knives, needles. 

All manner of ferromagnetic needfuls of a certain weight can be "harvested". The key thing is your imagination, and the contact area you can manage with the TiMaG. Even though the magnets are rated at 2.5kg, I found that the sides and even top of a 450g can of spaghetti needed some finesse to retain a positive lock.



For simple packages, like papers, a spare key, or even say a Oscar Delta - Deep Carry Tube these are an excellent system for anyone. More advanced uses, well, you take your chances, but they are a damn well made set of mini-tools, and I love the aesthetics.

Be sure to check out Mike's NEW Kickstarter, the all new, updated WTF2.0 and TiStiK combo, I'm already a backer, and looking forwards to seeing what they're like to use.

Wednesday, April 9, 2014

Home Front: Bug Out Jar

I've been looking at putting together Bug Out Kits, to offer online, and possibly put up on Kickstarter, to get out to a wider market.

I've been thinking about what to include in such a kit, and what to put it in. My thought was to have something that could rattle around in the boot of a car, in the corner of a ruck or by the front door at home. It needed to be small and unobtrusive, rugged, easily identified but not standing out as a prize.

I happened to have a stash of bio-bottle containers, not unlike the Patho-Pack containers (or as we call them at home, "Dead People Jars"). The Bio-Bottles are biohazard rated, air and water tight shipping containers, 850 ml capacity, with a "size in carton" of 12cm x 12cm x 17cm, which meets UN3373 regulations, meeting 95kPa pressure testing. Good solid containers!

The contents of the kit I have been pondering, based in part on my own EDC and adventuring kits in past, and my experiences camping, LARPing and travel around the world. I have also been working on a tight budget, so have kept the items pretty generic where possible.

I've included in this beta version:
A wire saw
A space blanket
A fire starter (which includes a button compass)
A 100' length of paracord
A knife (which includes a rescue hook/strap cutter)
A steel paracord shackle
A WTF multitool
A multifunction spork
A 850mL Bio-Bottle

I may include some other contents as options, including a couple other excellent items, as well as carry-pouches, and even upgraded, expanded kits.
Hopefully, there will be some interest in these, and I'd love your feedback as to contents, carry and packing thoughts and I can make this happen.

[EDIT] Check out the jars, now in my online store, for sale!

Thursday, February 13, 2014

Review: Tactical Keychains - Large WTF

Here's another one of Brad from Tactical KeyChain's ingenious mind creator of the TiPiK and TiKeY, which came as an optional extra from his WTF Kickstarter project.

The is the "Large WTF", cut from the same titanium (Ti-6Al-4V) alloy as the regular titanium WTF's, but is significantly beefier in all respects. at 4.5mm (3/16th") thick, and 110mm x 33mm (4 1/4" x 1 5/15") in length and width. Featuring the same 1cm and 1/4" marking dimples done the long edges, this tool also features in its jaws; Imperial 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" & 5/8" and Metric: 6mm, 8mm, 10mm, 11mm, 13mm, 15mm & 17mm wrench heads.


It also features a recessed neodymium magnet that sits flush with the face, allowing the tool to be stuck to a toolbox, to hold the bolt you just undid, or the like. I've used mine both to store the tool, and to catch parts.

This has been especially good when working in messy, cluttered spaces, I just attached the tool to a pipe, girder or the like, and kept working.

As with the Mini WTF tool, the titanium has a bit of "flex" which gives some leeway with nuts and bolt, the thickness of the tool keeps it from flexing TOO much, though. 

There is also a built in 1/4" bit holder, which is an invaluable addition, as it gives you significant torque advantage, when working on stubborn jobs. Make sure you use good quality tools, and the rest will follow.

The two spacer holes in the tool reduce the weight and add lashing points, should dummy-cording or spooling of paracord be desired.

Brad suggests that you could carry 7.5m (25') of paracord wrapped around the central mouths of the tool.


I had my Large WTF lightly anodized, which gave it a "olive drab" finish that worked nicely with my collection of khaki gear, and found that it fitted pretty well into PALS/MOLLE channels, spanning two channels, and three rows for a secure fit.

All in all this is a robust and useful tool, and well suited to a lot of tasks where lugging an entire socket wrench set might be impractical. Getting in to reach close-fitted nuts could prove tricky, but hey, more titanium for my collection, and distributed tools for my EDC and bug-out-bags.

Thursday, January 16, 2014

Home Front: help Brad out! WTFs, TiKeY, TiPik sets!

You may remember the TiKeY that I recently covered (the article was picked up by Recoil Magazine, awesome, thanks guys) and the titanium WTF tool I covered a while back.

After being inundated with hits, and requests for product, it sounds like his lathe has up and died.
For those who don't know, as well as the WTF, TiKey sets and the TiPiK's (review to come this week, I hope), Brad is also the creator of the Bottle Grenade and has his fully funded TiPen project in the midst of production.

Brad needs your help need help! His lathe is going to cost 4-6k to fix, so he is doing a massdrop.

MassDrop link for the mini-TiKeY & TiPiK sets
https://www.massdrop.com/buy/tikey-tipik

also one for the WTF's
https://www.massdrop.com/buy/wrench-that-fits

Tuesday, December 17, 2013

Review: Tactical Keychain - TiKeY key holder

In order to try to maintain some discipline with my EDC keychain, I was pleased to back the third Kickstarter project by Brad of Tactical Keychains. What he offered was a fully customisable key-keeper, specifically designed to fit hit fabulous WTF tool. I've had awesome dealings with Brad, not only getting some pre-release items, but also the down-low on the Ti maker community.

Not only does Brad make cool things, but he also offers a great deal of "artistic control" to his backers, with a variety of anodisation options for all his builds, and updates from his machine shop.
The idea behind the TiKeY is that it gives you a milled billet G5 titanium, Quick-Flip means of storing your keys, avoiding the jing-jangle, or "I landed on my keys" thigh injuries. I have always seemed to have a janitors keychain worth of keys, not to mention my ever increasing keychain-tool collection

I opted for the deluxe version, with both the countersunk "pockets" for grip and dropping the weight, and countersunk bolt-holes, to let me jam a little bit more in, along with longer screws for the same reason. I also opted in for several additional elements, the TiFoRk, with its three-tined pointy Ti utility, for those times when the last mussel in the tin is eluding me in the bunker, I have been really impressed with its simple efficacy. I also opted in for the lanyard loop, the simple guitar pic shaped loop, giving me a means of attaching my TiKeY to my larger set (yes, I am aware of the irony here).


I also have a prototype "BottlePik", can/bottle opener which Brad was kind enough to send my way. This ergonomic little Ti blade features a chisel ground two-edged cutting surface, as well as a 1/4" hex driver and a lanyard loop at the tail end, as well as the 1/4" measuring notches that both the WTF and the sides of the TiKeY feature.

Lastly, I have the prototype TiPiK on mine, separate to the full set I have (review to follow).

Here is a shot of the BottlePik in use, which shows off how the TiKeY fits in the hand. At 3.5" x 1" the key holder fits in the palm very nicely, and the 1/4" ruler notches, along with the recessed pockets gives it a very controllable grip.

With the two different sizes of screws available, the TiKeY can accommodate 4-10 keys (4-8, 6-10), with the countersunk wells giving even more room. the corrosion resistant spring washers give you a snug fit to the contents, without being stiff, or grinding. The included plastic tubing can be cut into gap-filling lengths (ive used two different lengths to ensure my TiKeY is spaced the way I like

You might ask "why is how you keep your keys of any importance in a disaster situation, how is it relevant?"

No jingles, for one thing, this greatly reduces the jingle-bell chime of my keys. It also allows you to have a mini-tool kit on hand, safe and secreted. Much like a pocket knife, the items you can put into a TiKeY are only limited by a loop-hole, and your
 imagination!


Hot Brad up if you want one, via
http://dro.ps/tikey-tipik
or
http://tacticalkeychains.com/?page_id=167


FOLLOW UP:
http://apocalypseequipped.blogspot.com.au/2014/01/home-front-help-brad-out-wtfs-tikey.html

Tuesday, September 10, 2013

Update: WTF mini wrench and pry bar

A little while ago I reported on my pre-release WTF Ti mini-pry bar that I managed to sweet talk Brad of TacticalKeyChains into sending me, as it was a second. Just recently my full order from the Kickstarter campaign arrived, and thought I should show off the pre-production version against the production models.

 I ordered both titanium and the chromium/molybdenum  chromoly 4130 steel "stealth" version which has been Parkerized for shine and corrosion resistance. The main physical difference between the Ti and chromoly is the machining, in that the face of the pry-edge of the Ti versions is textured from the machining, where as the chromoly  version is smooth finished, due to the requirements for working the different metals. I like them both, and have had no discernible difference in performance when prying, they both bite nicely.

I had the production WTF anodized to a rose-gold colour, as it was going to be a gift for Omega (which she put straight onto her key chain, along with her NuKo Tool TiGBi Skully ). The only real difference between the the production version of the Ti WTF, and my "seconds" version is the lanyard hole is not quite centered in the second. In theory this might weaken that end, but I can't imagine putting enough force on the lanyard hole to make that an issue.

The Ti WTF's (made of Ti-6Al-4V) weigh 7.8g and the Stealth WTF (made of AISI 4130) weighs more at 11.5 grams, which is a small price to pay considering the benefits.

Brad has kindly provided some metallurgical stats on the materials he uses for the WTF's. The Ti-6Al-4V - has an Ultimate Tensile Strength of 138,000 psi and an elasticity modulus of 16,500 ksi, which means it is very very resilient, and springy. It will flex under stress.
TheChromoly 4130 has a Ultimate Tensile Strength - 97,200 psi but has an elasticity modulus of 29,700 ksi meaning it is not quite as resilient but VERY stiff.
Compare that against the aluminium 6061-T6 used for the basic WTF's which has an Ultimate Tensile Strength of only 45,000 psi and an elasticity modulus of 10,000 ksi  which is to say, relatively soft.

The cromoly WTF has the advantage of being ferromagnetic, and the wrench bits will not "give" when working stubborn nuts.  I really like my WTF's, i wear the golden "second" around my neck as a part of my EDC, and the chromoly version has found a place in my ZuluNylonGear CAOS admin pouch. These are brilliant little tools, and I'm glad I made the investment. 





Wednesday, May 22, 2013

Review: WTF - Ti wrench and pry tool

More Kickstarter goodness.

I managed to snag a "second" as an early trial piece for the WTF mini titanium keychain Kickstarter, from Brad, creator of the Bottle Grenade "the-last-opener-you-will-ever-need"

I am always on the lookout for little tools liek this, because I really like having them on hand, in my pack, in my EDC, without being totally overburdened (don't laugh).

This one was a "second" as it was slightly mis-aligned, you can see that the internal cutouts are not quite centered, leading to a slight reduction in strength, so when they were offered for immediate discount sale, i snapped one up.

The Kickstarter project offered these in three materials and I pull directly from the Kickstarter brief for these:

Aluminum 6061-T6 - Ultimate Tensile Strength is 45,000 psi and an elasticity modulus of 10,000 ksi (Soft) ~4.4 grams


Titanium Ti-6Al-4V - Ultimate Tensile Strength is 138,000 psi and an elasticity modulus of 16,500 ksi (Springy) ~7.8 grams

and finally a Parkerized Chromoly 4130 - Ultimate Tensile Strength - 97,200 psi but has an elasticity modulus of 29,700 ksi (Stiff) ~11.5 grams (and a Rockwell hardness of B 90–96 holy crap!!)

I opted for a Ti and a Chromoly, but they aren't expected till November (6 months away, I might DIE) so was thrilled to get this little guy in my hands.

Brad even zipped it though his anodizing mix, and I got to select my colour, this is the 55VDC anodizing and it gave a lovely pale gold colour to the tool.

So, what does it do?

The dimples on the sides correspond to 1/4"  on one side, and 1cm on the other.

The middle cutout features the following sockets:
Standard: 1/4", 5/16", 3/8", 7/16", 1/2"
Metric: 6mm, 8mm, 10mm, 11mm, 13mm


I actually struggled a little while to find some bolts to test this on. Then I realised that half of my house is covered in Ikea GORM shelves   and I set to tightening those suckers up. The teeth of the wrench slipped neatly into place, and away I went. This is indeed a Wrench That Fits.

The next aspect to test was pretty easy to do. The texturesd bevel of the pry-bar end made quick work of jars, cans and a variety of "things to pry" that I might have at one time or other thought to use a screw-driver, butter knife on, but NEVER the end of my multi-tool knife blade (oh no, that was snapped off by rabid goblins).

The "outside edges" are all smoothed off, giving a very comfortable grip, all the way down to the pry-bar end, which is not rounded, but smooth. Certainly enough grip to be used as an impromptu kubaton, if the need arose.

The internal edges are crisp, but not rough, and given that this is a titanium tool, I expect they will probably pretty much stay that way. 

Along with my SAR GlobalTool Dead Ringer comb, and my Snowpeak Spork this is the third titanium tool that I have added to my EDC, and I am really pleased with it so far.

Comparing it with my CountyComm Micro Widgy pry bar, it is a little shorter, and given its complement of ten socket options as well as a pry end, is significantly more multifunctional.

That said, I'm not throwing out my Micro Widgy either. Two is One, One is none.

So as not to keep all my eggs in one basket, (and really, two pry bars on one set of keychain tools is a bit excessive, even for me) I have taken to wearing the WTF on my necklace, with a simple split ring through the lanyard hole, where it sits beside my SAR Global Tool MoonGlow and my 500-700BCE pre-Han dynasty Chinese bronze arrowhead that I got whilst visiting my parents in Beijing. The irony of 2500 years between these two pieces is only magnified by the delightful chiming they make as I wear them, especially when being vigorous, or adventuring.
Related Posts Plugin for WordPress, Blogger...