Review: MS Clean kit

This is one of those items that I really picked up for the show-factor alone, rather than for any real practical need. I saw it come up on my Kickstarter feed, as well as on Soldier Systems, where I find a number of cool pieces of tech and tools. So, first up, my admissions: I don't own any fire-arms, but I do a variety of costume and Live-action roleplay events, which is where my "for show only" interest lies.

This is the MS Clean kit.

Whilst I don't own or operate any myself, I appreciate the need to maintain and clean both firearms, and all the tools of the trade, so to speak. I also have a LOT of pouches, and have on occasion had small needfuls drop out and get lost as a result of being adventurous with them in a pouch designed to hold magazines.

I've regularly used my Platatac FUP and other mag pouches to carry my gear, and I saw the utility of a case that married with my existing pouches. The guys from MS Clean offer the cleaning kit to fill the gap they felt existed with the current issued cleaning kits in the US military, and wanted to take advantage of the prevalence of magazine pouches.

The case is curved like a 30 round STANAG or MagPul P-Mag and initial designs looked a little like the P-Mag, with surface ribbing for grip and structure. Made of an injection molded polymer, crush-proof cases prevents spillage of lubricant and bending of rods that they say current issued kits don't. The cases are long enough to old 3x sectioned steel rods, required to remove barrel obstructions like mud, stuck cases or squib rounds. They also include a couple of brush heads, and eyelet head, and a T- handle to drive the lot of it.

The production models include bore brushes for 5.56 as well as 7.62 and 9mm, as well as a dental pick, for all that carbon scoring. The polymer is chemical resistant so the case can be used as a miniature solvent tank, as well as acting as a container to place small parts of a firearm while cleaning.

They also offer them in a couple of different colours, black, tan, green and red. The internal dimensions are 1.8cm (0.72") x 5.3cm  (2.10") x 19.3cm (7.62") and externally 2.4cm (0.95") x
6.7cm (2.65")x  20.3cm (8").

I will be setting mine up as snack and tool carriers, perhaps using the red one as a dedicated boo-boo set, with alcohol wipes and small dressings, maybe even one of the Z-Medica quick clots. I can't comment on the quality of the cleaning tools myself, but I asked out one of my trooper friends to trial it out for me.

"The cleaning kit was a great bit of gear. First i would like to say that the case it comes in is a fantastic piece of gear. It fits in a spare mag pouch nicely and is easily accessible. The frogman lube is a great and does a good job. I found the wire brushes a bit too harsh though and the pull through rods rusted up very quickly. I was impressed with the extra brushes it came with. Its definitely a cleaning kit I carry in my webbing now." - K Taylor WA


The folks at MS Clean copped a lot of flack over the shape and design of the cases, being so close to "real" magazines. Here's what they had to say:

MS CLEAN may be mistaken for an actual magazine 
MS Clean is designed to utilize standard magazine pouches; however, these pouches are modular in nature and as such, the pouch selected to store MS Clean should be mounted in an area where it is not easily confused with an actual magazine.

What happens if I am in the dark and I go to change my magazine and try to put my cleaning kit in my rifle and get myself killed?
You won’t. You are a professional soldier or law enforcement officer, you have undergone months, if not years of training and you would never be so daft as to put your cleaning kit among your actual magazines. You would put it in somewhere else on your gear that wasn't on the front of your vest.

They are pretty prefect for my applications, and I look forward to kitting out my adventure gear (not to mention my kooky-costuming) with them.


To add to the mix, they now have a second Kickstarter underway for the DOUBLE sized kits. Twice the storage, twice the options, including a dedicated medic options, a trauma kit and super-deluxe cleaning options.

Review: Snow Lizard - SLXtreme 5 iPhone case

Attentive readers may recall the Kickstarter for the rugged, batter and solar powered phone case, the SLXtreme that I covered a while ago. You may also recall how I took it on the Tough Mudder twice last year but it didn't survive the second attempt.

The hinge cracked and I had some water leakage into the unit, temporarily shorting out my phone, and killing the unit. I was sad, because it was otherwise a great piece of kit, but I also realised that I had put it through a pretty arduous test for a phone case.
However, undaunted, when I saw that Snow Lizard had gone on to make a case for the iPhone 5 (which I had subsequently upgraded to) I got in touch with them to let them know that I was keen to put it through its paces, and they kindly sent me a replacement, in the form of the new and improved SLXtreme 5. In safety orange no less.

It features all the same aspects as the previous model: latch-locking top opening, press-button battery-check and solar power switch, 2,550 mAh battery, membrane speaker

and mic covers, rugged buttons for volume and "home" buttons, a lanyard loop, capacitive touch-screen membrane.  It also sports a thumb-screw bottom sealing latch, and an access port for both USB charging and for the headphone jack. Forward and read-facing camera ports allows for photo and video capture and selfies.

There had been significant improvements as well.The in-built battery is 550 mAh larger in capacity over the "4" version.

 The bottom access port is now tool-free access (even though previously all you needed was a coin), the main latch is now a two-part metal, rather than polycarbonate.

The most exciting new feature however was the headphone jack socket and adapter. With an o-ring sealed plug, and matching sealed adapter, it is possible to have the phone safely cocooned and waterproof, as well as having access to headphone and mic jacks, a feature I've missed since my yellow Walkman days

As with the previous model, the SLXtreme 5 is rated at IP-68 with an operational depth of two meters, so in theory you can take SLXtreme anytime you are in or around water. It doesn't float, however, so I kept mine well attached to myself with a lanyard of paracord. This "open" shot gives you an idea of the engineering used in this cases creation, and it certainly paid off.

having access to the USB port (not the Lightning port of the phone, mind) allows you to charge the phone and its built in battery, but not synch, as far as I can tell.

The main port includes optically clear and easy to clean lenses, padding and improved closing latches, as well as hinges, substantially stronger in design than the previous model, I was pleased to see.


The solar panel was also improved, with a more matte finish to the surface, and what looked to be improved collector crystals internally.


The finish and the feel of the case as a whole was a lot more refined, and with the extra metal hardware, and the changes to the bottom panel, I was really impressed with the design improvements the Snow Lizard team had put into the next model.

When I took the plunge, (so to speak), and took my phone in its new case into the warm waters of Fiji, I knew I was going to give it a good test. With its "2m" depth rating, I was trepidatious  about how it would survive the trip, but as you can see, it worked wonderfully.
I had to remind myself a few times to use the buttons to control photo operation, as the main screen doesn't work under water, but I was able to switch between still and video controls on the surface easily enough, with just a flick of the wrist to clear water from the surface.

I found that the edges were a little tight, when dealing with water droplets, for dexterous screen manipulation, but the macro-control I needed worked just fine. The phone was bone-dry after almost an hour in the water (and subsequent jet-ski back to the resort), and the footage turned out really well.

All in all, I am thoroughly pleased with my replacement SLXtreme 5 case, and would highly recommend them to anyone who wanted to do some wet and wild filming, mapping, long distance phone calls and catching up on your favorite Apocalypse Equippedness blog from a beach-side or mountain-top retreat with their trusty iPhone.

Review: Strike Industries - SHOX iPhone 5 case

It's no great secret that I am a big phone freak. Since writing this blog, I've covered my iPhone 4S cases, namely the OPT silicone-armor case, a Maxpedition iPhone pouch, the feature rich Snow Llizard-SLXtreme "ruggedized" case, the hunter-friendly Griffin "mossy-oak" Survivor case as well as my most recent addition, the Strike Industries Battle-case (on top in this picture).

 When Strike industries sent me the 4S compatible Battle Case, they also kindly sent me their newest, 5/5S compatible case, the Battle Case Shox  and accessory pack!
 The most exciting part about the SHOX case, apart from having the same grippy, textured thermoplastic polyurethane material, is that the SHOX has built in shock absorbing springs built into the corners! Beveled lips hold the phone snugly in place, and keep the sides dust free.

The springs add a certain bulk to the corners of the phone, which I have found to be quite an exceptional addition, as it means that the speakers are off-set, and when held, are not blocked by the edge or heel of my palm. A built in sound reflector adds to that, without expanding the dimensions further. They also add a nub to grip on, increasing the retention capabilities of this case. Power and volume buttons are permanently protected, but accessible through the case.

The lines of those spring bumpers are combined with the finger loop, which as in the original Battle Case, provide a tremendous advantage for drawing the phone from a pocket or pouch, as well as retaining it in the hand, by carabiner or lanyard. Unlike the Original Battle Case, this loop is at the "top" rather than the "bottom" of the phone.

This case lacks the honeycomb macro-texture of the original, but instead features ridges, as well as bevels around an internal storage area, large enough to fit a couple of credit card sized objects.

These are accessible via a slot on the side, and visible through a window in the middle of the case. Both the window and the opening slot act as heat vents, I've found, especially useful when the phone is dash-mounted in my vehicle. The camera opening is wide enough to accommodate all the sensors and flash easily, reducing back-scatter considerably. 

Looking inside the case you can see that it has additional internal structure to add to the padding and protection that the semi-rigid polyurethane offers. I have also been using the clear plastic camera guard, which is included in the "plugs accessory set" and sits in an insert holder.  The other accessory plugs have been too much trouble for my day to day use, but for dust-proofing, look like would all serve their purpose ideally, except the sound-reflector cover, which I couldn't get to sit in the case correctly.

All in all, this is an excellent case, and my iPhone 5S is happily encased, protected and secure. I noted that several "third-party" Lightning plugs were too wide to fit, but a quick pass with the Dremel sorted that right out.


Also, for those that complained last time, Strike Industries now stock a Samsung S4 Active version and for the candy-coloured wolves out there, a iPhone 5C version as well.

Wish-Lust: Kickstarter Juggernaut - iPhone 5 case

I've been terribly remiss, and wanted to quickly get a post up about a Kickstarter from Juggernaut Defense which is almost at the end of its pledge pitch, and has a ways to go.

Ever since I killed my iPhone 4 SLXtreme hard-case whilst doing Tough Mudder, I've been on the lookout for upgrades.

When I saw the iPhone5 Ruggedized/Wearable case from Juggernaut on Kickstarter, I knew I had to be in on the action.




These are some of the reward options, I'm especially keen on the PALS/MOLLE mount, and the forearm mount, as well as the case itself, which will be Water proof, Dust proof, Drop Proof - (to IP-67standards), the front screen will feature hardened anti-glare glass protection (whilst still being capacitive) and the case itself will be built for quick phone insertion and removal, as well as the quick release mounting options I mentioned before.

Two styles of chest mount: PALS/MOLLE if you're using a compatible vest or plate carrier (or even something like the Hazard4 Ventrapack) or a Sternum Mount to interfacing with a backpack, hydration pack, or other shoulder straps. The wrist mount, not unlike the Platatac Recce map holder it provides a hands-free use option, which secures over a range of sizes using a "BOA mechanism", especially suited to wear over clothing.The final mount option is the vertical backpack strap mount, which places the case in portrait (vertical) position. This mount is in development and Juggernaut promise to share updates as we build prototypes during the Kickstarter project.

The case itself (prototype pictured here) has a single opening end with a sealed access door allowing fast insertion and removal of your phone. It has a large robust latch, so there is no hassle with snap on or screw together cases where sealing can be compromised.

All phone controls are accessed through sealed, nickel plated stainless steel button modules, although the Fingerprint scan is not an option.



All phone cameras and LED flashes use optically clear sealed lenses so that the camera and flash work while inside the case, that's a real boon, especially considering the fuzzy photos I took with the SLXtreme case. The data/charge connection is accessed through a sealed door on the bottom of the case and secured by a captive thumbscrew, which cant be lost or dropped, compromising the case.

All in all this is a really impressive case, and system as a whole, and I really hope that it funds, or if not, that they end up doing a production run at some stage.

Review: Strike Industries - Battle Case iPhone4

I tend to burn through "regular" phone cases, which is why I have had ones like the Opt Silicone Armor as my every-day case, and collect "extreme use" cases like the Snow Lizard SLXtreme and the Griffin "Mossy-oak" Survivor and as cool as they are, they are overkill for my regular use. I need something that will give me easy access to all my ports and buttons, protect my glassy faced iPhone 4S from drops, spills, and sticky faced and fingered small humans, without being a brick on the board room table.

I has spotted the Strike Industries - Battle Case when I had been cruising their site for the Tactical Sling Catch that I picked up, along with the Picatinny vertical sling-loop and later on, the Simple Plate-Carrier satchel they were kind enough to send me, so I finally got around to placing an order.

What had initially caught my eye, other than the slim design, was the large "quick pull loop" not unlike the Magpul loops available for magazines.
I also really liked the extra features hidden away within the case.  I am a sucker for extra features, as many of you will already appreciate, but these two were very simple, and elegant additions.

Recessed into the case was a large depression, which Strike Industries have designed to fit a special kevlar insert (for non-ballistic protection only) to bolster the protection offered by the stiff but flexible thermoplastic of the case. A second recessed spot allows a protective lens-cover to be inserted.


 The outer face of the case is macroscopically honeycomb patterned, with a fine grained rough texture for added grip. I really liked the pattern, it is sufficiently contoured to add grip, without being overt. A very subtle surface.

I had wondered about the lack of padding, and how that would protect my phone, but I can honestly say that I've had no reason to have been concerned. I've not changed my usage, and the phone is just as whole as when I had it wrapped in silicone and wire.

The thin side edges are even further textured, with these seven notches in the front and back, adding to the positive grip you can get on it. Between these, and the quick-pull loop, through which I usually curl my little finger when holding the phone, I have not once dropped it, and have frequently carried the whole thing in my teeth, mostly by the ring, when I've needed to go "hands free" without wanting to re-holster my phone.

That loop will easily fit three fingers, two when gloved, which also means that I have been able to secure my phone into much tighter pockets, as I can yank it out easily, with no snagging, no hanging-up just a clean pull.

The honeycomb pattern on the surface of the case really adds to the grip, as well as offering a nice visual pattern. Each of the hexes is also textured with a fine leather-like pattern. This pattern is not unlike the Magpul magazine pull-rings, it fits really snugly in the hand, lays flat on a car bonnet, dashboard or whatever, even at quite an angle, without sliding.

The sides of the case have an extra layer of gripping features, the seven notches on the bottom half of the edges. These really add to the drop-free design and give me a lot of confidence, even when I don't have fingers curled through the quick-pull loop. The leather-like patten continues along the sides as well.

As well as the large loop, there are two eyelets that not only add to the flexibility of the loop, but also adds a connection point for a lanyard, if you don't want to add it to the main loop itself.

I found that my only gripe with the case is how well it fitted. Ironically, the snug fit of the screen-edge lip tended to lift my screen protector, leading to it bubbling from time to time, mostly as a result of the alarm-clock-dock I use not accepting such a hard-core case (this is true of almost all my cases, as it happens, no fault of Strike Industries. I suspect if I didn't continually pop it in and out of the case, that wouldn't be an issue.

I haven't had any issues with the factory-standard accessories for the phone, but some after-market chargers need to wiggle the case apart a little to get them to seat properly.Totally workable. This is one of my favorite cases and it gets a lot of positive comments, even at work. This is a top notch case, that offer slimline protection for my favorite electronic urban-survival tool!

One last thing, the fine folks at Strike Industries also sent me a deluxe set (including lens covers and plug-caps) of their even MORE rugged, spring-enhanced iPhone 5 SHOX Battle Case to review, but alas, I don't have an iPhone 5 .... so, if you live locally to me (Melbourne, Australia), hanve an iPhone 5, and an interest in a rugged, hard-core and stylish case, hit me up, and I will send it your way, with the proviso, that you give me a review to publish!

Review: Griffin - Mossy Oak Survivor iPhone case

One of the contacts I made whilst at the SSAA SHOT Expo was Peter Ferrigno of Griffin Technology, who showed off one of their pretty hard core iPhone cases. I've covered a couple of cases before, in the Snow Lizard SLXtreme case and the Opt Silicone Armor case.

Being a Sporting Shooters type event, Griffin was displaying the Mossy Oak variant of their Survivor range, Peter was kind enough to send me one to have a play with.  This is a three part case, which Griffin report being compliant to MIL-STD 810G standard.
 
Griffin demonstrations for this case include imbedding it in a block of concrete and hammering it free, which is pretty impressive. The three components of the case are the main body, the removable face-plate, and the belt clip.Here's how the whole case it put together:

The outer cladding is made of shock and vibration-absorbing silicone, whilst a polycarbonate shell provides the outer structure and is also the patterned component, for your Mossy Oak needs.

Inside the outer cladding, the inner structure is again the hard polycarbonate plastic providing inner support and is backed up with foam padding to add to the internal shock absorbance.

A scratch resistant polycarbonate screen cover clips into the main outer cladding at six points to lock into place.






The belt clip attaches via two clasps that lock onto the top and bottom of the phone, and will work either way up, to suit your tastes and how you wear your rig.

You can see here that the back panels of the phone have a couple more polycarbonate sections with the Mossy Oak pattern showing through. You can also see the clever swiveling camera port, which is inset into the backing.

These ports follow the same pattern for all the access points of the camera, and whilst they don't offer submersion-level protection, I imagine that they would shrug off anything but total immersion. This is a weather proof case with a lot of thought put into the needs of the outdoorsman.

Each of the audio port, mute-switch and power socket ports are covered with a thick, snug fitting silicone plug, hinged and deeply set, almost difficult to open, so no risk of accidental exposure.

 I found the home button a little tricky at first, as it needs a good solid press to activate, but once I have the angle down pat, it was a breeze to operate.

The polycarbonate screen protector was really responsive, and tactile, which was a nice change from the somewhat sluggish response from the SLXtreme case, even with a film screen-guard on my iPhone. The audio was pretty clear, both receiving and making calls, and the front facing camera still worked fine for all my tacticool selfies.

The belt clip deserves some more description too. Fully swivel-able, in stiff slicking fashion, the clasp itself has a latch over the opening end, to lock it closed, to prevent accidental un-clasping when you are belly crawling in the wilderness. It also will lock open, and back, to create a stand, which is a nice addition.


 The all-important PALS/MOLLE test was a great success, and showed that not only did the tongue of the clip fit into the channels nicely, but that it could be swiveled in place for optimum viewing angle, and detached from the backing for use easily, and replaced just as easily.

The biggest drawback I had with the case was that the power socket plug was too small for me to dock with either my in-car music/charger or my desktop docking clock-radio. However, when I was out and about, this wasn't really an issue.

Being a clip-on cover, and the way the access ports close, this isn't a submersible case, which means I wont be strapping it to my chest on my next Tough Mudder, but it IS really weather resistant, which means I can keep using my phone in Melbourne's inclement weather, and not worry about shirting it out.

All in all this is a very rugged and hard wearing feeling case, and I have no doubt that I could hand it to any of my kids and expect to get it back fully functioning, if a little sticky. Perfect for distracting them when taking out zombies or triffids in the front yard!