Review: MyMedic - MyFAK

Accidents happen. Burns, cuts, bumps and breaks can come to anyone at any time.  Having a first-aid kit to hand is a vital element to anyones preparedness loadout or lifestyle. Whether you're hiking in the bush, cutting firewood, camping, on a road trip, driving nails in the backyard or hitting pipe in the sandbox you'll want to be able to plug holes and tend to boo-boos to get on with the task at hand. I keep a generic first aid kit in the bottom of my day-bag, and have a small IFAK on my hiking belt, but there are some jobs they just aren't up to and frankly, being stuffed in the bottom of a pack does not make for rapid treatment in a critical situation.

This is where something like the purpose built MyFAK from My Medic comes into its own. Jam-packed with a very comprehensive collection of needful and useful items for treating a variety of ailments and accidental injuries. It does so all encompassed in a tactically minded form-factor. 

 With contents suitable for airway, bleeding, burn, hydration, outdoor safety, sprains and fractures and specialty surgical incident as well as topical treatment, the MyFAK  has packs that caters to both Basic and Advanced First Aid needs. (Available in two different configurations to suit your ability and need).

"By ordering MyMedic First Aid Kits you warrant that you have the required training and authorization to use the medical supplies contained within. MyMedic assumes no liability for their misuse."

  

https://mymedic.com/collections/first-aid-kits/products/myfak-firstaidkit

The 1000D cordura pouch measures 6.5" wide, 7.5" tall and 5" deep, its no slouch. The advanced kit weighs 1275g, the same size basic weighs a mear 975g. The front of the pouch is rigged with 6" of loop field, in 3 2" strips, with a secondary layer of 1" strips straddling these to provide 4 channels of MOLLE attachment, for those of us who like pouches on our pouches or for stowing additional accessories likepens, lights, cyalume sticks or pry-bars. A 1" wide nylon strap runs all the way around the pouch, with a fastex buckle to keep it fully secured to the backing and fully closed> This is especially important as the backing, which features not only two press-stud closure MOLLE straps but the entire back is hook and loop for tear-away capability. a 1" nylon grab handle allows for positive grip and when unbuckled the MyFAK can be torn off your pack, or load bearing gear for ease of access or to pass on to someone who needs it.

The rip-away design makes for ease of access for what is otherwise quite a bulky pouch. being able to get at it without it being strapped to yourself or a pack would greatly improve your ability to get the components you need in a timely and efficient fashion. Crucial in a medical crisis. The fastex clip is no hindrance to access and does a great job in securing the pouch, but it has two easy-grip rubber toggles with medic crosses to pull the oversized zippers open. A lightly hook-and-looped nylon tab acts as a pull tab to assist in pulling the pouch open and holding it spread. Folding down to the front loop fields to stow out of the way when not in use.

The pouches hook field backing also means once removed it can be stuck to other loop-field surfaces at your leisure.

Opening the pouch up reveals its Tri-Fold Design

MyMedic created this pouch to give you quick access to your First Aid Supplies. This tri-fold design makes it easy to see what you need, when you need it.

Working from the innermost layer forwards the front the back panel has three Elastic webbing loops to contain items, a mylar space blanket, a hank of paracord, a cyalume stick and a RATS tourniquet. Behind that are two pockets with bandages, including quick-Clot and a chest seal. The back most pocket has a hook and loop  closure tab to keep it closed until needed.

The middle panel has more elastic webbing securing more bandages, irrigation saline and suture kits. An additional pocket behind the elastic webbing holds a compressed compression bandage.

I'm really impressed with the amount of material squeezed into this kit, both by clever arrangement of pockets but also arrangement of items. I was tempted to reorganise the kit but quickly recognised I wasn't going to get it any better packed or sorted.



The third section of the internals is the zippered mesh lind pocket panel. It is filled with small items; medications, electrolyte sachets, swabs, lotions and gloves. The section is itself a tear-away as well allowing you to pass it over or just get at it without disturbing the rest of your pristine supplies.

Whilst the rest of the kit is full of bandages, burn kits, and hole closers, the medication pouch holds pain killers, anti-inflammatories, anti nausea and anti-dirorrerals and electrolytes. The mesh panel allows the plastic pouch wrapped medications to be rummaged through. Good if you find yourself off-Oregon trail and not fancying dying of dysentery.  The flip side of the medication pouch provides a smooth field for laying out items: bandages, sutures, tweezers and such as you work on your patient, or just as a cover to prevent debris falling in your kit.

So, apart from being jam-packed with all kinds of goodies and needfuls, being well put together as far as design and layout, and having an excellent quick-release and access options go, this is an excellent First Aid kit.

I find it a bit bulky and heavy to put on my person, say on a battle-belt or on a plate carrier, except maybe on the back. Personally I feel it's suitable to go on a pack, or on a dedicated medic's harness. One thing I saw on their webpage and successfully tried myself was fitting  it to the headrest of my drivers-side car seat. Putting it in easy reach for shot-gun or back seat passengers should the need for road-side assistance come up.

Secured by its Molle straps, to the headrest prongs, it can be accessed by its quick release Fastex clip and pulled free by the webbing drag handle. If needed it could then be reattached in an upright position and unfolded to access its components in a secured place for out the door or back seat triage as needed. Perfect for on-the-move treatment. 

I have a Cert 1 in first aid which is basically: bites, breaks, bleeds and burns and I feel the contents and setup of this kit is more than adequate for my needs, and beyond what I'm trained for in its Advanced format, but not beyond my ability in extremis.

Review: MIG - SORD Mad-Stick holster

My mate Shane from Rhino Ropework (note: they've gone through a branding change recently, now trading as MIG (Mark's Innovative Gear) have teamed up with my friends over at SORD Australia to put together a line of pouches for the most excellent and useful MADSticks by Rhino Ropeworks. You'll recall the MAD Sticks are a compact solid breaching and pry bar, and be pleased to note that they've gone through some more design iterations and are even madder!

One aspect that Shane / Mark wanted to address, is their very pointyness, which even when looped through PALS/MOLLE, can jab and scrape, and the pen-clip type retaining clip sometimes just weren't up to the rugged outdoor needs of some folks, so he and SORD Australia have come up with this 1000d Cordura pouch. I experienced the need for this myself after months of carrying the MAD-Stick around in my fairly rugged Mystery Ranch 1DAP , the point worked its way through the Cordura nylon and stated to poke me in he sides as I walked. This I could mitigate by shifting it around but one time I picked the pack up and the MAD-Stick fell right out and nearly spiked me in the foot.

  As I'd rather not have this happen whilst out in public I had to retire it from my EDC until they good folks and MIG could set me up with a holster.

One did magically appear shortly after I got in touch with MIG, cudos to their customer service. So. The Holster. The MAD Stick is a 400mm (15.7") long, 12.7 mm (0.50" yeah, fifty cal!) length of 4140 high tensile tool steel,  and the SORD design suits it perfectly. Not too snug as to make drawing it an issue, not so loose as to let it rattle about.
The main opening flap is rimmed with hook and loop strips to secure the stick, and backed up with a webbing strap and a Fastex style clip to ad bomb-proof jump-safety to it. Nobody wants to accidentally catch a MAD-stick I assure you. The heavy 1000D Cordura lends itself nicely to giving the whole holster structure and it is heavily stitched throughout. inside the opening flap is a "pointy end down" indicator graphic, but the holster itself is ambivalent. a metal grommet in the bottom of the holster acts more as a drainage point than as a capture point for the spike.  I have also found the chisel end doesn't pull at the hook and loop closures as much as the spike end when doing vigorous runs.
Speaking of attachment:
The back side of the holster features two PALS/MOLLE straps with reinforced stiff panels and a terminal hook and loop strip closure.
Each strip is suitable for 3 rows of MOLLE attachment for a very sturdy fixture. You could strap it to the back of a plate carrier, to the side of a pack or even off the hip of a MOLlE equipped battle-belt such as the Platatac Bongo or SICC belts.

The black holster by itself is fairly innocuous looking but at 16" long it will stand out swinging on your hip. Not very Grey-man. The side-panels of my 1DAP are already pretty crowded so I stow the whole thing inside my pack, unsecured but safely wedged in now that I'm not worried about pointy ends jabbing though my pack. Check out the whole MIG range and new developments here: Now I can keep my totally legitimately useful / rescue tool handy without causing a public panic!
Well done Mark's Innovative Gear and the whole MIG Crew.

Wish-Lust: platatac - G2G pack

I wanted to give the guys behind Platatac another shout, as I haven't had the folding cash handy to add to my gear-wall in the bunker for a while (damn life expenses!) but they have some cool and useful new gear out there and being fielded as we speak.


One of these is the daypack sized G2G of in keeping with the Platatac tongue in cheek naming convention, the Good-to-Go.


The Platatac G2G pack is one of the lightest packs they’ve released to date weighing just 715g (25oz) with straps. Designed with a low profile exterior void of any MOLLE it is great in the field, on and off base environments, not to mention when you want to keep a low profile in an urban setting. Much like the Nomad line of bags they have.

This pack looks perfect as a lightweight day pack, being small and lightweight so it can be stored in the top of your pack and grabbed out to carry rations or needfuls when caching bigger long-haul packs. It is also perfect for use as a day-to-day back pack for the carriage of gym clothes, food, documents, it will happily fir a standard 13" laptop and other similar sized items.

This pack features a capacity of around 26L (1586Cu. inch) in its main zippered compartment containing one mesh pocket and a 3 litre hydration bladder sleave with hook and loop bladder hanger. On top of the pack is a bar-tacked hydration tube/cable routing port. This keeps grit, gunk and crud out of your pack, whilst letting you access your hydration, and run cables.

Externally, the pack features one zippered pouch for quick access to items such as gloves, pens, keys, ID, food and batteries. Externally Platatac have also added a cinch cord system for bundling up garments such as the Platatac Harry series of jackets.

Also the pack includes side tensioning straps for when the pack is full to capacity, especially useful if you are a gear hoarder like I am.

The pack has a very small pack-down size and can fit inside anAlice Pack's External pockets (with straps detached).

 

The G2G pack has been constructed from a mix of  500D and 1000D cordura for heavy duty abrasion resistance.  Platatac  have utilised a lightweight foam sewn in chevron patterns to provide structure and padding without affecting the ability to fold the pack up for storage.

A heavy duty grab handle has been made from 38mm web tape and has been flag stitched for strength.

With Echo Pack straps included this pack is truly good to go.

Here are its vital statistics: the main pocket: 460mm (H) x 320mm (W) x 180mm(D). The

front pocket 190mm (H) 210mm (W).


Inside the main pocket, the internal mesh pocket 120mm (H) x 23mm (W).

The G-2-G also features a 70mm x50mm hook and loop field for IFF, V-Lite, or just morale patches.

As well as reinforced stitched drainage grommets, the G-2-G also features Bar tacking on all major sew points, reversed YKK zippers to keep crud out of your gear, and industry standard and trusted ITW Nexus plastic hardware, throughout.


One of the things I really liked about the G-2-G line, as well as its subdued, no-external PALS/MOLLE webbing, are its range of regular-guy colours; as well as five kinds of camouflage, beat-cop blue, as well as a khaki, tan, ranger green and grey and black.


I really liked the looks of these, when I checked them out in the retail shop, and at the SSAA SHOT show, and thought that there would definitely be a place in pretty much anyone's pack line-up for a bag like the G-2-G.


 Check it out, and perhaps throw Platatac some interest. The more they get, the more they will innovate and develop new packs like these!

 

Review: Propper - Range Bag

First seen on Breach Bang & Clear ....
Here's a follow up from my sneak-peek review of the Propper Range Bag. I took the Range Bag with me on an international trip to the jungle-covered mountains of Bali, Indonesia in mid October for a family event, rather than for a Tropic Thunder or Rambo4 themed get-away ... I wanted to maximise my gear-totage, as well as my carry-on capacity. The Range Bag was my upgrade to the very similar Propper Multipurpose Bag, which I had been using as my every-day bag and as carry-on for some time previously.

The Range Bag is in many respects an up-sized version of the Multipurpose Bag, with many of the same design aspects, such as the long-side opening panels, the double zippered opening top lid as well as it's carry handles and the like.

I decked out my bag with a variety of airport-safe goodies, and needfuls, and set out for international customs and far away vistas. I checked out the 48cm x34cm x 23cm size restrictions on Virgin Australia's international carry-on regulations, and had already confirmed it was good-to go.

Almost twice the width of their Multipurpose Bags, the Range Bag measures 25cm x 38cm x 23cm (10" x 15" x 9") and as I mentioned is a beefed up and expanded version of the MPB. Padded on all sides for increased protection and rigidity, it holds it shape even when empty. There are two stiffened internal dividers, fitted with flaps with hook-field ends to affix the dividers to the fine-finished loop-field covered internal walls of the bag.

These walls can be adjusted or discarded, as fits your use or mission, and the whole of the internal cavity is lined in hi-contrast orange, to help you find your OD tool in its OD sheath in your bottom of your OD bag. I fitted the "back" compartment of my carry-on with a 1L Nalgene bottle, a folded up First Strike Snatch-Bag ii for any extra incidental bagging I might be needing. In the center compartment I made, I had my novels and iPad for in-flight and hurry-up-and-wait times, I also included my Propper mesh-sided boo-boo kit, loaded up with all kinds of travel first-aid needs and spares. In the "front" compartment, I had the Propper 5x7 case, which held all our passports and travel documents, and my Snowgum iPhone case as a batter-backup for my phone.

The main compartment has a lockable zipper, good enough to keep little prying hands away from dangerous things.


On the "right-hand" side panel is fitted with a mesh pocket, and a fold-out mat to do your weapon maintenance or lay out a picnic. The Range Bag also comes with a removable hook-field backed accessory panel. I used that mesh panel to stow PPE gear like my Barz goggle sunglasses, earplugs, and other assorted goodies like Paracetamol and Ibuprofen. In the folds of the maintenance mat, I included wet-wipes, and a couple of nappies as well, for on-the-go emergencies, as well as acting as very effective blood-sponges. You know, in case of misadventures trying to get a taxi ...


The large end pocket, I filled with a super absorbent travel towel, two hospital grade sick-bags and my Multicam Headsox . My last international trip involved getting not one, but two lots of little-kid barf on me. Not this time matey! The internal material is also the high-visibility orange, but is off-set by the OD surface material, to make rummaging for items easy, without exposing yourself to unwanted attention by flashes of Blaze. The end pocket had a hook-and-loop patch for securing it, but stuffed full as it was, was not useable. However, the design of the bag kept it all snug and sound. I suspect you could keep a small to medium sized pistol in that pocket, without too much trouble.


The outward facing side panel is covered in a mixture of loop-filed at the top, and two rows of seven channel MOLLE, and inside has another mesh-lined pocket, along with six pistol magazine sized pouches. I stowed personal electronics cables and the like, as well as parkers, crayons (good for both occupying little people as well as waterproof communication and as both kindling and illumination purposes (they make pretty functional candles), as well as an asthma pump.  Again, the lockable double zippers allowed me to have a sense of security around both theft and also being reverse-pickpocketed with contraband materials. Indonesia has a death penalty for drug smuggling.

The front side panel is also fitted out with more MOLLE channels, but I didn't make any use of these. I can see any number of small pouches and carrier working well there though.

One thing I found was that it was very convenient to have the internal compartments, which allowed me to set very specific places for my load. Not misplacing travel documents, (or perhaps a backup pistol, if that's the way you pack)  is always a good thing. That said, the extra width of the Range Bag over the Multipurpose Bag meant that it wasn't as easy to rip back the top flap one handed, to get at the insides. the zippers were too fine, and pinched when I tried a few times. Slow and steady wins the race in this case.

It was also pretty comfortable to heft around, the internal padding not only kept my gear safe and secure, but also kept them from jabbing me in the hip and kidneys as I carried it all around.



I also liked that I could pull open the side panels to access the gear I had in there, on the fly, and that it acted as a mobile platform to work from.

Even with a pack on my back, the Range Bag on my hip was able to be swung around and rummaged through with no real problem, and its broad top even acted as an additional platform for carrying more things (or even little people as a bench-seat). The shoulder straps were both just wide enough to spread the load and not too big as to get in the way. The sliding shoulder padding I found was placed in an awkward place, due to the broad tri-glide adjuster, but I managed to feed it into the padding strap eventually. I didn't like the clip-attachment the shoulder strap had though. The broad Fastex buckle from the Multipurpose Bag would have been much better, and enable a one-handed quick-release, in the event I needed to drop and go. With the heavier load of the Range Bag, this would have been even more useful.



I made use of the fold-out mat a couple of times, mostly doing paperwork and the occasional fix-it session, the finish was good and gripping, and not tacky, which is a plus to my mind. I didn't loose and widgets, or little screws so I'll call it a useful addition.

The Range Bag ticked all the boxes for a carry-on bag, as well as a travel accessory. I don't like taking anything I can't carry or sling onto me. I like having my hands free for whatever might come my way, so the Range Bag was a logical step up for when I needed to carry a bit more, or if I needed to carry bulkier, heavier items than I might have otherwise done. Need to carry a bunch of lead to and from your favourite pew-pew place? I have no doubt that your personal needs would be met with this bag. Need to run up and down a hill? Get a ruck.

Review: Dual double mag pouch

Here's another item from my bulk load of pouches and packs like the S10 Haversack that I have been slowly rolling out. I had a windfall of a truckload of army surplus gear ages ago, which have been sitting in the bunker, being musty, but there are some real gems in there. These may not be the cutting edge of high-speed, low-drag gear, but have been mil-spec at some stage, so they're damn tough, if nothing else.

This particular pouch came from a box full of here, and I just reached in and grabbed one at random. You can see it's already had a rough life, but has held together.

This double, dual-magazine carrying set of pouches is made of a high Denier (800-1000 I'd guess, by the feel) and are built into a single backing. From the frayed stitching marks, I'd guess that they originally came with some sort of Fastex style clips to act as the primary closure points for the box-like pouches, but was probably removed to speed things up in the field.

A broad loop-field panel on the front of the outside of the pouch acts as the primary closure as a result, with a corresponding hook-field inside the box-top lid. A tongue of webbing with a hook-field can be pulled out from inside the pouch to mate with the loop-field on the front to neutralize the hook-and-loop closure entirely, which was probably useful when the original Fastex loops were still in place.

Internally, the pouches have been given a polyurethane coating for additional waterproofing, and are double stitched throughout. Drainage grommets with a wire mesh grit filter are found in the bottom of each, this would act to keep the grit and sand out of your magazines, and was a nice little feature.

The inside of the box-lid has a little pocked sewn in, big enough for a MRE packet of waterproof matches, a P-38 can opener or maybe a button compass, I found a couple of match-packets and even a couple of water purification tablets when I went through the pouches.

The back panel of the pouches have several different ways to mount, and also shows the vintage of the pouches. ALICE style brass-wire belt hooks, and no PALS-MOLLE to be seen. A pair of steel rings allows extra strapping to be attached to sling the pouches, though the angle of the two ring mountings being different suggests there is a "right way" to do this. A question for the veterans out there. What gives?

The pouches have been stamped with a NSN, but they are all so aged that I couldn't make out the cage numbers. I'd say these pouches would work well doing double duty in much the same way as any of the Platatac FUP or bigger pouches I've grown to love, but with a far older look.

 

Review: Propper - 7X5 Pocket Carry Organizer

As first seen on Breach Bang & Clear:

I took a trip with my family to Bali, Indonesia recently to attend my mother's wedding, and it turned out to be an excellent opportunity to put to good use of of the kit that the good folks at Propper had sent me that had been kicking around the bunker.

I wanted something that would keep all my travel documents together, safe and secure and it seemed the perfect fit.

This is the 7X5 Pocket Carry Organizer and here's what I can tell you about it.
Fashioned from the same highly durable Cordura that all the Propper packs and bags are made from, and all the fittings are equally sturdy.

 Named for its primary dimensions the organizer is 7" x 5" x 2"and has twin zippers which open like a book around its two short sides and one long side. The zipper pulls are silenced by being cord-pulled,  to reduce its lines even further.

I really liked the wide loop of webbing that is fitted to the back side, which you might think would get in the way more than would be useful, but it was really good for those long immigration and customs lines, where I'd just as soon not have a handful of passports and tickets waving in the wind but also have a gird firm grip on. It was a long enough loop to be able to hook it over my wrist to give me two-hands free when I needed it. I'm secure enough not to worry about looking like I'm carrying a purse. It'd be a Propper purse, in any case, and that's not shabby at all.

It's no-nonsense lines make for a very unobtrusive package, and I found that it completely vanished into the folds of packs I stowed it in, and also fitted nicely in the cargo pockets of my travel-pants.

The front of the organiser is loop-fronted for adding morale or ID patches. I threw a nice subdued Australian flag on mine, for peace of mind, because it never hurts to get an eye-roll from security and customs ("uuugh, Ahwstrahllians, you go, go!") when you look like I do, some times.

The rear of the organiser has a stow-pocket set high up, perfect for boarding cards and customs forms, and also features two rows and three channel PALS/MOLLE, to either add extra things to, or to secure the organiser to other packs. I didn't see much utility in this though, and other than maybe a pen, I can't see what I'd use the MOLLE for.

Inside the organiser, both faces are loop-filed covered, to affix an internal organiser such as the included 7x5 elastic organizer panel . There are also two thin elastic loops in the seam, great for fitting a pen you'll always find you need to fill in travel forms.

I am usually pretty paranoid about my travel documentation, we have a long standing family history of losing passports, so I am always very cautious of the movement of these documents, so having a safe, secure and most importantly unobtrusive pouch for them was perfect for my wild and wary tribe.

Review: S10 Respirator Haversack

I wanted to go a little old-school for a bit, and cover some canvas era type pouches.


A while ago I covered an Australian issue butt-pack, that I had picked up a number of years ago, and this is along those lines. I managed to score a bulk load of retired stock in the way of pouches and bags, and these respirator haversacks were one of these.

These are British Respirator Haversacks which is NSN listed as 4240 99 800 9601.  They are designed to carry the S10 respirator. I don't have a S10, but do have a full-face 3M 6000 series mask that fits nicely. Whilst I say canvas-era, these are actually a Codrura type nylon, for all the hard-wearing, non mildew and water-shedding goodness modern materials offer.

The bag measures 29 x 26 x11 cms (11" x 10" x 4.5" ) and weighs 475grams. Lacking more modern PALS/MOLLE fittings, the haversack has a couple of different attachment and carry options. A twin-stud openable belt-loop, which also features a wire hanger, from the old ALICE style fittings.

A long nylon strap with a Fastex style buckle allows for a quick waist or shoulder slung carry as well, and there is even a secondary shoestring type cold to further secure the pouch around the waist if shoulder-carried, or around the thigh id hip-carried. The cold can be secured out of the way if not in use, or removed entirely.

One side of the pouch features a hook-and-look pocket, a good size for a survival tin, a GPS unit or other small items you might need in a hurry.

The inside of the haversack is quite spacious, fitting one each of the 1L and 2L Pathopak containers with plenty of room to move. The internal dimension really give you a lot of carry capacity, and the haversack itself it very sturdily put together.

Inside the haversack, as well as the main spacious compartment are several other interesting features.

One hook-and-loop closing front pocket, and two webbing and hook-and-loop holders. These just took the 1L Pathopak's and I expect they are designed to fit additional filter canisters for the S10 respirator.

They would certainly work to fasten and store a number of smallish items, and when not in use, being made up a webbing, will simple squash out 0f the way.

The front pocket has a small hook-and-loop fixture, and features broad pockets sewn in, to fit  NBC combo-pens, morphine syrettes, first aid kit, gloves and the like. They are made of the same material as the rest of the haversack, and whilst if they had been elasticized it would have been good, they probably work just fine in conjunction with the flap.


Even the top of the haversack's lid has some features, as well as the press-stud and hook-and-loop lined lip, there are twin bands of elasticized webbing, to allow you to affix a number of small items like more gloves, a first aid kit or the like.

These may not be flashy and new like a lot of other high-speed gear thats coming put, but they are rough, rugged, dependable and spacious.

If you have some bulky gear you want to have at hand, and in your ruck is just too far away, or perhaps you want to be able sling it to a buddy, stash it under a fuel depot or just need to fit your respirator ... the S10 haversack might well suit your needs.

I've got quite a few of them, and will be listing them on www.tacticalcoyote.com soon.

Sneak Peek: Propper - Range Bag

Here's a First Impression post I did for Breach Bang & Clear: 

So, we're going to try to give our first impressions before launching into full reviews now. The good folks at Propper sent me their new Range Bag, along with a couple of their very slick snag-free Polos. For the time being, I'll focus on the bag.

 Almost twice the width of their Multipurpose Bags (cheers Mad Duo!), the Range Bag is a beefed up and expanded version of it. Padded on all sides for increased protection and rigidity, it holds it shape even empty.

Two stiffened internal dividers can be  adjusted or discarded, as fits your use or mission, and the whole of the internal cavity is lined in hi-contrast orange, to help you find your OD tool in its OD sheath in your bottom of your OD bag.














One side panel is fitted with a mesh pocket, and a fold-out mat to do your weapon maintenance or lay out a picnic. The Range Bag also comes with a removable hook-field backed accessory panel.

 The exterior of the mat-side pocket has two deep pockets also lined with the contrast-orange nylon. The main compartment has a lockable zipper, good enough to keep little prying hands away from dangerous things.

The off-side panel is covered in a mixture of loop-filed at the top, and two rows of seven channel MOLLE, and inside has another mesh-lined pocket, along with six pistol magazine sized pouches. The front side panel is also fitted out with more MOLLE channels, and the rear features another deep pocket.






All in all this looks like a very serviceable bag with both a lot of features, but also a significant capacity upgrade over the already-good Multipurpose Bag.
I'll use it for a while here down under and report back on how it holds up.

Interview - I'm Spartacus : Custom Packs and Bags

 I was put on to Scott Fraser and I'm Spartacus custom made backpacks, hunting, tactical and outdoor gear from my friend Shane Marks of Rhino Ropeworks (now renamed MIG Custom Tool Makers) who had a pack custom made by him. I wanted to reach out and get some exposure to a small Australian maker, because it's always good to help out the little guy. Scott seems like a bang up fella, so have a read of what he has to say about his business "I'm Spartacus".

Firstly I am a rock climber, I started climbing in scouts back in the late 70s and went on to be a queen scout. I went through scouts with the infamous Gerard Baden clay, but don't hold that against me.

I started making gear with a sewing awl because good gear just wasn't available in Toowoomba, the regional town I grew up in. I hand sewed an internal frame pack, which took about 8 months, but it was strong, and I still have it somewhere. Sewing by hand is laborious.

Some of my friends saw my gear, liked it and asked me to make them gear. So I bought small singer machine, and taught myself to use a sewing machine.

In 1984 I was going through teachers college, and I worked a summer job on a production line for "aeronautique equipment" which had a military contract for field packs and parachutes.

Stuart pack

 The owner was a somewhat eccentric ex French paratrooper, who knowing what I know now, probably had PTSD, from the Algerian War. He used to scream at you while you were sewing like a drill sergeant. He favourite saying was "your sewing machine is your bread and butter", he sounded like the French knight in the holy grail. I named a one of my machines after him, it's Le pain et la buerre (bread and butter in French).

I made rock climbing gear, and other equipment, I even had a large contract to sew wheel chair upholstery for a  friend who had broken his back in a climbing accident. I also was the only company who repaired bush walking gear in Brisbane for years.  Repairing gear is, in my opinion, the best entree into gear design, it teaches you what works and what doesn't, it teaches you about Material properties and how to make gear bomb proof.

Panzer Jäger

I was a big fan of Macpac gear when it was still owned by Bruce Macintyre, and it was still made in Christchurch. He ran his company on ethical and environmentally sound principles. He also held out getting his gear made in Asian factories. To be competitive against gear made in low labor cost countries, he simplified his designs to their bare essentials, but was still able to manufacture, tough, practical functional gear. His designs were elegant in their simplicity, like a good Japanese haiku. I even visited his factory once. This design philosophy has been something I try to aspire to. I worked at a Macpac retail shop after production went offshore. It is hard to keep the simplicity when the public want complex, busy designs, and Asian factories can manufacture complex designs cheaply.

merkava mkII

The other thing I took from Macpac was the way the pack would work with its user,   To be comfortable, and energy saving while it was being used. I currently make each pack to fit its owner like a good tailor made suit. I have the experience and knowledge to make designs which can be adjusted between users, but I prefer to tailor it for its intended owner, I believe this is a unique niche, which isn't offered by other companies. And all my designs are customisable to suit the owners needs.

I took a hiatus from making packs in 2004 and only started up again at the beginning of this year. I still climb, but I also bow hunt, and I thought my new market would be for quality customised packs for hunters and military. Ironically I am making slow inroads with this market. Having said that, word among the QLD climbing community has spread fast that I am making gear again, and that is where I am getting the bulk of my orders from.

Merkava mkII

I was recently given a contract to supply a quantity of gear to a university climbing club, they are still using gear I made them 17 years ago, and had been used hard. I love the idea that my gear lasts and is tough. When I make gear I over build it, and put a lot of hidden seems into the packs so that it will last.

I currently have four packs aimed, no pun, for the hunting/military market;
All of the, are named after tanks,
Going from smallest to largest they are:
Stuart M3, 20 liters, it is a small tear drop day pack using tough materials, Mollie, sr25 buckles etc

Sherman firefly, is a 3 day assault pack, it is short and deep, designed to be used with military webbing and pouches, it is 30 liters

Panzer jäger, (Shane's pack) it has an organiser front pocket which is floating using stretch panels, and has a pass through option for a bow or a rifle. It is 35 liters my and has a HDPE sheet and alloy frame stave, and lastly the 

prototype Merkava

Merkava, which is 40 liters, it has a continuous zip which allows it different access options and can be zipped flat. It has an internal frame and loads of internal organisers.

The next models will be a smaller version on the merkava and a 60 l top opening internal frame pack, it will have mole and combine features of military, climbing and bush walking packs.

I use a just in time manufacturing system, which means I have small quantities of different camp patterns, rather than big rolls of one or two camouflage patterns, this allows a high degree of customisation. I currently have 16 camouflage patterns, including some quite exotic ones. I also offer some hi tech materials such as stretch Cordura, PTFE cloth, water resistant zips, xPac etc. I also have laser cut hyperlon components, and sheet hyperlon etc.

prototype Merkava

I'm having great fun and enjoying designing, testing and making gear again. I love the challenge of making gear to customers needs and enjoy new challenges, it's a huge learning curve. I make all the gear from go to woe in Brisbane and give the customer pics as I am making their gear and interact with the customer and can make adjustments to the design on the go.

Thanks again for the opportunity to review my company, which is called "I am Spartacus", I choose this name because it reflects, strength, integrity and courage, values I espouse, and Spartacus was a slave, who revolted against the system and threw off his chains, other great values.

Scott Fraser

So, there are some good looking packs being made, and Scott is more than happy to build one just for you, to suit your needs.