Review : Aerial A1 suspended tent

Its no secret that I'm a fan of hammocks and if I had my way I'd never sleep on the ground, but the inevitable sag can lead to a banana shaped sleep which some can't abide.
 Options like the fabulous and fun Tensile tents provide a flat space but need three anchor points, and more traditional hammock systems like the Sierra Madre Nube are comfortable but don't resolve the sag issue. A very exciting and innovative option is the Aerial A1 by Opeongo which I backed on Kickstarter. After the usual development and manufacturing delays, I was delighted by the end product. 

The principle of  the A1 is to form a semi-rigid cot, by stretching the four corners taut via a pair of webbing loops that are strung around appropriate supports, tree trunks or beams. This forms the base ontop of which the tent component is built. Each short end is held rigid with the inclusion of a spreader bar.
A single 7000 series aluminium pole with spreader-bar held in place with clever clasps suspend the internal mesh body and give it near vertical side-walls. The base features a bath-tub bottom and is made of 210 Denier, ripstop nylon (PU 4000) and the mesh walls features full size zippered openings on both sides.

The main feature that allows the A1 to achieve its exceptional comfort and stability is the unique, slackline inspired, suspension system. By wrapping high tensile webbing straps around a tree and pulling them back from both sides of the trunk the A1 is able to achieve a four point connection system. Using this four point system, along with tension and two spreader bars at the head and feet of the base it is able to create a sturdy, flat platform that feels similar to a high quality cot. The webbing suspension (PES (Polyester) rated to  14kN /1450 kg (3200Lbs)) also provides spring like a mattress that helps absorb movement without being tippy or bouncy. 

This flat sleeping surface provides the ability to sleep in any position, back, side or even on your front.The secret to the suspension tension is the buckle system. The AustriAlpine are rated to  15kn / 1528kg (3370lbs) and are made from ultra lightweight alloy. The system works by having a simple self-locking dual-buckle at one end's corners. This lets you set up one of the webbing straps  (6m (19'8") or 8m (26'3")) straps at one end, as a static length. The dynamic end features a pair of off-set buckles. 

This enables you to take advantage of the RollerCam fitting to tension the whole system up. To do so simply feed the webbing through the first off-set buckle on the A1 and then back to the Rollercam returning back to the second off-set buckle on the A1. This simple system 3:1 purchase creates a 4:1 mechanical advantage which is more than sufficient to create a nice taut, flat surface. Each of the webbing straps has a boldly embroidered + mark in its center to assist on centering the straps which was a nice touch. 
The removable fly is lightweight, durable, made from a  premium 40 Denier nylon and has a 1500mm hydrostatic head waterproof rating. 

The fly is completely separated from the internal mesh body by the spreader bar and main ridgepole, which  prevents condensation build up, promotes good airflow and prevents contact weeping.  The base has  a footprint of 203cm x 69cm / (80” x 27”), which is plenty big enough for me to stretch out on, even when Tactical Baby joins me. It is also no coincidence that the footprint matches a large Therm-a-Rest® mattress, which would be great insulation, let alone padding, but I found the cot-like finish very comfortable on its own. The fly open on either side or can be stretched open to form 17” vestibules. guy-lines and Y-shaped stakes are included to stake out the vestibule. The clever design of the A1 also allows for it to be used as an on-ground tent, with four Shepherd Hook stakes to stake out each corner. Its peak height is 90cm (35”), which is plenty high enough to sit up in.
Inside the tent there are three well placed pockets to hold all your needfuls. Two medium size pockets on either end and one 'sky" pocket in the ceiling that is the perfect place for putting your head lamp to light up the tent at night, or an iPad to watch a movie. None of these pockets are heavy duty, and the outside attachment points work better for hanging a bottle, or your boots but for glasses, a flashlight or devices, they work perfectly. 

The system as a whole, packed down measures  67cm x 13cm (28” x 5”) in its slingable stuff case and weighs 2.70kg (5lbs 15oz) for the full system, or cut down to 2.45kg / (5lbs 6oz) for a slung trail set, or 1.86kg (4lbs 1oz) for a ground-based set up. Leaving out the stakes, straps and roller-cams cuts weight, crucial when ounces mean pounds. 
 This shelter is very easy to set up and only takes about 6 minutes. (once you get the suspension buckles sorted out. )The A1 makers state it will be stable on trees with a diameter as small as 5”, though they recommend using healthy trees with a 7” - 25” trunk. I set it up on painted 5"x5" beams with no trouble. The standard webbing provided allows the tent to be set up between two trees spaced 10’ - 25’ feet apart. For trees spaced 10’ - 16’ apart the webbing will completely encircle the tree for maximum hold. I recommend using the long webbing lengths at the Roller-cam side, for maximum cinching length. 

The A1 has a suspended capacity of 200kg (440lbs) so you probably wouldn't store your gear in there with you, but OpeonGo offer an under-slung gear hammock to keep up to 27kg (60lbs) of things off the ground, yet easy to reach (it doubles as a vestibule ground mat in the un-suspended set-up). They also recommend not setting the A1 up any higher than waist high, for ease of entry and safety. A good rule of thumb is never to sling a hammock higher than you're willing to fall. The 5" high tub walls of the base provide a good support in the event of leaning or rollovers in the night. I've found it to be very stable, even in high winds and with the fly staked/ pegged down, very rain resistant. 

The Aerial A1 can also  be pared with the A1 Underquilt to provide maximum warmth for winter camping.

This is a great system, light, comfortable and versatile. I'd highly recommend them to anyone looking for an off-ground option. Outstanding design and top notch engineering.

 

Review: Range - Treeo hammock

An innoxious bundle concealing great potential

main sheet, tree-straps and guy-lines unfurled

My idea of ideal hanging out  usually revolves around a hammock.  I'm very fond of them. They're my preferred camping option in a variety of settings and I've amassed quite a collection of them, from the massive  Hummingbird family hammock to the versitile Sierra Madre nube tent family of hammocks and accessories  to the unconventional lines of the hooded Go! outfitters  hammock tent and the inspired Tensile style sky-tents all the way to the classic lines of the Eagles Nest Outfitters hammock.

So, it takes something a little different to catch my eye in new hammock design. The kind of design seen in the Treeo. You may remember I did a Wish-lust piece on the Treeo a while back, well, it finally arrived and I eventually got around to testing it out. Designed with the outdoors in mind, the designers wanted to create a product that could be utilized by anyone, anywhere:

Easy set-up made easier with extra hands

From the avid adventure seeker to the family who spends summer nights at the park, the simplified design can be taken full advantage of with it's 3-in-1 capabilities. From hammock to ground sheet to rain fly within seconds (minutes, realistically), the Treeo is like the Swiss Army Knife of hammocks.


The real magic behind the Treeo is the Quick Draw Cord System found at either end (inspired by the simple draw-string backpack). By pulling the cords tight on each end, it creates the hammock function which then attaches to the tree strap and carabiner. The heavy Blaze Orange paracord of the draw-cord adds other slinging options too, depending on the space you have at hand.

By slinging the guy lines up high you can hang the Treeo above your encampment to provide shade from the sun or shelter from rain. And finally, by pulling the cords apart and staking each corner down, the Treeo can be used as a beach blanket or ground cloth. Made from Ripstop Nylon Material known for being lightweight, durable, and waterproof thanks to its PU 2000 coating. It features triple-stitched & taped seams preventing any rips or tears. The heavy paracord style drawstrings are made from single length of looped to enable it to be tightened from both corners of each end simultaneously.

accessories in a zippered side pocket

Doing so gathers up the corners and the short edges 213cm (7') to bundle into a hammock. The generous 274cm (9') long edge makes for a large hammock. The drawstrings then becomes part of the suspension rig. The double thickness 198cm (6.5') webbing 6.5' tree straps  are wide enough to be grippy to tree-bark without being bulky. They feature 8 loops sewn in at the working end with heavy bartacking to make very stiff and secure points to feed the included carabiners.

bomb-proof webbing loops for optimal hang adjustment

The webbing has a triple line of bright green trace threads run through it which helps identify twists in the webbing when setting it up. Twists in webbing reduce the stability of the loop against the surface it is holding onto and reduce the overall strength of the webbing to support the load (you). The webbing also has a eye-loop at end of its length to facilitate forming a knotless loop for hanging the hammock by feeding it through itself. The included steel carabiners slip neatly into these loops and take the drawstrings ably to ensure a very secure attachment.

The combination of the long drawstrings, long webbing and the overall length of the hammock makes for a long span that can be bridged by this system, shorter distances are easily managed by adjusting the point at which the webbing and drawstrings are connected.

snug as a bug in a rug. deep sides to snuggle under

The four corners and the midpoint of the long edge feature well sewn-in webbing loops to be used as anchor points and tie-down points when used as a cover sheet or ground sheet. Four hefty aluminium tent-pegs and a bundle of guy-rope with slider tensioners are included to make staking out or stringing up as a shelter very easy.
When in hammock mode, the corners are all drawn in tight so aren’t really usable but the midline loops are and could be used as gear hangers or stabilising tie-points if desired. The attached stuff-sack, (sewn into the mid point) also affords gear-storage, by putting a draw-string closing bag with a zipperaeble side-pocket. The pegs and guy-ropes all stow away neatly In that zippered side pocket when not in use.

When packed down in its stuff-sack the system packs down to a mere 28cm x 23cm (11" x 9") and weighs only 1.3kg (2.8 lbs)

solid stitching and impeccable finishing

As a hammock, the ample expanse of fabric used affords a comfortable hang. Even with is classic “banana” shape, the broad sides allows a good spread and stretch in its folds. The PU coated fabric was smooth and whilst not breathable, it also cut the wind nicely, adding to the comfort on a cool windy day whilst testing it. I chose to lay on the uncoated side to avoid the “laying on plastic” feeling and was happy. The triple-stitched and taped seams held weight nicely and gave no impression of stretching . The Treeo certainly catches the wind, so staking out when used as a ground sheet is crucial. I suspect that when used as a rainfly, care will need to be taken ensure sufficient tension is maintained to avoid rain collecting in pools, nor the sheet blowing around negating cover.

well placed stuff sack for slung gear stowage

One thing I noted was the tie-down loops are not placed such that the Treeo can be used as a hootchie tent without some additional work. A couple of extra loops of webbing would suffice and I may look into setting this up myself. It’s certainly good size for it and that PU coating will make it excellent at shedding rain.

included accessories from the zippered side pocket

as a ground sheet it is Tactical Baby approved

lots of leg room for lanky bloggers

a comfortable and supportive hang for supervising playground antics

Fourth mode: improv sail for kayak adventures?

Review: Tensile style Skytent

I love tents and I love hammocks, and I've expressed a desire for one of the Tentsile aerial tents for a long time, but they are quite expensive. Not wanting to miss out forever, I kept an eye out and checked out AliExpress, where real things go to be replicated. For Giftmas I bought myself the one-person equivalent. I always feel a bit bad buying knock-offs but at the very least, its getting the very innovative concept out there.

So, given my ongoing stroke recovery and my work situation, we haven't ben able to go away camping, so I hadn't been able to tryout my aerial tent. Australia Day came around and we were invited to BBQ in a park, sounded like the perfect opportunity to try it out. I took some extra webbing strapping, in case we had trouble finding tree's to sling it on, but as it turned out the picnic table we picked was close to three gum trees. I unrolled the skytent from its stuff-sack bag and took stock.

The contents included the triangular base, made from webbing reinforced ripstop with a low (70D) Cordura number and (high quality silicon coating to give it a waterproof index of 2000-3000 mm) the base, which is about 4m a side, had built in reinforced eyelets for the two sets of shock-cord threaded anodised aluminium alloy poles and a light, waterproofed (to 1500-2000 mm)fly sheet to connect to.

It also came with three sets of 6m (19') loop-ended webbing, and shackles to for it to the base. At one end a ratcheting system for increasing the tension was supplied.

The base triangle comes with a breathable B3 bug-screen net with twin zippers. Built into the "roof" are two sleeves to feed the poles through to keep the roof in place and add stability when setting it up and to drape the fly over.

Once set up, which took a bit of doing (pro-tip; set the tent part up on the ground in the middle of your space, then string your straps. I rigged my straps with a truckers hitch. Getting partial tension on the tent to set it at a good height was just matter of sliding the webbing up to the right height, one tree at a time and tightening the truckers hitches once they were even. PRO-TIP 2: get the three corners as evenly high as possible. this will stop you sliding "downhill" on the slick ripstop nylon.

Once set up, the remaining slack can be eaten up with the ratchet, but this takes some doing. I'm glad we weren't setting it up in the rain. Once fully tensioned which it really needs to be, we put the fly on, which  had nylon hook hardware and shock-cords. The 240D fly has a single up-and-down zipper which coupled with the wide door in the flyscreen, makes a nicely framed entry/exit and window when pegged back. with its attached toggles.

The interior is spacious, the 4m sided equilateral triangle provide  almost 7m². of floorspace, with 1.2m (the almost 4') of loft, with its quite steep sides, there is  a lot of real-estate.

The wide webbing reinforcements throughout the base distribute weight nicely. I'm 192cm (6'4") and weigh 90kg (200lbs).  Laying right down the middle, legs splayed to the bottom corners, I was very comfortably supported.

This skytent is rated to carry 400kg (880lbs) and the heavy-duty ratchets buckles have a staggering 2.5 ton minimum breaking strength. Even so, the makers recommend only stringing it at a maximum 1.2m / 4' from the ground. As a good rule of thumb, you shouldn't set a hammock up from higher than you would want to fall from. Or climb into.

The supporting poles that give the skytent its vertical structure are seated in these washer equipped eyelets, and with the shaped ends of the poles, they seat securely and remain in place even with the rambunctious efforts of Tactical Baby. The seams are all also all double stitched. The whole tent is well finished.  I had had worries about the quality, given it was a knock-off, but it's been well made and put together.

All packed down, the tent weighs3.0kg or so, including the included webbing and the ratchet. and packs down into a stuff sack measuring 50cm x 20cm x 20cm. It's not too bulky nor heavy and would make an excellent addition to a backpack for a camping trip.

Internally as I've said it is spacious, but good set-up is key. if any one point of the triangle is higher or lower than the others the effect is a slow and steady slide to the lowest point.

I took it camping off to a full-emersion live action roleplaying weekend, "After The Fall" .

So I found myself three trees and set myself up. As with most tents, second time was much quicker and easier, and i'd had my lessons learned from my first attempt so it was pretty quick.  I even slung a second hammock along side, for lounging in when I was in my full tyre-armour kit. TO somewhat disguise the bright green of my tent and its fly sheet  I draped the whole thing in some scrim. One thing I didn't want was anyone tripping and falling onto me as I slept, so I put it a little higher than previously.

So high in fact I needed to step up onto one of my tactical milk-crates that I pack my camping gear into. I also stowed my kit under the hammock, off to one side from the Skytent, in case I did have a fall.

Inside at one of the three apexes was a pocket system which worked quite nicely with a jumper stuffed in it as a pillow. I used the zipper as an attachment point for my night-light as there weren't any internal loop hangers.


All in all I am both impressed by and happy with my SkyTent, and would heartily recommend you al lgo check out the original design at TENTSILE - Stingray

After an afternoons romping by Tactical Baby, and perhaps more roughhousing than was necessary, one of the poles has been warped and now adds an uneven curve to the dome, but no real issue there.  Certainly no fault in manufacture. I've managed to straighten it out a little but eventually  I might either replace it or run it through a pipe bender in reverse.

The Skytent handled nicely when occupied by two. even if one was little and bouncy and the other big and lumpy. Alas, I haven't tried it with two adults, but they are rated for it.

I put  a yoga mat in it when I camped, just as insulation, it was plenty comfortable to lay in in warm weather but any breeze below will chill you right down. Setting up an under-quilt like those made by the Go-Outfitters would work  a treat, but you'd need a triangular one.   

One thing I found was that the fly lifted and flapped about a bit, so I lashed it down underneath with some handy paracord.


All in all and excellent product and not just a gimmicky concept. all the benefits of a hammock and tent combined.


Pro-tip #3: set your doorway at chest height if you-re expecting friends to pop by. Nicer conversations for everyone when you can be eye-to-eye.

Review: Grey Ghost Gear - 6x8 Utility Pouch

I took a bunch of Grey Ghost Gear pouches out for a hike up the easy daytrip, but possibly haunted Hanging Rock State Park, with my family, I wore pouches which I fitted out with a variety of hiking goods, in order to carry whatever needfulls I might have needed on the trip.

The pouches were filled with a variety of hiking goods, whatever I might have needed on the trip. One pouch I used was the 6×8 Utility Pouch .

The 6x8 Utility Pouch is designed to hold a variety of items, from medical supplies, a 1 quart GI canteen, Nalgene bottle, or other miscellaneous items. I put a 1L Nalgene in mine, as I wanted to stay hydrated on my hike up and down, as well as any clambering I'd be doing.  Up and down rockfaces, into ravines and meandering through the alpine bush.

Read the rest of the review here on Breach Bang & Clear: 






The pouch held up pretty well on my trip, and since, although I found that the 1L Nalgene bottle was a snug fit, and made for a tight zippering, which meant that a couple of times if I didn't zip it up tight it came loose, but I caught it before I lost my bottle. A 1 quart canteen fit easily enough, but I wanted more capacity than that.

Thanks to Anthony for the photography! You'll be seeing more of his work in this series...

Review: Fishbones - Carry-all hook

Here is an interesting piece of kit that came from the same minds as the Gravity Hook, and Fishbones, Piranhas gear ties. It's the kind of thing that I would probably make for myself if I had a metalwork workshop myself, where Brent & Eldrick Garcia of Out-Tek, LLC saw a need, and made something to fit the need.  This is the Carry-All.

Basically, Brent didn’t want to see his guitar constantly getting knocked over. So he made this thing. It’s basically a stainless steel hanger that can be fitted with either a length of nylon webbing or paracord.

Massively over-engineered, it is way stronger than it needs be, and that opens it up to my favourite kind of gear. Rugged, multifunctional and simple.

The body of the Carry-All is cut from a single piece of 3/16" stainless steel, the main hook opening is based around a 4cm (1.6") radius opening, much like a regular coat-hanger hook, and certainly wide enough to loop over all manner of pipes, racks, ledges and branches.

There is a finger grip section much like on a trench knife, with has a 2.5cm (1.0") radius opening, which is plenty of room for even a gloved finger, and there is enough room for two fingers, and along with the back side thumb-riser "guard" allows for a very secure grip which in turns allows for a quite comfortable hold-point for using the Carry-All as a carry-handle.

It isn't climbing rated, and Brent only mentions holding up to 45kg (100lbs) but I suspect you could carry more than would be comfortable before it breaks.


Designed to primarily take 1" webbing, the Carry-All has two sets of twin webbing slots, one narrower, one wider. These enable you to friction lick the webbing easily, as well as doubling the feed over to ensure a really secure lock. Looping both ends of the webbing through the eyes forms a webbing loop that can then be used for the Carry-All's primary purpose, to grab and hang awkward, unusually shaped and odd pieces of kit, be they the neck's of guitars, a pole to form hangers, or any other sort of webbing strapable item, which could do wit ha hook to attach it to a suspension point.

So hang your awkward stuff up to 100 pounds. I would like you to have one too.

With an overall length 12.5cm (5") and 7cm (2.8") wide, the 3/16" stainless steel is hefty and as sturdy as you could want, whilst still being essentially pocket-sized. The 18" 1" webbing supplied could be swapped out with any other 1" webbing, but as well as this, there are three paracod sized holes drilled into the base of the hook to facilitate stringing it with paracord instead.

It seems a odd piece of gear, it served a particular role, but also with a whole bunch of new options available for hanging, strapping and suspending, especially if traveling and you want to keep a bag of wet ground, for example. The balance points are well placed, and the stonewashed finish is easy on webbing and paracord alike.

I also envisage using these for picking up cast-iron pots from firepits, carrying twine-bundled loads of kindling, and stringing guy-lines for tarps.

Review: Gearlex Ear Clip

I wanted to upgrade my accessory carrying capacity without adding my weight, or adding to my magnetic signature. (I rarely go through metal detectors, but whenever I do, it's a bigger and bigger pain each time). I use ITW Grimloc's on a bunch of my bags and harnesses, which are good, but have a "pop-open" thresh-hold that I have had come open at inopportune times.  

I saw that Hornest SG was stocking a bioplastic carabiner that looked to be suiting my needs. These are the Gearlex Ear Carabiners.  These weather and chemical resistant clips are made from 62% renewable materials and ends up being 15% lighter than nylon materials and are reported to retain that toughness down to  -60oC, in case you are intending to go yomping in Vladivostok or Mawson Station.

At the broad top of the "ear" shapes, the clips feature a 1" webbing loop, with a split notch for feeding it into the location of your choice. 

Unlike the webing notch of the of the Grimloc, the Gearlex webbing loop is on the outside of the carabiner, not the inside. This frees up the internal area of the carabiner to give more space for attached objects, and adds freedom of movement. 

However, it makes me worry about how much of a load the clip can take. The large Ear clips are rated to a max of 78kg and the small to 60kg, which is vastly more than the Grimloc's 36kg break-point. I rather empirically tested it manually by pulling it looped through my webbing , and it held in place to the point of hurting my hand and with the stitching straining.

The gate of the carabiner is fitted with a dovetail locking mechanism which adds to the strength of the gate and is one of several locks now standard throughout the climbing world.  The inside, weight bearing rim of the carabiner is thicker, to distribute the load, but the back edges have a broad rib for stability and strength, without adding too much mass. 

The carabiners are clearly not climbing rated, and come with warnings not to be "load-bearing" but that said, for the strapping of accessories, like water bottles, dummy cords or even strapping on smaller packs to bigger packs, such as the Hill People Gear Runner's Bag, or the Zulu Nylon Gear CAOS admin pack or even perhaps a daypack, for those of us who pack like we're about to jump out of a perfectly good airplane.  

Gearlex produce these in Black, Coyote and Ranger Green, and I got one of the clips in black, one in ranger green and a small one in Ranger Green as well, to give me some options when I am setting them up and using them, to match or contrast the gear they are attached to.


Not as hardy and load-bearing as an aluminium or steel climbing carabiner, bigger and more stable than a Grimloc, the Gearlex Ear Clips fill the niche between a light accessory clip and a heavy-duty carabiner.

Both have their places and uses, but for something in-between, you might find that the Gearlex clips, in big and small suits your needs.