Review: Gearlex Ear Clip

I wanted to upgrade my accessory carrying capacity without adding my weight, or adding to my magnetic signature. (I rarely go through metal detectors, but whenever I do, it's a bigger and bigger pain each time). I use ITW Grimloc's on a bunch of my bags and harnesses, which are good, but have a "pop-open" thresh-hold that I have had come open at inopportune times.  

I saw that Hornest SG was stocking a bioplastic carabiner that looked to be suiting my needs. These are the Gearlex Ear Carabiners.  These weather and chemical resistant clips are made from 62% renewable materials and ends up being 15% lighter than nylon materials and are reported to retain that toughness down to  -60oC, in case you are intending to go yomping in Vladivostok or Mawson Station.

At the broad top of the "ear" shapes, the clips feature a 1" webbing loop, with a split notch for feeding it into the location of your choice. 

Unlike the webing notch of the of the Grimloc, the Gearlex webbing loop is on the outside of the carabiner, not the inside. This frees up the internal area of the carabiner to give more space for attached objects, and adds freedom of movement. 

However, it makes me worry about how much of a load the clip can take. The large Ear clips are rated to a max of 78kg and the small to 60kg, which is vastly more than the Grimloc's 36kg break-point. I rather empirically tested it manually by pulling it looped through my webbing , and it held in place to the point of hurting my hand and with the stitching straining.

The gate of the carabiner is fitted with a dovetail locking mechanism which adds to the strength of the gate and is one of several locks now standard throughout the climbing world.  The inside, weight bearing rim of the carabiner is thicker, to distribute the load, but the back edges have a broad rib for stability and strength, without adding too much mass. 

The carabiners are clearly not climbing rated, and come with warnings not to be "load-bearing" but that said, for the strapping of accessories, like water bottles, dummy cords or even strapping on smaller packs to bigger packs, such as the Hill People Gear Runner's Bag, or the Zulu Nylon Gear CAOS admin pack or even perhaps a daypack, for those of us who pack like we're about to jump out of a perfectly good airplane.  

Gearlex produce these in Black, Coyote and Ranger Green, and I got one of the clips in black, one in ranger green and a small one in Ranger Green as well, to give me some options when I am setting them up and using them, to match or contrast the gear they are attached to.


Not as hardy and load-bearing as an aluminium or steel climbing carabiner, bigger and more stable than a Grimloc, the Gearlex Ear Clips fill the niche between a light accessory clip and a heavy-duty carabiner.

Both have their places and uses, but for something in-between, you might find that the Gearlex clips, in big and small suits your needs.

Review: Mystery Ranch - Removable Stick-it

I got in touch with my mate Tay Choon Mong at Hornest Singapore, my favourite stockist of the hardy and heavy-duty Mystery Ranch packs and products, after I saw that they had some accessories I had been hanging out for come in. You may recall I have one of the rare Mystery ranch "Asia Pacific only" 1 Day Assault Pack bags, which is a cross between the more mature 3 Day Assault Pack and the more recently released ASAP Pack.

I also have one of the Cinch straps, for comfortable wear and quick release of a pack whilst wearing a loaded plate carrier.

Great kit. The particular accessory that had come to my attention was the Removable Stick-It flap, seen here in Coyote, mounted to my black 1DAP. The Stick-It is a detachable beaver-tail that mounts to the bottom of a compatible pack to offer external storage when you've either gotten too much stuff, or just something too big for your pack to carry.

Built with 500D Cordura for long-haul durability, which I've come to expect from pack-makers, and fitted with mil-spec 1" webbing straps, Mystery Ranch have gone all out on the both the construction and the hardware. The buckles have a clip-in end, for fixing to MOLLE loops or other webbing on your pack, as well as a spring loaded friction lock for the working end of the buckle.

This kind of attention to detail as well as using better-than-standard fittings is something I love about Mystery Ranch. You pay for it, but it's worth it. The Stick-It attaches to its host pack with four press-stud closing loops of webbing, which feed back into the accessory by extra loops of MOLLE style webbing sewn into the Stick-It's interior. Those press-stud loops allow you to attach it to the bottom of any pack with MOLLE on its base.

I've put it on my Platatac Light Field Pack in place of its "Office" Admin Pack, or in fact as well as it. It also fits the Propper UC Pack, and the old standby the classic Platatac Bullock Echo, though the Echo already has a beaver-tail attachment built in.

The Stick-It has a couple of other interesting features. It is constructed to have expanding baffles in its Center line, in case of very bulky loads, with plastic inserts to stiffen the sides and carry the weight more evenly. You can really fit quite a lot into this, and is is the smaller of the two sizes offered. It also had a set of drainage grommets in its base, for those times you've taken a dip or been caught in a monsoon.

Another very forward thinking feature is the sheer length of the webbing for the attachment straps. This both lets you place the buckles anywhere from right at the back of the pack, to all the way at the front for quick release options of your over-load without shucking the pack propper. They also come with hook-and-loop keeper loops, to bundle the excess webbing up tight and out of the way for snag free utility.

The small Stick-It is perfect for stowing bulky times, like an Ops-Core bump helmet, a bundled jacket like the  Platatac Harry 1.2 Softshell or the like. It can easily cope with even larger items, as long as you're comfortable with the, sitting out over the top of its top lip. The construction is hefty, and I suspect the weakest point would be the clip on the buckle. I've never had any trouble carrying my every-day items, let me know if any of you try lugging a ammo-can with yours.

The Stick-It isn't usually available as a stand alone item, but can be found in the Mystery Ranch Gunfighter pack, or through Hornest.

Review: Mystery Ranch - 1Day Assault Pack

I put in just one request this Giftmas past, I saw on a Facebook group I am on (hey all you Secret Ranch folks!) one of the very limited, Singapore only release of a day pack from the inestimable Mystery Ranch. The good folks at Mystery Ranch, who have been putting together packs for Military, Fire and Rescue, Backpack Hunting and Mountaineering for 30 years, and I've been lusting after them.

I have a piece of Mystery Ranch kit already, the very cool Cinch Strap, which enables you to fit a pack over the top of a plate carriers shoulder straps and release it quickly as needed. That's the kind of forward thinking that they put into their products.

The Asia only release of this design is available through Hornest. It is very similar in design to the newly released ASAP Pack, and the more mature 3 Day Assault Pack.  This however is the Mystery Ranch 1 Day Assault Pack.

This 18.2L (1110 cu inch) pack features the iconic Mystery Ranch 3-way Y-zip which drew me to their packs in the first place, and weighs in at roughly 1.2kg (2lb 12oz) due in no small part to the tightly woven, water resistance treated 500d Cordura that makes up its walls. The bottoms of the pack is double layered and the inner layer is reported to be cut 1/2" smaller than the outer layer, placing the bulk of the load's weight on that inner layer, leaving the outer unstressed. Brilliant design.

The 1DAP is a smaller 3-zip pack with multiple pockets internally and externally. I have previously very much enjoyed the smaller packs I've used as my daily carry, with the much beloved Platatac Bullock Echo being the logical progression from my Crumpler Messenger Bag, and the MR 1DAP is a fitting successor to both of those, and my more recent every day carry bag, the rugged Propper Gen Multipurpose satchel bag. I wanted to be able to carry a bunch of my usual preparedness kit, without wanting to draw too much attention to myself, so I jumped at the chance for a "regular guy" black option, over my more usual khaki, this time.


The 1DAP features 3 rows of 3 channel PALS/MOLLE on both of the top sides, as twin 6 loop daisy-chain strips of loops running down the front of the pack. These are perfect for attaching lights, attaching carabiners, looping cord or what have you.

All the external facing zippers are reversed, and tape covered, to resist water and dust intrusion. The long stem of the Y of the zip extends from the very base of the pack all the way into three inches into body of the pack. The two arms of the Y zip all the way to the back of the pack, and each can be opened independently, to use as a flap lid for the top, a side entrance for just a hand, or opening all three, filleting the pack, for full access.



It offers several hydration configuration options, internally, there is a loop of cord at the very top of the inside of the pack for attaching a hydration bladder like the Source Storm WXP or the Platapus PIB, but more than just an attachment point, the 1DAP zippered access ports at the top corners of the pack (with some of my safety-orange paracord threaded through, to demonstrate here). Those zippers tuck well out of the way when not in use, shielded by the same reverse-cover design as the main body zippers, keeping rain and crud out.

The pale internal sleeve is made up of a backing, sewn into the top seam of the pack, and is open on the sides, with just two webbing anchors about 3/4 of the way down. This gives the internals of the pack some freedom of movement, without sacrificing stability. This allows larger items to be slipped under the front, cables and even additional hydration bladders to be fitted.

The internal sleeve also features a deep drawstring closure pocket, which can accommodate a variety of large items, like the 2L version of the Pathopak, which are 125x170mm, with ease. This is a great place to stow a hydration bladder, keeping its potential condensation off the rest of your kit, I also use it to secure larger items I don't want bouncing about the pack, or even my lunch. You could also use it as the base-cap of a longer item held secure by the drawstring, and projecting out of the top of the pack.

There are two mesh sided utility pockets with zippers against the bottom of the drawstring pocket of the sleeve, which are very useful as the rest of the packs internals are free from attachment points. Nowhere to attach pouches, which is a drawback, but the upside is that there is a lot of room to store larger items. The fact the internal sleeve is not fully attached also means you can shove it up, and out of the way, and place broader items at the base of the pack, and adjust for weight without crowding.

The top of the pack features a very clever, reverse opening and horseshoe shapes top pocket, as well as a broad patch of loop field, to attach patches and name tapes. Inside, a spacious main area, with a mesh-lining at the bottom allows storage of a variety of items. I keep a spare cap, and goggles, and a LazerBrite light in mine. The "top" of the lid features a zippered pocket, where I keep first aid kid, some gloves, a haemostat kit and the like. You may have noticed that at the tops and bottoms of each of the zipper runs, and lines of webbing, there is a loop, primarily for assisting a grip and unzip.

This is another example of the forward thinking put into the design of these bags. Another aspect, is the Futura Yoke system of shoulder straps and attachments, which allow for some really clever adjustment options.

The contoured padded components, with some built in webbing loops (you can see I've put a ITW GrimLOC on my left strap) and a pectoral strap, to secure the pack whilst you're on the bounce. These are nicely done, but pretty standard, there are tri-glide buckles with webbing feeding through from the back of the pack to the shoulder straps, and these play a really key role in adjusting the pack.

As well as the air-mesh backing of the pack, it has a built in semi-rigid packing behind that, which is how the pack manages its rather exciting transformation.

Fiberforge, a thermoplastics company Mystery Ranch has partnered with, builds their Framesheet Adjusters. These adjusters are a thermoplastic composite material created by fusing fiberglass with recycled softdrink bottles. The resulting material is apparently 60% lighter and 600% stiffer than steel, and 30% lighter than aluminium. This plate matches another one that sits inside the pack at the bottom, forming lizard like scales that give the pack a really good feel to wear. No jabs form hard-edged kit in the pack. It curves to match the natural inclines of the back, and sits nicely in the lumber region.

The back section of the pack can expand from around 40cm (16") to a whopping 60cm (22") because of the top of the back part of the pack is actually a loop backed insert,and a matching hook-field within the pack body itself. I had some trouble getting this quite right, as the broad sheets of hook and corresponding loop were only too happy to lock tight, but I managed to shoe-horn it into the best fit for me too.

This 40cm (16") part, which houses the Fiberforge insert, can be moved up and down, allowing the wearer to customise the placement of the pack, and by adjusting the webbing held by the tri-glide sliders on the shoulder straps, the perfect fit is easy to maintain.

This fits in with Mystery Ranch's resolve to solve the problem of packs not fitting properly over body armor because of the increase in relative torso size wearing armor creates. Being able to adjust the harnessing to account for this increase in size greatly enhances the stability and comfort of the pack when wearing armor.

Couple this with their Cinch Strap, and you have a pack system that will suit any body type, in or out of full kit.

I'm a chronic over-packer, so having a small capacity pack, with only two 3x3 PALS/MOLLE fields is part of my 12 step recovery process, but I like to think I am achieving my goals of remaining Equipped, without being someone who gets train services halted. I have put a few pouches on the outside of the pack, and I'm adjusting my load out in those, ad well as internally. One thing Ive noted is that even the "wings" where the shoulder straps meet the pack are padded, its a delight to wear as a result of these little thoughts, and whilst nothing from Mystery Ranch is cheep, they are made to be effective, and last.

I've found I really like the narrow silhouette of this design, being long and tall, it avoids the over-hang that other packs have given me, meaning I'm right and ready to duck and weave, getting in and out of where I need to go, be that in a busy laboratory, a crowded train, droid evasion in ventilation shafts or long forgotten command bunkers. 

Review: Original SOE Gear - Combat Cock

Awaiting me when I got home recently was a package from Tay of Hornest, Singapore. Tay and I have worked together looking at some cool kit previously, like the Helinox Packable folding chair, the Jil Lite UV light and the Jil Lite Constel LED lantern as well as a bunch of other cool things.

This most recent item is a lot of fun, just for fun. It's time to rock out with my cock out, behold, the SOEGear Combat Cock.

Crafted from 1000d cordura nylon, the Combat Cock is fitted with a length of 1" webbing and a tri-glide buckle under the tail-feathers to facilitate attachment to any number of items.

Each flank of the Cock is fitted with a 75mm x 50mm (3" x 2") colour-matched loop field for attaching your favorite patches, I've thrown on one of my also-new MOTUS/Hornest exclusive patches.

With drainage grommets for eyes, and a hook-and-loop opening on the underside to access the stuffing, for either re-fluffing, or replacing it with what-have-you. It could make an innocuous stuff-sack for secret needfuls, even SERE gear.

I've been thinking about stuffing mine with a Headover to give it double duty as a fun accessory, storage as well as an impromptu travel pillow.

I really like this little guy, and look forwards to photo-bombing a bunch of things, places and events with my khaki Combat Cock! Get yours now, we'll see who's has been more places ...

Review: Jil Lite - Jenyx UV torch

My friend Tay from Hornest tipped me off that he was getting a new light from Jil Lite coming into his shop, and being the luxophile that I am I jumped at the opportunity to pick one up. The reason I was so keen on this particular one, was that it was a UV emitter.

I have a UV laser pointer (from LazerShirts.com) which is pretty damn cool, but there are times when having a wide spread of UV light can be very useful for identifying a variety of materials as well as spotting scorpions, hidden UV ink messages and giving a low-impact tracking tool if you have the right markers... More on that later.

The Jenyx UV light from Jil Lite features a 2-chip controlled LED emitter producing 80 Lumens at 400nm. The light is powered by a single AA battery, and has a reported burn-time of 3 hours, with a constant brightness control circuit built in to ensure a steady beam.

The light distribution is quite good, with a room filling "orange-peel" aluminium reflector, behind the B270 optical glass AR coated on both sides lens. The entire unit is housed ay 6061 aircraft aluminium, giving a very sturdy little package. Activation is by tail-cap clicky button, which is inset below the butt-end of the housing, with a lanyard hole built in. Water resistance is achieved with o-rings, but the model is not dive-rated.I like the removable steel pocket clip as well, always good to have that as option.

 I was able to take some pictures with my iPhone  and was very happy with the intensity and reach of the light, illuminating my rather staggering NERF collection, as well as the "Toxic Green" handles of my KA-BAR Zombie Killer knives . UV lights are also very powerful chargers of glow-in-the-dark items such as Ranger Eyes and my SAR Moon Glow disk. It also picked out the green paracord that shipped with my Fishbones and Piranhas  as well as the orange paracord I use as well.

UV ink such as found in highlighters, or in anti-counterfeiting can act as a tracking or messaging system. UV reactive paracord or even NERF darts can act as inexpensive "breadcrumbs" to mark a trail, an alternative to IR or other "your-eyes-only" methods.

This is a cool little torch, and I'm enjoying having it on hand to charge my glowies, and to spot new UV reactive materials I come across in my adventures.

Review: Civilian Labs - Hazard4 - Loader RG Harness

Ages ago I covered an essential piece of my EDC, my custom made EDC holster harness. This faithful piece has been with me for years, and has reached the end of its life. I had contacted Darrin Talbott of Extreme Gear Labs to commission him to build me something, but alas, he's just far too busy to make a wacky one-off custom job for a blogger.

Check out his Facebook to see the cool Operator gear he makes. That news sent me looking for an alternative.

I was lucky enough to spy the Jerking The Trigger post on the Hazard4 Poncho and following the links, saw that Hazard4 offered a modular holster rig! Tay from HorNest did me a solid, and shipped some over.

Hazard4 are the "Tactical" arm of Civilian Lab makers of fine modular kit. The link I followed brought me to these, this is the Loader rig
with the optional extra anatomic harness.

What it is is two sets of the Escape Rig, one for each side. The two halves are identical, so I'll cover them as just the single unit.

Here are the two Escape halves, with the Anatomic shoulder harness, and another piece at the bottom to hold them together for stability.

The pouches are made of Dobby Nylon and have "PU X 2" treatment, and measure 12.5 x18 x4 cm
(~5" x7" x1.5") externally. The main panel is faced with two hook and loop closing pockets, one that fits my Surefire 6PX like a glove, and the other which his more squat. Both of these pockets are elastic sided, and open cornered. Bear this in mind when looking to fill them.

In this shot you can see some of the rotating buckles  that are fitted to each corner, each backed with a tab of the same padded material that backs the pouch for wearer comfort.  This is some very thoughtful and innovative design. no more buckle-pinch!

You can also see one of the tri-glide buckles that sit on the middle of each of the four sides. These are for accessory loop and strapping, and I'll get into that a bit later.

The 2013 version of this pouch has all black labeling and non-reflective zippers and fittings, for even lower profile wear.



The "back pocket" of the pouch is an open slot, wide enough for my receipt and card filled wallet, and is mesh-sided to cut weight and improve breathability and drainage. (Luckily Australian money is plastic, in case I ever take a dunk...) You can see another of those elastic-looped tri-glides here, to which I have dummy-corded my wallet. No more dropping it into the toilet, off piers, or leaving it on cafe counters for me!

My iPhone sits in the corresponding other side.

What you cant see is the wide swathe of black loop field, for affixing a hook-backed holster, like the Stick-Up.

You can also see the double zipper here of the inner pocket. Very useful!

Inside that inner pocket, you see where some real thought has gone into making these pouches. As well as the tough nylon outer, they are lined with quilted micro-suede

They also feature a series of webbing and elastic channels to fit your tools and needful gear, I have my SAR Dead Ringer comb and CRKT K.I.S.S. folder in mine on this side. Passports, and paperwork on the other side.

The pocket opens all the way to the bottom, but, like a good admin pouch, it has webbing retainers, keeping it from flopping flat, but catching it at about 45o so your pens, USB sticks, or whatever don't tumble off into the wide blue yonder.

The back pocket has a press stud on webbing closure, with two sizing options, which is great. I tend to clip my wallet in with the big, and my phone in with the snugger length.

The back of the pouch features a belt loop,wide enough for all the belt I tried it on ( both my 5-11 TDU belts, the 215Gear Ultimate Riggers belt, and the PM Leather Hobble Belt.

It also features a press-stud flap option, for quick-release needs.

Why even have a belt loop? Modularity!

 Those corner buckles attach to the included cross-straps, which are two fully adjustable nylon webbing straps, with a press-stud in the middle, to connect the two.

One of the coolest things about this whole system is that it can be worn so many ways.

All of the straps will "double-back" through the buckles for a really secure fit.and the tri-glide attachment points allow you to rig any number of stability or alternative attachment options. The rotating corner clasps mean that the straps stay flat no matter what configuration you wear them in, and they stay upright as you move, depending on how you wear it.

The included cross-straps are a little more versatile than the Anatomic straps, but not nearly as comfortable. The pouches can be worn under the arms, holster style, singly or in pairs, horizontally or vertically, but also on the hips on a sling, as a backpack, slung cross-ways like a bandoleer, on the thigh as a drop-leg or on the front of the chest or even as a shoulder bag.

I used one of the cross-straps to act as a kidney-height stabiliser,  having found that on their own, the pouches slid forwards when i bent over without them.

 Here's the package insert, showing some of the carry options.....


One last thing. Each of the pouches comes with a "Shuttle Pouch" which is made from the same Dobby Nylon, and lined again in the quilted micro-suede with mesh pockets along with nylon strapping. The Shuttle pouch is designed to fit into the "Back pocket" of the main pouch,and be clipped in. It features waterproof zippers and a set of webbing eyelets on each of the four back corners for dummy-cording (mmm, dummy-cord: looks silly, keeps your gear on you...)


This was a seriously feature and function filled set of kit.

I've been wearing it now for a few weeks, getting the configuration and fit right and I must say, it has been one of my better EDC investments for some time.  I wear it every day, almost all day in some cases.

I don't feel "dressed" with out it, and it really is my go-to item when it's time to run out the door; be it emergency, fire, flood or groceries.

Review: Benchmade - SOCP CQB dagger

So, in my recent delivery from Tay at HorNest Singapore, I finally laid my paws on this piece that I first saw on 2Cent Tactical (or at least, the Spartan Arms CQB version) but primarily from the Soldier Systems write up of this one specifically, the Benchmade SOCP Close Quarter Battle dagger.   


Being a dagger, this is a restricted item in Victoria, where I live, but I hold an exemption of the Weapons Control Act as a bona fide collector.

I had held one in the past, when in the Platatac retail shop. Now I have one.

 This is a piece of delicate, singing steel. This is no kitchen knife. No camp knife for chopping branches and making kindling.  This is for putting the pain into people.

Both the dagger and the red skeletonized trainer blade are made of 440C blade steel. The dagger weighs 62.37g (2.20oz ) and the trainer 65.49g (2.31oz), with overall lengths of 18.42cm (7.25") and 17.30cm (6.81") and blade lengths of 8.18cm (3.22") and 7.06cm (2.78") respectively.


Worth noting that on the dagger, the actual sharp edge only accounts for a little over a third of that length but comes to a wickedly sharp point.

10ga phlebotomy needle sharp.

The tail end features a large ring, with crenelations cut into its cap for a very positive grip and the narrow spine is shaped to fit a tight grip, with further crenelations cut into the middle "knuckle gap"for added gripping power.



The trainer and the dagger have the exact same layout, and this makes a very nice and safe transition, over more traditional "training" blades. The safety-red trainer looks, feels and acts almost exactly the same as its more deadly sibling, allowing you to train like you fight, and fight like you train.

Just what is it for then? This blade was designed to be an on-hand backup for a firearm in close quarters fighting.


The narrow spine and ring-grip allows the wielder to maintain a grip on a firearm, be it a pistol or longarm, and have it on-hand to fend off attackers in grappling distance, without switching hands.


One can quite comfortably be carried whilst you are using your hands for other things (just TRY to take my lemonade away).

The idea behind this blade is that it is not a "fighting knife", but a "last-ditch" weapon to buy yourself time in a very dire situation. It is light, fast and very very good at putting holes in things that need ventilating in a "never touch me again" situation.

Being able to hold a knife and still hang operate another tool, or object simply gives you a time advantage over someone who needs to drop an item and draw a knife.

Part of the key to this is the design of the ring grip and how the sheath works. The injection molded sheath with retention clip and lanyard holes fits neatly into a MOLLE channel, taking up three rows, and is held snugly in place by the clip and the flared end of the sheath.

The placement of the lip pf the sheath and the ring means that you can hook the tip of a finger through it, yank it up and out and into a usable grip from just slapping your palm against it, and making a fist whilst drawing back. Its an unusual maneuver, and I am particularly glad that I got the trainer, because I can see myself giving my gear or self an impromptu shave practicing this.

The sheath is available in olive drab or black, and it really does blend in, as well as only adding 28.35g (1oz) to your load. This is a stealth piece if i ever saw one.

A beautiful, functional, dangerously stealthy piece. I really like it, and am very pleased to have added it to my collection, and in the event of the breakdown in society, I'll be very happy to have it in my arsenal.