Review: NiteIze - CamJam

I love cordage and carabiners, and always keep an eye out for new systems. One such was coming up in my social media feeds were the CamJam Cord Tightener from NiteIze Innovation. The device is simple enough. a High-Density plastic hook, with a sping-wire gated closure, a cord feed hole, and a built-in toothed cam for binding and locking the cord under tension.  This particular version of the Cam-Jam is suited to 1/16th' (2mm) to 3/16th" (5mm) cordage and its feed hole is sized to accommodate this.  It weighs only a slight 1.69oz (16.00g) and measures 2.70" (68.57mm) x 1.35" (34.30mm ) x 0.58" (15.34mm).  The cam is a tear-drop shaped piece of the same material as the rest of the clip. It has a hollow on the underside which friction lock onto a knob on the body of the clip. A tensioning bar at the rear of the clip fits into a ridge on the back of the cam, presses the cam into the body.

 

On the "back-side" of the clip where the cord feed hole (the "eye") comes out has a channel to guide the cord "downwards" away from the clip. this ensures the standing end of the cord is held in parallel with the cam. This, in turn, maintains pressure on the cam, reducing lateral slippage on the working end.  This is important as the teeth of the cam are not especially aggressive nor is the tensioning bar especially tight.

The CamJam works by having anchored cord fed through the hole and passed beside the cam where the hole is, the clip end can the be clipped onto whatever it's being fixed to. The working end of the cord can be pulled taught through the eye and "set" with the cam. 

NiteIze recommends fitting some kind of stopper-knot on the working end. and I think some kind of hitch on the bright is the best way to go, to prevent total failure, should the cam-slip. Which it does, quite a bit.

One thing I found was that the Cam Jam did assist in belaying the line in order for me to set a more secure knot in place, such as a hitch on a bight or a truckers hitch. The "eye " and feed channel feature are useful regardless of the reliability of the cam and the spring wire clip of the carabiner might be light-duty but the whole unit is. It's not climbing rated, which means you don't want to put your life on the line with it.  

Have a bundle of firewood to haul? have a tarp or tent fly to secure? This should do the job. Need to lash the escape ship to a pier? Get a heftier tool. 

The CamJam Cord Tightener features the strong plastic body of a carabiner combined with a locking cam mechanism for a knot-free way to tighten, tension, and secure light loads. The CamJam can be clipped to fixed anchor points and the cam mechanism will lock cord in place with the desired amount of tension.   There is a smaller version of the Cam Jam, the CamJam Mini is meant to be used with cord 1.8mm - 3mm. Which is to say, dummy cord, hootchie cord  and guy lines and only weighs 0.18oz | 5.00gand measuring only  a slight 1.75" (44.60mm)x 0.90" (22.63mm) x 0.37"(9.50mm) but smaller and lighter doesn't really equate to stronger and chunkier, though the smaller cam does bite quite well on the paracord.

Review: Gearlex Ear Clip

I wanted to upgrade my accessory carrying capacity without adding my weight, or adding to my magnetic signature. (I rarely go through metal detectors, but whenever I do, it's a bigger and bigger pain each time). I use ITW Grimloc's on a bunch of my bags and harnesses, which are good, but have a "pop-open" thresh-hold that I have had come open at inopportune times.  

I saw that Hornest SG was stocking a bioplastic carabiner that looked to be suiting my needs. These are the Gearlex Ear Carabiners.  These weather and chemical resistant clips are made from 62% renewable materials and ends up being 15% lighter than nylon materials and are reported to retain that toughness down to  -60oC, in case you are intending to go yomping in Vladivostok or Mawson Station.

At the broad top of the "ear" shapes, the clips feature a 1" webbing loop, with a split notch for feeding it into the location of your choice. 

Unlike the webing notch of the of the Grimloc, the Gearlex webbing loop is on the outside of the carabiner, not the inside. This frees up the internal area of the carabiner to give more space for attached objects, and adds freedom of movement. 

However, it makes me worry about how much of a load the clip can take. The large Ear clips are rated to a max of 78kg and the small to 60kg, which is vastly more than the Grimloc's 36kg break-point. I rather empirically tested it manually by pulling it looped through my webbing , and it held in place to the point of hurting my hand and with the stitching straining.

The gate of the carabiner is fitted with a dovetail locking mechanism which adds to the strength of the gate and is one of several locks now standard throughout the climbing world.  The inside, weight bearing rim of the carabiner is thicker, to distribute the load, but the back edges have a broad rib for stability and strength, without adding too much mass. 

The carabiners are clearly not climbing rated, and come with warnings not to be "load-bearing" but that said, for the strapping of accessories, like water bottles, dummy cords or even strapping on smaller packs to bigger packs, such as the Hill People Gear Runner's Bag, or the Zulu Nylon Gear CAOS admin pack or even perhaps a daypack, for those of us who pack like we're about to jump out of a perfectly good airplane.  

Gearlex produce these in Black, Coyote and Ranger Green, and I got one of the clips in black, one in ranger green and a small one in Ranger Green as well, to give me some options when I am setting them up and using them, to match or contrast the gear they are attached to.


Not as hardy and load-bearing as an aluminium or steel climbing carabiner, bigger and more stable than a Grimloc, the Gearlex Ear Clips fill the niche between a light accessory clip and a heavy-duty carabiner.

Both have their places and uses, but for something in-between, you might find that the Gearlex clips, in big and small suits your needs.

Review: First Tactical - Diamondback Tanto Knife

I had a package arrive from First Tactical with two items, their very fancy and vicious looking Medium Duty Light, and this very substantial folding blade, the Diamondback Knife in tanto tip.


I have a few folders in my collection, though I must say I prefer fixed blades, I keep a CRKT Folding K.I.S.S. in my EDC, and the very snappy Boker folding scalpel which lives secreted away in my every-day pack. I also have a bunch of the hefty and brutally built Boker Plus AK assisted folders, for the bug-out-jars I've been putting together for Tactical Coyote. So I was quite impressed when I got the Diamondback in hand.

Read the full review on Breach Bang & Clear ....

Review: McNett - Gruntline

The Gruntline - braided rubber goodness

As first seen on BreachBangClear. Inexpensive and useful they say, just like me!

Here's an unusual bit of kit that I've recently added to my regular load. I've covered a number of uses for paracord previously, and it's pretty ubiquitous in the preparedness world, but it lacks in some areas. It has very little give, over short lengths, but has a minimum 30% elasticity over long lengths

Usually for smaller elastic jobs
you could use shock-cord
but it's usually not up to big tasks in small diameter cords seen on gear. The usual alternative is to use the metal hook-ended bungee ocky-straps but these have a long history of being flying eye-ball gouging flails of doom.

The Gruntline - Boots, blades and baggies

The good folks at McNett have come up with a solution, the GruntLine. Consisting of braided natural dry rubber tubing, with cords affixed at either end which in turn end with plastic clip hooks. The line is 1.10m (43") long, all told but when stretched out, it will reach up to 2.15m (7'), when all played out.

The braiding gives you as many no-peg points where you can feed and bind up whatever you are wanting to hang. It's just a matter of feeding a part through the braid, and it will bind it up and hold it pretty tight.

The Gruntline - MOLLE storable

The Gruntline is rated for up to 9kg (20lbs) of gear, although the braid-feeding of any single items wont come near to bearing that load, (but when taut they hold tighter). It will hold as many items as you can fit it with, up to that weight limit. I don't know how well the cords are attached to the webbing, as they are secured under loops of rubber, so might be a potential weak point.

As well as acting as a clothesline, and a gear suspender the Gruntline could be put to any number of other uses. McNett also suggest it can be used as a lanyard, and gear retention, but also as a tie-down strap, pack strap. I have been keeping mine fed through three loops of PALS/MOLLE on the side of my pack, so I can have it on-hand wherever I go. They also suggest it could work as an emergency medical tool, for use as an arm sling, I.V. support and even as a tourniquet.

The Gruntline - wrap that hat and conceal your melon

You could also use it as a slingshot elastic, an animal snare and as a natural camouflage holder, much like the netting on a helmet or as part of a ghillie suit.

Those same braids that can be used to secure foliage and other materials to break up your silhouette and conceal yourself. It loops nicely around a hat, so should serve this use well. Even crisscrossed over a pack, or the like, it would give good purchase to attach your foliage coverage. The downsides of the GruntLine are only few; the plastic clips on the ends are pretty narrow, and don't open wide enough to clip over some of the points I tried to use, and there is always the worry that it might give out, or the cord used might give out. However, I've had no such trouble so far, and kept both my eyes, so there is that.

Review: RhinoRopework - MAD Stick

Image from RhinoRopework

Here is a brilliant bit of kit that I've managed to scoop up just in time for OCONUS Week on BreachBangClear, in a world exclusive.

I've been buying a few things from the Rhino Ropeworks, like their tritium equipped fobs, and just recently one of their Saber ropeworking spikes. When I heard that this weeks topic was things done by foreigners, by foreigners, I dropped my mate Shane a line, and he sent me a prototype in the mail!

Shane is no stranger to making tools that are up for some hard yakka, and I was only too happy to get RR's newest tool in my hands. Check out their Facebook page for all the latest work-in-progress.
The MAD Stick is a 400mm (15.7") long, 12.7 mm (0.50" yeah, fifty cal!) length of 4140 high tensile tool steel, commonly used in pry bars. It weighs in at 340g (12oz). Very lightweight for what it is.

The steel is heat treated to have a Rockwell 45-46 in the body, 60 at the breaker tip. That gives you all the flex you need for doing heavy prying tasks you might have on hand, without deforming the working ends.

The two different ends give you two different functionalities. The double sided chisel point comes to a second, finer edge for the last 2mm or so, giving a nice robust wedge to use to work into gaps and crevices without the fear of chipping your tip. The primary grind is about 3.5cm (1.5").
The opposite end is rounded to about the same length, and also features a primary and secondary grind. Good for all kinds of probing and hole punching.

This tool, as my partner Omega said "is a metal stick of great evil. I like it" (and she knows a thing or two about evil ...). To top it off, the whole piece is covered in a black Cerakote finish although RhinoRopework can also get it coated in a variety of colours.

The middle 5cm (2") of the bar is left smooth, but the rest of the surface is covered in a really bitey knurling. So bitey, in fact it is possible to use as a striker for Ferrocerium. Bloody brilliant.
I generally prefer a ridged finish personally, which as it happens, RhinoRopeworks can put on one of these instead of the knurling, but I have to say, it's a pretty aggressive grip. I had no feeling of this coming loose in my hands, or in fact where I stowed it.

This is helped along by the ripper little pen clip that is fixed to the MAD Stick, about half way.
That little clip meant that I was able to slip the stick down the side of my PALS/MOLLE equipped pack, and even clip it to my Hazard4 RG Harness, and wander around the city with it slung under my vest, along my torso.
That same portability would mean that this could be worn on a plate carrier, on an assaulters pack, or secured pretty much anywhere with a loop or lip.
I'm no stranger to breaking things, and would stack the MAD Stick up against my Stanley FUBAR, the Dead-On Superhammer and the CountyComm Breacher Bar happily. They are all different tools, and this is no hammer, but it sure is a problem solver.

Shane tells me that the MAD Stick was "inspired by digging tool used by foragers and the splitter bar used in AMC's The Walking Dead to kill walkers through the fence". Now, this isn't a spear by a long shot, but it's not meant to be. More like a MILSPEC Kali stick. I haven't had a chance to put it in the hands of my escrima practicing friends yet, but I can imagine they could bring a metric fuckton of hurt down with this.

Besides being just small enough to secrete on your person (if that's your thing)  its compact size means another thing. If you are already wearing a fairly rigid set up, it's slim design will keep if from getting in the way, especially if you have 6 to 8 rows of PALS/MOLLE to slip it into. It virtually disappears down the side of a pack, and only pokes out a little on the front face of one.

Once I got it home, I set to bashing, jabbing, prying and generally looking for things to test it on. I stabbed it into logs, and hit them, found cracks in brickwork behind the house and old woodwork to prise apart. Not a mark on the tool, and everything I tried it on succumbed. As expected, when used as a striking tool, length-ways, it resonated a fair bit, but it was manageable. 
Without gloves on for my first round of tests, the knurling held fast, and I had great grip throughout my swathe of destruction. One thing I found was the pen-clip made for an uncomfortable place to hold the tool, and I needed to rotate it out of the way a couple of times, especially when I wanted to exert some more force.  Gloves sorted this right out however, and gave me the added padding to ignore this.

Given its ease of storage, light weight and high functionality, I can see these being quickly being found in the hands and cars of EMT's, and other first responders, as well as anyone who might need "Method of Entry" tools in their regular loadout, without having to call out the big-boys like a Halligan Bar.

For me, having a tool like the MAD Stick close to hand means that I can overcome a variety of problems in or around the house when I don't want to snap the tip off a knife or bend a screw-driver breaking up pallets to fortify the bunker.

The MAD Sticks are only just now going into small-batch production, and the heat-treating and Cerakote process is time consuming, but any day now the first production models will be in the hands of the early purchasers. I have a feeling we might be seeing a lot more of these in the hands of rough men, standing ready.