Review: MIG - SORD Mad-Stick holster

My mate Shane from Rhino Ropework (note: they've gone through a branding change recently, now trading as MIG (Mark's Innovative Gear) have teamed up with my friends over at SORD Australia to put together a line of pouches for the most excellent and useful MADSticks by Rhino Ropeworks. You'll recall the MAD Sticks are a compact solid breaching and pry bar, and be pleased to note that they've gone through some more design iterations and are even madder!

One aspect that Shane / Mark wanted to address, is their very pointyness, which even when looped through PALS/MOLLE, can jab and scrape, and the pen-clip type retaining clip sometimes just weren't up to the rugged outdoor needs of some folks, so he and SORD Australia have come up with this 1000d Cordura pouch. I experienced the need for this myself after months of carrying the MAD-Stick around in my fairly rugged Mystery Ranch 1DAP , the point worked its way through the Cordura nylon and stated to poke me in he sides as I walked. This I could mitigate by shifting it around but one time I picked the pack up and the MAD-Stick fell right out and nearly spiked me in the foot.

  As I'd rather not have this happen whilst out in public I had to retire it from my EDC until they good folks and MIG could set me up with a holster.

One did magically appear shortly after I got in touch with MIG, cudos to their customer service. So. The Holster. The MAD Stick is a 400mm (15.7") long, 12.7 mm (0.50" yeah, fifty cal!) length of 4140 high tensile tool steel,  and the SORD design suits it perfectly. Not too snug as to make drawing it an issue, not so loose as to let it rattle about.
The main opening flap is rimmed with hook and loop strips to secure the stick, and backed up with a webbing strap and a Fastex style clip to ad bomb-proof jump-safety to it. Nobody wants to accidentally catch a MAD-stick I assure you. The heavy 1000D Cordura lends itself nicely to giving the whole holster structure and it is heavily stitched throughout. inside the opening flap is a "pointy end down" indicator graphic, but the holster itself is ambivalent. a metal grommet in the bottom of the holster acts more as a drainage point than as a capture point for the spike.  I have also found the chisel end doesn't pull at the hook and loop closures as much as the spike end when doing vigorous runs.
Speaking of attachment:
The back side of the holster features two PALS/MOLLE straps with reinforced stiff panels and a terminal hook and loop strip closure.
Each strip is suitable for 3 rows of MOLLE attachment for a very sturdy fixture. You could strap it to the back of a plate carrier, to the side of a pack or even off the hip of a MOLlE equipped battle-belt such as the Platatac Bongo or SICC belts.

The black holster by itself is fairly innocuous looking but at 16" long it will stand out swinging on your hip. Not very Grey-man. The side-panels of my 1DAP are already pretty crowded so I stow the whole thing inside my pack, unsecured but safely wedged in now that I'm not worried about pointy ends jabbing though my pack. Check out the whole MIG range and new developments here: Now I can keep my totally legitimately useful / rescue tool handy without causing a public panic!
Well done Mark's Innovative Gear and the whole MIG Crew.

Home Front: Modscape house

I came across this interesting house design, by Modscape.com.au which piqued my interest, as I always look out for good fall-back positions, or even first-front positions. I've covered walled security for homes in the past, and walled storage facilities I've also covered my own home and why it's not all that well suited to sticking out a disaster, so it's interesting to see a purpose built place, and not all that far from myself.

The design brief of this home was to "create an airy pavilion that takes advantage of the views while providing a private haven from the busy road below". Rendered brick walls frame the home to create a protective compound which not only the provides the homeowner privacy, but ensures the home is secure. The home’s long, linear form takes advantage of the northern sun and visually connects to the bush and mountain landscape beyond.

Here is the link to the house design brief.

This modular home, in Berry, NSW,  creates a private home behind security walls for the clients who were based in my own home town of Melbourne.

All of the services are concealed from view behind the high walls, with visitors entering via a large pivoting door that penetrates the wall. They then move through a timber battened walkway where dappled light from the surrounding bushland filters through before entering into the double height entrance space. The main living zone opens out to the north-facing courtyard.

Meeting all the functional requirements of modern, sustainable design, the home has a total floor area of 465 sqm and consists of 11 modular sections with a large, open plan kitchen/living/dining area at its heart. A timber joinery core conceals services such as butler’s pantry, laundry and bathroom and houses a staircase leading to an upstairs area. It should be noted that that upstairs area is exposed and visible from the outside of the walls.

The finished palette is minimal and modest with timber, concrete and zinc used in an uncomplicated manner create a design that is humble and nondescript. All landscaping, including the pool, was also coordinated by Modscape.

FEATURES
Open plan kitchen/living/dining
2 bedrooms with joint ensuite
Guest bedroom
Upstairs "music" room
Butler’s pantry + laundry
2 car garage + workshop
Ribbon strip timber cladding
Landscaping including pool
Hydronic heating
Grid connect solar
Built to Bushfire Attack Level (BAL) 29

Looking at the plans, and the layout, including both the property selected, but also the way it sets in to the surrounding areas, offering security through obscurity, I can see the real value in having a property such as this. Putting in extra rain collection reservoirs, solar and/or wind power generation and a fuel reservoir, vegetable beds and perhaps chicken runs to set up a more self-sustainable setup, you have quite a secure (from mundane risks) and off-grid home to fall back on.

Sneak Peek: HHA PEN and knife

Last week I became the proud owner of two new pieces from knife and tool manufactures  Hardcore Hardware Australia. 

My mother broke a 39year old rule of hers and bought me the very first knife, this lovely LFK05.

I was also one of five winners of a competition HHA ran, and received a TWI02 in the mail. 

Stay tuned for reviews in the next little while. 

Review: SharpShooter

I saw a cool impact weapon in one of my feeds, and got in touch with its creator, Karate Master Robert Moran,  to see if I could try one out. Master Moran was kind enough to send me one, and I've carried it in my pocket for some time now, and can give you my thoughts. This is the SharpShooter keychain and what I can tell you about it.

The keychain consists of four distinct components. The core element is the paracord that runs through the center. This is doubled up and serves as the main conduit for the Sharp Shooter's action.

Knotted at one end, a length of steel tubing, covered in a silicone sleeve for grip is set up to run freely, apart from a silicone gasket, which pins it in place as a friction lock.

A steel o-ring is looped into the main paracord loop and is used as the retention system for the keychain, and its as easy to use as wearing a ring. Being free-floating the ring and the steel tube can slide freely. 

The last component is the keychain component, which features a steel oval screw link as you might find in climbing or in boating. It holds your keys in a nice tight bunch, ready to open your doors, or perhaps offer a face-full of "please unhand me, uncouth ruffian" as needed.

The idea of the keychain is to offer an alternate means of carrying your keys as well as offering a flexible weapon, that unobtrusively sits in your pocket or purse.

Master Moran offers an instructional DVD as well as on-site training at his Dojo. The tool works by cinching up the pipe all the way to the top of the knot, up near the screw-link, and by slipping the toggle back, you can transition from a downward strike with the pipe as a pressure point tool, but which a flick of the wrist, you can "shoot" out the keys, to form an impromptu flail or mace. 

The ring keeps it secure and locked into your grip, but subtly enough that it certainly doesn't LOOK like you have anything other than a set of keys dangling over your knuckles. 

I have tried the flick and swipe techniques, and the strikes with the pipe piece a couple of times, on a couple of different materials, and with some of the techniques I remember being shown by Sensei Guest at a Bujinkan winter camp in flexible weapons, I could see how this could give you a very game-changing strike in a last-ditch self defense situation.

I'd suggest you check your local concealed weapons laws, but if you fancy adding a little something to your EDC to give you an edge, that doesn't raise a lot of eyebrows, for the otherwise noncombative members of your family, this might well be something to look into.

Review: RaidOps - TM-Joe & MF-Delta

Check out these bad boys! I got in touch with a long time source of Wish-Lust for me from RaidOps out of Korea.

They make a wide range of titanium impact tools, knives and hard-wearing and multi-function pieces of wearable art. The two items that I got are the triangular MF-Delta and the evil platypus skull shaped TM-Joe.

Both are made of grade 5 titanium, and are double heat-treated to over 500oC to achieve HRC 50-52. They are finished in a dark-brown patina.

The TM-Joe is 84mm (3.31") x 58mm (2.2") x 5mm (0.2"), weighs in at 42g (1.5oz) and features 11mm (5/16") nut holes in the "ears" and nose" with a smaller, 9mm nut hole adjacent to the larger one in the nose. The very tip of the tool is shaped to act as a pry-bar, with nail-pull at the center. The pry-bar is not chisel edged, so there is no fear of cutting things accidentally, but will limit that "first bite" width needed to get a pry happening.

As well as the mean looking eye-holes, there is a lanyard hole in the middle of the top of the piece which mates with the RaidOps Quick Release attachment clip, a small piece of polycarbonate plastic with two rounded pinching surfaces that fill the lanyard hole, and hold with sufficient force to prevent any accidental dislodging.

A quick forceful tug and the tool comes away in the hand, ready for action. Both tools feature attachment points for the Quick Release mount, and come with a standard ball-and link chain.

The MF-Delta is made from the same Grade 5 titanium alloy with it's dark brown finish.It measures  61mm (2.4") x 70mm (2.76") x 5mm (0.2"), and weighs 31g (1.09oz), 31g (1.09oz). It features two hex driver cutouts, one of which also doubles as a bottle opener. It also features a single 7mm bolt hole, but has four lanyard holes in its middle, and another at one tip.

The MF-Delta, being shorter and more evenly dimensioned is a little less obtrusive to the eye, where as the TM-Joe is more stylized to look like a piece of art. Neither are bladed, with all the edges being rounded if not fully milled. Even compared to the NukoTool Skully or the Nuko ACDT they look more like jewelry or abstract art than an impact weapon.
When snapped off their neck-lanyards, both the MF-Delta and TM-Joe fit both snugly and safely in a palmed fist, those rounded edges don't dig, nick or snag.

The rounded "necks" of both tools quickly slip around the inter digital gaps between fingers, giving you a really secure grip, and bracing against the palm to let you drive them with considerable force into whatever you felt the need to. I put some pretty effortless divots into furniture around the house, with a very satisfying sound. I found that the grips were probably the smoothest and best fitting for my hands that I've encountered for this kind of tool. Great thickness and width of contact points and sufficient aperture to be held naturally.

Worn around the neck, or attached to a keychain, these innocuous tools are both elegant to look at, have a beautiful finish and even a "chime" when struck, I have been really pleased to add them to my collection, and will probably keep one on me whenever I travel, not to mention visit anywhere that regular defensive items might be frowned on.












Be sure to check with local regulations and legislation when it comes to this kind of item. It would be an easy enough thing to confirm, rather than falling foul of LEO's just doing their job. Being booked, fined or incarcerated won't help your ability to respond to an emergency, so be smart.


But be smart with gorgeous looking items that work well and are robust, like the RaidOps tools!

Review: Propper - STL II pants

As first seen on BreachBangClear ..... I really love being able to write for these guys, and upcoming articles for RecoilWeb too!


Here's another great piece from Propper's new line-up, the redoubtable  STL II pants, that came in my haul of Propper loot, along with a Liberty Bottle , the ICE polo shirt, (http://www.epropper.com/p-105-ice-mens-performance-polo-short-sleeve.aspx), their Gen Multipurpose Bag (http://www.epropper.com/p-217-gen-multipurpose-bag.aspx) and a 720 Belt (http://www.epropper.com/p-225-720-belt.aspx) all of which have reviews pending. Watch this space.

Here is what I can tell you about the STL II pants. I've reviewed some Propper pants before and appreciated the comfort and wearability of their design, construction and durability. The STL II's are no different. Made from a 97% nylon and 3% spandex, it has a generous cut and all the hard wearing seams are reinforced, and flat-finished, giving these pants a very comfortable fit. http://www.epropper.com/p-148-stl-ii-pant.aspx

The fabric is soft, breathes nicely and light, a far cry from my old canvas type cargo pants of yesteryear. I wonder how hard-wearing they will be in the long term, and whether they need to fall in the "slacks vs overalls" category of rough-use. I have a feeling running through acacia thorns wouldn't be a lot of fun in these.

On the upside, they feature gusseted crotch allows greater range of motion as well as giving pinch free fit for those of us who go-commando or even sport some jewelry ...

An interesting feature is that the bottom of the legs have a zippered expandable opening, for fitting over boots, as well as a reinforced "kick-panel"  to take some of the brunt for those who punish their back hems a fair bit.

The front pockets feature a reinforcing strip, for belt-clips of knives or key-holders, and are both deep and well lined. No holes poking through or awkward bulges with these. The thigh-pockets are zippered and discreet, as are the rear-pockets. A pair of looped fabric bands on the front two belt-loops

You might notice that I have stuffed my iPad Air into the thigh-pocket. A tight fit, but I'd call that a success, in my "can I pocket my iPad" criteria. This also further demonstrated the clean and subtle lines of these pants. When closed off, there are no bulging baffles or overtly "cool-guy" flaps on these pants. Perfect for blending in with the regular folks out and about, in the office, or in my day-to-day case, in hospitals and giving presentations in board-rooms, without making security nervous.

As Propper themselves state, you'd have to look twice at these pants to spot their tactical features.

Speaking of which, there is even a secret 12cm x 10cm pocket, in the back waistband seam.  Its big enough for me to stash my passports, or a phone, and when coupled with a pair of belt-pouches, is pretty much invisible.

For pants as cleanly cut as these, I like that they still have the "secret-squirrel" feel of their tactical ancestry.  As previously mentioned, they feel more like slacks than combat-pants, that is a plus and a minus, depending on how you look at it.

Review: SAR GlobalTool - ODDjob knife

My buddy Spencer of SAR Global Tool has been busy grinding away at his workbench, adding to his collection of edged tools. Check out his Facebook page, to see the amazing reclaimed file and rasp Bowie knives project, and the ever lustful Inglorious Basterds blades.

You may well remember the SAR Global Tool Micro Elite signal disks, the ever popular Moon-Glow signal disks (I have worn mine around my neck for so long the SOLAS tape has worn off, that's saying something!), the fabulous and devilishly popular with the ladies Dead Ringer Ti comb, and the Dog-Tag Eclipse signal system and the even sneakier bladed version.

Now I have one of his awesome pointies.

This is the ODDjob knife, a 1" x 5" little blade made of  1/4" thick CPMD2 steel. This exotic steel has been treated to HRc 59-60 and stone tumbled to give a beautiful satin finish.

Usually featuring a drop point, simple edge,  but Spencer picked out this very nice recurved one for me, because he knows me well. The thinned down blade makes for an excellent pairing knife, just my style.The edge is keen, and easily controlled, even with its unusual curves.

Along with the individually fitted Kydex scabbard, with its six eyelets for lanyard or screw fitting to gear, this little knife was fitted with a really clever para-cord "Always Open" lanyard loop, a particular invention of Spencer's which utilises heat-shrink tubing to pinch the paracord into a loop, giving a pinkie-hooking structure to grip and deply the blade with a quick tug, whilst remaining unobtrusive.

If I wear this knife behind my ID badge lanyard right, only the loop pokes out. Ready for all those odd jobs. The handle features brown canvas micarta scales, cross cut to show off that spectacular grain. and with inlaid signalling mirrors. This was a delightful extra Spencer threw in for me, as the regular ODDjob's are just naked steel.

With the finger notches textured scale and the finger loop, this little knife fits nicely in my hands, aided by the light crenelations on the spine.

I really like the blade geometry, and the uniqueness of the whole piece. If you can score one, when Spencer (and now Scott, too) are at the grinders, they' be well suited to adding to your utility collection.