Review: Campmaster single burner stove

Carrying on in the series of camp cooking posts, let me bring to your attention the utilitarian Campmaster Single Butane Stove. This simple and straightforward single burner stove only weighs 1700g (3 3/4 lbs), without a fuel canister, and  folds down into a very portable 343mm(13 1/2") x 280mm(11") x 118mm (4 2/3"). I've seen similar burners set up in Korean BBQ joints for at-the-table cooking. I've often used it for exactly that purpose, inside at the dining table and on innumerate picnic tables. The blue enameled steel frame is both sturdy and easy to clean. 

The stove takes standardized 220g Campmaster CRV Butane Gas Cartridges 4 Pack (Countersink release vent) safety cans which are explosion proof and they fit into a compartment on the side of the strove. The cartridge locks into place with a latch in the lip of the bottle and a lever beside the adjustable flame control needs to be engaged in order to connect the cartridge to the stove. The compartment closes when the stove is in operation to protect it and the user. it is well vented in case of leakages. 

The stove has a peizo-electric sparker, triggered by the Flame control dial which is handy. The stove has strong heating power: (Gas Consumption: 160g/h (7.9Mj/hr)) at maximum setting, which is plenty for a number of serves of a meal, or several rounds of quick cooking meals. 

The hob itself is cast aluminium, and the stove-top comes out and when flipped provides a trivet for resting pots and pans on, small enough to hold up an enamel mug for singular brews, perfect for cold mornings in a tent vestibule. The hob head is recessed in the stove-top to shield it from winds Though it should be noted there is a manufactures not not for use below 0oC freezing, presumably because the butane freezes up in the canister or in the tubes.

The stove is lightweight enough that its easily hikeable, especially important if you're going to a fire-free area and want to cook, without hauling a whole BBQ and gas bottle. I have to admit I stocked up on the canisters during the Covid lockdowns, in case there were mains-gas shortages or disruptions as part of my  bug-in / bug-out preparations, thankfully un-necessary. We did have several pleasant summer night al-fresco dinner cookouts, and I've even used it for at-the-table teppanyaki  and hibachi type meals. ( Be sure to ensure it is used in well ventilated spaces and that the stove is set up on a heat-proof location as radiant heat can scorch surfaces. ) The canisters are self-sealing and can be stored for lengthy periods between uses.

Review: EverFire fire brick

When it comes to fires, we have many traditional options available from: gas, charcoal, heat beads, and wood. Apart from gas, lighting a fire can be tricky and time consuming.  I like to use off-cuts and dead-fall whenever possible, and heat-beads to cook on, and reclaimed timber as firewood.  In getting a fire going, the use of everyday firelighters although cheap, sometimes produce fumes or smoke that isn't pleasant. Also you can only use them once.

 I believe I have located something that is a cheap, cost effective, eco-friendly alternative. A clean burning reusable firelighter combined with methylated spirits that burns odorless and can be used again and again. These are the EverFire fire-starting system. They can not only used as a fire lighter, you can use them to cook a meal with no other fuel source. Just place them on a solid non-flammeable surface light them up and place your pan right on top.

The EverFire bricks are made from a 100% natural mineral which is used in various industries and it's totally environmentally friendly.

The bricks are soaked in a liquid accelerant and lit. The creators recommend methylated spirits or ethanol as it is clean burning, with no fumes or smoke emitted while burning. Otherwise you may use any accelerant of your choice, but always be cautious and store in container of choice in a safe location out of the reach of children. Watch their accelerant tests.

The bricks are then lit with match or lighter and the fuel burns. Burn time for metho is normally 10-12 minutes. When cooking only with EverFire firelighters by placing the pot or pan directly onto the firelighters you can increase the burn time to around 17-20 minutes.

  I've found by the firelighters' third use it will give the longest burn time. Burning itself in and having its "pores" burnt clean of the manufacturing process I believe.

After many uses the firelighters will eventually break down back into their natural form. All you need to do is crumble them up and place in your garden as it is very good for your soil and plants.

After their full burn time, and after 15-20 minutes cooling-down, it can be returned to a fuel bath and recharged. The big ones use between 50-70ml per charge. The small ones between 25-50ml. If you remove the firelighter from the fire and put out with a damp cloth, you will use less than a complete burn. Cooling the bricks reduces the thermal shock they experience when dropping into fuel, thus reducing the risk of cracking and becoming less effective. That said the makers suggest hat even cracked they will function effectively.

I found that a single EverFire brick, soaked with methylated spirits was not only hot enough and long lasting a burn enough to send my Fire Box stove red hot but also boil enough water to make two cups of tea and toast some mini-hot-dogs, as well as starting a fire to make lunch on.

For the purposes of domestic fireplace use, its possible to leave the bricks in the fire until it's died and then retrieve them for recharging, to no ill effect. In some scenarios if it is easy to remove, you can do so. This will increase the overall life of the bricks. In closed fires like Coonaras, or other enclosed indoor fires, you can ease he retrieval process by starting the fire with the firelighters towards the front of the fire. After about 15-20 minutes of fire-starting, just remover firelighter and place somewhere safe to cool.

Once cold return to storage container and recharge for next time. The creators suggest they will last for 30+ fire before they are at risk of cracking and crumbling, but this may vary with use. They seem pretty hardy to me and if treated gently, I can't imagine them just falling apart.













A question came up about dousing the EverFire bricks, should the need arise, and what happens if they get wet or are submerged/dropped in water? smothering with damp cloth should be sufficient to extinguish a metho fueled brick, but if it comes to pass that a brick is submerged in water, thy will absorb it, reducing its effectiveness. However correction this is as simple as returning the brick to it's recharging station and soaking it in fuel. Letting it soak for about 30 minutes. Remove the brick, light it and let it burn out, repeat this process a couple of times and the EverFire brick will steam off any absorbed water will be as good as new again.

In all Webers, fire pits, BBQs, Spits, open fires, or anywhere you need to light wood, heat beads, charcoal, or even to use by themselves to cook or create a heat source. As well as a heat source and limited light source, they can be used as a mosquito repellent by adding a few drops of citronella oil to the metho it is fueled by. Multi-function is huge selling point in my books.

The EverFire brick can be cut and trimmed by hacksaw cutting, should the need arise. The bricks themselves are surprisingly light, even when soaked. Jeff the creator suggested pre-soaking the bricks in metho and then bagging them individually before putting into a tub for transport. A small bottle of fuel can be brought along for on the fly recharges but three pre-primed bricks gives a lot of burn-time ready to go. I did so on a recent hiking trip and we had hotdogs and tea on a windy bench and minimal weight addition. The standard sized bricks weigh only 100g but the larger jumbo bricks weigh 250g and both absorb more fuel and burn longer. Three individually bagged bricks, and a lighter fit nicely in a take-away tub, and seal in any fuel vapors nicely.

EverFire sells their blocks in three sets:

Combo 3: 500g containing 2 large bricks and 1 standard brick. Also a handy storage container for the firelighters.

Standard 5: 500g containing 5 standard bricks. Also a handy storage container for the firelighters.

Jumbo 5: 1250g containing 5 large bricks. Also a handy storage container for the firelighters.


I found these to be easy to use, kid and pack-safe, light and handy fire starters as well as a novel stand alone fire source. Methylated spirits are a cheep, safe and easy to manage fuel. My thanks to Jeff for the free sample pack. I can see these becoming a staple of my camping and backyard firepit kit.

Review: Tensile style Skytent

I love tents and I love hammocks, and I've expressed a desire for one of the Tentsile aerial tents for a long time, but they are quite expensive. Not wanting to miss out forever, I kept an eye out and checked out AliExpress, where real things go to be replicated. For Giftmas I bought myself the one-person equivalent. I always feel a bit bad buying knock-offs but at the very least, its getting the very innovative concept out there.

So, given my ongoing stroke recovery and my work situation, we haven't ben able to go away camping, so I hadn't been able to tryout my aerial tent. Australia Day came around and we were invited to BBQ in a park, sounded like the perfect opportunity to try it out. I took some extra webbing strapping, in case we had trouble finding tree's to sling it on, but as it turned out the picnic table we picked was close to three gum trees. I unrolled the skytent from its stuff-sack bag and took stock.

The contents included the triangular base, made from webbing reinforced ripstop with a low (70D) Cordura number and (high quality silicon coating to give it a waterproof index of 2000-3000 mm) the base, which is about 4m a side, had built in reinforced eyelets for the two sets of shock-cord threaded anodised aluminium alloy poles and a light, waterproofed (to 1500-2000 mm)fly sheet to connect to.

It also came with three sets of 6m (19') loop-ended webbing, and shackles to for it to the base. At one end a ratcheting system for increasing the tension was supplied.

The base triangle comes with a breathable B3 bug-screen net with twin zippers. Built into the "roof" are two sleeves to feed the poles through to keep the roof in place and add stability when setting it up and to drape the fly over.

Once set up, which took a bit of doing (pro-tip; set the tent part up on the ground in the middle of your space, then string your straps. I rigged my straps with a truckers hitch. Getting partial tension on the tent to set it at a good height was just matter of sliding the webbing up to the right height, one tree at a time and tightening the truckers hitches once they were even. PRO-TIP 2: get the three corners as evenly high as possible. this will stop you sliding "downhill" on the slick ripstop nylon.

Once set up, the remaining slack can be eaten up with the ratchet, but this takes some doing. I'm glad we weren't setting it up in the rain. Once fully tensioned which it really needs to be, we put the fly on, which  had nylon hook hardware and shock-cords. The 240D fly has a single up-and-down zipper which coupled with the wide door in the flyscreen, makes a nicely framed entry/exit and window when pegged back. with its attached toggles.

The interior is spacious, the 4m sided equilateral triangle provide  almost 7m². of floorspace, with 1.2m (the almost 4') of loft, with its quite steep sides, there is  a lot of real-estate.

The wide webbing reinforcements throughout the base distribute weight nicely. I'm 192cm (6'4") and weigh 90kg (200lbs).  Laying right down the middle, legs splayed to the bottom corners, I was very comfortably supported.

This skytent is rated to carry 400kg (880lbs) and the heavy-duty ratchets buckles have a staggering 2.5 ton minimum breaking strength. Even so, the makers recommend only stringing it at a maximum 1.2m / 4' from the ground. As a good rule of thumb, you shouldn't set a hammock up from higher than you would want to fall from. Or climb into.

The supporting poles that give the skytent its vertical structure are seated in these washer equipped eyelets, and with the shaped ends of the poles, they seat securely and remain in place even with the rambunctious efforts of Tactical Baby. The seams are all also all double stitched. The whole tent is well finished.  I had had worries about the quality, given it was a knock-off, but it's been well made and put together.

All packed down, the tent weighs3.0kg or so, including the included webbing and the ratchet. and packs down into a stuff sack measuring 50cm x 20cm x 20cm. It's not too bulky nor heavy and would make an excellent addition to a backpack for a camping trip.

Internally as I've said it is spacious, but good set-up is key. if any one point of the triangle is higher or lower than the others the effect is a slow and steady slide to the lowest point.

I took it camping off to a full-emersion live action roleplaying weekend, "After The Fall" .

So I found myself three trees and set myself up. As with most tents, second time was much quicker and easier, and i'd had my lessons learned from my first attempt so it was pretty quick.  I even slung a second hammock along side, for lounging in when I was in my full tyre-armour kit. TO somewhat disguise the bright green of my tent and its fly sheet  I draped the whole thing in some scrim. One thing I didn't want was anyone tripping and falling onto me as I slept, so I put it a little higher than previously.

So high in fact I needed to step up onto one of my tactical milk-crates that I pack my camping gear into. I also stowed my kit under the hammock, off to one side from the Skytent, in case I did have a fall.

Inside at one of the three apexes was a pocket system which worked quite nicely with a jumper stuffed in it as a pillow. I used the zipper as an attachment point for my night-light as there weren't any internal loop hangers.


All in all I am both impressed by and happy with my SkyTent, and would heartily recommend you al lgo check out the original design at TENTSILE - Stingray

After an afternoons romping by Tactical Baby, and perhaps more roughhousing than was necessary, one of the poles has been warped and now adds an uneven curve to the dome, but no real issue there.  Certainly no fault in manufacture. I've managed to straighten it out a little but eventually  I might either replace it or run it through a pipe bender in reverse.

The Skytent handled nicely when occupied by two. even if one was little and bouncy and the other big and lumpy. Alas, I haven't tried it with two adults, but they are rated for it.

I put  a yoga mat in it when I camped, just as insulation, it was plenty comfortable to lay in in warm weather but any breeze below will chill you right down. Setting up an under-quilt like those made by the Go-Outfitters would work  a treat, but you'd need a triangular one.   

One thing I found was that the fly lifted and flapped about a bit, so I lashed it down underneath with some handy paracord.


All in all and excellent product and not just a gimmicky concept. all the benefits of a hammock and tent combined.


Pro-tip #3: set your doorway at chest height if you-re expecting friends to pop by. Nicer conversations for everyone when you can be eye-to-eye.