Showing posts with label SLXtreme. Show all posts
Showing posts with label SLXtreme. Show all posts

Monday, June 30, 2014

Review: Snow Lizard - SLXtreme 5 iPhone case

Attentive readers may recall the Kickstarter for the rugged, batter and solar powered phone case, the SLXtreme that I covered a while ago. You may also recall how I took it on the Tough Mudder twice last year but it didn't survive the second attempt.

The hinge cracked and I had some water leakage into the unit, temporarily shorting out my phone, and killing the unit. I was sad, because it was otherwise a great piece of kit, but I also realised that I had put it through a pretty arduous test for a phone case.
However, undaunted, when I saw that Snow Lizard had gone on to make a case for the iPhone 5 (which I had subsequently upgraded to) I got in touch with them to let them know that I was keen to put it through its paces, and they kindly sent me a replacement, in the form of the new and improved SLXtreme 5. In safety orange no less.

It features all the same aspects as the previous model: latch-locking top opening, press-button battery-check and solar power switch, 2,550 mAh battery, membrane speaker

and mic covers, rugged buttons for volume and "home" buttons, a lanyard loop, capacitive touch-screen membrane.  It also sports a thumb-screw bottom sealing latch, and an access port for both USB charging and for the headphone jack. Forward and read-facing camera ports allows for photo and video capture and selfies.

There had been significant improvements as well.The in-built battery is 550 mAh larger in capacity over the "4" version.
 The bottom access port is now tool-free access (even though previously all you needed was a coin), the main latch is now a two-part metal, rather than polycarbonate.

The most exciting new feature however was the headphone jack socket and adapter. With an o-ring sealed plug, and matching sealed adapter, it is possible to have the phone safely cocooned and waterproof, as well as having access to headphone and mic jacks, a feature I've missed since my yellow Walkman days

As with the previous model, the SLXtreme 5 is rated at IP-68 with an operational depth of two meters, so in theory you can take SLXtreme anytime you are in or around water. It doesn't float, however, so I kept mine well attached to myself with a lanyard of paracord. This "open" shot gives you an idea of the engineering used in this cases creation, and it certainly paid off.

having access to the USB port (not the Lightning port of the phone, mind) allows you to charge the phone and its built in battery, but not synch, as far as I can tell.
The main port includes optically clear and easy to clean lenses, padding and improved closing latches, as well as hinges, substantially stronger in design than the previous model, I was pleased to see.


The solar panel was also improved, with a more matte finish to the surface, and what looked to be improved collector crystals internally.


The finish and the feel of the case as a whole was a lot more refined, and with the extra metal hardware, and the changes to the bottom panel, I was really impressed with the design improvements the Snow Lizard team had put into the next model.

When I took the plunge, (so to speak), and took my phone in its new case into the warm waters of Fiji, I knew I was going to give it a good test. With its "2m" depth rating, I was trepidatious  about how it would survive the trip, but as you can see, it worked wonderfully.
I had to remind myself a few times to use the buttons to control photo operation, as the main screen doesn't work under water, but I was able to switch between still and video controls on the surface easily enough, with just a flick of the wrist to clear water from the surface.

I found that the edges were a little tight, when dealing with water droplets, for dexterous screen manipulation, but the macro-control I needed worked just fine. The phone was bone-dry after almost an hour in the water (and subsequent jet-ski back to the resort), and the footage turned out really well.

All in all, I am thoroughly pleased with my replacement SLXtreme 5 case, and would highly recommend them to anyone who wanted to do some wet and wild filming, mapping, long distance phone calls and catching up on your favorite Apocalypse Equippedness blog from a beach-side or mountain-top retreat with their trusty iPhone.


Tuesday, November 12, 2013

Wish-Lust: Kickstarter Juggernaut - iPhone 5 case

I've been terribly remiss, and wanted to quickly get a post up about a Kickstarter from Juggernaut Defense which is almost at the end of its pledge pitch, and has a ways to go.

Ever since I killed my iPhone 4 SLXtreme hard-case whilst doing Tough Mudder, I've been on the lookout for upgrades.

When I saw the iPhone5 Ruggedized/Wearable case from Juggernaut on Kickstarter, I knew I had to be in on the action.




These are some of the reward options, I'm especially keen on the PALS/MOLLE mount, and the forearm mount, as well as the case itself, which will be Water proof, Dust proof, Drop Proof - (to IP-67standards), the front screen will feature hardened anti-glare glass protection (whilst still being capacitive) and the case itself will be built for quick phone insertion and removal, as well as the quick release mounting options I mentioned before.

Two styles of chest mount: PALS/MOLLE if you're using a compatible vest or plate carrier (or even something like the Hazard4 Ventrapack) or a Sternum Mount to interfacing with a backpack, hydration pack, or other shoulder straps. The wrist mount, not unlike the Platatac Recce map holder it provides a hands-free use option, which secures over a range of sizes using a "BOA mechanism", especially suited to wear over clothing.The final mount option is the vertical backpack strap mount, which places the case in portrait (vertical) position. This mount is in development and Juggernaut promise to share updates as we build prototypes during the Kickstarter project.

The case itself (prototype pictured here) has a single opening end with a sealed access door allowing fast insertion and removal of your phone. It has a large robust latch, so there is no hassle with snap on or screw together cases where sealing can be compromised.

All phone controls are accessed through sealed, nickel plated stainless steel button modules, although the Fingerprint scan is not an option.



All phone cameras and LED flashes use optically clear sealed lenses so that the camera and flash work while inside the case, that's a real boon, especially considering the fuzzy photos I took with the SLXtreme case. The data/charge connection is accessed through a sealed door on the bottom of the case and secured by a captive thumbscrew, which cant be lost or dropped, compromising the case.

All in all this is a really impressive case, and system as a whole, and I really hope that it funds, or if not, that they end up doing a production run at some stage.



Wednesday, September 18, 2013

Events: Tough Mudder #3 September 14th


Last weekend I participated in my third Tough Mudder challenge. Previously I reported on what I wore on my first and then subsequently, for the Stampede and then earlier this year, my second Tough Mudder. I see the Tough Mudder challenges as more than just an Endurance Sport event, but as a training and testing opportunity for me. Training myself to overcome obstacles, and go the distance, but also in anticipating the hardships my team-mates will face, and either preventing or mitigating them.


The Tough Mudder Pledge is a good starting point for this:
  • As A Tough Mudder, I Pledge That ....
  • I Understand That Tough Mudder Is Not A Race But A Challenge.
  • I Put Teamwork And Camaraderie Before My Course Time.
  • I Do Not Whine, Kids Whine.
  • I Help My Fellow Mudders Complete the Course.
  • I Overcome All Fears.

My team mates did not feel up to running the length of the course, which is fine, I hate running, but I can, and I have been training to do so. However, the discipline of NOT running, of not leaving a team-mate behind for personal glory, was what it was all about.

Here's the course for this time: MelbourneSpring2013-CourseMap
There were all the old favourites, as well as some new ones.
 One set of Berlin Walls was replaced for forwards sloped walls, giving no purchase to climb over. There was a "Warrior Carry" where team mates had to carry each other for a distance. A couple of different "over and under" climbs and my favourite, the Cage Crawl, where you had to navigate a long caged-in, water filled trench.

I took my iPhone along, in its SLXtreme waterproof case which unfortunately suffered a non-spectacular failure, with one of the hinge-caps breaking off, causing it to leak. This took my phone offline for a couple of days (rice in a take-away-tub, by a heater recovered it) but I managed to track half of our progress with it here: 11.84 km run with @RunKeeper.

That was a bit sad, but that's the way these things go. I also trialed a couple of other pieces of kit: I fitted my Contour GPS to my shoulder via the Picatinny adapter and fixed it to an ITS Picatinny-MOLLE adapter which in turn I mounted to my trusty First Spear OAGR vest.

Knowing there would be dark tunnels, I fitted my Princeton Tech Switch MPLS light to my MOLLE on my chest, along with my ill-fated SLXtreme case, and a  glow stick from UVPaqLite. I also tried out my newly-acquired rejected prototype Platatac hydration carrier that I scored from eBay, filled with Gatorade. I'll cover that separately, but it served its purpose adequately. TAD Amphibian shorts and my x-strapped (this held them on, but rubbed me raw) Blackhawk kneepads rounded off my regular load.

I kitted out with my Z-E-R-T patch and call-sign tab, as well as another off-market Platatac prototype admin pouch, which I kept a laminated copy of the course map, and a spare cyalume stick in case my team-mates needed some encouragement in dark places, when all other lights go out.

Lastly I wore my GoST Paleo Barefoot PRONATIV's along with their Lining Socks, which, after a 2km walk from parking to the event, 18km of course, and another 2km back to the car, were amazing.

This time I decided to collect loot, and picked up two discarded hydration packs, one I gave to a team-mate, the other I slung, as well as several "technical shirts" and a bunch of gloves. We'll see if any are salvageable.

I had a really good event, it was lots of fun, cold, wet, dirty fun. I feel that again I have proven to myself that I can not only achieve this kind of goal myself, but can also aid others in doing so too. Orange Headband ahoy!

Wednesday, December 5, 2012

Review: Snow Lizard - SLXtreme iPhone case

I backed a rugged, heavyset and multifunction iPhone case on Kickstarter, before but when the design of the iPhone 4 and 5 was still in question, I chickened out of one waterproof case, but later backed another. More rugged, more functional, and more feature packed, I was relieved to see another project offered, and I had the gumption to back it, and then I had to wait.

This was the case that I backed. Billed as the Aqua Tek S on Kickstarter, and produced by Snowlizard. When it was ready for release it was renamed by popular backer vote, to the SLXtreme. Offered in a variety of colour options, I opted for the coyote-tan, surprise, surprise.

The basis of the case is that it fully encloses the iPhone 4/4s in a water, dust and shockproof polycarbonate shell, whilst still leaving the majority of functionality available to the user. During the design and manufacture process, the forward and back facing cameras, and flash, volume up and down buttons, and the main home and power buttons are all accessible whilst in the case.

 It turned out that the mute/orientation slider and earphone ports were too difficult or impractical to accommodate.


The multitouch screen, mic and speakers are faced by a thin polymer membrane which alternately allows the electrostatic use of the iPhone screen and transmission of sound from the speakers, and to the mic. I was skeptical to start with, but was pleasantly surprised both by the crispness of the control surface (no real difference than any other screen protector) and of the sound, (slightly muffled, but perfectly acceptable sacrifice for the protection offered when adventuring).

The base of the case has an access port for charging and synching the device by micro USB, with the 32pin iDevice plug being built into the insides of the case, the port being protected by a sealed flap, which is secured shut with a thumb screw. Also held in the front base of the case are a set of blue LED battery charge indicators.


The top of the case latches open and closed to accept the phone, which sits very snugly, as it is built with low tolerances, and even complying with IP68 & Mil Spec 810, but not so snug as to be impossible to take the phone in and out, even with the screen protector I have on it.

The latch has a slide lock, to help resist those "unexpected underwater openings"

The two camera ports are equally well designed, and don't significantly degrade the picture quality,

All the buttons could be described as "stiff" and the inlay to get to the edge of the multitouch display is pretty tight, but I'd rather a little awkwardness over a busted screen or waterlogged phone any day. The stiffness of the buttons only goes to reassure me that they won't break, or be a source of failure and ingress.


The case is large, it's bulky. It is very reminiscent of the old brick phones around when mobiles broke into wide circulation. This however, is not a big concern for me, given the nature of the protection offered and the additional features built in.

As well as being rated to 2m submersion, mud, dust, sand and rain proof, shock resistant and generally ruggedized, this case also packs a built in lithium ion polymer battery, providing DC 5V - 1A with 2000mAh capacity, giving an impressive boost to the standby (380-hrs), talk time (7hrs 3G, 17 on 2G), internet usage (7hrs 3G, 10hrs on WiFi) and 46 hrs audio, or 11 hrs video play.

However, the SLXtreme goes one step further in that it's back face has a built in solar panel, capable of generating 10 minutes of talk time for an hour of sunlight. This may not sound like a lot, but in a survival situation, it is plenty of power to send text messages, power up the GPS features of the iPhone, read up instruction manuals and yes, make calls as needed.

I have a lot of navigation, mapping, surveying and "guide" apps on my phone, and for the times when I am off-grid, but still want access to my data, and the stored knowledge, knowing that I have a near infinite supply of charging power, is very reassuring.


The Snow Lizard team took a lot of flak over the delays in production, from the initial Kickstarter which was successful in March 2012, till when I received mine in November 2012, and the iPhone 5 coming out in the interim. I really feel for them, but had no such concerns. Kickstarting isn't an exact science, and I'm just glad I got a product.


I am happy with my "less than newest" model of phone, and the accessories I have for it.

The case is rugged, light (at 317g including the 4s, making it a tad under 200g of battery, solar charger, water, crud and shock proofing that I can take into the field with me, do the Stampede or Tough Mudder wearing, or whatever.

Not being able to plug my headphones into it is a drawback I am willing to live with, for what I get, and I look forwards to Snow Lizard to come up wit hthe PALS/MOLLE attachment they posted mock-ups of. Till them, its off to Platatac to ask the lads what they can do with me to include this case in my loadout.






Related Posts Plugin for WordPress, Blogger...