Review: Fishbones - Carry-all hook

Here is an interesting piece of kit that came from the same minds as the Gravity Hook, and Fishbones, Piranhas gear ties. It's the kind of thing that I would probably make for myself if I had a metalwork workshop myself, where Brent & Eldrick Garcia of Out-Tek, LLC saw a need, and made something to fit the need.  This is the Carry-All.

Basically, Brent didn’t want to see his guitar constantly getting knocked over. So he made this thing. It’s basically a stainless steel hanger that can be fitted with either a length of nylon webbing or paracord.

Massively over-engineered, it is way stronger than it needs be, and that opens it up to my favourite kind of gear. Rugged, multifunctional and simple.

The body of the Carry-All is cut from a single piece of 3/16" stainless steel, the main hook opening is based around a 4cm (1.6") radius opening, much like a regular coat-hanger hook, and certainly wide enough to loop over all manner of pipes, racks, ledges and branches.

There is a finger grip section much like on a trench knife, with has a 2.5cm (1.0") radius opening, which is plenty of room for even a gloved finger, and there is enough room for two fingers, and along with the back side thumb-riser "guard" allows for a very secure grip which in turns allows for a quite comfortable hold-point for using the Carry-All as a carry-handle.

It isn't climbing rated, and Brent only mentions holding up to 45kg (100lbs) but I suspect you could carry more than would be comfortable before it breaks.


Designed to primarily take 1" webbing, the Carry-All has two sets of twin webbing slots, one narrower, one wider. These enable you to friction lick the webbing easily, as well as doubling the feed over to ensure a really secure lock. Looping both ends of the webbing through the eyes forms a webbing loop that can then be used for the Carry-All's primary purpose, to grab and hang awkward, unusually shaped and odd pieces of kit, be they the neck's of guitars, a pole to form hangers, or any other sort of webbing strapable item, which could do wit ha hook to attach it to a suspension point.

So hang your awkward stuff up to 100 pounds. I would like you to have one too.

With an overall length 12.5cm (5") and 7cm (2.8") wide, the 3/16" stainless steel is hefty and as sturdy as you could want, whilst still being essentially pocket-sized. The 18" 1" webbing supplied could be swapped out with any other 1" webbing, but as well as this, there are three paracod sized holes drilled into the base of the hook to facilitate stringing it with paracord instead.

It seems a odd piece of gear, it served a particular role, but also with a whole bunch of new options available for hanging, strapping and suspending, especially if traveling and you want to keep a bag of wet ground, for example. The balance points are well placed, and the stonewashed finish is easy on webbing and paracord alike.

I also envisage using these for picking up cast-iron pots from firepits, carrying twine-bundled loads of kindling, and stringing guy-lines for tarps.

Review: Great Outdoors - Silver Grande 9L

Having quite the expansive family these days (3-4 adults, 1-2 little kids, depending on who is around) when we go camping, (which really isn't often enough) we try to make the most of it, and be as comfortable as possible.

Once the little ones have grown up a bit, we might consider more hiking type trips, but until then, we camp where we can unload the SUV. That means we can afford to camp BIG. This means, in this case, we can take a big tent like the Great Outdoors - Silver Grande 9L.


Unfortunately it seems the "Great Outdoors" line has gone under, but similar tents like the Spinifex Franklin, or the Wild Country - Getaway II 9MR but none that I've found in my recent searches have the four-room option that the Silver Grande features.

 The Silver Grande is split into four distinct areas, each with a 360o zippered vestibule, and close-to-the-flood bulkheads. The whole of the base is bucketed to a good height, ensuring that the interior stays dry in inclement weather.

image swiped from eBay

This really is quite the palatial tent with measures 6.4m in overall length (2.1 x 2.2 x 2.1) and 3m wide in the middle, 2.15m at the end rooms. The front room adds another 2.1m to the width to a total of 4.3m. The side rooms are a little bit shorter than the main central room, which tops out at a very respectable 2m15m.

With all the internal doors open, and wrapped up in their self-storing toggle and loop attachments the interior is really very spacious. The walls are at a high angle, so you maximize the available space, so often lost in lower dome tents. The internal walls are all a very light, breathable material, and well fitted. Window and main exterior doors are all fitted with a translucent insect proof mesh, with clear PVC windows and a skylight in the flysheet.

two sets of colour coded poles make up the structural supports, and each is designed to slot into sleeves built into the inner shell, and mount on captive pegs attached to split rings, attached to the base.

image swiped from eBay

The fly itself is a silvered 3000mm rated waterproofed polyester. It has hook-and-loop tabs situated at key points to anchor it to the poles for added wind resistance. The inner shell also features clasps on elastic loops, ensuring both a taught but also stable attachment. Without the fly, the tent is very light and airy, with the large swathes of mesh siding and the very light material of the walls letting light stream in. The silvered fly adds a significant level of shade, without being gloomy, and dramatically cuts the wind. It also blocks out harmful UV radiation, and keeps the tent cool in the Australian sun.

With the doors open, or at least set up in the awning-up configuration, with each of the side rooms having the option to put one up, and the main room from the back side also can be set up as an awning. One set of poles are provided to do this.

The rooms all have sets of pockets built into the walls, either in the corners, or in the under-window areas.

image swiped from eBay

There are also loop attachment points on the ceiling, and the internal door toggle and loop fittings also provide attachment points, for lights, clothes and the like. The storage setup is quite thoughtful, ans also takes advantage of the high-angled walls effectively.

The tent's "front room" doesn't have the same bucketed floor as the main body of the tent, but does feature an attached floor that is mounted to the front wall of the main room. The flysheet covers this area and provides a sheltered, but not sealed enclosure. We typically use this area for gear storage, leaving our camp-kitchen, food stores and the like in here, and as a boot-changing area.

image swiped from eBay

Not being sealed, you still need to be aware of bugs and other creatures getting in and around your gear. This can be a real concern for those of us who live in Australia. Or perhaps in North America if you have racoons and bears to worry about.

This is billed as a 9 person tent, and there is plenty of room for that many, if you make good use of the floorspace and don't need to have too much walking around room. We generally have had one of the side rooms for Tactical Baby and Triceratops Girl, with their fancy collapsible camp bunk bed, the main room and the other side room for the adults. In doing so, we can open or close the internal walls for (visual) privacy, and also use them to keep any bugs in or out, as the case may be. The walls are translucent enough that lights can be shone through them, to give a nice ambient glow and a central lantern can illuminate the entire interior sufficiently for everyone to find their beds and boots.

Being a thin walled tent, you obviously don't get much in the way of sound dampening, so be sure to pick your company and camp site well!

The flexibility of having doors for each room was a great addition, especially as we use the central room as the main bedroom, but left me with the concern that the zipper-capable little ones might wake up, and wander off into the bush at night. This was easily solved by extending the exterior door zippers all the way to the top of its arc, well out of little-hands reach. We also left the internal door unzipped at little-people height, so they could come in to us if needed, but still providing some more of the bug-limiting compartmentalization.

One feature that we've never made use of are the floor-height zippered cable and hose ports, situated just above the bucket sidings in the rooms, allowing us to feed power or plumbing into the tent. Even at powered sites, we don't tend to bring mains-charged items with us, so this hasn't been needed.

Just remember, this all comes at a cost, weight. 28kg of weight. This is a big tent, and whilst the bag is easy enough to stow in the back of the RAV4, a bit unwieldy (it's dive-bag sized) and it has wheels on the bottom corners, but it is heavy. Way to heavy to hike with. This is a drop and build base-camp item, not a roving set. That said, with instructions sewn into the bag, and colour coded poles and sleeves, (which we augmented with permanent marker, to indicate which way around the fly needs to sit) the whole thing takes about 15 minutes to put up, and 20-25 minutes to pull down and pack up. All in all this is a great family tent, and if we ever needed to abandon home for any reason, and have no fixed plan of where we might stay, I would strongly consider this as a temporary retreat.

It certainly works for short to medium term camp-outs for us.

Update: 5.11 Tactical - TDU Kilt re-release

The good folks over at Soldier Systems have reminded me (and now from me, to you) that 5.11 Tactical have re-released their Tactical Kilt.

I love mine, in fact, I'm wearing one right now. I brave both weather and the harassment of the ignorant (and actual Scots) to be comfortable and bad-ass. Pants are tyranny and I love freedom. Don't you?

Check them out at:
http://www.511tactical.com/kiltoff
http://www.511tactical.com/tactical-duty-kilt-134360.html
and hopefully on http://www.511tactical.com.au/ soon

Available with the following colors: Khaki (a greenish brown), Coyote (a tan brown), TDU Green, Tundra (a deep green), Charcoal, Dark Navy, Black, original MultiCam, and Realtree Xtra and in sizes 28-54.

If that wasn't cool enough, 5.11 are also donating $10 from every kilt sold to FBINAA and We Salute You Veterans.

Review: ITW GrimLOC

 When you start to collect a lot of gear, gadgets and kit, the question of "how do i get this to stay on, when I stow it, but come off when I want to use it?" comes up. I've used carabiners for years and years, to attach my keys, wallet and the like to me, mostly using the lightweight accessory carabiners you find hanging by cash-registers. Occasionally I have purchased proper climbing-rated ones, for when I've either been climbing, or wanted to carry some serious gear.

The natural progression for me is to see what others are using, which lead me to these: Apparently originally designed to allow Marines to add hydration systems to their webbing, this is the ITW Grimloc, and they offer a lightweight alternative to metal carabiners for gear storage and utility.

The high strength polymer provides a corrosion resistant, solar heating thermally resistant and lightweight alternative to steel or even aluminium carabiners, for non-load rated tasks. I've read that the breaking rating on the GrimLOC is 80lbs (36kg) and this is actually a design feature.  It prevents the wearer becoming caught up in slings and gear and trapped in potentially a threatening situation. It is also strong enough to take a fair amount of rough treatment, as a sling connection point to a plate carrier, for instance, without compromising utility.

 The way it works is that the curve of the D is hinged, with a locking end which operates by a push button. This mechanism is spring loaded, and incorporates a very clever Self Purging "SP" ports along the sides of the D to eliminate sand from blocking the mechanism.

These ports, along with the deeply fluted sides of curve of the D also add to the positive grip needed for   wet or gloved hands. This also reduces mass and adds strength.



 The locking mechanism will pop open given sufficient force, but will also open with a simple one handed press on the button, and opens partially, or with a little more force locks into an open position.

I've used this to hook my phone case to, run hydration tubes and comms cables over and round my shoulder straps and even offer a quick spot to dangle a bag.

The real magic of the design however, is the built in PALS/MOLLE loop feature.

That angled slit 1/4 along the length of the bar of the D allows enough of a standard 1" webbing strap to be fed into the gap that it will be able to be slotted in, secured into position, without compromising the strength of the clip, and eliminated the dreaded "carabiner roll" where the gate can migrate away from where you want or need it, usually pinching you in the process.

Here are a couple holding my ZuluNylonGear CAOS Admin Pouch to my Platatac Bullock Echo

When fitted properly, the GrimLOC will sit in place, where you need it, for as long as you need it, and come out without any fuss or tools.

I usually fit mine such that when they open, the gate forms a hook, rather than dropping my gear down to the ground. I suppose if I really wanted to go for the "high-speed/low-drag" alternative, I could flip them around, but really, I'd prefer to keep my gear snagged to me at this stage. I know, such a Geardo ...

These are great clips, come in a variety of colours to math your kit, and fill the gap that el-cheepo accessory carabiners simply can't be trusted  to fill.

Event: ConFest

Over Easter, I took the family to ConFest, a big "hippie" lifestyle and camping festival. We've been a couple of times before, but this was the first time we had gone with the two littlest ... Triceratops Girl and Tactical Baby. This made it quite the adventure, with the two of us adults, a teenaged lady, a 4yo and an almost 2 yo. Camping for four days, a long way from home.

Its not as if ConFest is really roughing it, by any stretch of the imagination. Ive seen any number of campsites there which were not much more than a sleeping bag on a drop sheet, under a tarp, and yet the inhabitants had hot cooked food, from the large market area.

We took our new (but second hand) 9 person Great Outdoors - Silver Grande 9L  tent, as well as a pair of the Spinifex - Deluxe Padded Camp Stretcher beds (XL)   a folding port-a-cot for Tactical Baby and the very ingenuous Spinifex -  Double Bunk bed cots. We didn't want to spend our holiday with cranky, sleep deprived children.

Where am I going with all this? well, we packed all of our gear into my Toyota RAV4 5-door, including the two kid seats, and drove the 7 hours to ConFest, and I used the exercise as a "get the hell out of Dodge" system check. We could load up x-amount of stuff, and only that. We were cheating because we were planning to buy some food at the market, and stopped for lunch on the way. However, it was a good test of what we would need, and what we could do without.

Here's a shot of us crammed in, the backseat full of kids, the front seat full of road snacks and gear.

We took solar chargers for our electronics, lights and the like, the Australian Easter has no shortage of sunlight. The roof-rack was filled with bedding, the beds, a spare tent, camp-tables and chairs, all covered with a tarp. A cheep tarp. Lesson learned, get a better tarp.

We also packed more food than we ate, never a bad thing, and we chose our food carefully so it would not require excessive care or refrigeration. It would have lasted us a week, if we'd been careful. We had packed baby things, including formula, nappies and changes of clothes.

My big box of camping kit, which included cast iron pots and pan, tripods, spits, fire starters, hatchet, lengths of chain, wire and rope, candles as well as cutlery, plates, bowls and the like. A 30L water jug, ensured we had water at the site, without needing to continually trek to the fresh water hoses. Then there was the luggage, we each packed differently, I wore the same Urban Dax pants each day, changed shirts each day and wore my Paleo Barefoots everywhere. The rest of my kit went into my Platatac Light Field pack which also doubled as a Yoda-carry-rig for Tactical Baby as we wandered the festival.

You can see the Fiskars log splitter I chopped three days worth of redgum firewood and the Zombie Tools Deuce I took with me because ... hippies ... zombie hippies ...

What did I take from all of this?

We took too much stuff. The new camp beds, in combination with the huge tent were worth it for the comfort we gained. Even though we could have done without in an emergency, they were a great investment in comfort. We tool a lot of "snivel gear" and probably not enough food and water for a "get out of Dodge" situation.

A giant festival like this is a good indication of what a well meaning "lets bug out of the city" refugee camp might start out like, and harkens to the chapter in Max Brook's "World War Z" dealing with that.  I looked around at the haphazard sites, and the supplies we had all brought, and reaslised that we in the middle of a couple of thousand people who were a weeks hunger away from barbarism.

Sleep tight campers!

Review: Aquayak - Snapper Pro

I was driving past a series of shops recently, and stopped at a set of lights and looked over and there it was, my local Kayak shop. I felt it was time, given the water only five minutes down the road from me and the fact that I haven't really covered any sort of transport caught my mind. I have used kayaks before, mostly in lakes and rivers in Canada, in the Rockies.

I dropped them a line after looking over their website and I was delighted to be offered the chance to trial a couple of their models. The first is the Snapper-Pro, the fully kitted version of the Snapper.

This is a 2.7m (8'10") long ‘sit-on-top’ kayak with a range of features, including coming in a range of colours, all in their propriety 'alkatuff polyethylene' material, which holds a UV certification for maritime plastics. Pretty impressive. 

The hull is deeply molded and 0.8m (2'7") a the beam. It also only weighs 18kg empty (just under 40 lbs). I lugged it out of the shop, lashed it to my vehicle (more on this later), drove it home and looked it over before taking it out on the water.
I wanted to get a closer look at the hull cross section that had been hinted at on the website. It did indeed have a very interesting profile, and I was keen to see if this unique low-drag underwater shape that provided the speed and tracking through the water without the need of a complicated rudder that they advertised.

The last kayak I had used was a "sit-inside" type, you traditionally see, and required "eskimo-roll" survival training in the event of capsizing. On the AquaYak boats, you just climb back on like a surfboard.

Here is a cross-section of the hull, sitting as a display in the shop. The polyethylene hull is both spacious and well reinforced with supporting pillars scattered throughout. The pillars seen here actually form part of the self-draining system the boats share, as scupper holes that allow sloshed in water to drain back though the boat. The hull is around 6-8mm thick, and has most of the major features molded right in, with very few cuts or holes drilled into the body.


   

The kayak has a capacity of 120kg (265lbs) and as long as you keep in mind the operator (for me, that's 85kg, leaving 35kg of gear haulage) however, after handling it in the water, I wonder if that might be a very conservative rating. There are three storage ports built into the hull, fore, central and aft. The turn-lock sealed ports allow you to store a variety of gear in the hull, away from the worst of the elements, and keep your center of gravity low at the same time. 

 

For the fishers our there, the central port comes fitted wit ha removable, drop-in bait bucket, all the better for catching the fishes with!

 

As I mentioned earlier, I didn't have any trouble moving it around, even on my own. I keep a couple of karate-belts i have collected over the years in the boot, which make for excellent roof-rack ties. The smooth edges of the hull laid right on the roof of my car and I lashed it through the built in safety lines. Getting it up and down was a pretty simple exercise, the biggest trouble was doing so in the high gusting winds I had on my paddling day. I have roof-rack rails, which aided in lashing, and I could, if i needed, have put a specialized kayak carrier on, but it didn't really need it.

 

Here's where I went, a little sheltered bay on Port Phillip Bay. You can see that it wasn't a very clear or fine day, it was drizzling on and off, a strong wind was zipping in and there was a bit of chop. There was also a fair bit of a hill to portage the kayak over. All part of the test I wanted to give it.

 

 I got the Snapper-Pro off the top of the vehicle, put on my vest, and helmet,  grabbed the paddle and trotted down the hill to the beach.

 

   

Getting it down on the beach, I unfolded the padded seat, and latched it to the loops bolted to the hull with the brass clips provided. With two forward, and two behind this padding fitted in nicely to the deeply molded internal seat. Webbing straps form each of these four points  and allow you to customise the fit and feel of the seat. I opted for a slightly lent back approach, because i'm so tall. I sat in it on the sand to adjust, then got ready to push off.

 

 

 

 

 It wasn't overly cold, but with the wind, even the bit f spray I got would be chilly, so I dressed for the occasion in my Platatac Microfleece half-zip top and matching Microfleece Sniper pants under my North Face pants and Paleo Barefoots.

I knew I wouldn't stay dry,  but I wanted to stay light, and warm.

Pushing off, I moved through the shallows, and was amazed at the very shallow draft the kayak had. in barely more than ankle deep, I was floating just off the sand, and with a gentle push of a paddle, I was afloat.

Paddling out into the bay, it took me a few minutes to remember how to coordinate arms to hips, to ensure stability, and not to dig too deeply when on the shoreward side of waves. 

All along  the rim of the Snapper-Pro is a safety line, a heavy cord, mounted securely to the  hull by a series of hard plastic loops. There are also two drag handles, fore and aft, to assist with hauling and climbing back in, should you go over. You can see here that my feet were right up to the front of the cockpit, as I have really long legs.
It wasn't uncomfortable, but an extra few inches would have made a difference for me.
One thing that I hadn't anticipated was the scupper holes letting water into the cockpit, and right into the seat of my pants. As I say, I had anticipated getting wet, so this wasn't a problem, but just be sure that you bear this in mind. For those with shorter legs than mine, there were a series of channels in the sides to act as in-situ footrests, which was a really cool idea.
I found that I could access the center port with no difficulty, but the fore and aft ports were moslty out of reach.

The kayak was very stable in the water, and responsive too. I haven't paddled for 15 years, and quickly found myself zipping over waves, from end to end of the little bay, against the current, against the wind, and across both. It was only when I over-paddled and over-balanced that I had any troubles controlling it. 

You can see over my shoulder, the elastic cargo netting,  which I left empty for my trails, but would fit a decent sized pack, like my Platatac light field-pack or a child quite happily (obviously, you don't put the child under the straps). You can also see the aft drag handle. Both the inter-hull cargo compartment, and the external cargo compartments in the aft and between my knees, so there is plenty of space to haul cargo, or passengers. Bear in mind the weight limits, and get your bug-out -kit waterproofed!

I had a couple of tumbles whist finding my water feet, and found that I could quickly (if not easily) haul myself back on board.


Not only did the kayak handle well, and was easy to right, haul and lug, it was sturdy and stable. I feel I could have fished happily off it (using either of the two built in rod-holders in the aft) although I would need practice to get my cast coordinated so I didn't dunk myself.

I had a real blast with this, and I think I will be trying to include more watercraft skills in the future in my planning.I also took a bunch of Contour Cam footage, and have included it below:




http://contour.com/videos/watch/aquayak-snapper-pro-1


http://contour.com/videos/watch/aquayak-snapper-pro-2


http://contour.com/videos/watch/aquayak-snapper-pro-3-dunkings


http://contour.com/videos/watch/aquayak-snapper-pro-4


http://contour.com/videos/watch/aquayak-snapper-pro-5-hauling