Events: Snow trip - gear summary

I was lucky enough to be taken up to the snow for my 40th birthday not long ago, by my mum, who kindly took my whole family up for a long weekend at the Falls Creek snow resort in the Victorian Alps. Snow, in Australia? Yes, it snows here. Sometimes, in a few places. When we went there was a base-cover of around 80cm and it was forecast to be between -3oC and -6oC, with 24cm sow expected each night, or thereabouts.

It was a 5 hour drive, including an hour on the shuttle-bus, as we didn't want to go through the hassle of snow-chains and on-mountain parking, as well as windy, icy mountain roads. Leave it to the professionals, I say, and have a nap on the way.

That said, when we arrive mountain-side, it was sleeting pretty heavily, and continued to do so for the majority of the day. We lost a bunch of snow cover and everybody got damp. Some more than others. That's kind of what I wanted to cover in this post. What I wore to stay warm and dry. What gear  I took.
 Now, I cheated to some extent in that I hired ski-boots, and the outer-layer jacket and ski-pants for when we actually went skiing, (my first time in 20 years, since I lived in Calgary, Canada).

However, I also packed accordingly, for the times I wasn't skiing, and I'm glad I did.

I've had quite some experience in cold climates, both Canada, the UK, Danmark, as well as holidaying and I know they key elements to not having a bad time are to stay dry and warm. Not always both, but if you are one, or the other, you can usually get by. Cold AND wet? You're going to have a bad time.

Here's my layered approach to a trip to the snow:
I wore as my base-layer, the Platatac fleece leggings, and DriFire long sleeve shirt. I don't have any fancy socks, but tend to get hefty heavy-duty socks from the supermarket and wear them to death These ones are Kirkland's,, from Costco. nothing special, but long lasting and don't get stinky.
I wore my Danner Striker ii GTX combat boots, which could do with a thorough polishing, but I hit them with a liberal coating of Kiwi boot waterproofing spray and they worked a treat, even when I stepped through slush up past the ankle. Be sure to open the laces right up if you're waterproofing boots, and get in around the tongue to ensure you don't miss any leakage points.

I looped the leggings foot-hole stirrups over my socks, so they didn't ride up, and I had full coverage from toe to belly-button. Tucking my shirt into the elastic waist of the leggings then carried that all the way up to my neck. No cold draughts.

For my outer layer, I took my snow-proven Propper Adventure Tech shell outer pants, which offer a wind and water proofing layer that I really appreciate. They don't have a lot of pocket real-estate, but I made do, and didn't either loose anything, or lack anything on my adventures.

Over the DriFire shirts, I wore the lightweight Propper windcheater which provided me a really good lightweight dry-layer, as well as having a good neck-seal. My one was a bit too shirt, so my super-long arms tended to poke out, but I had a plan for that anyway.

As my outermost top layer, I chose my Baubax multi-function jacket, which is a semi-hard shell with a hood and thumb-hole fitted wrist extensions. I'll be covering this in detail some time soon. It held the sleet off really well, although the cuffs and the wrist extensions got pretty sodden. They could do with a dose of waterproofing spray as well, I think.

As far as outer layers went, it was a spot on combination for what I was expecting, although had I wanted to stay even dryer, I should have packed my Hazard4 Poncho Villa but I erred on the side of less gear. I should have left out my spare 90's era snow-pants I got when we moved to Calgary, but I'll pack it next time.

For head and hands, I wore my Peruvian fleece caps, along with one or two Headsox to keep my neck, mouth and ears warm. I wore my dual layer, long wristed Condor Nomex gloves which I also gave a liberal waterproofing. That can of spray was an excellent addition and I can't recommend them enough. I think I shall trial a few different ones soon.

I wore a skiing helmet, to which I mounted my Contour Cam in its waterproof case. I gave the misty fogging Arena Flakjack goggles, with a smoky lens fitted, which remained mostly useable when I was skiing, but I needed to keep taking them off and wiping them off. The goggles really helped me have a clear and wind-free view of where I was going at upwards of 40kph downhill, who knew? I didn't hit ANYTHING this time. (I killed two aspen saplings at least, when living in Calgary).

I wore my Platatac Bravo hydration pack, with a 3L Source WXP bladder in it. I have a Blackhawk Side Plate carrier mounted to the bottom of my Bravo, as its hook-and-loop top makes it an excellent flat-pack pocket.

All in all, I was really pleased with my loadout, but most of all, I can't go without saying that my favourite bit of cold-weather kit was the SORD StormTrooper belt-fitted muff. Not only did it's pockets keep my needfuls (like my Manta emergency strobe, CLIF bars, and the like), they also were a place for me to stuff my gloves, and also just plain keep my hands warm. Warms hands mean good-times.

Wish Lust: Devtac Ronin mask

I saw some really cool masks in my thread and I got in touch with the owners, and got the low down on their line.

DEVTAC co. inc. Japan started in 2010 and was a subsidiary of R&D Trading and consulting company. Devtac stands for developing tactics specialized in Business consulting and strategies. They have recently expanded their business to industrial designing concepts and manufacturing.
Their location is in Japan, Shizuoka ken Hamamatsu Shi Enshuhama Kenei jutaku 3 chome 2-22-204 if you wanted to visit a storefront, but otherwise they can only be reached online.

Their masks are not commercially made, but rather are individually crafted.  That have some very special capabilities. These are carefully handcrafted pieces customized to fit your needs.

Firstly, the masks are only ordered directly from them through Facebook, Youtube or email.

The main frame of the masks are fiberglass, with hardpoints for adding both bolt-on armour, and accessories. For those in need of Prescription glasses you can order one here. The offer several different versions, starting with the kevlar lined versions:

DEVTAC KEVLAR LEVEL 2A

Kevlar set is $1350USD ballistics tested up to level 2a(unofficial).

DEVTAC BALLISTICS KEVLAR PLATES MATERIAL TEST

DEVTAC TESTS 1 Super 38 1400fps 100gr NIJ Level 3a rating, 9mm on mp5 1200fps and 45acp 980fps

DEVTAC KEVLAR LEVEL 3A 

$1480USD Ronin mask Kevlar level 3a with 7mm plates. The Kevlar back plate to make a wrap-around helmet is $485USD and separately sold. 

DEVTAC RONIN KEVLAR LEVEL 3A TACTICAL BALLISTIC HELMET! BULLET PROOF

The main mask has an ultralight nylon fiber mesh that is reinforced with special resin and is very flexible, it can withstand strong impacts. The open cheeks are designed for easier aiming with scope or iron sights without putting undue strain on your neck. The cheek has 3 built in neodymium N52 magnets on each corner on both sides so it is absolutely hassle free when you want to put on or remove the cheek plates as quickly as possible.

DevTac masks come in the following sizes:

regular long- men 180-195cm tall 95 kg in weight

Regular short - men 158-175cm tall , 60-80kg in weight

Wide long- men 180-200cm tall 90-220kg 

Wide short- men 158-179cm 90kg-220kg

All the lens frames are ventilated by built in AA battery driven micro fan and a speed dial down by the cheek, and by some very clever design to both vent, and circulate air, they offer fog-free vision, with around a 120 degree arc of vision. The polycarbonate lenses fit into a removable frame and can be popped out to replace scratched or damaged units.

A cover is available for paintball users to stop paint getting blown into the mask from eye-hits.

For those of you who don't tend to face ballistic threats,  DEVTAC RONIN MASK(fiberglass) with  7mm fiberglass plates are $ 480USD comes with 2 pairs of lens, clear and amber or your choice. Without the plates is $350USD. including everything. 

BACK HELMET with extender and plates is $195USD and $145USD without  plates, (as an add on), as with the kevlar version, this offers fully-wrapping head cover, and an enclosed shell, held in place with straps and magnets.

Additional options are things like a built in NVG PLATE with shroud: ($75USD-Fiberglass $135USD-kevlar) and even a MOHAWK helmet decoration for $69USD.

N50 Neodymium magnets spaced around the back of the mask, and the front of the back plate to hold it in place. Each magnet has a 1.2kg pulling capacity, so are very sturdy. The cheek plates are also held in place by magnets, allowing the user to remove them in the field to give you a cheek-weld to a rifle stock or to improve venting. The crown, mouth and ear plates are bolted on, for stability, but have venting ports, with heavy mesh below that, to give venting access for when you need.

All parts are replaceable. The mask has 1 year warranty on electronics and 2 years on the frames.

Paint options depend on the availability of the paint for DecTac at the time. They also offer water transfer prints with Multicam and ATACS now available for $80USD per frame.


DevTac aims to provide Airsoft and Paintball PPE but their venture into kevlar lining might well make them a player in designing armour or use in more dangerous fields.

They offer the Ronin helmets in a variety of colours, with the flexible polymer base and nylon mesh inner, the plates and eye lenses, along with all the straps you need for a front-facing mask, or the magnet attaching options for the back-plate if you choose to go that route. One thing you'll need to keep in mind is that manufacturing is only done every 3-4 months or so, and slots are limited so DevTac ask that interested people make a reservation.

Payments are through wire transfer, and Western Union and pre-order needs a down payment of $200USD for airsoft version and $500USD for ballistic version. Shipping is 45.00$USD (kevlar version is 65$USD) Japan Post, EMS or SAL worldwide flat rate. Extra pair of lenses are $27USD.

--------------------------------

SAMURAI MENPO MASK 

Basic price is $115USD it includes magnets and garter straps and triglides with no metal bolts.

$145USD will include the metal bolts and holders and leather straps. 2 years warranty.

Shipping is $35USD, and is sent via EMS Japan Post and takes 4-7days

They ask for a downpayment of 50$USD for the menpo.

The DevTac masks are most excellent to look at, and if the field-footage is to be believed, they do the trick. I'd love to get my hands on one, for shear bad-assery, let alone armoring my head.

Review: Arena FlackJak goggles

I picked up a set of goggles a while back which I have added to my gardening, crafting and disaster preparedness kit. It's been a whiles since I have had a big set of goggles, my last set being a paintball mask, as I've made do with safety glasses or my much loved (and currently broken) Barz Optics goggles glasses to protect my eyeballs, in a way that my slim glasses just don't.

High speed fragments, harsh chemicals, dust and smoke in the eyeballs are just no fun and will ruin both your day and survival odds, which is why I look for ways to protect mine.



These are the Arena Flakjak goggles as seen under my Ops-Core style bump helmet This is the kind of setting they are specifically designed for, and you can see by the sleek fit, they really marry nicely with the brim of the helmet. They even fit my glasses reasonably well, although there is always a little skew one way or another when nose piece shares space with nose frame.

Arena state that their goggles feature what they call Razorback technology, which deals with fogging, particulate and moisture, by providing the a good airflow rate with a really interesting ridged vented filtration to create non-fogging conditions behind the lens while preventing debris like sand, moisture, and flying debris to enter the goggles.


The lens itself as well as the anti-fogging coatings, features OptiWide geometry which really makes for some really good optical clarity and distortion free peripheral vision to at least as far as I can see clearly with my glasses on, and only reduces my overall angle of vision by about 2cm or so at each side.

The lens material is ballistically designed for maximal eye safety exceeds Z87.1 - 2003 Plus standard and meets MIL-STD-662F (as related to .22 caliber, 17 grain, Type 2 fragment simulating projectile) standards. Which means my assertion for using it for for yard and craft work is probably spot on. Power tool fragments are not your friend.

One really nice feature of the goggles are the Buckle Management Retention Fastener (BMRF). This system allows for both quick and easy strap replacement, but also sturdy fitting both over a helmet, and against your bare head. The fits are quite different, and the rotating fastener really allows for this.

The modular buckle system also provides the goggles to integrate with a variety of helmet platforms, I tried it with my bump helmet, but also my Pro-tec Classic helmet and a couple of the hard-hats I have laying around.


One really important feature of any goggle is the lining and seal. The lining of these are made of the VS Foam, which is a proprietary goggle foam designed to wick moisture away from your face. The surface is comfortable, and the body both compressed enough to make for a good seal, but also not so soft as to over-compress.

I recently took them out for a running test which gave them a pretty good test of the fogging as well as the fit.

The certainly fit very nicely, were stable and very comfortable, but after about a km in, at 12kph, they began to fog up, and stayed that way, on or off, for the duration of the run.


I suspect that in a dry environment, they would probably work out pretty well, or perhaps if there had been more of a breeze, and a third party de-fogging treatment might well prove effective. It was a shame to find how fogged they became, as I can imagine in a hostile environment, or undergoing other strenuous activity (as I'd also found this to happen whilst doing some grinding and drilling and home) that this could be quite a risk to be aware of.

Still, I'd rather have some goggles than NOT have some goggles, and these will certainly have their place in my preparedness kit, to be sure.