Review: CamelBak HAWG

With thanks to CamelBak and as first seen on BreachBang&Clear.

I caught up with the reps from CamelBak at the SSAA SHOT expo, and they were kind enough to send me one the re-released Mil-Tac H.A.W.G. packs, to demo before they hit the shelves.

I am always on the lookout for a new pack, and as ever, want to set myself up with something that does double duty. Here's a link to the now discontinued pack, which if you can find it, it seems to be well though of in the pack communities.

I was really pleased to get this, and whilst I've not been able to take the pack out and give it a thorough field test, as it needs to go back to CamelBak after I've had my paws on it. That said I have had a good look over it and this is what I can tell you about it.

Unlike the older the 4 channel, 7 row PALS/MOLLE of the Mil-Tec H.A.W.G. the carriage grid on the new H.A.W.G. appears to have been replaced by a more sleek and unobtrusive 5 channel, 10 rows of the new 6/9 style platform, or something that looks very similar to it.

There is a broad panel of loop-field on the top front of the pack, for putting ID's and morale patches. The back of the pack has three raised areas of 5mm closed cell foam, making up the Air Director back panel for optimal load distribution and breathability. It has a really good feel on the back, even when the pack is loaded up. There are kidney flaps to guide the waist straps, with D-loops built in on top of them to give a good range of motion when wearing it.

The back of the pack opens up with a long asymmetrical zipper, which allows the fitting of a 3L hydration bladder, in this case the CamelBak Mil-Spec Antidote Reservoir Long with Quick Link. I liked the looks of the bladder too, but as it's a returner, I didn't try it out. However, it features a bite valve adapter which is very cool, manually opened adapters can be a pain. The tube clicks off for faster refilling with auto shut-off, so no leaking, and the new Fillport, is reported as the industry’s largest opening with air-light ¼ turn open/close for quick, secure seal and it also can’t be over-tightened.

The interior of the hydration section is also padded, giving you an insulated compartment, both from your pack and your back. Cold drinks stay that little bit colder, and you don't have a cold weight pressing on your back as you hump it around. Loops in the top of the bag take the hook on top of the hydration bladder.  

The older H.A.W.G. has a total capacity of 23 L in its 48cm (17") x 26.5cm (12") x 26cm (10") and weighs a surprisingly low 1.2kg (2.75lbs) which comes from it having a 500D Cordura on the outwards facing surfaces, with the back faces being 420D nylon on the shoulder harness back side and raised pod panels. The shoulder harnesses are filled with 10mm EVA foam, and all the internal surfaces are made of lightweight 210D nylon. The mixtures make for the reduced weight of the pack.

The top of the front of the pack features a stash pocket, with a dummy-cord and clip built in. Its also worth noting that all the zippers are fitted with string pulls to silence them, which is a feature I'm liking seeing on so many packs these days.

The 6/9 webbing will take all PALS/MOLLE pouches and accessories I've tried on it, so it's simple enough to hot-swap your existing pouches onto the new format built into the H.A.W.G.


Twin ports behind the shoulder straps give access to the hydration tube, and in an interesting addition, there are two access points tucked in behind the waist straps. these allow you to rout the cables up under the arms, rather than over the shoulders, where they could perhaps snag on weapon straps or the like.

You could also feed the waist straps back into the pack, to get them out of the way if you weren't intending to use them. Very tidy design.

Inside the main pack, there are in fact two zipperable sections.

The front section, which has dual zips and opens 3/4 of the way down, is lined in lightweight 210D nylon and on the back of the panel, has a set of pockets sewn in, a triple pen slot, two note-book sized pockets, and one the width of the pack. These would be good for the administrative type gear you might have on hand, but don't need to secure in any special way.

Maps, phone charger gear, a survival tin or even a IFAK like the ITS ETA kit could sit in one of these. Drainage grommets with mesh lining are found in the bottom of the section.  The front section was quite spacious, and would certainly do to stuff with a number of items, especially if they would lay flat easily. The 6/9 webbing is sewn right into the front of this section, so there isn't any padding between your pouches and the contents of the first section, something to be aware of if you are loading up the outside of the pack.

The inner section, which sits between the front "admin" section and the distinct hydration section, is even roomier. Again, it features a dual zip 3/4 opening, and the same drainage grommets in the bottom, but has the advantage of the internal padding on the hydration side, keeping condensation from forming and spreading through to your stored items.

Again, its pretty featureless, although it does have three wide webbing loops sewn in at 3, 9 and 12 o'clock, giving you attachment points for gear, or even to run shock-cord through to for some internal spiderweb structure to pack things down. I think that would be where I'd fit the McNett Gruntline, if I were keeping the H.A.W.G.  for myself.

I like a bit more internal structure to my bags, because I often have a lot of small needfuls kicking about, but for a small daypack like this, I suppose I would make do.
It was very comfortable to wear, and easy to don and doff, with the shoulder straps sitting nicely, and adjustable, with a pretty standard sternum strap to keep it locked down for long, arduous or exciting traverses.

The bases of the shoulder straps were set securely into the bottom corner of the pack, and looked like they'd take some abuse, and whilst I didn't get a chance to test it our under heavy loads, the waist band seemed to sit nicely on my hips, and keep everything where it needed to be.

The twin top and bottom compression straps were a nice touch, with hook-and-loop webbing keepers built in, they would allow bulky but soft gear like sleeping bags, outerwear and the like to be stuffed into the pack, and then buckled down tight to reduce bulk, nicely.

Twin rows of webbing sewn onto the base of the back would allow got you to set a sleeping roll, tent sustainment kit or other bulky but smallish items to the outside of the pack, without too much hassle.

I found the way it sat to be really comfortable, both directly against my back,but also in relation to my shoulder blades, neck and hips.  I had no feeling that it would interfere with the kinds of scrambling, crawling and other misadventure that I find myself doing. It also had a nice sturdy drag handle, for those times when I might want to be pulled out of any of those situations, or just to keep my hands on it whilst waiting for a plane to or from somewhere.

All in all, the new CamelBak H.A.W.G. is a very nice pack, simple design with some sophisticated elements. certainly a new look at an existing product, which is always good to see.

Wish Lust: Platatac - BF pack

Early last year I popped into Platatac HQ in Hallam and shot the breeze with BDC himself. He took me through the warehouse, and the factory, where all their in-house kit is constructed.

One of the things he showed me was the then as-yet unreleased BF Pack,
and I was pretty impressed. I then saw them again having been given prominent display at the SSAA SHOT Show this year, and whilst I haven;t managed to pick one up myself, I wanted to get a bit of a Wish-Lust review out there for you all, as they look like a really innovative pack.

The BF pack is designed as a short patrol pack, with key features to cover a variety of soldiering needs.

It would provides every soldier with a personal TACEVAC litter, SSE bag and room to enhance mission capability as needed, according to Platatac.

The main feature that sets this pack apart form anything I've seen previously is a lightweight TACEVAC litter, capable of carrying a soldier and his equipment, out of harms way for further treatment, built right into the pack.

Pic swiped from Platatac

The pack itself is comparable to that of other short patrol packs like the Propper UC pack I recently covered , measuring 46cm (18") x 27cm (10") x 9cm (3.5") internally but encompassing an expanding  SSE pocket allowing quick stowage of documents or extra equipment to further your load capacity. This is stored away behind zippered flaps, and cinching compression straps and topped with a hook-and-loop cover flap to keep it secure.

Pic swiped from Platatac

When those straps are unhooked, I wonder how well the fabric of the SSE pocket holds up against the load of the front of the pack, but with it, I've no doubts.

An ADDITIONAL kangaroo pouch beneath the external cover flap will take a triple shingle or insert for extra mags/medic supplies or other similarly sized kit for even more sustainment in the field.

Clever design also adds a pocket for hydration bladders to be stored behind the cord-locked SSE pocket.

Pic swiped from Platatac

The pack also features a small 3 row, 5 channel PALS-MOLLE covered external admin pouch with a two internal mesh pocket allows you to store and have easy access to essential documents, gadgets, spare batteries, cyalume or whatever kit you need to have on-hand when out and about. There is no shortage of storage in this pack, and that's even before you look at the main compartment.

Pic swiped from Platatac

Internally the main compartment is fitted with full PALS-MOLLE webbing, all of which is also loop-field for taking either permanently attached pouches, or "tear-away" ones. the "back" is fitted with 7 rows of 6 channels, and the front lip has 8 rows of 6 channels. The whole thing clam-shells for ease of access to everything stored.

I must say I really prefer this over the all-loop/no MOLLE lining of the Propper UC pack, as most of my internal carriage would be permanent pouches. There are three zippered off internal pockets, one on the back, and two on the front the back one being big enough to take a 3L hydration bladder. Two ports give hydration tube / antenna access points.

Another cool feature is the wire fed Quick Release System (QRS) built right in. Feeding the included wire through the built in loops, and the back of a plate-carrier, or a larger pack, you have the option to with a yank of the top handle, release the back and have full access to its features. 

This makes utilizing the built in and lightweight TACEVAC litter, which is designed to be capable of carrying a soldier and his kit,out of danger. I checked, and Platatac don't recommend using it as a hammock, it's not designed for that. The two sides of the litter stow away into hook-and-loop closed inset pockets, and are accessed by simply pulling away at the tabs. The pack straps can even be stowed away in the top pocket when the QRS is employed.

All in all, from the twin side carry handles, to the use of the same quality materials and hardware I've come to expect from Platatac to the level of detail given to not only carry capacity, but also clever storage options for all the loads, the BF pack would be a good step up from my old favorite the Bulloch Echo even before the addition of the litter feature.

I really hope this kind of system makes it's way into regular use, I can only imagine the benefits to those putting themselves in harms way to have a fast and effective way to deploy a TACEVAC system like this.

Events: SSAA SHOT show 2015

I attended the Sporting Shooters Association of Australia (SSAA) Shooting Hunting Outdoor Trade (SHOT) show in Melbourne over the weekend of the 23-24th of May.

It's a big trade show that cycles around Australia, and is in Melbourne every two years. I went two years ago, and reported on it here.  It seems to be only a small shade on the big Las Vegas events put on in the US especially when you consider the BreachBangClear coverage.

That said, I had a good time, and got to see a lot of cool stuff.

I will just give you a few lines here and there to go with the pictures, and the like, as there was a lot to see at the hundred or so stalls, with everything from taxidermy to targets, bow-hunting to rifles and scopes.

The focus was almost entirely sporting shooting and hunting, as there isn't a big tactical and personal defense market in Australia.

 The Beretta stall had this display of pistols, with a variety of their pistols from the M92 range, as well as some old cap-and-ball style too. It was really nice to see the old along side the new.

This big bad rifle from SAKO (in 308WIN or 338LM) caught my eye. I've always been one to lean towards "bigger is better" when it comes to my arm-chair firearms assessment.

Weighing in at over 6kg, (13.2lbs) this was a big piece.









There were a variety of different gun-dealers, (go figure) and Gun Emporium was one of the big ones. All manner of hunting and target rifles, and kit. 

Here's a very cool little gun that I saw, a folding skeletonised folding Rimfire rifle, in 22LR or 22WMR, the Little Badger. 

This folds up into  a small package and comes with its own nylon carry-bag. Perfect for a pack in the wilds, or if you're gong to be salvaging in a wasteland.







Blaser had a impressive lineup too, some very well made pieces on display.

LEGear had a stall again, filled out with all the 5.11 GEar I've come to expect. No new gear that I noticed, but their heavy winter coats look good.

I met up with some of my mates from Q-Squadron ZERT .

I hadn't ever met these guys in person before, but it was a great chance to shake hands and out faces to names. ZERT on!

 I had a good drool over the Accuracy International rack. Some very fine looking pieces of nail drivers there.

I especially admired the thumbhole grips, which were a modular design accessory for these pieces. Again, offered in the big bore 308WIN or 338LM.

As well as all the rifle sellers, there were numerous hunting and trecking suppliers, as well as archery and bowhunting suppliers to browse.

There was no shortage of things for sporting shooters and hunters to peruse, but it was all very light on tactical or survival gear.

I did get to play around on the ATV's on display, thanks to Polaris, and if I had significant disposable income (or some actual practical need) I'd be well tempted. They offered singles, doubles and even quad-capacity vehicles, for all your dune-jumping and mud-bashing needs ...

One of the most tempting items I saw for sale were the new boots in the MUCK boot company range.


Waterproof, ruggedised and comfortable, they have three new boots, and well worth looking at if you find yourself often in wet, cold or sloppy conditions.















I was delighted to see Platatac having a stall, and got to catch up wit hthe guys, who showed off the HHA ASOT-01 again, but also had on display their just-about-to-be-released stretcher pack.










This innocuous sustainment and medic's pack comes fitted with a variety of external and internal loop-field and PALS/MOLLE attachment options.

The magic is in the pull-away top and bottom panels which deploy a last-ditch stretcher for rapid CASEVAC. I saw these in the factory months aga, and they're getting ready for retail sale. Stay tuned!

I also really liked the looks of the Warwick Firearms AR-looking straight-pull bolt actions, an Australian company.
 
These are offered in .223 and .300 BLK chambers, with three barrel lengths and two different upper lengths. They build these to spec, so if you're in the market for a very professional looking piece capable of being fitted out with all the bells and whistles, you might want to give them a look.











Always a sucker for big-bore, I spotted a Barrett M98b in .338 Lapua in the Clatton Firearms display.

Such a size-queen ...

having not brought myself to capture any of the Barbi-Pink camouflage on display "for the ladies" and enplaned to the horrified, practical and ever fashion conscious Omega why Blaze Orange can be a legitimate stalking colour-scheme, we agreed that we'd both prefer Real-Tree or one of the more widely accepted military patterns, she was delighted to come across this dapper sporting shooters outfit at the Beretta stall.

Not quite my thing, but, she's someone I'm willing to make concessions for, there weren't many other partners in attendance at the SHOT show, and perhaps sporting shooting and hunting is mostly a boys-own club, but I'll take capable and engaged family in a survival situation any day!

I enjoyed the SSAA SHOT expo this year, and made some good contacts, which will hopefully be fruitful and informative in the weeks to come. Stay tuned!

Review: Fenix - TK-51 light

I had the good fortune to be introduced to Braent Hong,
Asia Pacific Sales Manager for Fenixlight Limited at the SSAA SHOT Expo by my friends at LEGear Australia and made an impression about my love of all things lighting.

He recommended I contact their marketing department, and sign up to be a beta-tester, and after many month of negotiations, I received this pre-release TK-51 model light. This is a BIG light, and it certainly performs.Here it is stacked against the HexBright crowd-funded light, I have covered previously.

Let me tell you about the TK-51 ....
At 18.8cm (7.4") long and having a grip diameter of 4.8 cm (1.9"), and weighing 430g without the batteries, this is quite a serious hand held light. At the buisness end, it features two  Cree XM-L 2 (U2) LED's, in a tear-drop configuration of reflectors.

The body of the light is made of machined aircraft alumiunium, Type III hard-anodized and features a toughened and anti-reflective coated glass facing. The two Cree LED's sit in differing reflectors, one large and deep, the other quite shallow. Both reflectors were mirror finished. The glass was in-set from a smooth lip.

The tail-cap was crenelated, and two of the opposing crenelations feature a strap hole for securing a lanyard. The tail cap unscrews to expose the battery holder, which is well labeled to ensure that not only the battery holder, but the batteries themselves are properly loaded, avoiding any misloads.

Speaking of batteries, it is designed to take three 3.7V Li-ion 18650 batteries, which for those who don't know are the big-brother of the CR-123A batteries becoming so prevalent in the resilient gear market. It will also take six of the CR123A's in place of the 18650's, and even the 3.2V 16340. In the absence of a full load, it will even operate with one or two batteries alone, but at much reduced performance.


the TK-51 has some interesting controls, with individual controls for the spot and flood LED's, which ramp up from Low, to Medium, Medium-high and High modes, each accessible by a tap of the appropriate control. It also features a memory, such that the on/off button will recall the previous settings for both LED's. Momentary Strobe can be produced at any time by holding either LED controller, and cycles between two distinct flash frequencies. Momentary "TURBO" mode is achieved by depressing the on/off button, and gives full power to both LED's. Which is a LOT.

Each LED has a Lumen output of 10, 150, 400 and 900. This effectively ramps up with a button press for each LED control, offering considerable control of light output for the user, given their need. with a Single LED runtime, running from 420h at Low for a single LED, to 1h 45min for both LED on high, there is also considerable operational variety. I found that the buttons were perhaps -too- easy to press, being raised from the surface, and had a very light pressure needed to activate.

Fenix state the beam distance is effective to 425m, with a peak beam intensity of 45200 cd. Put simply, it packs a whole lot of light, and can throw it a long way.

This shot is of the TK-51 with both LED's at high, in TURBO mode, putting out 1800 lumen, and lighting up my whole street. I angled the spot down, so as not to side-blind passing cars at the end of the road.

Low Flood

Low Spot

The low flood and spot were hard to catch on my iPhone 5s, but the reflective paint of my old car glinted well enough, remember, this is 10 lumen

Medium Flood

Medium Spot

The medium options, at 150 lumen match most over the counter service station and supermarket lights that I've had. My trusty "household blackout light", the 5.11 ATAC-A1 is only 103 lumen (but off a single AA) .

Medium High Flood

Medium High Spot

At Medium High, the TK-51 is putting out 400 lumen from each LED, doubling that of my CR123A powered Surefire 6pX.

High Flood

High Spot

At High, the LED's are outputting 900 lumen, which even outstrips my HexBright FLEX, and is just shy of my new car headlights. On top of that, the built in circuitry has both output lock-out, meaning that it will produce the same light output for as long as the charge allows, then drop to the next level, and so on, rather than dimming gradually. At the lowest power levels, the light will blink its LED's three times as a last-ditch indicator of power loss. There is also overheat protection, which down-shifts the output until the light cools. During my use if the light, the finely machined texture on the grip was good in the hand, and the light had surprisingly good balance. I hate to think what it would feel like wielded in anger.

Combined with the mass of the light, its 1m shock resistance, and IPX-8 (2m) water resistance, this is a serious light, for serious use. I bought rechargeable batteries for it, and a charger, which comes wit ha car-adapter, which I think will greatly expand the use I get from this light. Now to find a pouch for it!