Events: Tough Mudder #3 September 14th

Last weekend I participated in my third Tough Mudder challenge. Previously I reported on what I wore on my first and then subsequently, for the Stampede and then earlier this year, my second Tough Mudder. I see the Tough Mudder challenges as more than just an Endurance Sport event, but as a training and testing opportunity for me. Training myself to overcome obstacles, and go the distance, but also in anticipating the hardships my team-mates will face, and either preventing or mitigating them.


The Tough Mudder Pledge is a good starting point for this:

• As A Tough Mudder, I Pledge That ....
• I Understand That Tough Mudder Is Not A Race But A Challenge.
• I Put Teamwork And Camaraderie Before My Course Time.
• I Do Not Whine, Kids Whine.
• I Help My Fellow Mudders Complete the Course.
• I Overcome All Fears.

My team mates did not feel up to running the length of the course, which is fine, I hate running, but I can, and I have been training to do so. However, the discipline of NOT running, of not leaving a team-mate behind for personal glory, was what it was all about.

Here's the course for this time: MelbourneSpring2013-CourseMap
There were all the old favourites, as well as some new ones.
 One set of Berlin Walls was replaced for forwards sloped walls, giving no purchase to climb over. There was a "Warrior Carry" where team mates had to carry each other for a distance. A couple of different "over and under" climbs and my favourite, the Cage Crawl, where you had to navigate a long caged-in, water filled trench.

I took my iPhone along, in its SLXtreme waterproof case which unfortunately suffered a non-spectacular failure, with one of the hinge-caps breaking off, causing it to leak. This took my phone offline for a couple of days (rice in a take-away-tub, by a heater recovered it) but I managed to track half of our progress with it here: 11.84 km run with @RunKeeper.

That was a bit sad, but that's the way these things go. I also trialed a couple of other pieces of kit: I fitted my Contour GPS to my shoulder via the Picatinny adapter and fixed it to an ITS Picatinny-MOLLE adapter which in turn I mounted to my trusty First Spear OAGR vest.

Knowing there would be dark tunnels, I fitted my Princeton Tech Switch MPLS light to my MOLLE on my chest, along with my ill-fated SLXtreme case, and a  glow stick from UVPaqLite. I also tried out my newly-acquired rejected prototype Platatac hydration carrier that I scored from eBay, filled with Gatorade. I'll cover that separately, but it served its purpose adequately. TAD Amphibian shorts and my x-strapped (this held them on, but rubbed me raw) Blackhawk kneepads rounded off my regular load.

I kitted out with my Z-E-R-T patch and call-sign tab, as well as another off-market Platatac prototype admin pouch, which I kept a laminated copy of the course map, and a spare cyalume stick in case my team-mates needed some encouragement in dark places, when all other lights go out.

Lastly I wore my GoST Paleo Barefoot PRONATIV's along with their Lining Socks, which, after a 2km walk from parking to the event, 18km of course, and another 2km back to the car, were amazing.

This time I decided to collect loot, and picked up two discarded hydration packs, one I gave to a team-mate, the other I slung, as well as several "technical shirts" and a bunch of gloves. We'll see if any are salvageable.

I had a really good event, it was lots of fun, cold, wet, dirty fun. I feel that again I have proven to myself that I can not only achieve this kind of goal myself, but can also aid others in doing so too. Orange Headband ahoy!

Review: Blackhawk - Removable side plate carriers

If you've been a long time reader, you'll know a few things about me: I'm in Australia, I'm not MIL or LEO, but I have a keen interest in modular, rough and tough gear that I can make use of, and am more than happy to take existing purpose-made kit and modify its usage to fit my own particular need and resources.

I'm fond of armour, having been a practitioner of kendo for 16 years, and LARP type silliness, as well as a variety of adventurous pastimes that might involve a reasonable amount of blunt force other trauma. I've covered both helmets and plate carriers before (like the Platatac MAC, Strike Industries SPC and others). I've also cover lots of pouches, big and small, so when a chance to acquire some modular plate carrier pouches came up, I jumped on it.

More armour, more places, more pouches? yes please.

This is the Blackhawk Removable Side Plate Carrier It comes in pairs, and is designed to fit the Blackhawk 6” X 8” Level IV plate which is a formidable piece of armour that is outside my scope or means, but goes hand in hand with this piece.

So, what is it, and why is it so cool?

Constructed from 500D Cordura, this light but tough pouch is sewn on three sides, with a hook-and-loop mouth at the top, featuring two webbing loops at the lip, to give you purchase to open it smoothly.

On the face and back, PALS/MOLLE webbing runs in a 4x4 grid on one side, and a 3x4 grid on the other, such that the webbing on one side complements the other, rather than mirroring it.

This give you two different fits, depending on how you want to attach it to whatever you are mounting it to.

The concept of these is to give the wearer a pocket to carry a plate, on a vest or rig that otherwise doesn't have that option, wither a Front/Back configuration or a cummerbund that's just "all PALS/MOLLE and no plate pocket". The MAC cummerbund I have does have those pockets included, which as I've covered before, I have filled with polyethylene cutting boards both for space filling bulk, rigidity and also or the blunt-force trauma and stabbing and cutting protection it offers.

Sure its not ballistic protection,  but to be honest, the chances of me needing that level of protection are very slim given my situation, AND its not legal for me to acquire here anyway.

I took one of those boards out and fitted it into one of the carriers, and closed it up. Instant extra armour panel, brilliant. I fitted it first to the cummerbund, and this was where the complementarity webbing came in handy. I could choose to have it ride a little high, or a little low, just by flipping it.

Modular, light and configurable. Nice.

The "removable" part comes to bear as a result of the attachment method. The panels each came supplied with three of the Blackhawk 7 width Speed-Clips which slip in and out of the pouch to the substrate and then clip in to the top and bottom layer.

One thing I noted was that the PALS/MOLLE channels were standard 1" i n the middle two channels, but 1.5" or so at the edges, which when combined, gives you a -5- channel reach, as needed. Again, good for configuring your rig to best fit need and comfort.

Another aspect of this is that you can layer these panels over the top of regular plate carriers, and put an extra layer of armour between you and harms way, in modular fashion, without loosing PALS/MOLLE real-estate.

Here you can see I've put the pouch on the front of my MAC. No reason though that you couldn't put this on a pack, a thigh-rig or anywhere else with 3 rows of MOLLE webbing.

One of the "alternate" uses I thought of was as a admin pocket, for paperwork or other flat items, perhaps a Kindle sized tablet (it doesn't fit my iPad 1), as a thin dump-pouch, or even as a boot to catch a large slung item, like my axe or even perhaps, my Deuce.

All in all, this a pretty neat accessory, even when its primary purpose isn't applicable, having a rugged, seal-able and modular pocket is ALWAYS a good addition to your load-out.

Events: Tough Mudder #2 Melbourne 2013

 I ran the Tough Mudder again this year, January 19th, which was a lovely sunny, breezy day here in Melbourne.

The event was held at the Phillip Island Raceway again, which lays an hour and a three quarters drive from Melbourne, and backs onto the Bass Strait. I had only recently been given the all clear from the ankle troubles of late last year, and had not had a lot of preparation, baring three or four runs, of 2 - 5km, so I wasn't sure about how I would cope, not only with my ankles, or my general lack of CV fitness as a result of my injury, the prednisone treatment (25mg daily, dropping 5mg each week to wean away).

Regardless, I had booked in, and was raring to go. I had tried to drum up interest from the folks I ran with the previous year, but no takers (although it turns out, a couple did the event as it happens).

For those who don't know what the Tough Mudder is, it is a 20+km endurance challenge, with 25+ military inspired obstacles. The events run world-wide, in all conditions, and feature some signature obstacles, namely, lots, and lots of mud, electrical wire filled corridors, and pools swimming under barriers, ice filled pools and all manner of climbing, crawling, and of course, running. I hate running.

The above pics are me before the race, in my running kit, pretty much the same outfit that I wore for the previous endurance event I did, the Stampede with the First Spear OAGRE vest, with my Source 3L bladder in the back, and snap-fixed to the 5.11 Tactical TDU belt, keeping the vest snug to me and my TAD Amphibious Shorts with my trusty Blackhawk! kneepads, which were again, a real bonus, so, "i told you so" to all the scoffing runners out there. You can see me, fresh from the Arctic Enema/Chernobyl Jacuzzi ice bath and dunk, fishing a couple of ice-cubes out from my kneepads. I also wore my iPhone, in its SLXtreme case mounted in the Platatac PRR pouch I got specifically for the event. On my head I wore one of my caps, which I had modified to carry a picatinny rail, in order for me to mount my Contour GPS helmet-cam to, via the Strikemark adapter I have. I also added a chin-strap to the cap, to help deal with the added weight of the camera, which seemed to work pretty well. I wore one of the Under Armour t-shirts from the previous Tough Mudder and my Ironclad gloves.

I also swapped out boots, having put my Altama's into retirement and for this event, I wore my Bates Delta-8's which really held up well, and cleaned up tremendously.

Here's one of me having scaled a 2m "Berlin Wall" and torn my number off in the process. Lesson learned, bring my own safety pins or lashing system. Their little pins were ineffective!

This is me and my running-mate, #7819 :) doing the SHINBASHI salute after coming over the Bale Bonds.

She and I knew each other socially, and upon hearing my interest in a running-mate, signed up, regardless of trepidation and obstacle-shyness. Far better a runner than I, we kept a good pace, she kept me going on the straights, and I helped her along on the climbing, jumping and swimming, crawling and squelching.

She started the race with a black headscarf to match her all-black running slicks. I was referring to us as "day-ops" and "night-ops". My gear was already mud-coloured, and my head higher up, so don't think that I was getting away unscathed ...

We did the course in just under 4 hours, I felt that it was actually a lot easier this year, even without all the extensive running I did prior to the previous events. This may be in no small part to mental preparation, and experience. There were no "I haven't done it before" nerves. I made it over every obstacle on my own steam, climbed every wall, made it across the slippery monkey-bars, made it up the Everest half-pipe on my first run. I was rally pleased with not only my pace, but the speed I overcame the obstacles in my path, but also how I was able to help me fellow Mudders.

Here I am, following the event, having stripped off the OAGRE, sporting my celebratory headband, and working up the guts to pull my boots off. Not a blister, or scratch, but a lot of grit and muddy water. It turned out that the time-lapse application I had hoped to run on my iPhone hadn't begun, but the SLXtreme and PRR combination had worked like a dream. The Picatinny rail I had mounted the Contour cam on needed to be at more of a down-angle, I took a lot of 3/4 sky footage, but see below for my links.

I dinged my shin whilst hurdling a log, and gave myself this exciting bruise on the back of my left thigh. Last year I had two of these, one on the back of each thigh. This year I pegged the moment when I got it ... scaling one of the 4m Berlin Walls, lesson learned? major muscle groups do not make good leavers!

A great event, a good challenge, and certainly a good conditioning and preparation experience.

Will I do it again? hells yes. As many, and as often as I can manage.

http://contour.com/videos/watch/tough-mudder-jan-2013-1-1
http://contour.com/videos/watch/tough-mudder-jan-2013-1-2--6
http://contour.com/videos/watch/tough-mudder-jan-2013-1-4--3
http://contour.com/videos/watch/tough-mudder-jan-2013-1-5
http://contour.com/videos/watch/tough-mudder-jan-2013-1-6
http://contour.com/videos/watch/tough-mudder-jan-2013-2-1--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-2--2
http://contour.com/videos/watch/tough-mudder-jan-2013-2-3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-4--4
http://contour.com/videos/watch/tough-mudder-jan-2013-2-5--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-6
http://contour.com/videos/watch/tough-mudder-jan-2013-3-1
http://contour.com/videos/watch/tough-mudder-jan-2013-3-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-1
http://contour.com/videos/watch/tough-mudder-jan-2013-4-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-3
http://contour.com/videos/watch/tough-mudder-jan-2013-4-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-1
http://contour.com/videos/watch/tough-mudder-jan-2013-5-2
http://contour.com/videos/watch/tough-mudder-jan-2013-5-3
http://contour.com/videos/watch/tough-mudder-jan-2013-5-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-5
http://contour.com/videos/watch/tough-mudder-jan-2013-6-2

Review: Blackhawk! Performance Cotton Pants

Here's a set of pants that I acquired from LEGear, which I must say, I have been slack in reviewing, which says more about my laundry-duties than the pants themselves. I gave this set a fairly reasonable workout, a weeks worth of wear and adventure, and they came up for more.

With both Tactical Baby almost walking and scooting EVERYWHERE, and Triceratops Girl being the most on-the-bounce 4 year old I know, I certainly spent some time crawling through pipes, clambering over logs and obstacles, digging in the veggie garden, chasing chickens as well as looking tidy and professional whilst wandering the server-rooms, labs and corridors of the hospital I work in.

These are some feature packed pants, which were a delight to get into, and find all the options available to me. Here are some of the pockets and what they are good for, and what I used them for.

The main "Angle-cut" hand pockets are deep, and well placed, with flat-seamed edges, to hook and clip pens, money clips and pocket knives to. The right hand side also features a hidden, zippered pocket built into the seam. Good for stowing valuables, papers and the like. The supporting internal stitching keeps it sag-free, which is a great addition.

The front of the top of each thigh has an easy-access, top opening mag pouch, with a hook-and-loop closure. Not humping ammunition around myself, I nevertheless found that they fit an iPhone nicely, or a set of precision screwdrivers, snugly and securely.

The main back pockets are also deep, and sloped to afford easy access and storage, scalloped at an angle rather than vertically as in Levi's. the back right pocket also features a zipperable pocket, to keep your wallet stowed and secure (I still keep mine in my EDC harness but as the weather heats up, I may take this option up.)

 The big cargo-pockets at the bottom of the thigh on each leg also hook-and-loop secure, with two patches on each flap. Each of these pockets feature three wide elastic webbing loops, inside to keep all your needfuls secure and properly oriented. They will fit two TV/DVD remote controls and my Trophy Master skinning knife (just in case, you know?) without even showing a significant bulge. I believe they would suit the designed mag-holding purpose very nicely. As well as the big pocket, the cargo-pockets each also feature a zippered pocket on the inside leg seam, for extra storage, as you can never have too many options. A lanyard loop at the belt loops is another aspect of that.

The pants close with a press-stud and zipper, with secondary botton inside, to give you that extra level of anti-dacking security. A cool feature inside the pants is the silicone grip strip inside the  waistband which kept my shirts tucked in during baby-chasing maneuvers. You can also see here the hidden, elastic waistband slides which kept the pants snug, but gave them some play when bending and kneeling. I really liked this feature. No more pinching!

The pants themselves are made of a rugged wrinkle / fade resistant 8.5 oz cotton canvas, which was double layered in the butt and knees for increased wear and protection. I just threw out a set of pants for tearing through the knee, something I hate. I hate it almost as much as I hate tearing out the crotch, which I do with alarming regularity. The Blackhawk! Performance Pants, however, anticipated this, with their broad crotch gusset, which allows increased movement, less pinching and no snagging of my bling. The belt loops are also generous, being 1.75" wide, to allow easy of feed for rigger belts such as my 215Gear Ultimate Riggers belt. The leg cuffs are also reinforced, which usually isnt an issue for me, being a long-legged as I am, but the 32waist/36leg was a really good fir for me, and when barefoot, the cuffs do actually touch ground, a rare surprise for me.

The only issue I found with these pants is that they seemed to pick up every piece of fluff or dust that I came into contact with. I had thoguht this might have just been because they were fresh out of the bag, and would die off after a wash, but post-laundry (where I remind you again of my general lack of care whilst doing this chore) they seem to have the same issue. Hopefully in a few more washes this will soften up the cotton until it no longer collects crud, and they will look as snappy as they aught to. Rock solid adventure-wear, great storage options, and rugged as all get up. These are pants to see you through some tough times

Review: Blackhawk! Engineered-Fit Shirt

Here's another great item made by Blackhawk, that the folks at LEGear sent my way. This innocuous looking shirt is in fact part of Blackhawk's "WarriorWear" Line, of engineered base-layers. I've reviewed other Blackhawk! gear before, in their knee-pad range, and I have some pants from them lined up to look at as well. You may recall that I have reviewed this kind of shirt once before, and I was pleased to be able to look at someone else's take on the design and application of technology.

Here we go: The WarriorWear Engineered-Fit shirt comes in V-neck or crew-neck, I chose crew, as I like having full closure, keeping all my cat-bell like jinglies tucked in. The shirt is actually made of three distinct regions, in two different fabrics. The torso and biceps are made of a very fine Jersey knit in 92% Nylon, 8% Spandex and the underarm strips, running mid-pectoral to mid-shoulder blade are of a 95% polyester, 5% Lycra mesh. This gives you considerable breathing through sweaty armpits, as well as being stretchy for unrestricted movement.

The seams are all extremely flat, almost inappreciably so, and better yet, are placed off the shoulders entirely, giving no pinch points for packs, harnesses or plate carriers loads to press and rub on. Being a long, tall and skinny critter, I don't have a lot of padding that I can shrug off that kind of thing with, so having the seams off my load-bearing areas was a welcome relief. The material is actually brushed on the inside, to give even better contact to the skin,as this is a wicking shirt, and designed to be held tight to the body, both to draw away moisture, but also to prevent agaisnt-the-skin friction from your load. It is also anti-microbially treated, to help prevent stinky goon syndrome.

I can attest to this, having worn it all day under my it at Manifest overnight, then all day at a kendo instructors course. Kendo is a very physical activity, under both heavy gi and armour. The material kept me dry, chaffing free, comfortable all day, and didn't smell! It's going in my running kit at work

It's important to note, that sizing is really important with these types of shirts. You need a skin-tight fit to gain the most from them. The Blackhawk range of Engineered-Fit body-sculpted shirts (in that they aren't just flat panels of fabric, but are "body-shaped") have specific measurements associated for their sizing. To move from their "Standard Fit" and full "Compression Fit" (for those who want that), all you need to do is move one "size" down. I got myself a "Large" but could have probably done better with a "Medium", as the length was more than adequate to cover my long torso, as you can see here as I demonstrate a "traditional Provencal French salute". You can see there has been no ride-up, helped in part by the soft, next-to-body, jacquard elastic waistband, and the intrinsic stretch of the materials used.

I really liked the smooth, matte-finish surface the shirt has. I've now worn it solo, and under a variety of other tops, slept in it, trained in it and have been dry, comfortable and protected from some regular wear and tear. Definitely worth getting into!

Review: Black Hawk kneepads

Here's some PPE that I wanted to share with you, but had all but forgotten, as it was sitting buried in my gear-bag.  I have had a variety of knee-pads over the years, for rollerblading, Fantasy LRP events and costuming. One thing I've always had issues with is the fit, and having my pads slipping around to the side. I'm going to blame my boney knees and skinny calves for that. Whilst the pads I've used in past have never  spectacularly failed me (especially in some bigish rollerblading crashes) they've rarely been comfortable, and and have either pinched and rubbed or slipped and slid. One thing that occurred to me that perhaps I was using the wrong equipment for the task I was performing. Running about the bush and up and down hills isn't the same as roller-hockey or speed skating. So I looked to tactical gear. Blackhawk! had these Advanced Tactical Knee Pads v2.0 to offer, and I wanted to tell you what I have found with them.

The body is made from sturdy 600D Cordura, which encloses the closed cell foam interior padding. Closed cell foam doesn't absorb sweat or incidental water, for both comfort and keeping the weight of the pads down. The kop of the knee pad is injection molded plastic, which is articulated below the kneecap, with a soft rubber join. This design allows the knee to be bent, without producing much in the way of either pinching of the padding, or gaps opening up in the pad. I was really impressed with this feature, and have found no troubles with the coverage it's offered me. The strapping also deserves some discussion too. As well as the sturdy plastic furniture on the "outside" edge, and the wide elastic strapping which is fitted with long and well placed strips of hook-and-loop, the straps are affixed to the body of the pad, featuring seamed and padded flaps that wrap the padding and strapping around the wearers knee. 

Both the top and bottom straps are well placed and give a good solid attachment, without interfering with mobility overly. A very useful and well thought out additional element of this pad is that inside the kneepad there is a contoured interior ledge of the same closed cell-foam. This sits above the wearers knee-cap, and keeps the pad seated in the right position no matter what I've thrown at it, thus far.  Blackhawk!  offer this in Black, Coyote Tan, Foliage Green, and Olive Drab. I opted for Coyote in this case, and its worked out nicely for me thus far.  I've been happy with the protection these have offered me both whilst out adventuring and my Stargate Lasertag LRP, but also out rollerblading. Rugged, functional and adjustable. A good choice.