Home Front: Battle belt

There is a lot to be said for having a go-bag, get-home-bag or bug-out bag ready and kitted out for those dire-circumstances where you need bare-necessities to make it to a secondary location.  But sometimes, requirement for action is a little less dire, demanding light-weight gear in limited capacity, but needs to be ready to go.  

One such method is to have a battle-belt. In my case I have set out to build a camping/hiking belt that has all the things I might find needful whilst out on the trail or if I needed to blaze one of my own. 

I've been modifying its setup for some time adding things, moving things and testing it on every hike we go on. The current setup has been pretty stable, both physically but also dynamically. 

I've included, hydration, first aid, navigation, fire-lighting and shelter options as well as storage space for other pieces of kit.

I started off with my Heavy Cover 
Titanium canteen and nesting cup in a GGG tactical pouch that I found in my collection. I put this central at the back of the belt for weight distribution. This gives me 37oz (1.1L) of water ready to go as well as a cook-pot and water sterilization (by boiling) method, on my person. Left of the canteen pouch is an older Platatac radio pouch that I use to house a ferrocerium rod and striker combo, a bic lighter, a set of medical sheers and a folding saw. 

So I have fire-making options and fire-crafting options. to the left of the radio/fire pouch is a three-pocket admin pouch where I keep a Sharpie, a pencil, sharpener, crayons a small note-book and space for my phone, as well as space for additional items. Right of the canteen is a Blackhawk Stealth Weapon Catch which holds a Go! outfitters Landing Pad mini-tarp for some single person shelter. To the right of that i have a tear-open GGG IFAK, that i've filled with a variety of bandages, gloves and the like, along with a CAT tourniquet  for extreme bad-times recovery and a Gerber Crisis Hook to round out the rescue/aid pouch.

To the right of the IFAK is a large Kryptek Highlander pattern pouch that contains a 100 foot spool of Go! Outfitters reflective guy-line as well as my emergency IR helmet strobe. I also have a couple of bundled hanks of paracord, one half of a set of pocket binoculars, and an Extac Australia Pocket Shot along with the arrow brush fitting and a couple of bags worth of marbles and bb's as ammunition. 

Finishing up the items carried on the belt is a collapsible mesh sided platatac ld dump-pouch, for foraged or salvaged items, and a horizontally slung ZU Bladeworx Grunt fixed blade knife that sits at belt-buckle level. A very sturdy tool for cutting, battoning and all manner of blade-craft. 

After its first big outing I realized that I needed to add shoulder straps to assist with its bulk and weight, so I rigged up some harness straps with some recycled kiddy car-seat straps.  With a little adjustment, I've managed to distribute the weight of all the items and keep it stable for those long hikes, or short dashes.

The belt that forms the basis of this set up is a Propper 360 riggers belt that has a hook and loop and locking bar fixture as well placed attachment ring for attaching safety lines or other retention systems. This belt runs through an older Platatac 3s belt pad that has PALS/MOLLE loops throughout and suspender loops as well as a breathable mesh padding. 

I think I might upgrade this ad-hoc system to something purpose made, like the Platatac bk harness perhaps, but for now, this whole rig lives in my room on the back of my desk chair, ready to throw on at a moments notice before rushing out to confront whatever adventure or misfortune may come my way.

Anything i'm missing or should add or remove? 

Review: MyMedic - MyFAK

Accidents happen. Burns, cuts, bumps and breaks can come to anyone at any time.  Having a first-aid kit to hand is a vital element to anyones preparedness loadout or lifestyle. Whether you're hiking in the bush, cutting firewood, camping, on a road trip, driving nails in the backyard or hitting pipe in the sandbox you'll want to be able to plug holes and tend to boo-boos to get on with the task at hand. I keep a generic first aid kit in the bottom of my day-bag, and have a small IFAK on my hiking belt, but there are some jobs they just aren't up to and frankly, being stuffed in the bottom of a pack does not make for rapid treatment in a critical situation.

This is where something like the purpose built MyFAK from My Medic comes into its own. Jam-packed with a very comprehensive collection of needful and useful items for treating a variety of ailments and accidental injuries. It does so all encompassed in a tactically minded form-factor. 

 With contents suitable for airway, bleeding, burn, hydration, outdoor safety, sprains and fractures and specialty surgical incident as well as topical treatment, the MyFAK  has packs that caters to both Basic and Advanced First Aid needs. (Available in two different configurations to suit your ability and need).

"By ordering MyMedic First Aid Kits you warrant that you have the required training and authorization to use the medical supplies contained within. MyMedic assumes no liability for their misuse."

  

https://mymedic.com/collections/first-aid-kits/products/myfak-firstaidkit

The 1000D cordura pouch measures 6.5" wide, 7.5" tall and 5" deep, its no slouch. The advanced kit weighs 1275g, the same size basic weighs a mear 975g. The front of the pouch is rigged with 6" of loop field, in 3 2" strips, with a secondary layer of 1" strips straddling these to provide 4 channels of MOLLE attachment, for those of us who like pouches on our pouches or for stowing additional accessories likepens, lights, cyalume sticks or pry-bars. A 1" wide nylon strap runs all the way around the pouch, with a fastex buckle to keep it fully secured to the backing and fully closed> This is especially important as the backing, which features not only two press-stud closure MOLLE straps but the entire back is hook and loop for tear-away capability. a 1" nylon grab handle allows for positive grip and when unbuckled the MyFAK can be torn off your pack, or load bearing gear for ease of access or to pass on to someone who needs it.

The rip-away design makes for ease of access for what is otherwise quite a bulky pouch. being able to get at it without it being strapped to yourself or a pack would greatly improve your ability to get the components you need in a timely and efficient fashion. Crucial in a medical crisis. The fastex clip is no hindrance to access and does a great job in securing the pouch, but it has two easy-grip rubber toggles with medic crosses to pull the oversized zippers open. A lightly hook-and-looped nylon tab acts as a pull tab to assist in pulling the pouch open and holding it spread. Folding down to the front loop fields to stow out of the way when not in use.

The pouches hook field backing also means once removed it can be stuck to other loop-field surfaces at your leisure.

Opening the pouch up reveals its Tri-Fold Design

MyMedic created this pouch to give you quick access to your First Aid Supplies. This tri-fold design makes it easy to see what you need, when you need it.

Working from the innermost layer forwards the front the back panel has three Elastic webbing loops to contain items, a mylar space blanket, a hank of paracord, a cyalume stick and a RATS tourniquet. Behind that are two pockets with bandages, including quick-Clot and a chest seal. The back most pocket has a hook and loop  closure tab to keep it closed until needed.

The middle panel has more elastic webbing securing more bandages, irrigation saline and suture kits. An additional pocket behind the elastic webbing holds a compressed compression bandage.

I'm really impressed with the amount of material squeezed into this kit, both by clever arrangement of pockets but also arrangement of items. I was tempted to reorganise the kit but quickly recognised I wasn't going to get it any better packed or sorted.



The third section of the internals is the zippered mesh lind pocket panel. It is filled with small items; medications, electrolyte sachets, swabs, lotions and gloves. The section is itself a tear-away as well allowing you to pass it over or just get at it without disturbing the rest of your pristine supplies.

Whilst the rest of the kit is full of bandages, burn kits, and hole closers, the medication pouch holds pain killers, anti-inflammatories, anti nausea and anti-dirorrerals and electrolytes. The mesh panel allows the plastic pouch wrapped medications to be rummaged through. Good if you find yourself off-Oregon trail and not fancying dying of dysentery.  The flip side of the medication pouch provides a smooth field for laying out items: bandages, sutures, tweezers and such as you work on your patient, or just as a cover to prevent debris falling in your kit.

So, apart from being jam-packed with all kinds of goodies and needfuls, being well put together as far as design and layout, and having an excellent quick-release and access options go, this is an excellent First Aid kit.

I find it a bit bulky and heavy to put on my person, say on a battle-belt or on a plate carrier, except maybe on the back. Personally I feel it's suitable to go on a pack, or on a dedicated medic's harness. One thing I saw on their webpage and successfully tried myself was fitting  it to the headrest of my drivers-side car seat. Putting it in easy reach for shot-gun or back seat passengers should the need for road-side assistance come up.

Secured by its Molle straps, to the headrest prongs, it can be accessed by its quick release Fastex clip and pulled free by the webbing drag handle. If needed it could then be reattached in an upright position and unfolded to access its components in a secured place for out the door or back seat triage as needed. Perfect for on-the-move treatment. 

I have a Cert 1 in first aid which is basically: bites, breaks, bleeds and burns and I feel the contents and setup of this kit is more than adequate for my needs, and beyond what I'm trained for in its Advanced format, but not beyond my ability in extremis.

Movie review: Viral

I had a early-to-bed, doing work-from-home, kid-free evening this week, so got to watch a movie of my own choosing. It was pretty cool. Not the movie, getting to choose a movie. Actually, I choose the movies fairly often, but this time I didn't have to take anyone else's interests in account. So I chose one that seemed to be near to my heart. A infectious disaster zombie movie! Yay!

End of the world movies! With science, and zombies. Yay.

 The movie I selected was "Viral" a 2016 straight-to-DVD, as far as I can tell. Here's the basic synopsis from IMDB...

Emma and her sister Stacey are normal teenagers in a small town, when a mysterious infection begins to spread. With the town quarantined, and their parents stuck on the other side of the barrier, the girls have a blast eating junk food and sneaking out to go to parties. But when the disease starts to infect people they know, the girls, together with their neighbor Evan (Emma's secret crush), barricade themselves into their home.

But it may already be too late, as the infection is already in their midst, and Emma will be faced with a choice: protect her sister or survive the virus.

The infection, it turns out is NOT a viral infection, its a multi-cellular parasite, a nematode. A worm. Brain worms! This bothered the scientist in me, as the damn title of the movie was misleading, like if "The Lion King" was about the king of leopards.  However, they did some pretty cool stuff with the premise. Making comparisons to the fungal brain zombie ants,  the "eat me, eat me" behaviour in Toxoplasma infected rats and the flesh burrowing botfly maggot, the disease is spread by a bloody cough from an infected person, victims who become more an more aggressive and essentially, zombied as the worm interacts with the brain.

As a zombie survival film, it was really good. Government intervention in the form of military isolation, martial law, CDC quarantine with spot-checks, house-confinement and eventually, internment and "sweep-and-clean" roundups, followed by liberal airstrike-firebombings.

The disease/parasite aspect was not badly handled at all, and apart from a bit of "too smart / controlling" suspension of disbelief being required, it also had some really good aspects. The infected became blind when the parasite took over, relying on hearing to guide them to new victims which was a nice touch.

The quarantine included delivery of CDC goody boxes of MRE's and survival gear.  Flares (used to signal the military in the event of an infection in the early stages of the outbreak), face-masks and poncho's (for preventing / reducing he risk of contamination) and the like. It was also good to see "we are prepared for this kind of thing" reactions from the populace: under-stocked cupboards, closed and emptied shops, early evacuees and armed cordons. All good things to expect from a dangerous outbreak.



I really enjoyed the movie from a disaster preparedness and response perspective, only had a few "nooo! shut the door, what are you doing?" moments from the kids, and apart from the one or two bits of "hive-mind/pseudo-science" junk, it was remarkably believable and internally consistent.

 It really held the tension, and bleak prospects of a widespread, martial-law enforced (and out of control) quarantine as well as the worm-zombies. Well worth catching on your local streaming movie network of choice.

Re-Blog: how to remove a fishhook

This was a very interesting piece I saw, from the Walden Labs who offer "Solutions for Self Reliance" which I wanted to share with you all. I've reblogged from Walden Labs before, they have great content. For those of you who have ever been out fishing and are a bit of a klutz, there is the very real chance that you might have stuck yourself with a hook.

The folks at Walden labs found this clip from Total Fisherman which demonstrates five different ways of removing fish hooks that are buried deeply in a persons body. Total Fisherman goes as far as really hooking himself to demonstrate these techniques.


Warning: If you don’t like seeing fish hooks going in and out of skin don’t watch this video.





Published on Apr 24, 2013, he buries and removes five fish hooks from my hand, arm, and leg, to show us whether or not the "best" fish hook removal technique actually works.

It appears to be working by securing the base of the hook as firmly as possible, against the body, and after fitting a larks-head knot to the hook end  and with a quick jerk, aiming to yank the barbed hook out with the tension in the metal itself.

Normally this is pretty bad-first aid advice, to pull a penetrating object out, and there is always a risk that pulling a barbed hook out will do more damage, however, in a field expedient situation, this is probably a better solution than trying to push the hook all the way through and cutting it.

Wish Lust: off-road vehicles

I was heading home from work, and I went past this vehicle, parked in the parking lot entrance of an apartment block, and I was so impressed that I wanted to snap a few pictures and tell you what I thought about it. There has been so much done to the set-up that I couldn't even tell what the original rig under it was, but it has a fully enclosed tool and storage locker suite, with four lockable cupboards, two of which were vented, possibly to house pig-dogs or some such. Big off-road tires, with two spares on the back, as well as dual front and back dynema cable-winches, and a heavy-duty jack .

An awning canopy which looks like it might be a full tent version  was fitted to the roof, as well as a roof-rack full of camping and bedding gear like bed-rolls. Packs set to the back of the spare tires give even more storage, though probably not for anything too valuable. Might even be solar shower reservoirs. Extra LED lights, running-boards, a snorkel, a big cow-pusher and a heavy duty suspension upgrade finish off what looks to be a very impressive off-road and off-grid setup. It made me envious!

My own little Toyota Rav4 AWD is rather soccer-mom in comparison. Given that I don't do much off-roading, other than getting to and from some pretty family-friendly camping sites and the occasional trip to the snow, I don't really have much regular excuse for a more workhorse set up, other than in the interests of preparedness. Family utility won out when I got this vehicle. That said, I do keep a variety of useful and important kit stowed away in its Millennium Falcon like storage bays: 

First Aid kits, my in-the-car Bug-Out-Bag, a pretty comprehensive tool-bag, rain-gear, Hi-Vis gear, oil, fishing rods, jumper-leads, a hatchet, some really neat collapsible fishing poles and a tackle box, as well as my trusty Stetson all live stowed away ready for any emergency that comes up. I also have a Hercules Off-road Recovery kit,  which isn't pictured. I also have two removable roof-racks, which strap on to the top, through the door-frames, and give me instant top-side storage when I have even more to load. 

These originally came to let me haul my AquaYak tandem kayak, but have been invaluable camping and both salvage and shopping. Given the size of our family, I often ponder that I would have been better served with a people mover, but the Rav4 has served me well. The boot by itself is spacious and lets us haul a whole lot more than you might expect. It would be awesome to one day have a decent rough-riding, off-road, Mad Max worthy vehicle, and I know one of my friends recently got an ex-Army Land Rover Defender  which will make an excellent bush-basher, so I know its possible.

Disaster Shopping Event: Kathmandu trip

I was wandering the streets recently, and passed one of the big-chain outdoors stores with a sale on, and thought I'd pop in to see what was what.  I thought I might do a new thing for a spot. I wandered around and found 6 items that I would want to grab and go with if a disaster was imminent. This wasn't a very well thought out thing, and I might do it differently next time, but the premise was: "if SHTF whilst out strolling, what would I grab and go with, right now". I had parked my car only a block away, I had my family with me (Omega, Lorin and Tactical Baby), so we already had a reasonable EDC and BOB capacity on-hand.

Dynamo Radio which gives you a portable and personally powered connection to the outside world, at least listening in. The Radio is recharged by turning the crank for 90 seconds (providing approximately 40 minutes of playback). It also features a torch, clock and alarm. It carries a IPX6 "Splashproof" rating, and even features an earphone jack (reducing your noise signature, and reducing power consumption).

 An internal rechargeable battery pack (2.4V/300mA) powers the radio two LR-44 button batteries run the clock, but it can It can run off AAA 1.5V batteries or be powered by an external DC3V adapter. It has a pretty standard frequency range (AM 540-1600KHz, FM 88-108 MHz). It weighs 200g and is pocket sized.

Phantom MTB v4 hydration pack caught my eye as a carry-it-all.
Lightweight & simple, with enough room for the essentials required for a short trip if we had to hump it. Its design encourages airflow & comfort, with airmesh harness and backing and and adjustable straps. It features a multi-tool organiser, waist strap for secure running or climbing, reflective come-rescue-me flashings, and is 2L hydration bladder compatible. It's construction is of some very lightweight materials, the main body being a P600D Oxford, the trim a N420D SC HD and the lining N210D Oxford, all materials are double polyurethane coated for waterproofing.  It weighs only 390g and this is telling, it's a pretty flimsy pack, compared to the usually mil-spec bags I'm used to, but it would have work well enough for what

With more storage and salvage in mind, as well as contamination reduction, I spied a
Dry Sac 3-pack, which would meet that need. Constructed of a light but tough 30D diamond patterned nylon ripstop with polyurethane coating. The three pack comes in three sizes: Large 48cm L x 33.5cm W, 8L capacity, medium 38cm L x 26.5cm W, 2L capacity and small 28.5cm L x 20cm W with 1L capacity. They are lightweight, durable, and water resistant with sealed seams. I really like dry-bags,  Its just a matter of stuffing them, rolling down the top a minimum of three times to cover the flap and folding back and clasping the Fastex buckles.

I also saw a pretty good little pocket sized Survival kit in a find-me Safety-Orange case the case's contents: Pencil, Waterproof paper, fire steel and striker, cotton wool (2pcs), button compass, whistle, survival mirror, Wire saw, a small multi-tool, snare wire, fishing kit, salt sachet (2pcs), safety pins (2pcs), duct tape, zip-lock polybag, braided nylon cord and a carabineer.

It's only 12cm x 10cm and weighs 186g, so would be a very quick way to bolster a survivors kit on short notice.


Power and light are key elements for even short term comfort in a disaster situation ,and can greatly improve morale which is where something like the LuminAid come into play
This is a solar powered, inflatable LED light, with a waterproof (IPX-7) solar cell, battery and LED lantern, which is housed in a PVC-free balloon, which makes it buoyant, and dissipates the light evenly, making it a lantern rather than a flashlight. The battery is fully charged after 7 hours of direct sunlight, and can retain its charge for up to three months, before needing a top up. 

It has two light settings, a 15 lumen glow, with 12 hours of illumination, and 30 lumens, with 6 hours of charge. The bladder is blown up by a valve, the same kind of valve seen on pool toys world wide. At 77g this is a simple innovation that would go a long way to driving back the chaos after a disaster, especially in a family situation. 

A second light also caught my eye, this time as a communal power source as well as light source. The Power source lantern has a Cree R5 LED 3W light with four lighting modes: high – 150 lumens; medium – 75 lumens; low – 13 lumens; flashing, with corresponding run times: high – 6 hours; medium – 12 hours; low – 94 hours. The lantern also features a USB output which can be used to connect and charge your digital devices as a power source. It features a rechargeable Li-ion 3300mAh battery offering DC 5V-1A Max output. 

The lantern can be placed on its base, hung by its built-in hook, or attached to metal via powerful built-in magnets. It also features a battery indicator and has a  IPX5 splash resistance rating. Being able to keep a phone charged can also be really useful and potentially life saving survival tool.

So, there is my quick summary of six items that caught my eye that I might grab, if I happened to be passing near a Kathmandu store in the outbreak of a sudden disaster. 

Events: Nagasaki 70 years on

What if the 1945 "Fat Man" bomb was dropped on Melbourne today?

Following on from my "Trinity Day" post a few short weeks ago, a chilling reminder. It is now 70 years ago since, on August 9th, 1945, at 11:01:47am the Fat Man bomb exploded some 500m above Nagasaki, Japan, outright killing between approximately 39,000 and 80,000 people. The blast was estimated at around 20kt, and it set fires through the mostly wood and paper construction of the city that left it devastated, even before the radiation effects began to manifest.

What if a 10kt "dirty bomb" was detonated in downtown Melbourne?

Some very clever people at Stevens Institute of Technology, namely nuclear historian Alex Wellerstein developed  “NukeMap” which allows you to overlap various atomic and nuclear events over a regular GoogleMaps view. You've seen this kind of effect with the Sea-Levels which I discussed in my Rising Sea-Levels post. The NukeMap application demonstrates the estimated (and extrapolated from actual tests) effects of these weapons on built-up areas, including "Fireball radius", "20psi Air Blast radius", "5psi Air Blast radius", Radiation Radius" and "Thermal Radiation Radius", each with a descriptor of the kinds of damages you could expect to see, and survivability of those effects.

What if the currently deployed 800kt Russian "Topol SS-25" ICBM munition was dropped on Melbourne?

It also then overlays that with estimated population density in the areas covered by the various zones, and estimates immediate fatalities, and injuries. For explosions of either sufficient size, or proximity to the ground to kick up fallout (high air-busts hit harder, and wider, but don't kick up as much fallout, it's inefficient to do so, apparently), NukeMaps will also plot prevailing winds and density of fallout.

What if the currently deployed 800kt Russian "Topol SS-25" ICBM munition was detonated in downtown Melbourne?

You can pick your location, and from a variety of historically documented devices, from the North Korean tests, Pakistani and Indianweapons, the Trinity and WW2 bombs, all the way up through the Cold War era tests and production weapons, from estimated improvised terrorist weapons to the state-irradiating Tsar Bomba weapon.

Its a very sobering tool to visualize both the destructive capacity we have been capable of for the past 80 years, but also as a reminder of how fortunate we are to have only ever had these forces brought to bare in anger only twice.

Review: Platatac - S&M Side Opening Pouch

I follow a couple of gear swap-buy-sell groups online, and every now and then something comes up that piques my interest. The last time was my Condor Plate Carrier, which I've enjoyed running in at a few events, and was value for money second hand, for my purposes. A bonus from that deal was the carrier had a couple of extra pouches that the guy "threw into the deal". One of these was the pretty recent Platatac S&M Side opening pouch. I hadn't thought to get one of these of its own merit, but having had one in my collection now, I can see this may have been a mistake.

One of the first things I noted was that it looked quite different to my other Platatac pouches, which mostly run into the magazine pouch category, but certainly had the same quality of construction that I'd expect of their products. Constructed of 1000d Cordura, and double stitched throughout. The big-enough to be strong, small enough to keep grit out No.10 YKK zipper wraps around three of the four sides, but interestingly, not top to bottom, but from the side. The twin zipper pulls are equipped with nylon extenders which are grippy, but snag-free.


One of the things I really liked about this design is that the front panel has a broad lip, that can completely wrap over the zipper, giving you a fully Cordura enclosure, even of the pouch isn't fully zipped up, and eliminating rattle, and giving further dust and water protection. Inside, the pouch measures 15cm (6") x 10cm (4") x 4.5cm (1.75"), giving you quite a lot of capacity for personal electronics, like a GPS unit, strobes, a survival tin or small medical kit, or even snacks or drinks.

The internal of the pouch only has one feature in particular, a wide, broad band of elastic webbing, too big for the strobes I have, but perfect for a 600mL bottle sized item. No extra flaps, pockets or anything to get in the way. One thing that was obvious though is that all the seams were really well finished off, no bare edges or seams to catch or fray. The non-zipper side features a big chunky drainage grommet, which even though it's on a vertical face, gives a good headphone jack access point, or dummy-cord lashing point.

Attachment is via twin channel PALS/MOLLE straps and takes three rows, to give a pretty solid connection. The "handedness" of the pouch is simply governed by flipping the way you attach the pouch, with the PALS/MOLLE connectors feeding "up" rather than "down" to have the opening side either way. I've been using this pouch on my baby-poo khaki-green gear, and Multcam, but threw it onto my black pack for contrast, but really, it's smooth lines and snag free profile don't really make it stand out. Perfect for all your small S&M needs. Cuffs and gags, anyone?

Review: ITS ETA (Med kit (basic)

As first seen (well, apart from a teaser) on Breach, Bang & Clear .... 

I was so excited to see this tucked away in the corner of my Propper package, because I've had a lot of trouble trying to get one sent to me, due to the specific rules surrounding selling the Z-Medica QuickClot Combat Gauze  as an export.

This is the ETA Trauma Kits in Fatboy which is designed to fit into the ITS Fatboy Trauma Kit Pouches, but can also be either sealed or broken down for easy access to the individual components, or stowed as is, in its heavy duty vacuum sealed ziplock bag. They’re also well suited for cargo pockets if you’re not going to be keeping it in a pouch for storage.


The ITS team who put their expertise together to develop the kits select every item in the ETA Kit carefully to complement the others and serve multiple purposes. They make several different versions. The Basic, Standard and the MIL/LE ONLY version, as well as new International version, with concessions to Z-Medica's export policy.

Here's what is in the kit that I received, the Basic, with a stock photo from ITS, as I didn't want to pop the seal on mine (bad reviewer, I know).

Basic Contents

• QuikClot Combat Gauze LE (1)
• HALO Chest Seal (2)
• Pressure Dressing (1 — 4″)
• Elastic Bandage (1 — 4″)
• Z-Fold Dressing (1)
• Combat Casualty Card (1)
• Nitrile Gloves (1 Pair)
• Pencil (1)
• Contents List w/ TCCC Care Under Fire Instructions (on reverse) (1)

 The kit is sterile when sealed (which is why I didn't want to bust mine open), and ITS also stock an "inert" training version, for those who want to train how they fight, and fight how they train.

The slightly more substantial "Standard" kit also features

• MojoDart Decompression Needle (1)
• Nasopharyngeal Airway (NPA) Adj. 28fr (1)

Which are a couple of things you'd really be wanting some medical training before using, thats not just patching boo-boo's and plugging holes.

The MIL/LE ONLY replaces the Basic/Standard QuikClot Z-Fold Combat Gauze LE with the more specialised Z-Fold Combat Gauze (w/ X-Ray Detectable Strip — Green Package). The International Kits feature an international version of QuikClot Gauze.
The FatBoy med kits hit very snugly into a two-magazine Platatac FUP pouch which is my gold-standard for pouches, but has an easy-access fit in their slightly larger WUP pouches.

I will be packing the ETA FatBoy with me on all adventures from now on, and it's a good reminder for me to chase up refreshing my FirstAid certification too. This is a great kit, dense, well thought out and packaged and appointed. Lets hope I never need to stop a sucking-chest wound, but if I do, having a kit like this might well make all the difference.

ITS also stock all the same contents in their "TallBoy"kit but stacked long, rather than wide, because it's not always about girth. If you really just need a pocket-sized pal, the EDC Trauma Kit might be more your style.

If you don't feel you'll often be responding to trauma, but rather more minor injuries, you might consider the ITS Boo-Boo kit, or, if you're like me and have multiple kids, and occasionally stab yourself in the leg with a sword, the slightly larger Boo-BooPLUS kit might suit your needs. 

Wish Lust: Platatac - BF pack

Early last year I popped into Platatac HQ in Hallam and shot the breeze with BDC himself. He took me through the warehouse, and the factory, where all their in-house kit is constructed.

One of the things he showed me was the then as-yet unreleased BF Pack,
and I was pretty impressed. I then saw them again having been given prominent display at the SSAA SHOT Show this year, and whilst I haven;t managed to pick one up myself, I wanted to get a bit of a Wish-Lust review out there for you all, as they look like a really innovative pack.

The BF pack is designed as a short patrol pack, with key features to cover a variety of soldiering needs.

It would provides every soldier with a personal TACEVAC litter, SSE bag and room to enhance mission capability as needed, according to Platatac.

The main feature that sets this pack apart form anything I've seen previously is a lightweight TACEVAC litter, capable of carrying a soldier and his equipment, out of harms way for further treatment, built right into the pack.

Pic swiped from Platatac

The pack itself is comparable to that of other short patrol packs like the Propper UC pack I recently covered , measuring 46cm (18") x 27cm (10") x 9cm (3.5") internally but encompassing an expanding  SSE pocket allowing quick stowage of documents or extra equipment to further your load capacity. This is stored away behind zippered flaps, and cinching compression straps and topped with a hook-and-loop cover flap to keep it secure.

Pic swiped from Platatac

When those straps are unhooked, I wonder how well the fabric of the SSE pocket holds up against the load of the front of the pack, but with it, I've no doubts.

An ADDITIONAL kangaroo pouch beneath the external cover flap will take a triple shingle or insert for extra mags/medic supplies or other similarly sized kit for even more sustainment in the field.

Clever design also adds a pocket for hydration bladders to be stored behind the cord-locked SSE pocket.

Pic swiped from Platatac

The pack also features a small 3 row, 5 channel PALS-MOLLE covered external admin pouch with a two internal mesh pocket allows you to store and have easy access to essential documents, gadgets, spare batteries, cyalume or whatever kit you need to have on-hand when out and about. There is no shortage of storage in this pack, and that's even before you look at the main compartment.

Pic swiped from Platatac

Internally the main compartment is fitted with full PALS-MOLLE webbing, all of which is also loop-field for taking either permanently attached pouches, or "tear-away" ones. the "back" is fitted with 7 rows of 6 channels, and the front lip has 8 rows of 6 channels. The whole thing clam-shells for ease of access to everything stored.

I must say I really prefer this over the all-loop/no MOLLE lining of the Propper UC pack, as most of my internal carriage would be permanent pouches. There are three zippered off internal pockets, one on the back, and two on the front the back one being big enough to take a 3L hydration bladder. Two ports give hydration tube / antenna access points.

Another cool feature is the wire fed Quick Release System (QRS) built right in. Feeding the included wire through the built in loops, and the back of a plate-carrier, or a larger pack, you have the option to with a yank of the top handle, release the back and have full access to its features. 

This makes utilizing the built in and lightweight TACEVAC litter, which is designed to be capable of carrying a soldier and his kit,out of danger. I checked, and Platatac don't recommend using it as a hammock, it's not designed for that. The two sides of the litter stow away into hook-and-loop closed inset pockets, and are accessed by simply pulling away at the tabs. The pack straps can even be stowed away in the top pocket when the QRS is employed.

All in all, from the twin side carry handles, to the use of the same quality materials and hardware I've come to expect from Platatac to the level of detail given to not only carry capacity, but also clever storage options for all the loads, the BF pack would be a good step up from my old favorite the Bulloch Echo even before the addition of the litter feature.

I really hope this kind of system makes it's way into regular use, I can only imagine the benefits to those putting themselves in harms way to have a fast and effective way to deploy a TACEVAC system like this.