Showing posts with label paracord. Show all posts
Showing posts with label paracord. Show all posts

Thursday, February 16, 2023

Review: ChinLin spade trowel


Whether it's putting in crops, digging up a secret-squirrel cache, taking care of some business in a back-woods latrine or just some old fashioned fox-hole digging, having  a good digging tool comes in very handy and saves the old fingernails. I have a couple of folding entrenching tools in my camping/bug out kits, but even compact as they are, they can add a bit of bulk and weight. Sometimes they're even a bit too much tool for the job. A full-sized e-tool will make a big Dakota-fire hole, where a trowel sized tool would be more economical. I love multi-function tools, especially when they don't add function at the expense of the primary function. 

This little beauty is the ChinLin HW-901 spade and I originally picked a couple up on Wish.com but it looks like they are no longer sold there. I did find them on this Indonesian clone ( buyer beware). What it is is a 26.3cm ( 10 1/3") trowel with a para-cord wrapped box handle. Made from a  single piece of 420 Stainless steel, the handle has been welded along the middle of the upper face, obscured by the cord wrap. The trowel has a sharpened edge around 3/4 of its edge, with the final quarter being a serrated saw-edge. The spoon face of the tool has a nail puller cut in as well as a set of four hex-head wrench cut-outs. 

The edges aren't super-sharp but they're sturdy enough to chop with, which will be good for clearing brush, weeds or stubborn roots whilst digging. Weighing in at only 80g (2.8oz) it's not going to cut it as an axe, but it makes for a lively and light digging tool. The sharp edges and serrations do make digging through turf easy, and the tool-cut-outs don't effect digging and scooping output significantly.

There is a 7cm ruler printed on the inside of the spoon which is  a nice addition. The pressed steel has a spine ridge pressed in for stability and the tool is very stiff, which makes it very good when sawing or prying (splitting cracked wood or perhaps stone), especially handy when pulling nails with the nail puller or applying torque with the hex wrench holes. 

The cord-wrap is made of 290cm (9'6") of paracord, secured to the handle through four sets of holes drilled into the sides of the handle, and terminating in a lanyard loop at the bottom end. The handle has a slight taper which keeps the cord from sliding off either ends. 

Those side lashing holes and the hole in the spine of the spoon near the handle of the tool can also act as attachment points to fix a pole fitted into the hollow handle, either acting as a extension to the handle, or to turn the tool into a spear. 

The tool comes in a hand if pretty flimsy nylon pouch with a belt loop. I've found it very useful to have on hand when picnicking or hiking. The pouch keeps the sharp edges secure. 

I bought one for myself as a tactical hand shovel, and another for my veggie-garden planting partner. We've both put it to  good use and they've never failed us. 


Panjang Handle: 10.4 cm



Sunday, April 26, 2020

Review: County Comm - Minnow Gripper

String, rope and string accessories. I like them. One such accessory that caught my eye was the Minnow Grippers offered by gear treasure source County Com.

What are they ? They are tarp clips. Clipping onto tarps to provide an anchor point where grommets don't exist. They can be used to hold onto and fasten plastic sheeting, drop cloths, tarps. canopies, awnings, pool covers, towels, BBQ covers, sails, cables and bags, netting and hunting blinds. All manner of covers you don't want flapping about.

 These clips clamp down on a surface  by means of  a two piece jaw which closes on the surface with friction locks on the back end of the scissor arms, much like those found on locking forceps. The jaws of the Minnow are cross-hatch grooved to provide "teeth" by which it holds fast  to many materials.
Made from molded fiberglass reinforced polypropylene, the Minnow is a dense and sturdy piece. The central pin has a over-hang lip and channel to feed through at full-open position, otherwise holding the clip together with little or no lateral movement. The jaws themselves open wide enough for clamping materials up to ¼" thick and the molded locking teeth have 6 positions to allow it to cinch down onto material in increments for a very secure bind.


At the back of the jaws, behind the "teeth" where cables can be secured without damage from  the teeth. This gap can also hold paracord to create a perpendicular attachment on a running cord.  Either in the locked teeth or in the gap behind the teeth in a sliding configuration.   The material is reported to crack resistant to 35° below zero (-37C). it is chemically stable and resistant to most solvents and marine conditions.

The tail end of the Gripper features a hefty hook on each arm for capturing cordage. the tips of the hooks are double wide, matching the maximum width of the Gripper. This means it is stable and flat on it's side. the base of the hook features a hole which is a perfect match for standard paracord, but will also accommodate thicker cords, especially if they compress a little. The hooks are 15mm deep and are angled, providing a depth of capture to reduce slippage of cord coming loose in vigorous flapping.

The twin tail hooks allow cordage to be looped over, one, the other or both hooks as the need arises or situation permits. Fixing one guy line or two or rigging  a single cord perpendicularly from the clamped material. The twin hooks also allow for some creative knot-free attachment, not unlike those possible with the Fishbone and Piranha knotless ties. Forces pulling back on the Minnow will act to tighten their grip , with an action not unlike squeezing on a pair of pliers.

The locking teeth of the Minnow Gripper first engage at around 9mm (4/10") at the tip which is about 6mm at the " back" of the jaws. That puts the maximum thickness of material they can close on, but each Minnow Gripper is purported to hold 175 lbs (80kg) whist only weighing 0.35oz (10g).

I haven't tried this for max weight, but the sail-cloth awnings I strapped down with it flapped a fair bit in the wind overnight without coming loose. That seems fit-for-purpose to me. Not a single Minnow came loose, in several configurations. I'm quite pleased with the utility, form factor and ruggedness of The Minnow

 
They come in two colour options: Tactical black and Coast Guard Orange. I opted for dont-loose-me orange for my 8. (two tarps worth) half od which I store clamped to my redoutable Mystery Ranch 1DAP  it's my regular day to day and Get Home Bag  so it seemed apt to keep some there too.

Tuesday, August 13, 2019

Review: ITW - Tac-Toggle

Continuing on my theme of cordage, I bring you the ITW Tac-Toggle. Toggles being one of the more ancient button options available to us it'as no surprise that the sharp eyes and nimble hands behind ITW have taken it from antler-tip, bone and stick into the realms of ballistic nylon.

So, what is it? A taper ended cylinder, with moulded-in notches and two holes in a recessed channel. All up it's just 1 1/2" (40mm) long and 6mm x 8mm thick. The holes are sized to accommodate paracord, but it's a snug fit and I found that melting a cut end to taper it to facilitate feeding it through. Thinner cord feeds without any issue and can even be pinched and fed through as a loop to fit to a strung line "on the bight".

As a line ending stopper on paracord, it's just a matter of feeding the line through both holes and feeding it back into itself.  This forms a very sturdy lock and uses very little cord, less than a stopper-knot for sure. The looped cord lays in the recess and holds the toggle perpendicular to the cord. 

As a stopper, the perpendicular end-knot only makes a sturdy gripping point between the fingers held in a fist, but also as an anchor. The width of the Toggle makes it very suitable for holding items in place through PALS/MOLLE channels. Feeding it in is as simple as turning the toggle 90 degrees and slipping it down through the channels. It is snag free and quick to deploy and detach whilst simultaneously being a sturdy attachment system without needing to tie paracord into the MOLLE directly.
Another way to feed cord into the two holes not as a stopper but along its length, such that the toggle lays parallel along the line and sits in place allowing the toggle to act as a hitching point for other lengths of cord. Pulling a length of line through the holes gives you loop of cord to hang things off, a series of these would give you a daisy chain of attachment points for all manner of gear. 

Simply having a toggle at the end of a line can also enhance the pull capability of cordage, with an improved grip on a toggle between the fingers over a knot or just bare cord. good for dressing lashings, hauling loads or compressing bundles. 


So, as well as securing things to to PALS/MOLLE  and acting as a tie-off point or tensioner on  guy line, I use one of the toggles to secure my wallet. I run a length of paracord from my  Hazard 4 Loader harness and have previously just used a stopper knot to secure it through a hole in the middle of the bill-fold section. I replaced the stopper knot with a Tac-Toggle and my wallet has neither slipped loose nor become dislodged. It also means I have a spare toggle in my EDC in case I need to work some cordage. It also wouldn't look out of place

All in all for a small piece of kit I'm impressed. It brings form and function, and the simple elegance of an ancient device in a modern format it brings  a lot to the table.

Fit two and you've got anchorage for a bow drill, or grips for hauling a sled up a hill. Fit one to a line and feed through a button hole for an unobtrusive  "deep carry" for a SERE kit like the Oscar Delta SPD




Friday, August 9, 2019

Review: NiteIze - CamJam

I love cordage and carabiners, and always keep an eye out for new systems. One such was coming up in my social media feeds were the CamJam Cord Tightener from NiteIze Innovation. The device is simple enough. a High-Density plastic hook, with a sping-wire gated closure, a cord feed hole, and a built-in toothed cam for binding and locking the cord under tension.  This particular version of the Cam-Jam is suited to 1/16th' (2mm) to 3/16th" (5mm) cordage and its feed hole is sized to accommodate this.  It weighs only a slight 1.69oz (16.00g) and measures 2.70" (68.57mm) x 1.35" (34.30mm ) x 0.58" (15.34mm).  The cam is a tear-drop shaped piece of the same material as the rest of the clip. It has a hollow on the underside which friction lock onto a knob on the body of the clip. A tensioning bar at the rear of the clip fits into a ridge on the back of the cam, presses the cam into the body.

 
On the "back-side" of the clip where the cord feed hole (the "eye") comes out has a channel to guide the cord "downwards" away from the clip. this ensures the standing end of the cord is held in parallel with the cam. This, in turn, maintains pressure on the cam, reducing lateral slippage on the working end.  This is important as the teeth of the cam are not especially aggressive nor is the tensioning bar especially tight.

The CamJam works by having anchored cord fed through the hole and passed beside the cam where the hole is, the clip end can the be clipped onto whatever it's being fixed to. The working end of the cord can be pulled taught through the eye and "set" with the cam. 

NiteIze recommends fitting some kind of stopper-knot on the working end. and I think some kind of hitch on the bright is the best way to go, to prevent total failure, should the cam-slip. Which it does, quite a bit.
One thing I found was that the Cam Jam did assist in belaying the line in order for me to set a more secure knot in place, such as a hitch on a bight or a truckers hitch. The "eye " and feed channel feature are useful regardless of the reliability of the cam and the spring wire clip of the carabiner might be light-duty but the whole unit is. It's not climbing rated, which means you don't want to put your life on the line with it.  
Have a bundle of firewood to haul? have a tarp or tent fly to secure? This should do the job. Need to lash the escape ship to a pier? Get a heftier tool. 

The CamJam Cord Tightener features the strong plastic body of a carabiner combined with a locking cam mechanism for a knot-free way to tighten, tension, and secure light loads. The CamJam can be clipped to fixed anchor points and the cam mechanism will lock cord in place with the desired amount of tension.   There is a smaller version of the Cam Jam, the CamJam Mini is meant to be used with cord 1.8mm - 3mm. Which is to say, dummy cord, hootchie cord  and guy lines and only weighs 0.18oz | 5.00gand measuring only  a slight 1.75" (44.60mm)x 0.90" (22.63mm) x 0.37"(9.50mm) but smaller and lighter doesn't really equate to stronger and chunkier, though the smaller cam does bite quite well on the paracord.


Wednesday, April 18, 2018

Review: Range - Treeo hammock

An innoxious bundle concealing great potential
main sheet, tree-straps and guy-lines unfurled
My idea of ideal hanging out  usually revolves around a hammock.  I'm very fond of them. They're my preferred camping option in a variety of settings and I've amassed quite a collection of them, from the massive  Hummingbird family hammock to the versitile Sierra Madre nube tent family of hammocks and accessories  to the unconventional lines of the hooded Go! outfitters  hammock tent and the inspired Tensile style sky-tents all the way to the classic lines of the Eagles Nest Outfitters hammock.

So, it takes something a little different to catch my eye in new hammock design. The kind of design seen in the Treeo. You may remember I did a Wish-lust piece on the Treeo a while back, well, it finally arrived and I eventually got around to testing it out. Designed with the outdoors in mind, the designers wanted to create a product that could be utilized by anyone, anywhere:

Easy set-up made easier with extra hands
From the avid adventure seeker to the family who spends summer nights at the park, the simplified design can be taken full advantage of with it's 3-in-1 capabilities. From hammock to ground sheet to rain fly within seconds (minutes, realistically), the Treeo is like the Swiss Army Knife of hammocks.


The real magic behind the Treeo is the Quick Draw Cord System found at either end (inspired by the simple draw-string backpack). By pulling the cords tight on each end, it creates the hammock function which then attaches to the tree strap and carabiner. The heavy Blaze Orange paracord of the draw-cord adds other slinging options too, depending on the space you have at hand.

By slinging the guy lines up high you can hang the Treeo above your encampment to provide shade from the sun or shelter from rain. And finally, by pulling the cords apart and staking each corner down, the Treeo can be used as a beach blanket or ground cloth. Made from Ripstop Nylon Material known for being lightweight, durable, and waterproof thanks to its PU 2000 coating. It features triple-stitched & taped seams preventing any rips or tears. The heavy paracord style drawstrings are made from single length of looped to enable it to be tightened from both corners of each end simultaneously.
accessories in a zippered side pocket
Doing so gathers up the corners and the short edges 213cm (7') to bundle into a hammock. The generous 274cm (9') long edge makes for a large hammock. The drawstrings then becomes part of the suspension rig. The double thickness 198cm (6.5') webbing 6.5' tree straps  are wide enough to be grippy to tree-bark without being bulky. They feature 8 loops sewn in at the working end with heavy bartacking to make very stiff and secure points to feed the included carabiners.

bomb-proof webbing loops for optimal hang adjustment
The webbing has a triple line of bright green trace threads run through it which helps identify twists in the webbing when setting it up. Twists in webbing reduce the stability of the loop against the surface it is holding onto and reduce the overall strength of the webbing to support the load (you). The webbing also has a eye-loop at end of its length to facilitate forming a knotless loop for hanging the hammock by feeding it through itself. The included steel carabiners slip neatly into these loops and take the drawstrings ably to ensure a very secure attachment.

The combination of the long drawstrings, long webbing and the overall length of the hammock makes for a long span that can be bridged by this system, shorter distances are easily managed by adjusting the point at which the webbing and drawstrings are connected.

snug as a bug in a rug. deep sides to snuggle under
The four corners and the midpoint of the long edge feature well sewn-in webbing loops to be used as anchor points and tie-down points when used as a cover sheet or ground sheet. Four hefty aluminium tent-pegs and a bundle of guy-rope with slider tensioners are included to make staking out or stringing up as a shelter very easy.
When in hammock mode, the corners are all drawn in tight so aren’t really usable but the midline loops are and could be used as gear hangers or stabilising tie-points if desired. The attached stuff-sack, (sewn into the mid point) also affords gear-storage, by putting a draw-string closing bag with a zipperaeble side-pocket. The pegs and guy-ropes all stow away neatly In that zippered side pocket when not in use.

When packed down in its stuff-sack the system packs down to a mere 28cm x 23cm (11" x 9") and weighs only 1.3kg (2.8 lbs)

solid stitching and impeccable finishing
As a hammock, the ample expanse of fabric used affords a comfortable hang. Even with is classic “banana” shape, the broad sides allows a good spread and stretch in its folds. The PU coated fabric was smooth and whilst not breathable, it also cut the wind nicely, adding to the comfort on a cool windy day whilst testing it. I chose to lay on the uncoated side to avoid the “laying on plastic” feeling and was happy. The triple-stitched and taped seams held weight nicely and gave no impression of stretching . The Treeo certainly catches the wind, so staking out when used as a ground sheet is crucial. I suspect that when used as a rainfly, care will need to be taken ensure sufficient tension is maintained to avoid rain collecting in pools, nor the sheet blowing around negating cover.

well placed stuff sack for slung gear stowage
One thing I noted was the tie-down loops are not placed such that the Treeo can be used as a hootchie tent without some additional work. A couple of extra loops of webbing would suffice and I may look into setting this up myself. It’s certainly good size for it and that PU coating will make it excellent at shedding rain.

included accessories from the zippered side pocket
as a ground sheet it is Tactical Baby approved






lots of leg room for lanky bloggers

a comfortable and supportive hang for supervising playground antics

Fourth mode: improv sail for kayak adventures?







Friday, September 22, 2017

Wish-Lust: TREEO Utiltiy hammock

So, this one is a bit "after the horse has bolted" but I thought it worth bringing to all your attentions as a good looking product. Coming out soon. I've always been a sucker for hammocks, and multi-use items and this is both in one. The TREEO is a "3-in-1" Utility Hammock "that does it all". From hammock to beach blanket to rain fly within seconds, the TREEO is the Swiss Army Knife of hammocks. Designed with the outdoors in mind, we wanted to create a product that could be utilized by anyone, anywhere. From the avid adventure seeker to the family who spends summer nights at the park, the simplified design can be taken full advantage of with it's 3-in-1 capabilities.

Made from a 2.75cm x 2.25cm  (9'x7.5') rectangle of Diamond Ripstop Nylon Material known for being lightweight, durable, and waterproof with triple-stitched & taped seams preventing any rips or tears. The TREEO  features a paracord drawstring through the two  7.5 foot sides, which allow it to quickly convert from a sheet to a hammock. The nylon is 1,000 PU grade waterproofed and the hammock is rated to carry 226kg (500 lbs) thanks to the stitching and use of paracord as the strapping. With its own sewn in stuff bag to keep your valuables at your side when in use. it packs down into itself to a  23cm x28cm (9" x 11") and including its compliment of  2x 6' tree straps with 8 loop, its 2 carabeiners and 4 stakes for ground cloth mode. it weighs in at a meager 1.27kg (2.8lbs) 


So, as well as a hammock, it will work as a ground sheet, a rain fly and a shade cloth. Webbing loops at each corner allow  a variety of attachment and set-up positions.


 The Range Travel Goods team are a group of passionate travelers that together have visited over 60 countries. They are now committed to creating products to make travel more simplistic and easy. The Boise, Idaho brand was born on Kickstarter with their first product, the Duo Travel Pillow and now continue working on other travel essentials.

 I really liked the idea and look forwards to mine arriving once they've made it through production ,adding to my array of hammocks.

Friday, September 1, 2017

Review: Cinch'n'Clinch gear hangers


This was a Kickstarter that was a really simple idea, that was really just polishing up and producing a marketable product. The concept is simple enough, ad looped cord, with two slipping barrel knots forming a loop that tightens to bind in tightly around whatever piece of gear you want to hang. The creators of this Kickstarter just took a pretty common way of lashing items, and added a little flare, with shrink-wrapping around the knots and at the "handle" end of the over loop.

The idea with this is that you can drop the slipping loop over whatever you want to carry, and tighten both sides of the knots to bind it tight and give you a secure grab around your bottle.






We are currently using Type III mil spec 550 parachute cord. This is an inexpensive, lightweight, tough, and durable Kernmantle rope with truly extraordinary breaking strength, especially relative to its small diameter. We continue to research the best materials for the Cinch-N-Clinch, but our four most important factors in our decision will never change: durability, resistance to abrasion, UV resistance, and environmental footprint.




Tuesday, July 4, 2017

Review: Tensile style Skytent



I love tents and I love hammocks, and I've expressed a desire for one of the Tentsile aerial tents for a long time, but they are quite expensive. Not wanting to miss out forever, I kept an eye out and checked out AliExpress, where real things go to be replicated. For Giftmas I bought myself the one-person equivalent. I always feel a bit bad buying knock-offs but at the very least, its getting the very innovative concept out there.











So, given my ongoing stroke recovery and my work situation, we haven't ben able to go away camping, so I hadn't been able to tryout my aerial tent. Australia Day came around and we were invited to BBQ in a park, sounded like the perfect opportunity to try it out. I took some extra webbing strapping, in case we had trouble finding tree's to sling it on, but as it turned out the picnic table we picked was close to three gum trees. I unrolled the skytent from its stuff-sack bag and took stock.



The contents included the triangular base, made from webbing reinforced ripstop with a low (70D) Cordura number and (high quality silicon coating to give it a waterproof index of 2000-3000 mm) the base, which is about 4m a side, had built in reinforced eyelets for the two sets of shock-cord threaded anodised aluminium alloy poles and a light, waterproofed (to 1500-2000 mm)fly sheet to connect to.

It also came with three sets of 6m (19') loop-ended webbing, and shackles to for it to the base. At one end a ratcheting system for increasing the tension was supplied.
The base triangle comes with a breathable B3 bug-screen net with twin zippers. Built into the "roof" are two sleeves to feed the poles through to keep the roof in place and add stability when setting it up and to drape the fly over.


Once set up, which took a bit of doing (pro-tip; set the tent part up on the ground in the middle of your space, then string your straps. I rigged my straps with a truckers hitch. Getting partial tension on the tent to set it at a good height was just matter of sliding the webbing up to the right height, one tree at a time and tightening the truckers hitches once they were even. PRO-TIP 2: get the three corners as evenly high as possible. this will stop you sliding "downhill" on the slick ripstop nylon.

Once set up, the remaining slack can be eaten up with the ratchet, but this takes some doing. I'm glad we weren't setting it up in the rain. Once fully tensioned which it really needs to be, we put the fly on, which  had nylon hook hardware and shock-cords. The 240D fly has a single up-and-down zipper which coupled with the wide door in the flyscreen, makes a nicely framed entry/exit and window when pegged back. with its attached toggles.

The interior is spacious, the 4m sided equilateral triangle provide  almost 7m². of floorspace, with 1.2m (the almost 4') of loft, with its quite steep sides, there is  a lot of real-estate.

The wide webbing reinforcements throughout the base distribute weight nicely. I'm 192cm (6'4") and weigh 90kg (200lbs).  Laying right down the middle, legs splayed to the bottom corners, I was very comfortably supported.

This skytent is rated to carry 400kg (880lbs) and the heavy-duty ratchets buckles have a staggering 2.5 ton minimum breaking strength. Even so, the makers recommend only stringing it at a maximum 1.2m / 4' from the ground. As a good rule of thumb, you shouldn't set a hammock up from higher than you would want to fall from. Or climb into.

The supporting poles that give the skytent its vertical structure are seated in these washer equipped eyelets, and with the shaped ends of the poles, they seat securely and remain in place even with the rambunctious efforts of Tactical Baby. The seams are all also all double stitched. The whole tent is well finished.  I had had worries about the quality, given it was a knock-off, but it's been well made and put together.

All packed down, the tent weighs3.0kg or so, including the included webbing and the ratchet. and packs down into a stuff sack measuring 50cm x 20cm x 20cm. It's not too bulky nor heavy and would make an excellent addition to a backpack for a camping trip.

Internally as I've said it is spacious, but good set-up is key. if any one point of the triangle is higher or lower than the others the effect is a slow and steady slide to the lowest point.

I took it camping off to a full-emersion live action roleplaying weekend, "After The Fall" .
So I found myself three trees and set myself up. As with most tents, second time was much quicker and easier, and i'd had my lessons learned from my first attempt so it was pretty quick.  I even slung a second hammock along side, for lounging in when I was in my full tyre-armour kit. TO somewhat disguise the bright green of my tent and its fly sheet  I draped the whole thing in some scrim. One thing I didn't want was anyone tripping and falling onto me as I slept, so I put it a little higher than previously.

So high in fact I needed to step up onto one of my tactical milk-crates that I pack my camping gear into. I also stowed my kit under the hammock, off to one side from the Skytent, in case I did have a fall.

Inside at one of the three apexes was a pocket system which worked quite nicely with a jumper stuffed in it as a pillow. I used the zipper as an attachment point for my night-light as there weren't any internal loop hangers.


All in all I am both impressed by and happy with my SkyTent, and would heartily recommend you al lgo check out the original design at TENTSILE - Stingray

After an afternoons romping by Tactical Baby, and perhaps more roughhousing than was necessary, one of the poles has been warped and now adds an uneven curve to the dome, but no real issue there.  Certainly no fault in manufacture. I've managed to straighten it out a little but eventually  I might either replace it or run it through a pipe bender in reverse.

The Skytent handled nicely when occupied by two. even if one was little and bouncy and the other big and lumpy. Alas, I haven't tried it with two adults, but they are rated for it.
I put  a yoga mat in it when I camped, just as insulation, it was plenty comfortable to lay in in warm weather but any breeze below will chill you right down. Setting up an under-quilt like those made by the Go-Outfitters would work  a treat, but you'd need a triangular one.   






One thing I found was that the fly lifted and flapped about a bit, so I lashed it down underneath with some handy paracord.


All in all and excellent product and not just a gimmicky concept. all the benefits of a hammock and tent combined.


Pro-tip #3: set your doorway at chest height if you-re expecting friends to pop by. Nicer conversations for everyone when you can be eye-to-eye.




























Related Posts Plugin for WordPress, Blogger...