Sunday, April 26, 2020

Review: County Comm - Minnow Gripper

String, rope and string accessories. I like them. One such accessory that caught my eye was the Minnow Grippers offered by gear treasure source County Com.

What are they ? They are tarp clips. Clipping onto tarps to provide an anchor point where grommets don't exist. They can be used to hold onto and fasten plastic sheeting, drop cloths, tarps. canopies, awnings, pool covers, towels, BBQ covers, sails, cables and bags, netting and hunting blinds. All manner of covers you don't want flapping about.

 These clips clamp down on a surface  by means of  a two piece jaw which closes on the surface with friction locks on the back end of the scissor arms, much like those found on locking forceps. The jaws of the Minnow are cross-hatch grooved to provide "teeth" by which it holds fast  to many materials.
Made from molded fiberglass reinforced polypropylene, the Minnow is a dense and sturdy piece. The central pin has a over-hang lip and channel to feed through at full-open position, otherwise holding the clip together with little or no lateral movement. The jaws themselves open wide enough for clamping materials up to ¼" thick and the molded locking teeth have 6 positions to allow it to cinch down onto material in increments for a very secure bind.


At the back of the jaws, behind the "teeth" where cables can be secured without damage from  the teeth. This gap can also hold paracord to create a perpendicular attachment on a running cord.  Either in the locked teeth or in the gap behind the teeth in a sliding configuration.   The material is reported to crack resistant to 35° below zero (-37C). it is chemically stable and resistant to most solvents and marine conditions.

The tail end of the Gripper features a hefty hook on each arm for capturing cordage. the tips of the hooks are double wide, matching the maximum width of the Gripper. This means it is stable and flat on it's side. the base of the hook features a hole which is a perfect match for standard paracord, but will also accommodate thicker cords, especially if they compress a little. The hooks are 15mm deep and are angled, providing a depth of capture to reduce slippage of cord coming loose in vigorous flapping.

The twin tail hooks allow cordage to be looped over, one, the other or both hooks as the need arises or situation permits. Fixing one guy line or two or rigging  a single cord perpendicularly from the clamped material. The twin hooks also allow for some creative knot-free attachment, not unlike those possible with the Fishbone and Piranha knotless ties. Forces pulling back on the Minnow will act to tighten their grip , with an action not unlike squeezing on a pair of pliers.

The locking teeth of the Minnow Gripper first engage at around 9mm (4/10") at the tip which is about 6mm at the " back" of the jaws. That puts the maximum thickness of material they can close on, but each Minnow Gripper is purported to hold 175 lbs (80kg) whist only weighing 0.35oz (10g).

I haven't tried this for max weight, but the sail-cloth awnings I strapped down with it flapped a fair bit in the wind overnight without coming loose. That seems fit-for-purpose to me. Not a single Minnow came loose, in several configurations. I'm quite pleased with the utility, form factor and ruggedness of The Minnow

 
They come in two colour options: Tactical black and Coast Guard Orange. I opted for dont-loose-me orange for my 8. (two tarps worth) half od which I store clamped to my redoutable Mystery Ranch 1DAP  it's my regular day to day and Get Home Bag  so it seemed apt to keep some there too.

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...