Showing posts with label UV. Show all posts
Showing posts with label UV. Show all posts

Sunday, November 19, 2017

WISH-LUST: UV PAqlite MSL micro-safety-light

So, here's a Kickstarter project I thought I should promote. It's an upgrade product of something I already have and I am only too happy to share the news . I've covered products by UVPaqLite before, their unpowered glow-in-the-dark items are awesome  but none have been as impressive as the powered Mule ORB lights. These USB rechargeable battery powered LED lit globe with a shell of epoxy embedded strontium aluminate crystals. The LED's act to charge the crystals, as well as acting as a  mild green-yellow flashlight. An on-board chip  allows it to pulse every 2 minutes to keep the crystals charged. 
An even smarter feature utilizes a small photo-receptor built into the side of the Orb, just beside the USB charge port.
 Holding the on-off button for a double-flash of the light letting you know you've activated the light sensor and now the Orb will only function in hybrid mode when it’s dark. It lights up for about 4 seconds, which can be a bit disconcerting if you're trying to get to sleep and it's dangling over your head but certainly enhances its 100hour battery life. .

So, UVPaqLite have come up with a new and improved version of the Orb, in the MSL, their Micro Safety Light. The MSL -Micro Safety Light - is a compact flashlight and safety device. It's the light you'll want everyone to own!

The MSL is pocket sized, being a slimline lozenge shaped, light, with a more prominent on-off button than that found on the Orb.  The LED is being in two different options, a bright white (30000-35000k) version with a 2.3 hour run-time or a UV (400-410nm) version with a 2.6 hour run-time.

It again features a pulse mode, with a 2 second / 2 minutes mode, or a 2 second /15 minute mode. These have runtimes of 140-156hour and 1037-1172hour runtimes in white/UV respectively. (It runs for almost 6 full days on the faster "pulse mode".)

The portable design makes it easy to take anywhere. Ridiculously bright flashlight. It glows in the dark so it's easy to find. The MSL also is designed to attach to a very loud emergency whistle (reported to sing at  115 decibels) which is great for survival situations, natural disasters, crime prevention, or to ward off animals. It's much louder and less exhausting than yelling for help. And the pitch of this whistle can be heard over loud rescue equipment or ambient noises.



The UV emission wavelengths of  that LED option is particularity good at exciting strontium aluminate and will be the one I hope to get once the project goes live.

Now, it's battery powered, rather than USB rechargable, which is a down-side, but the battery time is cheep, plentiful and  given the long run-times  I see this as a good investment.  get onto it. Get one for you kids, your parents and your own keychain!











Monday, November 4, 2013

Review: Nuko Tool - ACDT (in GitD)


Following up from the sneak-peak:

When I saw that Norman of Nuko Tools was dallying in glow-in-the-dark materials, I was quick to drop him a line expressing my desires. Whilst the GitD platic is too fragile to be used to mill one of his signature Single NukoTool punchrings or the classic Nuko Heads which he has been milling out of G10.  (and you may remember I got the titanium version for my lovely partner Omega)

He thought it was a great idea too, and suggested he could sandwich a slab of GitD plastic between two titanium slabs of his 2nd Gen Atomic Cranial Divot Tool, which he did, and this beauty is the result.

Seen here looped through my belt-loop, with my paracord ID lanyard hitched.


The simplicity of this deign is evident, it almost passes as a piece of modern art.

Sandwiching these three layers makes the tool considerably thicker than its design originally intended, but this isn't really a drawback, except for those looking for a slimline pocket fob. I like my metal to make its presence known, and this certainly does.

Three hex-screw rivets lay flush with the front surface, and a keyring hole drilled through the piece gives the option of attaching a split ring.

The leading edge of the ACDT features a bottle (or perhaps threat) opening scallop, the flanking edges of which protect the soft GitD middle nicely, and are not so sharp as to catch or dig into clothes or the hand whilst wearing the ACDT.

When gripped through the finger hole, the curves fit the hand nicely, even with an index finger and middle finger ring on. This leaves the "bottle opener" corner as your leading edge, with the squared faces outwards and upwards. Essentially a pistol grip, with any keys or the like, trailing from the bottom of your palm. I found that when striking a target, the slot bit into my index finger a little, but as I'm not planning to make a habit of taking to the bags (or heads) regularly with it, that's no big deal. This is primarily a fob, with a -tertiary- impact tool application for me. That said, I put some nasty dings in a HDD, timber facing, and concrete wall!

I also tried a reversed grip, presenting a much more flat face, which covered more knuckle, but left me with less to grip, and put the bottle opener in my thumb/index webbing.

This wasn't quite as easy to grip, but offers the other advantages of more titanium (and glow) frontwards ..

I found that the extra-thick ACDT has been difficult to feed a split-ring through, and whilst I am still looking, I've so far been happy just to do a loop through the finger hole, the placement of the slot has been just fine for this.
Then there is the glow in the dark side of things. The running-board strip of GitD plastic catches light quite nicely, I have noticed my belt-looped ACDT picks up enough ambient light to be noticeable when I go into a darkened room, and quite positively flares up after exposure to the Australian daytime. For the purposes of this shot, I did hit it with my Jil Lite - JenyX UV torch .

I really love my UV and GitD items, as well as my titanium goodies, and even more so, my wearable impact tools ....

If you have a hankering for some cool pocket bling, be sure to check out NukoTools ...


Friday, September 20, 2013

Review: UVPaqlite



I had a comment left for me by a reader on my Facebook page (g'day LCpl Thralls!) following on from my Lazerbrites post I dropped by UVPaqLite to check out their glowsticks.

I'm a sucker for lights, as my regular viewers would know, and have an enormous affection for glow-in-the-dark products, having decorated many childhood bedrooms with constellations and have expanded that into my adult life with the SAR GlobalTool Moon-Glows. I was impressed by the range of rugged, practical items that UVPaqLite had on offer, and snapped up their mixed collection Scout Pack.
 I put my Moon-Glow down beside the collection for a comparison as well as a wrapped cyalume stick, for scale. I super-charged all of these with my Jil-Lite Jenyx UV torch

The scout pack consists of four different elements; the UVGlowStik, the 6" ToobLite, a UVO ring necklace and the flexible signature UVPaqLite sheet

The UVGlowStik, ToobLite and UVO are solid pieces, consisting of solidified clear epoxy, in which crystals of
glow-in-the-dark strontium aluminate are suspended. Being solid-state, these pieces can be cut or drilled and can also be taken to ANY depth. 


Unlike traditional GITD products, the large crystals are clearly visible but apparently this large granularity increases the brightness, duration and speed of charging, they certainly appeared to do so.

The 4"x1/2" UVGlowStik is not quite as bright overall as the 6" ToobLite, but is "ruggedised", lacking
the tube, plastic cap, and key chain ring of its larger cousin, but features a drilled lanyard hole.
Picture
Swiped from UVPaqLite webpage.

The UVO is 1.75" in diameter, and comes in both the traditional greenish GITD hue, but also in their "Ice Blue", but subtly adjusting the chemical composition of the crystals. Spinning the UCO on its lanyard produces a signalling method of contrasting of light and movement which would make it easier for rescue crews to see from the air.


The UVPaqLite flatpack is a vacuum sealed roll-able, stuff-able, pouch measuring 20cm x 15cm (8"x6") and weighing only 36g (1.3oz) and can be dangled or laid flat to provide a tents forth of illumination all night long.  Better yet they have an essentially infinite shelf life, unlimited recharge cycles. Perfect for a disaster, where resupply, or even infrastructure is doubtful.

I found that the whole set could be exposed to electric room lights for "getting ready for bed" durations, and still be visibly glowing in the pre-dawn gloom, when Tactical Baby comes calling. Daylight exposure for just a few minutes makes them light up visibly even in lit environments, thanks broken ozone layer! UVPaqLite suggest that they would still be visible as markers even after 4 days of cave-darkness. These are super cool, and I think I will be adding more to my collection as soon as budget allows, great gift ideas are forming ...

Thursday, September 12, 2013

Review: Jil Lite - Jenyx UV torch

My friend Tay from Hornest tipped me off that he was getting a new light from Jil Lite coming into his shop, and being the luxophile that I am I jumped at the opportunity to pick one up. The reason I was so keen on this particular one, was that it was a UV emitter.

I have a UV laser pointer (from LazerShirts.com) which is pretty damn cool, but there are times when having a wide spread of UV light can be very useful for identifying a variety of materials as well as spotting scorpions, hidden UV ink messages and giving a low-impact tracking tool if you have the right markers... More on that later.


The Jenyx UV light from Jil Lite features a 2-chip controlled LED emitter producing 80 Lumens at 400nm. The light is powered by a single AA battery, and has a reported burn-time of 3 hours, with a constant brightness control circuit built in to ensure a steady beam.


The light distribution is quite good, with a room filling "orange-peel" aluminium reflector, behind the B270 optical glass AR coated on both sides lens. The entire unit is housed ay 6061 aircraft aluminium, giving a very sturdy little package. Activation is by tail-cap clicky button, which is inset below the butt-end of the housing, with a lanyard hole built in. Water resistance is achieved with o-rings, but the model is not dive-rated.I like the removable steel pocket clip as well, always good to have that as option.

 I was able to take some pictures with my iPhone  and was very happy with the intensity and reach of the light, illuminating my rather staggering NERF collection, as well as the "Toxic Green" handles of my KA-BAR Zombie Killer knives . UV lights are also very powerful chargers of glow-in-the-dark items such as Ranger Eyes and my SAR Moon Glow disk. It also picked out the green paracord that shipped with my Fishbones and Piranhas  as well as the orange paracord I use as well.


UV ink such as found in highlighters, or in anti-counterfeiting can act as a tracking or messaging system. UV reactive paracord or even NERF darts can act as inexpensive "breadcrumbs" to mark a trail, an alternative to IR or other "your-eyes-only" methods.

This is a cool little torch, and I'm enjoying having it on hand to charge my glowies, and to spot new UV reactive materials I come across in my adventures.



Related Posts Plugin for WordPress, Blogger...