Showing posts with label multitool. Show all posts
Showing posts with label multitool. Show all posts

Tuesday, January 9, 2024

Review: Rose Kuli hammer multitool

Multitools have a special place in the heart of all preppers. They make for a resource rich bundle that can provide a lot pf utility in a small package. whilst the ubiquitous Swiss Army Knife is probably the first multi-tool for many ( it certainly was for me), the Leatherman or Gerber belt tool has taken the place in the eyes and EDC of many and whilst these paragons of utility assuredly have their place, they don't do everything. That's were something like  the Rose Kuli hammer tool comes in. 

Prominently featuring a split hatchet head and a hammer head, the jaws opening up to expose pliers and cutters, with a spring assist for the plier arm. The Rose Kuli tool features red wood scaled handles, screws recessed in at the high end and riveted at the bottom end, the plyer-arm retaining loop seats into a notch in the bottom of the plyer arm, preventing the plyer head from opening up unexpectedly. 

The hammer-head sits directly in line behind the hatchet head to maximize impact efficiency for both tools. I found that the small hatchet head being only 4cm (1 1/4") broad but was plenty enough tool to carve a notch in some logs i have seasoning at the back door. You wont be felling any mast logs with it, but it'll work nicely delimbing small logs, and even baton splitting, the hammer head providing a good strike face. I worried that the hatchet head appeared riveted in place and would come loose but it turns out that top rivet only holds the sides in place and the hammer/hatchet pieces were secured by the pivot rivet and marry up tightly when the plyer arm is closed. 

The plyer jaws have both a fine toothed and a broad toothed section, for both fine and coarse tasks as well as a 1cm (2/5") cutting jaw, for wire or nail cuttings. 

The hammer itself drives nails quite well, for such a light tool at 400g (14oz), and I could tap one into my new treated-pine fence-posts with ease. The wood scales and plyer arm make for a comfortable grip on the palm and fingers. the hammer-side handle-face holds a surprise in the form of a selection of folded tools.There are 5 fold-out "blades" to further supplement the tools over-all utility.  From left to right there is a simple leaf-point single edge blade, a Phillips head screw-driver, a wood-saw with fish-hook disgorger tip, a 4-size hex nut wrench (5,6,7,10mm) with bottle-opener and pry head, and a serrated blade  with a file and flat-head driver tip. I would have liked a can-opener, and none of the tools lock, but each are functional.

As Corb Lund would sing "Well it's a vise grips for pliers, and pliers for a wrench
A wrench for a hammer, hammers everything else
"

It came in a flimsy nylon sheath with a hook and loop flap that barely covers the heads, leaving the edge of the hatchet somewhat exposed. 


For a light-weight tool, it certainly bridges the gap between belt-multitool and camp-hatchet.




 

Tuesday, February 7, 2023

Review: Stilletto titanium nail puller

I do love a  good salvage. Whether it be road-side junk-swap, flea market bargain or dump-harvest the idea of junk salvage strikes a deep chord in me from both a 

post-apocalypse survivor point of view  and 80's kids sci-fi. That said, sometimes having the right tool for the job, especially if you're working with aged or non standard materials. I do like to recycle timber, for garden-beds and storage shelf construction, and getting the nails out can sometimes be a real pain, especially in well seasoned hardwood pallets.  

Previously I have made do with my pair of  demolition hammers (the Dead-On Annihilator and the Stanley Fat-MAX FUBAR) which are brute force tools, even when paired with pry tools such as Jimmy and the ever rugged Breacher bar. I've had a lot of success with this combination of tools but they're inelegant. I'm also a sucker for titanium. I know its not a miracle metal, neither mithril nor vibranium/ adamantium but its pretty rad.

Now on to the tool!

This is the original Stiletto Titanium framing nail puller with the Patented nail removal feature! In essence it is a 30.48cm ( 11.5") pry bar, made of one piece of titanium. It has an open-truss design to cut weight but retain rigidity, weighing in at 300g (8.5 Oz)









One end features a standard cloven hoof pry edge, which is quite pointy, for aggressive purchase finding, and the other end its a cat's paw, 90 degree pry bar, with a similarly pointy tined  cloven end, and a smooth, rounded fulcrum for mark-free nail-pulling. The key feature of the cats-paw end is the perpendicular dimpler. This open-ended conical protrusion is used to punch a circular indentation into the wood,below the level of the head of the nail, in order to allow either of the pry ends to find purchase and pull them out. This is achieved by centering the open end of the dimpler around the had of the nail and striking the back face with a hammer, hard enough to drive a dimple into the wood around the nail-head. 

The dimpler has an internal diameter of 1cm (0.4") which should be plenty big enough for common nails found in timber. Stiletto specifically state it be used for "common nails" only

 

The divot allows the tines of the nail pullers to be worked under the nail-head without gouging the wood too much ( divot aside). I found that for especially stubborn or embedded nails ( or punched down, or otherwise deep) that the tines can be driven in by hammering in the tool from the other end. It should be worth noting that Stilleto claim the titanium strike faces outlast steel bars 3X longer - doesn't spall, crack & mushroom like steel bars. I also use the back face of the cats-paw to drive some nails, and though it took some transfer marks, the satin matte finish was un-marred. It's a bit light to act as a hammer effectively but in a pinch, just fine. 


The open truss body is clean edged and smooth to the hand, allowing a strong grip be taken without roughing up your hand.
The shaft of the tool is slim enough to be threaded through PALS/MOLLE channels, for belt, pack or carrier  carry, but I wnt through my leather scraps bag and whipped up a quick holster with a belt loop for my use. I look forward to easy break-down of pallets and furniture for firewood or lumber needs.

Its a great tool, multi-functional, rugged and fit for purpose. 















Wednesday, June 2, 2021

Review: Gerber - spork set

I treated myself a while back to a fancy new set of eating tools. Now, I am all for food on a stick, or if needs be, wrapped into a burrito or schwarma, especially when it comes to outoors cooking and eating. Every extra piece of tablware or cutlery you use is one more piece you have to bring, wash and haul back. A stick is good but limiting and eventully marshmallows and sausages loose their luster. Whilst I am also very fond of one-pot/one pan cooking, there are times when a fork and spoon are the right tool for the job, beans, scrambled egg and porridge don't work well on a stick. 

Gerber had an offering that I was keen on. A combi-tool set combining the Gerber Devour set with a plain spoon and spatchula to make a set called the Compleat.
The Compleat is made up of four individual tools; a Deep basin spoon, a long tined spork a spatchula with a serated edge and a multi-tool. the fork, spoon and tool all nest into a slot in the base of the spatchula securely until needed.

The spork has longer tines than im used to on a spork which is a nice change, making it easy to stab food and not drop it and loose it. They aren't yet so long as to be loose stiffness.  

The spoon has a nice straight edged tup, allowing it to scrape the bottom of a bowl or mug to get the last skeriks of food. The dish was deep enough to eat soup with and shovel food into my mouth without bulging out too much when nested. 

Both spork and spoon have a pattern of  stamped into their anodized 7075 T6 Aluminium handles. The spatula component is made of a high temperature nylon with a silicone overmold along the leading edge and one side. One edge has a serrated edge to use as a knife. The  knife isn't great but it'll do and the spatula isn't going to win any awards but it'll flip a pancake and get your eggs over-easy if you're patient. The nifty thing about this tool is that combining the fork or spork with the spatula will create tongs on one way and an extended stirring tool combined longways. Excelent for stirring with your face out of the smoke and for picking sausages out of a pan, respectively. 
 
The spatula's notched ends are directional and prevent the tools from falling apart mid-use. Though the spatula has an arrow molded into it but I routinely try to put them together the wrong way. I think  will scratch arrows into the spoon and spork end surfaces to remind myself in future.
 
I found the metal utensils comfortable to use, did not transfer too much heat to my hand and were certainly sturdy enough to both cook and eat with. 
 
They're also capable of lifting cast iron pots' lids off with ease thanks to both their curved cross-section but also the grip-improving texture lending them strength through engineering. I think I'd prefer the spoon and spork to be titanium rather than aluminium but it works just fine. The spoon/spatula combination tongs work well for fine tasks as well more standard kitchen tong uses. They work just fine ,with the plastic of the spatula providing sufficient "spring" for use, though they lack the "clack-clack" safety test-feature.

 
 
The last component of this set is the utility tool that serves to lock the other tools together. This powder coated steel tool features the following components; bottle opener of obvious utility, a sharp plane-style Veggie peeler, a Serrated cord-cutter and package opener hook/ can-opener and the all important bottle opener. 
 
All-over is sits at 20cm (7.75") long ant weighs in at a mear 65g (2.3 oz) which will neither overload or over encumber any but the most hard-core ultra-light packers.  
 
 
The set comes with Gerber's Limited lifetime warranty, but given its sturdy construction, youd have to be pretty careless with it to need that. The spatchula componant might burn/melt if left too close to your fire for too long, but it worked fine for my cooking needs.

 
Find it here on Amazon:



Wednesday, March 16, 2016

Review: MetalDreamer - PINCH multitool

Always on the lookout for new and exciting titanium pocket tools, when the Pinch tool came up on Kickstarter, I could hardly restrain myself. Given the very affordable pledge levels I didn't feel bad about chipping in, and was pleased to see an envelope arrive in the mail not too long after. Created and designed by Jeff Morin the Pinch is the smallest tool in the MetalDreamer lineup it is billed as the go-to tool when you're in a Pinch! Cute.

Packing 11 functions into its 1.5" x .5" design, the Pinch has a surprising amount of home-fixit application in mind in one little package.

With a mini pry bar, bottle cap opener, 6-mm hex wrench, wire stripper, nail puller, keychain eyelet, 1” mini scraper, hex driver bit holder, and two flathead screwdrivers. I ordered mine in metric, so it also features a 3cm ruler etched into the scraper side as well.

I opened a few bottles, pried open some tightly sealed tins, and scraped some stickers with it, and it seems to live up to its intent, but the small size makes it quite difficult to apply much torque, but you'd expect that from a tiny keychain tool like this. If you wanted a big prybar, you'd go the County Comm Breacher Bar, or the like. This is a keychain fixit tool, not a dedicated tool-box replacement.

The Pinch was on Kickstarter, and is still only available to backers it seems, but keep an eye out, and look over the other offerings from Metal Dreamer, they have some very pretty, and functional looking designs.

Friday, February 12, 2016

Review: TrueUtility - FIXR


This is a fun little tool that was sent to me by the folks at True Utility, who stock all number of nifty gadgets and gizmos. I've been keeping it in my pocket along with my pocket EDC for the last few months, finding uses here and there, and I thought I might tell you a little about it here.

It's only a little tool, and only fit for small tasks, but there are times when only a small tool is required and having something that is "just so" is all you need.

This is the20 tools in 1 FIXR by True Utility.

Constructed of a black titanium coated, 422 grade stainless steel with a silver stainless steel disc, rotating on sprung stainless steel ball bearings - The FIXR is a flat, light, strong, and definitely useful tool.

Formed around a wire-gated carabiner, it will clips to a variety of narrow loops, hooks and straps and is always ready for use, with a considerable array of tools crammed within a very small small space. The brass rotating tool plate serves to protect and keep all the tools safe when the FIXR is not in use.

It simply twists with a push of the thumb on its sprung bearings to click definitively into set positions to use the driver bits, nail cleaner, extra sockets, razor sharp cutter and wire stripper.

A full breakdown of the tools is:

1. Wire-gated carabiner
2. Bottle Opener
3. Nail Cleaner
4. Large Flat Screwdriver
5. Medium Flat Screwdriver
6. Small Flat Eyeglass Screwdriver
7. Medium Phillips Screwdriver
8. Small Phillips Screwdriver
9. 14mm Spanner/Wrench
10. 12mm Spanner/Wrench
11. 10mm Spanner/Wrench
12. 8mm Spanner/Wrench
13. 6mm Spanner/Wrench
14. Bicycle Spoke Wrench
15. Cutting Blade
16. Wire Stripper (by combining the blade with the notch of the tool disk)
17. cm Ruler
18. Box Opener
19. Pry Bar
20. File

I would have put the file along one of the thin edges so you could use it as a metal-cutting tool, but it certainly works to round off any rough edges of things you might find bothering you. Wire, glass, ceramic, fingernails or teeth, it's surprisingly bitey.

The FIXR has proven itself worth the space it takes in my pocket, and I've mended a number of things, opened packages, and pried a few stuck items with it. Smaller than a multitool but still packing a fair number of useful items in one little package, if you want a "forget about it till you need it" tool this certainly fits the bill.




Monday, September 14, 2015

Review: Platatac SUP pouch

Here's a very useful pouch that has gone un-sung for a while, but I wear one every day. This is the Platatac SUP II Small Utility Pouch.

It was primarily designed as a pistol magazine pouch, which I got to model with one of the Glock style iCombat CO2 training magazines the SUP mk II can carry a range of items including pistol magazines, multitools or knives, flashlights of up to 1” diameter bezel, flexicuffs and even OC spray if that's your thing.

The pouch has a hook-and-loop removable lid can be adjusted to securely fit items varying in length. There is an internal hard plastic plating within the flap, for one handed operation during the reload or access to your needfuls. Internal elastic retention on the sides allows the SUP mk II to act as a shingle for CQB application. Might not be as tacticool as a TACO pouch but they fully work. I have my second-hand Gerber multitool in one of mine, which lives in the small of my back on one of my rigger belts, everywhere I go.

These low profile pouches are great for storage of quick access items and are small enough to be placed anywhere on your rig without hindrance to your freedom of movement.

The pouch is fitted with PALS/MOLLE attachment system, with a single channel of two rows, one after another (no gape) so you can loop it a couple of ways. Instead of a press-stud closure it has a fiddly hook-field sewn into the bottom webbing loop, and the stiff plastic reinforced tongue has a corresponding field-loop, and a tab of webbing to use as a draw pull. I found this really difficult to set up right, as it was on the opposite side of the tab than I would have expected. This means that to fasten it it has to be doubled over, which made me pretty nervous about how well it attaches.

It's never come loose, even when I have had it rigged for a belt loop, rather than fed through other PALS/MOLLE but I'm just hesitant.

The drainage grommet in the bottom of the pouch nicely frames the needle-nose Gerber pliers, and seats them nicely, and having a good pouch for my multitool has been a crucial part of my EDC. 

    Thursday, August 13, 2015

    Review: Smart Wrench


    Here's a little tool that I backed on Kickstarter, and was really expecting big things from. The idea was elegantly simple. A CNC milled titanium ratcheting wrench, with storage for additional drivers built-in the housing. 

    It was a relatively small project, and only had low numbers, due in no small measure I suspect to the high price, but at the time I was flush, and eager to add some more multi-capable titanium tools to my collection.
    The development was a bit slow, but we had design and prototype pictures along the way, and this is often the case with first-time Kickstarters, so I didn't worry much. Eventually, the tool arrived, and I was really impressed with the beauty of the thing. Smooth lines, lovely graduations and a very smooth screw-on tool housing in the handle. The tool bits were also very nicely produced, and nested really well, without any significant rattle when fully stowed.
    The bits included are: 2mm, 2.5mm, 3mm, 4mm, 5mm hex bits, and a flathead bit, all CNC turned from the same Grade 5 titanium alloy (commonly known as Ti6Al4V) as the rest of the tool.

    The extender bar that marries to each of the bits to the wrench body has a rubber o-ring on the tool-mating head, as well as the two sides where the extended marries to the wrench. These bind the bits to the bar, and the bar to the tool by friction, some other users commented eu were disappointed that a ball-bearing indent attachment wasn't offered, but it seems to work well enough for me.
    The ratchet has a cute engraving to indicate the direction of ratcheting to use, but here is where the tools biggest fault lies. The ratchet slips extensively, and either doesn't catch at all, or slips under what I would call "normal use" in hand tightening or loosening bolts, screws and the like. 

    I was really disappointed with this, and it seems my fellow backers were too. Such a beautifuly put together tool, and when it comes to the primary action, such a disappointment. With some angling, you can get a better or worse ratcheting action, but even then, it's barely functional. 

    Considering I'd want to be using for small electronics and devices access, where bolts are often held in with Loctite glue, and need a fair amount of delicately applied torque to initially shift. Outstanding ergonomic and practical design, such a let down for the functional basis of the tool.

    Friday, March 27, 2015

    Review: RaidOps - TM-Joe & MF-Delta

    Check out these bad boys! I got in touch with a long time source of Wish-Lust for me from RaidOps out of Korea.

    They make a wide range of titanium impact tools, knives and hard-wearing and multi-function pieces of wearable art. The two items that I got are the triangular MF-Delta and the evil platypus skull shaped TM-Joe.

    Both are made of grade 5 titanium, and are double heat-treated to over 500oC to achieve HRC 50-52. They are finished in a dark-brown patina.

    The TM-Joe is 84mm (3.31") x 58mm (2.2") x 5mm (0.2"), weighs in at 42g (1.5oz) and features 11mm (5/16") nut holes in the "ears" and nose" with a smaller, 9mm nut hole adjacent to the larger one in the nose. The very tip of the tool is shaped to act as a pry-bar, with nail-pull at the center. The pry-bar is not chisel edged, so there is no fear of cutting things accidentally, but will limit that "first bite" width needed to get a pry happening.

    As well as the mean looking eye-holes, there is a lanyard hole in the middle of the top of the piece which mates with the RaidOps Quick Release attachment clip, a small piece of polycarbonate plastic with two rounded pinching surfaces that fill the lanyard hole, and hold with sufficient force to prevent any accidental dislodging.

    A quick forceful tug and the tool comes away in the hand, ready for action. Both tools feature attachment points for the Quick Release mount, and come with a standard ball-and link chain.

    The MF-Delta is made from the same Grade 5 titanium alloy with it's dark brown finish.It measures  61mm (2.4") x 70mm (2.76") x 5mm (0.2"), and weighs 31g (1.09oz), 31g (1.09oz). It features two hex driver cutouts, one of which also doubles as a bottle opener. It also features a single 7mm bolt hole, but has four lanyard holes in its middle, and another at one tip.

    The MF-Delta, being shorter and more evenly dimensioned is a little less obtrusive to the eye, where as the TM-Joe is more stylized to look like a piece of art. Neither are bladed, with all the edges being rounded if not fully milled. Even compared to the NukoTool Skully or the Nuko ACDT they look more like jewelry or abstract art than an impact weapon.
    When snapped off their neck-lanyards, both the MF-Delta and TM-Joe fit both snugly and safely in a palmed fist, those rounded edges don't dig, nick or snag.

    The rounded "necks" of both tools quickly slip around the inter digital gaps between fingers, giving you a really secure grip, and bracing against the palm to let you drive them with considerable force into whatever you felt the need to. I put some pretty effortless divots into furniture around the house, with a very satisfying sound. I found that the grips were probably the smoothest and best fitting for my hands that I've encountered for this kind of tool. Great thickness and width of contact points and sufficient aperture to be held naturally.

    Worn around the neck, or attached to a keychain, these innocuous tools are both elegant to look at, have a beautiful finish and even a "chime" when struck, I have been really pleased to add them to my collection, and will probably keep one on me whenever I travel, not to mention visit anywhere that regular defensive items might be frowned on.












    Be sure to check with local regulations and legislation when it comes to this kind of item. It would be an easy enough thing to confirm, rather than falling foul of LEO's just doing their job. Being booked, fined or incarcerated won't help your ability to respond to an emergency, so be smart.


    But be smart with gorgeous looking items that work well and are robust, like the RaidOps tools!




    Wednesday, June 11, 2014

    Wish Lust: KickStarters - RECON 6 Watch & KLAX

    From time to time I either get forwarded, or read about some great ideas going on via Kickstarter, or other crowd-sourcing sites, and I want to boost their signal to help them out, as well as getting some gear ideas out to you folks ....

    check these two out...


    From the creator of the Crovel Extreme comes this jam-packed survival watch.

    In his words:
    *******************
    RUGGED AS IT IS USEFUL:Recon 6 Watch is the Baddest watch around: Compass, Signal, Can Opener, Fire Starter, Whistle, Cutting Tool!
    The most multifaceted utility watch you'll ever own.  Life in the great outdoors is no fashion show, but there is a tough and rugged accessory I am getting ready to launch that not only lets outdoorsmen make like Grylls, but could also save your life.  I created the Recon 6 Watch to tackle the unexpected and perform multiple tasks. Inspired by the desire to always be prepared, a cross between the Swiss Army Knife and MacGyver will take this multi-featured watch to a whole new level.  After months of hard work, my idea is almost ready to become a reality.
    As well as a bezel equipped, phosphorescent handed and anti-chip and glare faced watch, it also features the following survival components
    - Multi-Tool
    - Blade with sheep hook design for dressing out small game
    - Bottle opener
    - Can opener
    - Fire striker
    - Signaling mirror
    - Fire starter good up to 5000 fire starts
    - Aluminum rescue wistle
    - 25 ft. of braided fishing line with 2 small fish hooks
    - Magnifying glass
    - EMP proof, liquid fill compass
    - LED flashlight
    *******************
    Hefty, and with a price tag to match, but packed with content....

    Then there is the father-son team behind the quite innovative multi-tool, survival axe, which I have my eyes on.

    In their words:
     *******************
    The KLAX is a multi-tool built into the head of an ax.  It allows you to attach the ax head to a handle quickly in the field.  It uses the nested clamping system shown here.   The clamps rotate out from the handle for use.


    The KLAX is designed to be a short term solution to many of the problems that you could face either planned or unexpected. It will help you to get through situations where carrying a full set of dedicated tools is just not possible or realistic. Here are a few examples...
    - stuck on the roadside in the backwoods and need to build a lean-to for shelter
    - injured hiker needs an impromptu travois (stretcher) to be carried to safety
    - hiking and need enough wood for a small cooking fire
    - hunting and want to make small game traps
    - forgot the hammer and need to pound in the tent pegs
    - starting the split on a small log without many knots
    - need to dig a hole (let's see your multi-tool do that)
    Bottom Line: If you think it is trying to replace your full-sized dedicated tools for everyday use, you won't be happy with the KLAX.

    KLAX-Lumberjack  Our high-end stainless steel model with the most features.  The first three models are all made from heat treated SUS420J2  stainless steel which is perfectly balanced for keeping an edge and maintaining strength.

    KLAX - Woodsman   Our mid-level stainless steel model with just the more useful features.

    KLAX - Feller  This is our more rustic model with just the basic features you need in the outdoors.

    Ti-KLAX is a Titanium version of the KLAX – Lumberjack and comes with all the same features, but because it is made from more expensive Titanium, it weighs only half as much as the Feller and is stronger than steel.  The Ti-4452813 titanium is also anodized to provide some eye catching highlights.
     *******************


    So, some pretty cool concepts there ....


    I wish I could back them all, but we'll see, and perhaps I'll get to show them off in good time.

    Thursday, January 16, 2014

    Home Front: help Brad out! WTFs, TiKeY, TiPik sets!

    You may remember the TiKeY that I recently covered (the article was picked up by Recoil Magazine, awesome, thanks guys) and the titanium WTF tool I covered a while back.

    After being inundated with hits, and requests for product, it sounds like his lathe has up and died.
    For those who don't know, as well as the WTF, TiKey sets and the TiPiK's (review to come this week, I hope), Brad is also the creator of the Bottle Grenade and has his fully funded TiPen project in the midst of production.

    Brad needs your help need help! His lathe is going to cost 4-6k to fix, so he is doing a massdrop.

    MassDrop link for the mini-TiKeY & TiPiK sets
    https://www.massdrop.com/buy/tikey-tipik

    also one for the WTF's
    https://www.massdrop.com/buy/wrench-that-fits

    Tuesday, December 17, 2013

    Review: Tactical Keychain - TiKeY key holder

    In order to try to maintain some discipline with my EDC keychain, I was pleased to back the third Kickstarter project by Brad of Tactical Keychains. What he offered was a fully customisable key-keeper, specifically designed to fit hit fabulous WTF tool. I've had awesome dealings with Brad, not only getting some pre-release items, but also the down-low on the Ti maker community.

    Not only does Brad make cool things, but he also offers a great deal of "artistic control" to his backers, with a variety of anodisation options for all his builds, and updates from his machine shop.
    The idea behind the TiKeY is that it gives you a milled billet G5 titanium, Quick-Flip means of storing your keys, avoiding the jing-jangle, or "I landed on my keys" thigh injuries. I have always seemed to have a janitors keychain worth of keys, not to mention my ever increasing keychain-tool collection

    I opted for the deluxe version, with both the countersunk "pockets" for grip and dropping the weight, and countersunk bolt-holes, to let me jam a little bit more in, along with longer screws for the same reason. I also opted in for several additional elements, the TiFoRk, with its three-tined pointy Ti utility, for those times when the last mussel in the tin is eluding me in the bunker, I have been really impressed with its simple efficacy. I also opted in for the lanyard loop, the simple guitar pic shaped loop, giving me a means of attaching my TiKeY to my larger set (yes, I am aware of the irony here).


    I also have a prototype "BottlePik", can/bottle opener which Brad was kind enough to send my way. This ergonomic little Ti blade features a chisel ground two-edged cutting surface, as well as a 1/4" hex driver and a lanyard loop at the tail end, as well as the 1/4" measuring notches that both the WTF and the sides of the TiKeY feature.

    Lastly, I have the prototype TiPiK on mine, separate to the full set I have (review to follow).

    Here is a shot of the BottlePik in use, which shows off how the TiKeY fits in the hand. At 3.5" x 1" the key holder fits in the palm very nicely, and the 1/4" ruler notches, along with the recessed pockets gives it a very controllable grip.

    With the two different sizes of screws available, the TiKeY can accommodate 4-10 keys (4-8, 6-10), with the countersunk wells giving even more room. the corrosion resistant spring washers give you a snug fit to the contents, without being stiff, or grinding. The included plastic tubing can be cut into gap-filling lengths (ive used two different lengths to ensure my TiKeY is spaced the way I like

    You might ask "why is how you keep your keys of any importance in a disaster situation, how is it relevant?"

    No jingles, for one thing, this greatly reduces the jingle-bell chime of my keys. It also allows you to have a mini-tool kit on hand, safe and secreted. Much like a pocket knife, the items you can put into a TiKeY are only limited by a loop-hole, and your
     imagination!


    Hot Brad up if you want one, via
    http://dro.ps/tikey-tipik
    or
    http://tacticalkeychains.com/?page_id=167


    FOLLOW UP:
    http://apocalypseequipped.blogspot.com.au/2014/01/home-front-help-brad-out-wtfs-tikey.html
    Related Posts Plugin for WordPress, Blogger...