Showing posts with label canvas. Show all posts
Showing posts with label canvas. Show all posts

Wednesday, June 26, 2024

Review: Kings Adventure Big Daddy Deluxe Double Swag


In a similar vein as my review of the capable and functional SnugPack Stratosphere Bivy, and from the same birthday purchase splurge last year I also picked up a luxury camping item from Kings Adventure in the form of the Big Daddy Deluxe Double Swag.

Though I tend to prefer hammocks for the "off the ground away from pests" and low footprint aspects. Having a good flat lay can be hard to achieve in a suspended hammock, and its nice to have company that isn't all pressed elbows and knees or bunk-stacked hammocks. For this reason I looked for a double bed style swag.  

 
Kings Adventure was on my radar as source of gear, having seen them at Melbourne Camping and Caravan ShowMelbourne Camping and Caravan Show and having bought my camping stove from them having bought my camping stove from them . A happy medium between tent and bivy bag, a swag like this aa swag like this a self contained bed and shelter system.  

Constructed from waterproof & Ripstop 400gsm canvas, with a heavy-duty waterproof 450gsm PVC bucket floor base. The two arc ends are supported by tent poles with clips, fitting to pegs held in split rings at each corner, have been upgraded to 10.2mm diameter for extra strength. The ends are held up by a telescoping alloy spreader pole, which also connects to polyester clips to lift the roof and keep the whole structure taut and self-standing. Corner pegs and end-flap guy lines help keep it secure and stable. 

Side flaps open all the way with heavy duty zippers on both sides, allowing easy access for either person ( as its a double) and bug-proof mesh with full zippers round out the build. Set up, the Swag is a spacious 2.15m (7') long and over 1.55m (5'1") wide, at the peak of its arc it is 96cm (3'1") high. Internally, both head and foot ends have a zippable window panel, behind more bug-mesh, and under storm flaps, allowing good airflow without compromising comfort. The real selling point for me, beyond the large footprint, was the included mattress. The ripstop fabric covered and free-floating pad is 7cm (2.75") thick, fully expanded. It's so comfortable. 

Not only was it soft and padded, it also breathed and I could lay on it without matt or blanket without getting sweaty. The ceiling has loops for tying up the side flaps if they are up, but when down they serve as good tie-in points for a lamp or in my case to store my glasses whilst sleeping. 

The heavy 400gsm canvas is weather proof and shady, allowing for afternoon naps as well as shelter from harsh sunlight as needs be. 

Overall, I enjoyed sleeping in the Swag far more than I did in the Stratosphere Bivy, primary because of the mattress but also the roominess. Not having the skin of the Bivy pressing down on me made it a lot more comfortable. No shade on the bivy, but the more tent like Swag was a treat. 

Tactical Baby and I camped out over a couple of nights and we did side-by-side camping, swapping after a night from bivy to Swag and we both agreed the swag was the more comfortable. 
We hiked in to our site, and initially I had rolled the swag up in a single layer, so was a wide bundle at a little over 1.55m (5'1") wide, I carried it draped over a shoulder but I had rigged a sling to carry it at the small of my back on the way back which was more convenient but still wide. 

The swag only weighed 14kg, so its no trial to carry, even with the regular camping load, but once home I found I could double it over and roll it up to make a much more manageable bundle at 80 cm long x 50 cm across. This was possible with the built-in straps and double-D-shackle binders. The bundle was thus smaller and more manageable to transport and pack out and in the vehicle. It's obviously not as easy to ruck in as a bivy, but the luxury it brings is palpable and welcome, making up for the minor inconvenience . Better than hauling a full sized tent for sure. I haven't had opportunity to put it through a solid storm-test, but the construction seems solid and the stitching tight.



Thursday, May 10, 2012

Review: Australian Army Butt Pack

I've reviewed a lot of modern packs and pouches, almost all of which I use regularly, or plan to in the event of an emergency. Cordura, nylons and all the modern trimmings. However, there is a lot to be said for the packs that were cutting edge or at least fit for purpose in yesteryear. These are the pieces of kit you find in op-shops, and in discount-barrels at Army Surplus and Disposal stores. This is one such piece. The OD Canvas Butt Pack one of several I have, from a variety of sources but here is the one that I use more often. The name comes from the position you wear this on your belt, right at the back, at the small of your back. Silly name, good pouch.

The heavy "government issue" 20 oz canvas pouch comes with a fold-over lid-flap that features a name-tag pocket as well as a carry handle. The lid-flap is secured by two metal fittings through which thick canvas pull-straps feed to give a easily fastened and openable lid. A series of riveted eyelids line one side of the lid, I'm uncertain what this is for, but i threaded a length of paracord through them. You never know. It also serves as an attachment point for other kit.



The back of the pouch features two sewn-in Alice keeper clips, another pair of canvas pull straps, which act as compression straps matching with another set of metal fittings found at the front of the pouch. A set of eyelets can be found at the top of the pouch, on a pair of reinforced canvas toggles. I've used these to fit a shoulder-strap to turn the belt-pouch into a slingable one. Useful if you have several of them, want to pass the contents from one person to another or any other reason to not have it physically attached to yourself, but still hands free. Simple really. The wide canvas belt around the pouch looks like standard 50mm webbing, and has a couple of extra loops for Alice keeper clips, and two extra wide loops for slinging other kit, one on each side of the pouch.



The inside of the pouch is really quite spacious, and I can fit two of the "3L dead people jars" in a pinch, with a little extra room, with measurements of 23cm x 21cm x 15cm (9" x 8.5" x 6") or around 7.5 L (2gal) giving you an idea of the capacity. Nothing to be sneezed at. The inside of the pouch is lined with plastic, making a pretty waterproof container. There aren't any drainage grommets and it doesn't seal shut, but is certainly dunkable and rain resistant. I expect it could act as an improvised bucket as needed. This may not be what you want after falling into a lake though.



One interesting feature is the large turtle-neck sleeve of the plastisised lining, which allows the user to fold and cover over the top of the pouch, before closing and securing the lid, to offer some water resistance. It also acts as a secondary means of securing your load, even when the lid-flap isn't fastened. I previously used this as part of my Stargate lasertag LRP kit as a dump bag, which I replaced with the Platatac gas-mask bag but I still take a couple of these with me, with shoulder slings attached. I also gave one to my step-daughter to use as a bug-out-bag when she expressed an interest, following Season 1 of Walking Dead.

These are great pouches for what they are, tough, dependable, and if you can find one in good condition, that hasn't been trashed by it's previous owner, I expect they will see you through pretty much anything you care to throw yourself into.






Related Posts Plugin for WordPress, Blogger...