Review: Platatac - S&M Side Opening Pouch

I follow a couple of gear swap-buy-sell groups online, and every now and then something comes up that piques my interest. The last time was my Condor Plate Carrier, which I've enjoyed running in at a few events, and was value for money second hand, for my purposes. A bonus from that deal was the carrier had a couple of extra pouches that the guy "threw into the deal". One of these was the pretty recent Platatac S&M Side opening pouch. I hadn't thought to get one of these of its own merit, but having had one in my collection now, I can see this may have been a mistake.

One of the first things I noted was that it looked quite different to my other Platatac pouches, which mostly run into the magazine pouch category, but certainly had the same quality of construction that I'd expect of their products. Constructed of 1000d Cordura, and double stitched throughout. The big-enough to be strong, small enough to keep grit out No.10 YKK zipper wraps around three of the four sides, but interestingly, not top to bottom, but from the side. The twin zipper pulls are equipped with nylon extenders which are grippy, but snag-free.


One of the things I really liked about this design is that the front panel has a broad lip, that can completely wrap over the zipper, giving you a fully Cordura enclosure, even of the pouch isn't fully zipped up, and eliminating rattle, and giving further dust and water protection. Inside, the pouch measures 15cm (6") x 10cm (4") x 4.5cm (1.75"), giving you quite a lot of capacity for personal electronics, like a GPS unit, strobes, a survival tin or small medical kit, or even snacks or drinks.

The internal of the pouch only has one feature in particular, a wide, broad band of elastic webbing, too big for the strobes I have, but perfect for a 600mL bottle sized item. No extra flaps, pockets or anything to get in the way. One thing that was obvious though is that all the seams were really well finished off, no bare edges or seams to catch or fray. The non-zipper side features a big chunky drainage grommet, which even though it's on a vertical face, gives a good headphone jack access point, or dummy-cord lashing point.

Attachment is via twin channel PALS/MOLLE straps and takes three rows, to give a pretty solid connection. The "handedness" of the pouch is simply governed by flipping the way you attach the pouch, with the PALS/MOLLE connectors feeding "up" rather than "down" to have the opening side either way. I've been using this pouch on my baby-poo khaki-green gear, and Multcam, but threw it onto my black pack for contrast, but really, it's smooth lines and snag free profile don't really make it stand out. Perfect for all your small S&M needs. Cuffs and gags, anyone?

Review: Platatac prototype hydration carrier

Here is the hydration pack that I have been using for the last few Tough Mudder events I've done. This is an old prototype from Platatac that I picked up on eBay, and combines elements of both their Bravo hydration carrier that I have, and the MEOP Medic Pack both of which I've covered in the past, and are great pieces.

I found that wearing an extra set of straps was redundant when I was wearing a vest anyway on my Tough Mudder and similar adventures, which is why I looked for an alternative to the Bravo, which has served me well in other situations, and on my first Tough Mudder. When I saw this piece come up on eBay, I was thrilled to give it a go. It follows the same kind of design philosophy I've come to expect from Platatac pieces, with a tough 1000d Cordura exterior, and ITW Nexus hardware. It if "faced" with 6 rows of 4 channel PALLS/MOLLE loops, and features a hook-and-loop secured drag handle. Running down the flanks are nylon D-rings, three to a side, allowing shock or paracord to be run through these, to provide attachment points, or compression.

The wide-mouth of the pouch perfectly fits the Source Storm 3L hydration bladders main cap.

The baffled sides of the carrier allow for quite significant volumes to be carrier, without restriction, or perhaps even storage for other items besides a hydration pack. However, this particular piece lack the zipper-access of the Bravo, which means that the only access into or out of the inside is through the main cap.

This actually posed a problem when trying to run my hydration hose through it, and I bit the bullet and melted a channel in the backside to feed it through.

I also had to melt a drainage hole in the bottom, following the previous Tough Mudder, last September.
I found that the carrier filled up with nasty pond water when I took my tumbles, which really added to the weight I was hauling. No such trouble with a small drain hole melted in this time around.

The back of the carrier offers a variety of attachment options; Zippers paired with the MEOP carrier (which allows me to sandwich these two pouches nicely). It also features female Fastex clip ends top and bottom, tri-glide loops for all your clipping and looping needs. Best yet, the back features two sets of three three channel PALS/MOLLE PLMRS (Platypus Light Modular Recovery System) strips. These gave both a rock solid attachment and also load spreading capacity. I barely felt the 3kg that the full bladder weighed,and certainly not the sloshing side-to-side I might have with a pack-type carrier.

This was just a prototype, bridging the gap between the Bravo and the MEOP, but if you want to see the new production version, check out the Platatac Utility Hydration Cover. Looks like the logical next step.

Update: 5.11 Tactical - TDU Kilt re-release

The good folks over at Soldier Systems have reminded me (and now from me, to you) that 5.11 Tactical have re-released their Tactical Kilt.

I love mine, in fact, I'm wearing one right now. I brave both weather and the harassment of the ignorant (and actual Scots) to be comfortable and bad-ass. Pants are tyranny and I love freedom. Don't you?

Check them out at:
http://www.511tactical.com/kiltoff
http://www.511tactical.com/tactical-duty-kilt-134360.html
and hopefully on http://www.511tactical.com.au/ soon

Available with the following colors: Khaki (a greenish brown), Coyote (a tan brown), TDU Green, Tundra (a deep green), Charcoal, Dark Navy, Black, original MultiCam, and Realtree Xtra and in sizes 28-54.

If that wasn't cool enough, 5.11 are also donating $10 from every kilt sold to FBINAA and We Salute You Veterans.

Review: Original SOE Gear - Combat Cock

Awaiting me when I got home recently was a package from Tay of Hornest, Singapore. Tay and I have worked together looking at some cool kit previously, like the Helinox Packable folding chair, the Jil Lite UV light and the Jil Lite Constel LED lantern as well as a bunch of other cool things.

This most recent item is a lot of fun, just for fun. It's time to rock out with my cock out, behold, the SOEGear Combat Cock.

Crafted from 1000d cordura nylon, the Combat Cock is fitted with a length of 1" webbing and a tri-glide buckle under the tail-feathers to facilitate attachment to any number of items.

Each flank of the Cock is fitted with a 75mm x 50mm (3" x 2") colour-matched loop field for attaching your favorite patches, I've thrown on one of my also-new MOTUS/Hornest exclusive patches.

With drainage grommets for eyes, and a hook-and-loop opening on the underside to access the stuffing, for either re-fluffing, or replacing it with what-have-you. It could make an innocuous stuff-sack for secret needfuls, even SERE gear.

I've been thinking about stuffing mine with a Headover to give it double duty as a fun accessory, storage as well as an impromptu travel pillow.

I really like this little guy, and look forwards to photo-bombing a bunch of things, places and events with my khaki Combat Cock! Get yours now, we'll see who's has been more places ...

Review: Platatac - Leg Rig

I was looking over my collection of gear and realised there were a couple of items that have quietly gone un-reported, little pieces that seemed to take a back seat over their flashier cousins, and I wanted to give them some web-space too


I've shown this piece, in use, a couple of times, in my "No, Really" post, and coupled with its usual attachment, the Young Guns belt. However, it deserves it's own review. This is the 3/4 Leg Rig by Platatac.


I've covered a drop-leg holster in the past, and I have to be honest, they bring out the Han Solo in me ...

This was an early model of their now more mature Leg Rig but it serves me just fine. The three main features of the rig are: a  3 channel by 3 row PALS/MOLLE field, which is built on top of a 1000d Cordura with a stiff plastic reinforced backing platform.

Twin straps wrap around the thigh, and are half elasticized and half webbing backed with hook and loop. This gives you two different ways that you can adjust the fit, as well as it having sufficient flex to accommodate the changing dimensions of the thigh whilst running, climbing or scrambling. Anyone who has worn a non-elastic cuff whilst doing any of that kind of thing will tell you, its no fun. Two bands divides the load, and gives you a better fit to the shape of the thigh.

The "inside" of the rig shows us the way the mounting strap attaches, with a hook backed strap and a loop-faced side on the inside, to avoid abrasion. This gives you a really wide latitude for adjustment up and down, to ensure the best fit for your rig.

This was really good for me, as I have really long skinny legs, getting a thigh rig to sit right can be a real pain for me.  The thigh straps are free-sliding, and run through the middle of the rig, meaning you can customize the buckles and which thigh you wear it on to suit your need.

On top of the mounting strap, connected to a slider ring, is the belt clip. With both a hook and look backing, and two press studs, the belt clip not only bites down hard, and is adjustable for different bet sizes, it can also be woven into the middle of a riggers belt such as the 215Gear Ultimate for an extra secure and non-slip fit.

You can add any PALS/MOLLE capable item to the rig, I usually wear mine with my Drop Gas Mask bag as a dump-pouch, but could just as easily fit it with any 1, 2 or 3 channel PALS/MOLLE kit I wanted. The newer Platatac leg rigs are 4x4, giving the wearer a little more real-estate to mount on, but i have skinny thighs, and plenty of pockets already. I've been considering getting another, in the "more subdued" black to wear out and about, I've had similar rigs in past, but my colour pallet has lightened over the years...

Review: Platatac - SGL 5.56 stacker pouch

I haven't done one of these for a while, and have been feeling remiss, but here is another pouch, my not-so-secret guilty pleasure.

I've been trolling their eBay listings, and found this great item from Platatac. It's well worth your while to have a look at these "factory clearance" listings for a chance to sweep up some unusual, trial or end-of-stock items. This pouch for example, is their SGL 5.56 Stacker, not listed on the new updated website. Collectable, even!

It is clear that the SGL stacker shares lineage with the much loved FUP and Mk1 60rnd pouch. I also noticed that there were, as I've come to expect, some very interesting design features and little extras tucked away.

Made of the rough and tough 1000d Cordura I've come to expect of Platatac accessories, the pouch consists of a long tongue of webbing, sewn into the base of the front of the pouch, which then feeds into itself, over the top of a stiff webbing loop that acts as a base-stop. The tongue travels up into the pouch, over the top, and fixes with a broad band of 4 loop-field strips.

Running from one side to the other, in the middle of the pouch, is a 2" band of elastic, which acts as a built in compression strap, locking contents into the pouch. The band is sewn into the backing panel, and runs freely under the middle two bands of loop tape that make up the closure system on the front of the pouch. This makes the pouch extremely low profile when empty, as the elastic binds it right down.

I was interested to see how the bottom loop of webbing acted to hold contents in, but when combined with the long, wide webbing tongue, it locked in nicely, and didn't give me any worries about storing my iPhone, a notoriously droppable commodity.

Here's one of those little additional features I was talking about. When I first got the pouch, i just dropped the tongue through and flipped it over the top. It worked, both closing out the bottom against the webbing loop, and made a positive lid closure over the top and front.

What I didn't initially notice, till I looked properly, was there was a big wide band of loop-field running about mid-way through the pouch, that allowed you to feed the tongue under it, giving a much more secure connection, ensure that you don't accidentally feed a magazine "behind" the tongue to drop the bottom inconveniently, but also with its loop-field fronting, allows you to back-feed the hook-ended tongue in to make a more "high-speed/low-drag" option for those of you who like that sort of thing, without needing to cut away the webbing.

The backing is standard for a Platatac pouch, with twin sets of PALS/MOLLE loops and press-stud closure tabs, but its also worth noting the built in loop, for extra attachment options.

I was uncertain how this pouch would stack up (so to speak) but was pleasantly surprised. Obviously, its primary purpose is to house 5.56 magazines, and certainly has the length to accommodate quite long options, without the bulk of a full-cupped bottom like the FUP. This does however mean that it is somewhat unsuitable as an accessory pouch, as small items will be at risk of falling out.

 This is a really interesting piece, and it was also very interesting to see how the range has developed.

Stay tuned for more as they come up!

Review: TruSpec Combat Shirt

 I snapped up this shirt from eBay, and have gotten a lot of utility from it. Not surprising considering its design origins.

This is the TruSpec Combat Shirt from Atlanco.

The key thing about this kind of shirt, and the reason I wanted one, was that it combines a 60/40 cotton/nylon blend t-shirt material body with a rugged 65/35 polyester/cotton ripstop blend arms and shoulders. Cool and comfortable torso, tough and rugged arms and shoulders for hard wear and outdoorsy adventure.

Basically I wanted a work shirt that would be good to wear in the long hot Australian summer, in or out of my gear. I always look first to military gear, because i know that it is often built extra hardy, and, essentially, for badassness.

The TruSpec shirts however, have added functionality that is well worth covering. As well as being a breathable, wicking and fast drying ,aterial, the "No Melt, No Drip" Cordura Baselayer fabric is reported to reduce the severity of burn injuries and helps protect against flash fires.

Considering my proclivity for being too close to fires, both controlled, wild and just being stupid, I thought this was a great additional feature that whilst I didn't intend to test to stringently, would come in handy.  As well as what it is made of, the folks at Atlanco gave some thought to those who might be wearing it, and what other utility they would look for. Both biceps house a zippered storage pocket, angled for ease of use.

They also feature loop-fields for attachment of patches, here i've got one from Strike Industries, who make the Simple Plate Carrier pack and Tactical Sling Catch i'm so fond of. 

I've also got a double sided call-sign panel from PatchPanel and one of their IR IFF squares in the built in tape-covered area. Very clever way of making this a "need-only" system of ID.

The other arm features flag, rank and nametape fields, as well as the zippered pocket.

You can also see here the padded elbow patch, with its double stitching and placement to really add to the build.

It was also great to not e that there were no shoulder seams, and all the seams were flat, which really minimizes chafing and pinch-spots, especially noticeable when carrying a pack, or doing repetitive work like chopping wood or digging in a field.

I also liked the cuffs, which also featured hook-and loop closures, to keep nature out, but also the gusseting that kept the fit true.

They offer these in several different sizes, in a variety of colour schemes. I opted for Large/Long in order to accommodate my super long arms, but could have done with a "medium" body fit, i think. The Khaki/Sand option sat nicely for me. You can see here how the tough shirt sleeves poke out of my First Spear OAGRE vest, whilst my torso has the softer wicking cotton/nylon t-shirt.

All in all a very comfortable, rugged and practical shirt, and one that I expect to get a lot of hard wear out of, no matter what I throw at it, or myself into.

Review: Platatac - FFE holster

I've mentioned before how good it is to be able to go to a supplier with a problem, and ask for solutions, without getting a hard sell. It's one of the reasons I am so fond of the Platatac guys, and why I point people in their direction when I get asked for equipping questions.

Here's a case in point.

When at Confest I did a bunch of wood chopping with my trusty Fiskars logsplitter and needing some way to carry it about, I slung it behind my Bravo hydration pack. Not very comfortable, but it worked. I wanted a better solution, and posed it to the guys at Platatac.

This is the Fix Freaking* Everything FFE holster. The idea was that the head of the Fiskars axe could sit in the throat of the holster, buckled down and snug under the dual press-stud and hook-and-loop safety of the fully adjustable retention straps. Alas, it was not to be, the geometry of the axe and holster just didn't match up.

However, I did get to play with a very cool holster, which they kindly loaned me to test out the theory.

Here's what I can tell you about it.

Constructed from the same 100d Cordura that almost all the Platatac range is built from, this multi-layered holster is stiffened throughout with extra stitching and layering. This gives it a very sturdy and form fitting shape, perfect for weapon retention.

The back side features two channels of 4 row PALS/MOLLE strapping, which gives a very solid attachment to a chest-piece, thigh rig or belt.

Opening up the outer layers, you observe the multiple sandwiching sides of hook-and-loop, giving you a wide range of customisation, both in models of handgun (like, in the extreme, my Plastation lightgun used here) and also accessories (lights, sights).

This is accomplished by having those overlapping layers of double sided hook-and-loop panels, allowing the fit to contour to the system carried. You can see here that the retention strap itself can also be adjusted, to conform to the  back geometry of the pistol retained.

Unfolding further, you can see that the inside of the holster also features a webbing loop, to form a pocket to contain the muzzle end.

From this angle you can also see the snap end of the press-stud retainer. This is also adjustable, but is very tightly fitted between two very closely sewn layers of hook-and-loop, making it a tricky operation, but a very ridged hold when in place. This retainer is further stiffened with a rigid plastic core, for added security.


 Opening the holster up flat exposes more clearly the single channel of three PALS/MOLLE loops, allowing the addition of a single pistol magazine or accessory pouch, to the leading edge of the holster.

Comparing this to the drop-leg holster I reviewed a while back seems unfair, because this is obviously the real deal.

So, an experiment that didn't work out, but a very useful one, and in the end, I -DID- come up with a solution to the "carry the axe about" problem, with the help of the guys.... to follow soon ....



* Actual wording my vary, but I adjusted for delicate USAnian readers.

Review: Global Gear - Zombie Outbreak DeadHeadvest

Here is another fun piece from the Global Gear's Zombie Outbreak "Tactical Response Gear", which I've already covered some items from, the Hydro Bugout Pack and the Grunt Plate Carrier.

This time, it's another chest rig, the Dead Head Tactical Vest, in the same multicam looking pattern as the Grunt Plate Carrier, and in this case, is very similar tot he look of a couple of other vest's I've seen come up recently on Dvor: and OpsGear as well.

However, Global Gear is local, and I'm always keen to cover things that local businesses  stock. No point having to wait 6 weeks shipping when the zombies come, is there?

What can I tell you about this vest?

Firstly, like the Grunt Plate Carrier, the pouches are made of a textured vinyl, finished with nylon webbing. This isn't as big an issue for me on this vest, as the backing is a nylon mesh material, to which the pouches, webbing and other panels are sewn.

The left side front panel of the belly of the vest is covered with loop-field, to which is attached a twin magazine pouch panel, with a retaining loop of webbing. This can be swapped out for the included "fast draw" pistol holster, which for some reason comes attached over the left shoulder. (More on that later). As well as the removable twin-pouches, the left side features a single fixed magazine sized pouch. Above these are a triplet of pistol magazine / flashlight/ utility pockets, and a small radio pocket at the left shoulder.

Over on the right side, over the fairly chunky mid-line zipper, are three more fixed magazine pouches, each with the elasticized sides, hook-and-loop fixed lids and drainage grommets that this line features. Above these lays a wide admin type pocket, that has a panel of four shotgun shell loops of elastic attached to the lid with hook-and-loop. these could be removed to put a nametape or ID to the chest. The right shoulder is fitted with a thinly padded patent-leather panel, as a shooters-rest.




The back of the vest features three sets of three reinforced bands of nylon, like a kind of "super PALS/MOLLE" which is apparently for fixing larger tools to. This is actually a pretty good idea, as I'd like some way of attaching my Stanley FUBAR, my DeadOn Annihilator Superhammer my Fiskars log splitter or the ever needful Deuce by Zombie Tools to my rig, and these loops offer a means.

You can also see the "quick-draw" pistol holster that is currently attached to the back, left shoulder. Why you'd put a pistol holster here is a bit beyond me, unless its there for a buddy to draw, but I made use of it anyways, slotting my RangerHawk axe in it because I'm fond of keeping something handy for close encounters....

The pistol holster includes a small pouch for an extra magazine, or perhaps in this case, a sharpening stone. A hook-and-look lashing secures the holster through one of the d-rings present on top of each shoulder.

 A couple of neat features are that inside each of the front panels is a zipperable pocket, for paperwork, or items you want to keep more secure. The main back panel also features a hydration pouch pocket, behind a hook-and-loop seal, although there are no attachment points to hang one.

The vest comes with a wide belt, adjustable by virtue of being hook-and-loop sandwiched between nylon webbing, with a big fastex style buckle. Each side of the belt features a removable single pistol magazine/flashlight pouch, and is mounted tot he vest by virtue of a set of press-stud and hook-and-loop loops.

You can see here the three size adjustment straps for the the torso, fairly standard, but a great add to be able to adjust to fit yourself comfortably. One issue I had was that the chest piece seemed too tall, in that the front and back sagged a little, although I may need to adjust the shoulder pieces, but this only does so much.

I found that this vest was a  higher quality construction than the Grunt plate Carrier, mostly by virtue of not being mostly all vinyl, other than the pouches, and it certainly would suit a costumer, recreational hunter, weekend adventurer or MilSim player very well.

Review: Platatac Light Field Pack

Time to have a look at some of the big-bags!

When I started doing more camping, whilst in Calgary, I got my first "big" backpack, (which I may dig out and go over, some day soon). Whenever we traveled as a family as I was growing up, we had a policy "pack only what you can carry" so I got pretty good at packing well, and also lugging heavy bags. A better bag means better packing, as well as easier carrying.

Having learned these lessons, I have frequently loaded my EDC bags to such a point that they became unwieldy, leading me to downsize from my Crumpler Messenger bag, to my faithful and very versatile Platatac Bullock Echo but there are times when you really do need to haul a bunch of stuff, either bulky items, or in high quantity. When this is the case, a little day pack just wont cut it. You need a proper backpack.
This is the Light Field Pack from Platatac, and it does the job!

First up, like almost all of the Platatac bags, this one is made from the rugged 1000d Cordura I've come to expect. Slick and hardy, no rough finishing, just an all over, well put together package with quality materials. The pack comes in two main components; the main body, and the removable helmet cradle and internal organiser.

The front of the cradle has 6x8 PALS/MOLLE, including a 4x2 loop field for name-tape, patches and the like. It has Fastex style buckles to connect to the compression straps on the main pack in three different locations, top, middle and bottom.

The strap-side of the pack is a sculpted, heavily padded and well fixed set of straps, with built in D-rings, adjustable and movable sternum straps and well placed, Fastex-style clips at the base of the traps for both quick release, but also comfort when wearing.

Here's a side view, showing off the 35L  capacity of the main pack, as well as the extensive 5x8 PALLS/MOLLE channels. The compression strapping is maintained on the sides by sets of Web Dominator clip. The flap at the top right of this picture is an access port, for hydration tubes, cables or running line. 

You can also see the triangular "wing" that the shoulder straps connect to the pack via on the bottom right, as well as the helmet cradle. My OpsCore style bump helmet fits nicely in the cradle, but I've also used it extensively as an "extra cargo spot" to carry my bundled kendo keikogi which is both bulky and needs airing, after training, I can tell you.

I've found that I have been able to rapidly adjust the tension of the compression straps to fit my load with a quick pull and readjusting of the leftover webbing via the Web Dominators. The nylon eyelets the webbing runs though doesn't interfere with the PALS/MOLLE channels, which is great for those who like their pouches as much as I do.

The inside of the fully openable main compartment is also fully PALS/MOLLE lined, for all those pouch-addicts I just mentioned. As well as a 3/4 length zippered pocket on the inside, the outside of the  main compartment flap also features a deep zippered pocket, and another, very large loop-field, for more patches, ID and the like. 

You can see here that I have stored my kendo armour in the main compartment, with the big helmet, gauntlets, chest-plate and groin plates wrapping the lot up. It was a tight fit, but once the pack had loosened up, I have been able to cart my whole kendo setup (baring the shinai/bokken) in one bag, with a drink bottle attached by PALS/MOLLE to the outside. 


Inside that main compartment there are a vast array of options as well. On the right side, a very large zipperable pocket, good for documentation, maps, briefings and the like. The bottom of the pack features another of the zippered pockets, good for tools and other heavy items. The back face includes a third zipperable pocket at the mid-line. 

As well as the zippered pockets, there are two elasticised hydration pockets, one at the back, and another on the left side. loops throughout the internals give a variety of dummy-cord, or shock-cording options, as well as acting as hanging points for hydration bladders. I'll be fitting a bladder to mine, to take the place of that externally attached bottle holder. 1L just isnt enough water for me after training, and the added weight going in isn't an issue. It will get lighter before I get home, that's for sure.



There was one more zipper, hidden away at the bottom of the back of the inside of the pack. By turning the pack inside of itself, you gain access to the built-in, moldable lumbar support.

This stiff plastic body has a reinforcing aluminium bar, inside a nylon sheath. This can be molded to offer the best support to the pack, and it also gives the whole thing a considerable amount of rigidity, making for easy packing, unpacking, and sitting up, when being accessed.

Drainage holes throughout the pack ensure that unexpected (or deliberate) dunks don't leave you hauling 35L of bilge around with you either. Stitched or grommeted, I'm glad they're there.

 

Another great hidden feature is the hip-belt pad, which as well as featuring a 3x4 PALS/MOLLE surfacing, and deep padding. The hip belt will clip together to give a very stable belt, perfect for long hikes with a heavy load. For those times when you don't need this kind of extra support, and don't want all the extra real-estate hanging out in the breeze, they have their own little pockets, which are hook-and-loop closing. When tucked up they are hardly noticeable and certainly don't add to bulk, or take away from storage space in any appreciable way.

Here's the inside of the helmet cradle, showing off the webbed "hinge" between the PALS/MOLLE attachment and the front flap. This forms a very useful "bucket" that you can drop your helmet, or other cargo into, secure in the knowledge that it will stay put, and you wont loose any little items"out the sides" between straps as you might in a open-bottomed beaver-tail. 

You can see here the three sets of compression clips, as well as one of the multiple loops for running a retention cord, or shock-cord through. Loads of extra features!

Here's the inside of that helmet cradle front-panel. "The Office", as Sam from Platatac called it.

On the inside of the lid, are two mesh-lined, zipperable pockets, one running the whole length of the panel, the other, midway.

On the bac of the compartment, two more zipperable pockets, the lower of the two being bellowed for easy stuffing as well as three elastizised pockets at the bottom.

This is a serious admin pouch, and there is plenty of versatility to cover all your gadget storage. I have carried my iPad, chargers, pens, paperwork, and food in this section, but be aware, having a helmet in the cradle will press up against the contents... pack wisely!

As with the rest of the pack, all the zipper pulls are threaded with paracord, for ease of grip, and deadening the metal-on-metal clinking.

Here is the whole pack from below, you can see the grommets on the cradle, both inside and out, as well as the sewn-in drainage eyelets of the main compartment.

You can also see the PALS/MOLLE connectors of the cradle piece tot the main pack, with four tabs, in channels 1, 4, 5 and 8. Bear this in mind if you plan on trying to swap the cradle onto any other packs.

Lastly, check out the 3x8 PALS/MOLLE on the bottom. This pack is BUILT for accessories!


Lastly, I wanted to give you a few shots of the pack on me, whilst bearing a load.

DEPLOY TACTICAL BABY!

Sitting happily in the back of the pack, with two sets of compression straps securing her, Tactical Baby was comfortable enough to be walked around for a while, until asked to stand up and wave.

At no point was the pack unstable, or did I feel any way at risk of spilling my precious cargo, (although I made sure I was over the bed when she stood up)

She just held onto the built-in drag handle and I have my very own Pink-Yoda ,

This is a serious pack, good for times when you need more than just a day-pack, but not quite the kitchen sink.

If I had any gripe with it, it would be the way I was using the bottom compression straps when I wanted to open the main compartment, they held it shut beyond the zipper pulls a little, but not so much as that I couldn't easily unload, just not "flat".

It is thoroughly dependable, comfortable to wear and haul loads in, even in the muggy Melbourne summer, slings on and off easily, without snagging and is filled with features.