Events: Snow trip - gear summary

I was lucky enough to be taken up to the snow for my 40th birthday not long ago, by my mum, who kindly took my whole family up for a long weekend at the Falls Creek snow resort in the Victorian Alps. Snow, in Australia? Yes, it snows here. Sometimes, in a few places. When we went there was a base-cover of around 80cm and it was forecast to be between -3oC and -6oC, with 24cm sow expected each night, or thereabouts.

It was a 5 hour drive, including an hour on the shuttle-bus, as we didn't want to go through the hassle of snow-chains and on-mountain parking, as well as windy, icy mountain roads. Leave it to the professionals, I say, and have a nap on the way.

That said, when we arrive mountain-side, it was sleeting pretty heavily, and continued to do so for the majority of the day. We lost a bunch of snow cover and everybody got damp. Some more than others. That's kind of what I wanted to cover in this post. What I wore to stay warm and dry. What gear  I took.
 Now, I cheated to some extent in that I hired ski-boots, and the outer-layer jacket and ski-pants for when we actually went skiing, (my first time in 20 years, since I lived in Calgary, Canada).

However, I also packed accordingly, for the times I wasn't skiing, and I'm glad I did.

I've had quite some experience in cold climates, both Canada, the UK, Danmark, as well as holidaying and I know they key elements to not having a bad time are to stay dry and warm. Not always both, but if you are one, or the other, you can usually get by. Cold AND wet? You're going to have a bad time.

Here's my layered approach to a trip to the snow:
I wore as my base-layer, the Platatac fleece leggings, and DriFire long sleeve shirt. I don't have any fancy socks, but tend to get hefty heavy-duty socks from the supermarket and wear them to death These ones are Kirkland's,, from Costco. nothing special, but long lasting and don't get stinky.
I wore my Danner Striker ii GTX combat boots, which could do with a thorough polishing, but I hit them with a liberal coating of Kiwi boot waterproofing spray and they worked a treat, even when I stepped through slush up past the ankle. Be sure to open the laces right up if you're waterproofing boots, and get in around the tongue to ensure you don't miss any leakage points.

I looped the leggings foot-hole stirrups over my socks, so they didn't ride up, and I had full coverage from toe to belly-button. Tucking my shirt into the elastic waist of the leggings then carried that all the way up to my neck. No cold draughts.

For my outer layer, I took my snow-proven Propper Adventure Tech shell outer pants, which offer a wind and water proofing layer that I really appreciate. They don't have a lot of pocket real-estate, but I made do, and didn't either loose anything, or lack anything on my adventures.

Over the DriFire shirts, I wore the lightweight Propper windcheater which provided me a really good lightweight dry-layer, as well as having a good neck-seal. My one was a bit too shirt, so my super-long arms tended to poke out, but I had a plan for that anyway.

As my outermost top layer, I chose my Baubax multi-function jacket, which is a semi-hard shell with a hood and thumb-hole fitted wrist extensions. I'll be covering this in detail some time soon. It held the sleet off really well, although the cuffs and the wrist extensions got pretty sodden. They could do with a dose of waterproofing spray as well, I think.

As far as outer layers went, it was a spot on combination for what I was expecting, although had I wanted to stay even dryer, I should have packed my Hazard4 Poncho Villa but I erred on the side of less gear. I should have left out my spare 90's era snow-pants I got when we moved to Calgary, but I'll pack it next time.

For head and hands, I wore my Peruvian fleece caps, along with one or two Headsox to keep my neck, mouth and ears warm. I wore my dual layer, long wristed Condor Nomex gloves which I also gave a liberal waterproofing. That can of spray was an excellent addition and I can't recommend them enough. I think I shall trial a few different ones soon.

I wore a skiing helmet, to which I mounted my Contour Cam in its waterproof case. I gave the misty fogging Arena Flakjack goggles, with a smoky lens fitted, which remained mostly useable when I was skiing, but I needed to keep taking them off and wiping them off. The goggles really helped me have a clear and wind-free view of where I was going at upwards of 40kph downhill, who knew? I didn't hit ANYTHING this time. (I killed two aspen saplings at least, when living in Calgary).

I wore my Platatac Bravo hydration pack, with a 3L Source WXP bladder in it. I have a Blackhawk Side Plate carrier mounted to the bottom of my Bravo, as its hook-and-loop top makes it an excellent flat-pack pocket.

All in all, I was really pleased with my loadout, but most of all, I can't go without saying that my favourite bit of cold-weather kit was the SORD StormTrooper belt-fitted muff. Not only did it's pockets keep my needfuls (like my Manta emergency strobe, CLIF bars, and the like), they also were a place for me to stuff my gloves, and also just plain keep my hands warm. Warms hands mean good-times.

Review: Condor - Gen1 Battle Belt

This is my third Condor review.  I covered their Modular Plate Carrier recently, and had some good things to say about it, with a couple of caveats. My Condor Nomex gloves are still serving me well. Condor apparently gets a lot of stick in the high-speed gear community, but as a quite removed observer (damn you, Pacific Ocean), it's been hard to get a good picture as to why. I'm going to focus on what I see and feel myself. Both my Condor pieces are second hand, from a fellow who was getting rid of his excess collection.


This is the now superseded Gen1 Condor battle belt, which is still available out in the world, but Condor are promoting their newer Gen2 belt directly.

Adding to my growing collection of MultiCam, this 1000d Cordura belt functions in the way that must battle belts do, it is a sleeve type affair, and requires an actual belt to be fed through it in order to attach and wear it. I have fed my Propper 720 Riggers Belt through it. Internally, the battle belt has a series of webbing loops to snag and hold a belt in place, and fits up to a 2" belt easily. These loops keep a belt in place both in the donning and doffing process, but also when wearing it, to keep it riding right. The two front panels have openings in the bottom side to run a drop-leg rig off the internally threaded belt.

Four D-rings are set into the top of the beltfor attaching a harness or braces to.

The inside of the belt was lined with a breathability improving mesh padding, with two bands of non-slip backing. It was very comfortable to wear when empty, sitting on top of the hips and conforming to the curves of the body nicely.

Front View

The belt is surrounded by two rows of heavy webbing, 6 channels on the two side panels and 8 channels on the back. When you load the belt up, some things happen. Even with a fairly light load of a Platatac Half-Med pack and a WUP container, the belt sags noticeably.

Side view

Back View

This sagging didn't really affect the comfort, or the fit of the belt, but does raise some questions about its stability under higher loads, when you don't want that extra weight flopping about when you are being physical.

I suspect this sag is due to the Rigger belt being suspended through the middle of the Battle Belt, rather than riding up at the top seam, but it seemed like a design flaw to me.

I wore the belt all through last Easter's Confest (2015) with the loadout as shown here, with a Nalgene bottle in the WUP, with my RhinoRopework Hornet and American Kami Super Colubris combo fed into the left-hand side belt opening. It was super effective, and I chopped wood, carrier Tactical Baby and ran around like a mad thing with no trouble keeping my wearables in place. I'd like to see how it compares to the Gen2 Battle Belt, but it stands up nicely against the Platatac Young Guns and Bongo Battle Belts.

Review: Condor - MPC Modular Plate Carrier

I added a new plate carrier to my collection earlier is year. I've loved my Platatac MAC for years, but it is getting dated. It's not like I even really NEED a plate carrier, personal ballistic body armour is a restricted item in Australia, requiring all kinds of licencing and legal requirements to own, (for civilians, at least) so it is a pretty specialty item.

That said, I fill my plate carrier's pouches with polyethylene plastic cutting boards.  This fills it put and gives it body and structure, (for costuming purposes), but also serves as blunt-trauma and edged weapon armour. Ballistic armour is restricted in Australia, so even if I wanted to fill it with proper plates or soft-armour inserts, I couldn't. I still like to put plates in however, any armour is better than no armour. I should do a test-video some time I guess.


The Condor Modular Plate Carrier is designed with heavy webbing on all sides for any PALS/MOLLE compatible gear and accessories.

The MPC also features an integral cummerbund and padded shoulders support and comfort. If you are in a country that allows it, or just want to know the vitals,  the accepts up to 25x33cm (10" x 13") plate and "Large" SPEAR/BALC cut soft armour front and back. It comes with padded foam liners taking the place of the soft armour.

One of the first things I liked about this carrier, was that once I fitted it with my mock-plates, I found it stood up all on its own, brilliant for storage and airing after a sweaty day out adventuring. A couple of bands of loop-field on the back give you attachment options, and also tie down what appear to be drag-strap retainers. These seemed superfluous, but I guess some folks want to be as snag-free as possible. Twin metal D-rings on the shoulders give hydration and cabling tie-down options. 7 channel x 8 row PALS/MOLLE on the black offer plenty of pouch, pack or accessory options.

The built in cummerbund system wraps from back to front, and I found that that really added to the overall comfort and stability of the rig. You can see from this shot that the back-piece also maintains the shoulder-straps, with feed over and across the body, to affix via hook-and-loop to the front piece, before being held secure by Fastex style buckles and sewn-in webbing.

You can also see the but in mesh inner-liner on the back panel, this helps add a little bit of a breathing gap, but in all honesty, I can't say that I noticed much difference from front to back.

You can also see the two M4 magazine pouches built into to the cummerbund  here, with the webbing looped shock-cord retention cords that are on both sides. I was a bit disappointed with these, as only the front set appeared to be big enough to actually fit a magazine. I didn't find much else I could store in these, except perhaps some emergency SERE gear like a spare compass or fire-starters.The 6x4 PALS/MOLLE loops give ample attachment for external pouches.

 You can see from this internal view, the cummerbund is actually two parts, an elasticized belt with hook-and-loop inside and out, that holds the back piece snugly in place. This waist band in turn helps hold the front piece in place, via hook-and-loop, to let you fir the side panels firmly.

 A nice extra feature of the elastic waistband component is that there is a zippered pocket fitted inside it. Good for personal keep-sakes, or small sensitive items, this is the kind of thing I'd normally see on a travelers belt, rather than inside a military style plate carrier, but hey, just because your loaded out for battle doesn't mean you aren't immune to pickpockets, does it?

The ealastic waistband helped keep the weight of the whole rig off my shoulders a little bit, and was a very nice addition to the setup, without compromising the fit of the side panels.

The side panels attached via broad hook-and-loop patches, before being held in place securely, as with the shoulder straps, by Fastex style buckles.

The front panel itself features a mighty  8 row, seven channel spread of PALS/MOLLE, to allow all manner of pouch and accessories to be fitted. It also has a very high on the throat, and low to the belly coverage, something that I like very much, being quite a long bodied creature myself.  This combination oflong construction, and broad carriage options makes this a really appealing carrier for me, and one of the reasons it has overtaken my Platatac MAC as my chest-rig of preference.

The front panel has two bands of loop-field along the top, straddling the top PALS/MOLLE row. Along with the the shoulder strapping webbing, and the cummerbund webbing there are a couple of extra things about the front panel.

It features two broad hook-field patches, for the cummerbund to lock onto,  these suffer the difficulty all big patches of hook-field do, they are crud-magnets. I found that the wrap-forwards and buckle tight option was pretty good, and gave good coverage as well as leaving me room to breathe (never good to be in too-tight armour, especially, when you have to shoulder a pack, climb up somewhere, or run).

One thing I found that it took a little bit of doing to get the side flaps to sit right, and flush. Each side has a grab-loop, to assist in bringing it into place, but some incremental adjustment may be required to get it sitting right.

Donning and doffing the MPC was pretty easy. It was simply a matter of undoing the side panels both in buckle and hook-and-loop, and throwing the whole lot over my head, and doing up the elastic belt component.

Then it is just a matter of fixing the front piece to the belt gently, and strapping down the side panels.

The plate pockets are secured by internal hook-and-loop closing flaps at the bottom of the front and back panels, and the side plates are fitted through the back plate slots. This took a little fiddling to get the side plates into place but they seemed to stay once fitted. It would be interesting to see if they sat as well with steel plates.

Again, the hook-and-loop attachment of the side plates, even with the Fastex-buckles were probably my least favorite part of this carrier, as they took some fiddling to get to sit right, and to fully lay flat. I can see them coming open at inopportune times when you're trying to be quiet with that "sckreeeet" sound if they got hung up on something. That said, I spent some good time running about in it, weaving through the bush, and in some urbanised areas, whilst at the After The Fall: New Hill City event.

I got this second hand, and it was in good shape when I got it, and has held up to the pretty mild punishment I have given it, (including two weeks spread out in the cooken-yard, as torture testing) so I'm pretty happy with how its turned out.

I'm slowly getting with the times as far as camo-patterns go, and am slowly building to my MultiCam collection, this was a great piece to do so. The webbing is still khaki, so it's still a blend, but I'm getting here. 

Review: Condor Combat - Nomex gloves

I've been trolling eBay to find new exciting things to add to my collection, and one such bargain arose in the form of these Condor Combat Nomex & Leather gloves. I tend to destroy or lose gloves, so having another set on hand (huyk huyk) is a very good idea, as Winter is Coming here in Melbourne.

I've covered some rugged gloves in the past, but those are pretty much dedicated work gloves. I have long thin hands, and when it come to outdoors gloves, getting a good fit is difficult sometimes. The span of my hand tends to tear out the thumb/forefinger seam, so having a well put together glove that fits is also something I'm always looking for.

Constructed from the fire-resistant NOMEX fabric with premium goat leather highlights and reinforcement sections, one of the really interesting features is the dual-layer construction. The long sleeve of the inner layer rides up to about the mid forearm, meaning that it will tuck under a jacket, or over a shirt, giving a full "no-exposed-skin" cover. Is is great n the cold and wet, but essential when exposed to fire: be it flash, sustained or whatever. The outer hand-sized layer is stitched tot he inner, and features fully leather lined palms, and a elastic hook-and-loop closing wrist cuff. The knuckles, finger tips and trigger-finger digit knuckle are also leather reinforced.

I used them whilst chopping and hauling a load of firewood, and then later on when tending the bonfire and spitroast I did over the weekend. Not only did the long sleeve give me abrasion protection, and keep both my hands and wrists burn-free, the leather highlights also include a large padded section on the heel of the palm. This perfectly matches with padding needed when using a repetitive percussive tool.....

For me, that is mostly wood chopping with an axe, hammering or sword-work doing scrub clearing. For others, perhaps slinging hot lead.

These are a really nice set of gloves. They seem warm, without being hot, they have good coverage, solid construction and fit really well. I look forwards to waring these for all my outdoors cooking, chopping and strolling.