Review: Pace lid

Here's an item that I had covered as a wish-lust item back in January when I backed the Kickstarter for the PACE lid.

PACE stands for Primary, Alternate, Contingency, Emergency. It is a cache that replaces the lid of a wide-mouthed bottle such as a Nalgene. I've got several, both Nalgene and Kathmandu and the idea of them doing double duty was just too good. 

When planning for events in life you have to expect that unforeseen things may happen and knowing this and being able to prepare is empowering. Also, keeping your gear handy and secure is a good thing.

The PACE lid container has a capacity of 300mL (10oz), it's deep enough for an ID or credit card as well as a variety of other gear, with a recessed lip to fit a bent ID or credit card. 

The container is 7.6cm (3") in diameter and 5.7cm (2.25") inches deep. There's a small recessed lip around the perimeter that can secure items vertically and in place if they are bent, like cards, matches, other gear items.


I found that I could load at least 8m of paracord, along with my favorite gear tie, the Fishbone Piranha.


I found that I could stash a variety of items, from a roll of tape, keys, pocket-tools and a watch, as well as my ID. The idea I had was that I would have a waterproof and unobtrusive cache that I could leave on the beach, or toss into a daypack. 


The one downside is, that it is a pretty bulky addition to a Nalgene. 
 

You can see that it adds a fair length to the bottle, and that won't go un-noticed. Something to bear in mind.


The seal on the Nalgene bottle was solid, and the threading was well machined, so I didn't have any problems with leaks. 

One thing that occurred to me that I could store in it was a powdered sports drink, so I could keep my electrolytes up on the trot, my thought was that I could fill it up the 10oz capacity, enough to make several liters.
 
To give you another idea of how much capacity the PACE lid offers, I filled it with 70 Mentos. You could of course fill it with your own snacks or confection of choice, enough fishing line, lures and hooks to have a fishing trip set and ready to go. 

Survival Kit:The folks behind the PACE lids also offer a fully kitted out survival option, developed to fit specifically into a PACE lid.

Their kit includes:

(1) Adventurer Button Compass (NATO/U.S. Military Issue)
(10) All Weather Survival Matches (NATO/U.S. Military Issue)
(1) Derma Safe Razor Knife (U.S. Military Approved)
(1) Sewing Kit w/6 Safety Pins (Assembled in USA)
(6) MP1 Water Purification Tablets (U.S. Military Issue)
(1) Adventurer Survival Whistle (SOLAS/NATO Approved)
(1) Mini Survival Fishing Kit (Assembled in USA)
(1) Type 1A Utility Cord (U.S. Military Approved)
(1) Brass Snare Wire (Trapping and Equipment Repair)
(1) Emergency Signal Mirror (Daytime Emergency Signaling)
(1) Compact Flint Fire Starter w/Striker
(6) Adventurer Tinder Quik Fire Tabs
(1) Adventurer Fresnel Lens Fire Starter
(1) Water Bag 

(1) Compact First Aid Kit
--Sting Relief (2 packets)
--Butterfly Bandages (2)
--Band Aids (6)
--Moleskin (3" x 4")
--Triple Antibiotic Ointment (2)
--Zip Lock Bag
(2 packets) Hand Sanitizer
(2) Deet Bug Repellent Wipes 

(1) Silica Gel Desiccant (Moisture Absorbent)

The PACElid adds storage capacity to a wide mouth water bottles, compatible with Nalgene, Klean Kanteen, Kathmandu and Hydroflask bottles. I'm going to keep trying out new loads to carry around with me.

Review: VSSL Outdoor Utility cache

First seen on Breach Bang & Clear

I had missed the release of this particular product when it ran through its Kickstarter campaign, mostly for financial reasons, but my dear friend and Kickstarter aficionado Gareth Hodges had one and wanted to pass it on, so I snapped it up at a generous discount (thanks man!), so I have had one in my hot little hands, and pack for a while now.


This is the "utility" model of the VSSL which is to say, one of five models they offer, and this one is filled with s variety of useful and needful survival items.
The main body of the canister is a machined aluminium tube, with end caps that screw in to give a gasketed airtight seal. Each VSSL unit is 23cm (9") long by 5cm (2") diameter made from seamless extruded mil-spec anodized aluminium, and this model weighs 510g (18 oz). 

The unit is very sturdy, the two end caps are knurled, and the body has engraved details on it, as well as some knurling as well, giving a solid grip to open either end.


The real utility of the unit however is in its contents. As well as the two end caps, one of which has a dual mode (static high/low and SOS) LED ‘flood’ beam lantern light, illuminates a large area ( which runs on 3x N type or Energizer E90 batteries), and the tail cap holds a 4 hour burning pure Canadian beeswax candle and has an oil filled compass on its surface.

The seven little aluminium pill-boxes each with a small collection of survival needfulls, some in pairs, others singly. 


The contents are thus:

Razor blade

6 Aquatabs® water purification tablets

Wire saw (high tensile, 60lb working strength with handle straps)

Aluminium beadless emergency whistle

Waterproof matches

Tinder Quik® fire starters

Fishing Gear

Signalling Mirror

Marine grade rope (250lb breaking strength)

Reflective trail markers

P38 military GI Type can opener

First aid supplies 

VSSL priorities of survival and instructions

There's a good spread of items, and here they are itemized:The pill-boxes aren't hermetically sealed, but they don't really need to be, as they all live in the VSSL tube. The contents aren't meant to be for long term sustainment, rather to help out in the event of a short term emergency, or even to fill a gap in your EDC when out adventuring. It's solid construction and precision machining makes it a very well put together survival cache. 

The weight is a bit of a concern considering the overall size and scope of the contents, however, they are well packaged, so would be safe and ready to use when you need it, whether it's been sitting in your pack, in the back of your car or buried in your safe-drop spot. 

VSSL also produce several other versions of the flask: a Fist-Aid canister (full of boo-boo repair items), a Shelter canister (with a tarp, line and the like), an empty canister (build your own), a Flask (300mL of capacity and two collapsing shot cups) and their Zombie Spike version (for brain stabby goodness). 

Review: Ti2 - SentinelX

This beauty came to me as a Kickstarter (my initial pledge rewards got lost in the mail)just recently, and I've been thriiled to put it to some initial use.

From the makers of the Ti2-PB9 parabiner pulley and the Ti2 Sentinel S4S cache comes the the Sentinel X Cache. You may recall I wrote a wish-lust piece on it, a while ago, and am very pleased to finally have them in my hand.

Unlike the pocket sized Ti2 S4S cache, this is a large format, hard anodized aluminum cache.  It's internal dimensions are 51mm diameter x 153mm length (2" and 6"). Their  external dimensions 63mm x 204mm (2.5" and 8"). So around the size of a can of Coke around, and about the length of one, in the middle section. Empty, it weighs 400 g as it is made from aircraft grade 6061-T6 aluminium which has been strength optimized using "CAD parasolid modeling" giving it its unique ribbed / skeletonized design.

The tube is threaded at either end so you can access contents from either end, change out the end cap options, clean and empty it. The threads have a modified stub acme shape which is to say a trapezoidal cut, with twin Higbee blunt starts, so you don't get any cross-threading and better chances of a first-time screw.

Twin o-rings (white teflon rings shown here, orange food-grade silicone rings seen on the main project page) give redundancy and water-tightness. Both types of o-rings  are food grade  and able to withstand temperatures required to boil water. The teflon doesn't need greasing, which is an advantage in my books.

I really liked that the bottom cap has vent holes giving it a built in trivet  for boiling water or cooking in. I did a rough boil test, using an enamel camping mug, and the SentinelX was just a little quicker to boil. It also retained a lot of residual heat, with its thick walls, but its also worth noting that the entire container heated up. Even only lightly screwed on, the lid conducted enough heat to be barely touchable by the time the water boiled. I needed to use a wooden spoon to carry it off the flames.

The container holds 325 mL (11 fl oz), which is in keeping with its "less than a can f Coke dimensions, but to give you an idea of how much stuff you can store in it, I took this photo, of a fist-full of pens and pencils (23, but some mis-matched sizes).

I got one of each of the Type 3 Class 1 anodized coating. One in "regular" and one in the slicker looking "satin" finish.  This hard anodizing is typically used for military applications, but also on pots and frying pans offering excellent flame resistance. It's food grade finish was what I was most looking for, as  I wanted to be able to store and carry foodstuffs in it safely.

They also offer  Type 3, Class 2 anodized, NON food grade and available in black, olive drab and brown satin finish only.  Both Class 1 and Class 2 exhibit the same durability properties, so I wasn't trading off durability for food safety. Well worth it in my mind.

I haven't yet worked out what I will store in mine, long term, but I have carried it around in my Propper MultiPurpose Bag for some time now, with snacks and edibles.

I wanted to try making a up of tea with the hot water I had boiled, and found that it made a very passable brew, though the conducted heat I talked about earlier made it difficult to enjoy the drink, without wrapping in a towel first.

Those top lanyard holes make an excellent lanyard loop, for securing the cache, perhaps in a out-of-sight location, or perhaps as a hook point for when it is too hot to hold.

I am really pleased to have these in my collection, although as  I mentioned earlier, I still haven't decided what to fill mine with. I have been considering what item's from my Bug-Out-Jars would fit nicely, a line of thought that one of the beta-testers of the SentinelX shared.

As well as in my new bag, it's worth noting that the SentinelX also fits nicely into my Platatac FUP and would most likely fit into most double-mag pouches, like the Platatac 60Rnd or similar pouches.

This is a really cool product, and I certainly appreciate the modular and rugged performance that it offers. I'm looking forwards to keeping these on hand, filled with my needfuls.

Sneak Peek: Ti2 - Sentinel X containers

Just arrived in the mail, following shipping misadventures... I'm really excited about these ... Stay tuned!

Review: Ti2 Sentinel S4S cache

Following on from my brief review of the Ti2 SentinelX macro-cache  the maker, Mike Bond was kind enough to send me an example of his previous project, the Titanium Ti2 Sentinel "S" series.

This cache (seen here on a ring along side my other keychain toys the Jil Lite Constel LED microlight and my Cybernetic Research Labs Tactical Whistle.) is made from grade 2 titanium, purported to as strong as steel at half the weight, I must say, I am enjoying the booming Ti gadget boom that we are in.


This piece measures 0.5" x 2.75" externally, and has internal dimensions of 0.37" x 1"
The best part of the design is that it will open from both ends, a philosophy that Mike has passed on to his Sentinel X project as well. This means you can access the contents of your cache from either end, or clear a blockage.

As well as the water tight o-ring seal design. The threading is a custom square design, resistant to cross-threading, less susceptible to damage from dropping and turns eight turns to open into three turns, through its efficient mechanism.

There are fluted, ergonomic grip areas on both the end and tail caps, and the end cap has a large ring slot which can host a wide range of rings, clips, and lanyards.

The titanium has been stonewashed, it is corrosion resistant, sleek and satin finished, these are some very well machined caches. You should check the range here...

I found that the S4S was very small, too short for a needle and thread but perhaps it would work well as a pill fob, a stash for contact info. The longer and wider models would easily accommodate a lot more, but for me, I have filled mine with a very fine product from Black Phoenix Alchemy Lab's, for when I need to mask my natural scents ...