Reblogging: Improvised Tanks for Tank Week

Here's a piece I wrote for Breach Bang & Clear

“Every normal man must be tempted, at times, to spit on his hands, hoist the black flag, and begin slitting throats.” ― H.L. Mencken, Prejudices: First Series

... and at times you want more than just a mean look and the occasional sandbag to be between you and harms way. Sometimes you want to call on the thunder of armour. However, you might not have the power of the military-industrial complex behind you. You might only have the local scrapyard, oxy-torches, sheet metal, and an innovative spirit.

Currently the world's undersupplied warfighters are inventing all kinds of home-brew armour options, and we've been lucky enough to catch a glimpse of them over the last few years. And I must say, we're lucky to have only been catching glimpses and not rolling into battle in them. Let's check a few out.

 

This is the SHAM II, a proudly "100 percent made in Syria" improvised armored vehicle. Put together by Syrian rebels of the Al-Ansar brigade, in Bishqatin, four kms west of Aleppo, it came to the world's attention on December 8, 2012.

Built on an old car chassis and covered in 25mm thick steel walls, it was reportedly able to resist up to 23mm cannon fire. At only 2m wide and 4m long, this is no Abrams. It is, however, fitted with a remote-operated (by a hotwired Playstation remote of all things) 7.62mm machine gun on top. It also has five cameras that give the humans inside a view from all angles.

In one of the original interviews, its primary operator said ‘This is my brother, a trained engineer, who got the idea, we got a car, left its diesel motor on the chassis and built the engine. Not including from the gun, the vehicle costs about £6,200($10,000)." This gives you an understanding of what these folks are doing with their spare time.

Read the rest here at Breach Bang & Clear:

Wish-Lust Review: Defence Systems Australia cut resistant clothes

My favourite vendor at the Australian Security Expo was Defence Systems Australia, which probably comes as no surprise.

Defence Systems Australia (DSA) is an importer and retailer of innovative law enforcement and security products from around the world, specifically catering to the law enforcement officer. Rather than the usual tactical type gear that I have come to love, they cover some of the less glamourous end of it all, mostly suspect and prisoner related items, to protect the officers from things like stabbings, biting and less savoury attacks like spitting and the like. That might sound a bit off-topic for a blog lke this untill you consider the old stand-bys of zombies, plagues and civil unrest. Having a less tactical layer that offers significant protection is well worth looking into, which is why DSA caught my eye.

The DSA supplies the personal safety products specifically catered to the Law Enforcement Agencies, Security, Military and State and Federal Government Agencies.

They offer a range of slash and stab resistant clothes, covering a range of sensitive and at-risk areas, such as:

•Our throat, which harbours the carotid artery is certainly among the most at risk locations of our body. A cut through the carotid artery would most likely result in death. Our slash resistant turtle neck jacket or sweatshirt would protect this area.

•The radial artery can be found in our wrists, which often is subject to cuts during self defense or whilst protecting our face.
•The femoral artery is a general term comprising a few large arteries in the thigh. Cutting of the femoral artery would lead to a massive loss of blood within e very short period of time.
•The axillary artery is a large blood vessel to be found under your arm pits.

These clothes are built to the following standards, which meet or exceed ISO, ASTM and EN ratings for cut, and tear resistance:

ISO 13997:1999 Blade Cut Resistance Level 5 22Newtons: Cut Tex® PRO +27.8 Newtons
ASTM F-1790 Blade Cut Resistance Levels 4 1500-3499 grams force: Cut Tex® PRO 2580 grams force
EN 388:2003 Tear Resistance Level4 70+Newtons: Cut Tex® PRO 398.5 Newtons

DSA also offer a range of bite-rated protective overclothes, such as bracer-sleeves and a very clever over-the-shoulder set of sleeves. Well worth a look in if you are faced with, or can expect to be faced with biting hazards.

I'd be very keen to get a set of stab and slash resistant clothes, primarily because I often do some foolish things with long bladed shiny tools, like the Cold Steel Gladius, my very much beloved Zombie-Tools Deuce sword and the extremely useful and effective Boker Tomahook. Anyone who works with and swings big blades, or even small ones, knows there is aways a risk of cutting yourself from a bounce-back.

Those who work in offensive, dangerous environments like prisons, crowd control or event security would do well to have a layer of protection that they can wear as everyday clothing and protect their vitals, whilst still being able to go about their normal duties.

Check Defence Systems Australia out if you are in the market for bladed penetration protection.

They also have a range of body cameras to check out ...

Wish Lust: Devtac Ronin mask

I saw some really cool masks in my thread and I got in touch with the owners, and got the low down on their line.

DEVTAC co. inc. Japan started in 2010 and was a subsidiary of R&D Trading and consulting company. Devtac stands for developing tactics specialized in Business consulting and strategies. They have recently expanded their business to industrial designing concepts and manufacturing.
Their location is in Japan, Shizuoka ken Hamamatsu Shi Enshuhama Kenei jutaku 3 chome 2-22-204 if you wanted to visit a storefront, but otherwise they can only be reached online.

Their masks are not commercially made, but rather are individually crafted.  That have some very special capabilities. These are carefully handcrafted pieces customized to fit your needs.

Firstly, the masks are only ordered directly from them through Facebook, Youtube or email.

The main frame of the masks are fiberglass, with hardpoints for adding both bolt-on armour, and accessories. For those in need of Prescription glasses you can order one here. The offer several different versions, starting with the kevlar lined versions:

DEVTAC KEVLAR LEVEL 2A

Kevlar set is $1350USD ballistics tested up to level 2a(unofficial).

DEVTAC BALLISTICS KEVLAR PLATES MATERIAL TEST

DEVTAC TESTS 1 Super 38 1400fps 100gr NIJ Level 3a rating, 9mm on mp5 1200fps and 45acp 980fps

DEVTAC KEVLAR LEVEL 3A 

$1480USD Ronin mask Kevlar level 3a with 7mm plates. The Kevlar back plate to make a wrap-around helmet is $485USD and separately sold. 

DEVTAC RONIN KEVLAR LEVEL 3A TACTICAL BALLISTIC HELMET! BULLET PROOF

The main mask has an ultralight nylon fiber mesh that is reinforced with special resin and is very flexible, it can withstand strong impacts. The open cheeks are designed for easier aiming with scope or iron sights without putting undue strain on your neck. The cheek has 3 built in neodymium N52 magnets on each corner on both sides so it is absolutely hassle free when you want to put on or remove the cheek plates as quickly as possible.

DevTac masks come in the following sizes:

regular long- men 180-195cm tall 95 kg in weight

Regular short - men 158-175cm tall , 60-80kg in weight

Wide long- men 180-200cm tall 90-220kg 

Wide short- men 158-179cm 90kg-220kg

All the lens frames are ventilated by built in AA battery driven micro fan and a speed dial down by the cheek, and by some very clever design to both vent, and circulate air, they offer fog-free vision, with around a 120 degree arc of vision. The polycarbonate lenses fit into a removable frame and can be popped out to replace scratched or damaged units.

A cover is available for paintball users to stop paint getting blown into the mask from eye-hits.

For those of you who don't tend to face ballistic threats,  DEVTAC RONIN MASK(fiberglass) with  7mm fiberglass plates are $ 480USD comes with 2 pairs of lens, clear and amber or your choice. Without the plates is $350USD. including everything. 

BACK HELMET with extender and plates is $195USD and $145USD without  plates, (as an add on), as with the kevlar version, this offers fully-wrapping head cover, and an enclosed shell, held in place with straps and magnets.

Additional options are things like a built in NVG PLATE with shroud: ($75USD-Fiberglass $135USD-kevlar) and even a MOHAWK helmet decoration for $69USD.

N50 Neodymium magnets spaced around the back of the mask, and the front of the back plate to hold it in place. Each magnet has a 1.2kg pulling capacity, so are very sturdy. The cheek plates are also held in place by magnets, allowing the user to remove them in the field to give you a cheek-weld to a rifle stock or to improve venting. The crown, mouth and ear plates are bolted on, for stability, but have venting ports, with heavy mesh below that, to give venting access for when you need.

All parts are replaceable. The mask has 1 year warranty on electronics and 2 years on the frames.

Paint options depend on the availability of the paint for DecTac at the time. They also offer water transfer prints with Multicam and ATACS now available for $80USD per frame.


DevTac aims to provide Airsoft and Paintball PPE but their venture into kevlar lining might well make them a player in designing armour or use in more dangerous fields.

They offer the Ronin helmets in a variety of colours, with the flexible polymer base and nylon mesh inner, the plates and eye lenses, along with all the straps you need for a front-facing mask, or the magnet attaching options for the back-plate if you choose to go that route. One thing you'll need to keep in mind is that manufacturing is only done every 3-4 months or so, and slots are limited so DevTac ask that interested people make a reservation.

Payments are through wire transfer, and Western Union and pre-order needs a down payment of $200USD for airsoft version and $500USD for ballistic version. Shipping is 45.00$USD (kevlar version is 65$USD) Japan Post, EMS or SAL worldwide flat rate. Extra pair of lenses are $27USD.

--------------------------------

SAMURAI MENPO MASK 

Basic price is $115USD it includes magnets and garter straps and triglides with no metal bolts.

$145USD will include the metal bolts and holders and leather straps. 2 years warranty.

Shipping is $35USD, and is sent via EMS Japan Post and takes 4-7days

They ask for a downpayment of 50$USD for the menpo.

The DevTac masks are most excellent to look at, and if the field-footage is to be believed, they do the trick. I'd love to get my hands on one, for shear bad-assery, let alone armoring my head.

Wish Lust: Total Comfort Medical kneepads

I got an email from Joe Johnson, President and CEO of Total Comfort Medical got in touch with me. Joe had worked with Stephen Walden of Bosse Tools and remembered the Wish-lust article I did on the Ergonomic Shovel that Bosse Tools (I didn't happen to back that one, mostly due to the hefty shipping rates to Australia from the rest of the world) and wanted to get my opinion on his new product design.

TCM has developed a flexible kneepad, for use gardening, at work or at other activity you might be putting your knees through some hefty activity. 
I wear kneepads when ever I am adventuring, such as Tough Mudders or laser-tag events and mostly wear my now battered Blackhawk! kneepads, so it would be excellent to have another option, perhaps even a less-high-impact version, to better blend in or go unnoticed.

 
 The TCM pads are constructed with one inch thick foam core composed of two different layers. The top layer of padding is a real memory foam that contours around the knee of a user. It provides a soft point of contact that absorbs the initial pressure of your knee. The bottom layer of padding is an energy dispersing foam. This layer provides a sustained level of support.
The outer layer of the pad is a wicking fabric that is water resistant, oil resistant, and chemical resistant, meaning you’ll always stay dry and protected.

The knee pads are durable and weather resistant, you can use them inside or take them outside wherever your work requires. They have a hook-and-loop strip closure system, but have a wrap-around ergonomically designed curved strap that has been planned to prevent any pinching or binding behind your leg.

This has long been the bane of knee pads in my experience, and I have had some bad times going for long runs with pads on, so I look forwards to putting this design through its paces too.


Stay on the look out for these kneepads from TCM, I'll let you all know when they are available, and I've had a chance to put them through their paces.

Review: Condor - MPC Modular Plate Carrier

I added a new plate carrier to my collection earlier is year. I've loved my Platatac MAC for years, but it is getting dated. It's not like I even really NEED a plate carrier, personal ballistic body armour is a restricted item in Australia, requiring all kinds of licencing and legal requirements to own, (for civilians, at least) so it is a pretty specialty item.

That said, I fill my plate carrier's pouches with polyethylene plastic cutting boards.  This fills it put and gives it body and structure, (for costuming purposes), but also serves as blunt-trauma and edged weapon armour. Ballistic armour is restricted in Australia, so even if I wanted to fill it with proper plates or soft-armour inserts, I couldn't. I still like to put plates in however, any armour is better than no armour. I should do a test-video some time I guess.


The Condor Modular Plate Carrier is designed with heavy webbing on all sides for any PALS/MOLLE compatible gear and accessories.

The MPC also features an integral cummerbund and padded shoulders support and comfort. If you are in a country that allows it, or just want to know the vitals,  the accepts up to 25x33cm (10" x 13") plate and "Large" SPEAR/BALC cut soft armour front and back. It comes with padded foam liners taking the place of the soft armour.

One of the first things I liked about this carrier, was that once I fitted it with my mock-plates, I found it stood up all on its own, brilliant for storage and airing after a sweaty day out adventuring. A couple of bands of loop-field on the back give you attachment options, and also tie down what appear to be drag-strap retainers. These seemed superfluous, but I guess some folks want to be as snag-free as possible. Twin metal D-rings on the shoulders give hydration and cabling tie-down options. 7 channel x 8 row PALS/MOLLE on the black offer plenty of pouch, pack or accessory options.

The built in cummerbund system wraps from back to front, and I found that that really added to the overall comfort and stability of the rig. You can see from this shot that the back-piece also maintains the shoulder-straps, with feed over and across the body, to affix via hook-and-loop to the front piece, before being held secure by Fastex style buckles and sewn-in webbing.

You can also see the but in mesh inner-liner on the back panel, this helps add a little bit of a breathing gap, but in all honesty, I can't say that I noticed much difference from front to back.

You can also see the two M4 magazine pouches built into to the cummerbund  here, with the webbing looped shock-cord retention cords that are on both sides. I was a bit disappointed with these, as only the front set appeared to be big enough to actually fit a magazine. I didn't find much else I could store in these, except perhaps some emergency SERE gear like a spare compass or fire-starters.The 6x4 PALS/MOLLE loops give ample attachment for external pouches.

 You can see from this internal view, the cummerbund is actually two parts, an elasticized belt with hook-and-loop inside and out, that holds the back piece snugly in place. This waist band in turn helps hold the front piece in place, via hook-and-loop, to let you fir the side panels firmly.

 A nice extra feature of the elastic waistband component is that there is a zippered pocket fitted inside it. Good for personal keep-sakes, or small sensitive items, this is the kind of thing I'd normally see on a travelers belt, rather than inside a military style plate carrier, but hey, just because your loaded out for battle doesn't mean you aren't immune to pickpockets, does it?

The ealastic waistband helped keep the weight of the whole rig off my shoulders a little bit, and was a very nice addition to the setup, without compromising the fit of the side panels.

The side panels attached via broad hook-and-loop patches, before being held in place securely, as with the shoulder straps, by Fastex style buckles.

The front panel itself features a mighty  8 row, seven channel spread of PALS/MOLLE, to allow all manner of pouch and accessories to be fitted. It also has a very high on the throat, and low to the belly coverage, something that I like very much, being quite a long bodied creature myself.  This combination oflong construction, and broad carriage options makes this a really appealing carrier for me, and one of the reasons it has overtaken my Platatac MAC as my chest-rig of preference.

The front panel has two bands of loop-field along the top, straddling the top PALS/MOLLE row. Along with the the shoulder strapping webbing, and the cummerbund webbing there are a couple of extra things about the front panel.

It features two broad hook-field patches, for the cummerbund to lock onto,  these suffer the difficulty all big patches of hook-field do, they are crud-magnets. I found that the wrap-forwards and buckle tight option was pretty good, and gave good coverage as well as leaving me room to breathe (never good to be in too-tight armour, especially, when you have to shoulder a pack, climb up somewhere, or run).

One thing I found that it took a little bit of doing to get the side flaps to sit right, and flush. Each side has a grab-loop, to assist in bringing it into place, but some incremental adjustment may be required to get it sitting right.

Donning and doffing the MPC was pretty easy. It was simply a matter of undoing the side panels both in buckle and hook-and-loop, and throwing the whole lot over my head, and doing up the elastic belt component.

Then it is just a matter of fixing the front piece to the belt gently, and strapping down the side panels.

The plate pockets are secured by internal hook-and-loop closing flaps at the bottom of the front and back panels, and the side plates are fitted through the back plate slots. This took a little fiddling to get the side plates into place but they seemed to stay once fitted. It would be interesting to see if they sat as well with steel plates.

Again, the hook-and-loop attachment of the side plates, even with the Fastex-buckles were probably my least favorite part of this carrier, as they took some fiddling to get to sit right, and to fully lay flat. I can see them coming open at inopportune times when you're trying to be quiet with that "sckreeeet" sound if they got hung up on something. That said, I spent some good time running about in it, weaving through the bush, and in some urbanised areas, whilst at the After The Fall: New Hill City event.

I got this second hand, and it was in good shape when I got it, and has held up to the pretty mild punishment I have given it, (including two weeks spread out in the cooken-yard, as torture testing) so I'm pretty happy with how its turned out.

I'm slowly getting with the times as far as camo-patterns go, and am slowly building to my MultiCam collection, this was a great piece to do so. The webbing is still khaki, so it's still a blend, but I'm getting here. 

Review: SureFire - Sonic Defender EP4 EarPro

I've covered a bunch of PPE in the past: body armour, rain and weather wear, helmets, goggles and buoyancy gear. What I haven't really covered before is ear protection.

I have always worn earplugs when out at clubs and concerts, sporting events (RollerDerby all the way!) but also for power tool work and for industrial noise. Generally I have worn the squishy foam earbuds, but have resorted to rolled up cloth, wadded paper and even Blu-Tack in order to preserve my hearing in loud environments. Mostly nightclubs.
The problem with all these kind of earbuds is the loss of clarity. Or you go to over-head ear-muffs and lose even more.



When I saw the Sure Fire Sonic Defender EP4 on Platatac's website, I thought I'd take the plunge with something more professional.

These hypoallergenic, medical-grade polymer framed plugs fit into the contours and folds of the ear, in ways that are both comfortable AND secure. No more foam popping out, these suckers stay in place, regardless of how much I am enjoying the PWEI reunion concert I am at, or rattling myself with a hammer-drill fortifying "the bunker". The triple flange design incorporates a patented Hocks Noise Braker® filter, lowering potentially dangerous noise levels above 85dB by upwards of 24dB whilst the little stoppers are in place, but allow for near-normal range of hearing when out.

I also noted that the high and mid-range loss was quite different to that with regular foam plugs, there was much more clarity in human speech, without the sharp high-end sting that naked-earways might expect, around loud sources. Removable lanyard lets you pull them out have them draped around your neck, or gear and not drop them in the muck, should you need to.

The soft, durable, and long-lasting plugs were comfortable wearing for hours, and I was able to answer a call on my phone with no problems. Being a low-profile design that allows you to keep them in place while wearing a mask, helmet, hat, headphones, or supplemental ear muff means you can wear them without being caught with unprotected hearing for those unexpected noises in non permissive environments ....