Showing posts with label OD. Show all posts
Showing posts with label OD. Show all posts

Wednesday, December 30, 2015

Review: Propper - Range Bag


First seen on Breach Bang & Clear ....
Here's a follow up from my sneak-peek review of the Propper Range Bag. I took the Range Bag with me on an international trip to the jungle-covered mountains of Bali, Indonesia in mid October for a family event, rather than for a Tropic Thunder or Rambo4 themed get-away ... I wanted to maximise my gear-totage, as well as my carry-on capacity. The Range Bag was my upgrade to the very similar Propper Multipurpose Bag, which I had been using as my every-day bag and as carry-on for some time previously.

The Range Bag is in many respects an up-sized version of the Multipurpose Bag, with many of the same design aspects, such as the long-side opening panels, the double zippered opening top lid as well as it's carry handles and the like.

I decked out my bag with a variety of airport-safe goodies, and needfuls, and set out for international customs and far away vistas. I checked out the 48cm x34cm x 23cm size restrictions on Virgin Australia's international carry-on regulations, and had already confirmed it was good-to go.


Almost twice the width of their Multipurpose Bags, the Range Bag measures 25cm x 38cm x 23cm (10" x 15" x 9") and as I mentioned is a beefed up and expanded version of the MPB. Padded on all sides for increased protection and rigidity, it holds it shape even when empty. There are two stiffened internal dividers, fitted with flaps with hook-field ends to affix the dividers to the fine-finished loop-field covered internal walls of the bag.

These walls can be adjusted or discarded, as fits your use or mission, and the whole of the internal cavity is lined in hi-contrast orange, to help you find your OD tool in its OD sheath in your bottom of your OD bag. I fitted the "back" compartment of my carry-on with a 1L Nalgene bottle, a folded up First Strike Snatch-Bag ii for any extra incidental bagging I might be needing. In the center compartment I made, I had my novels and iPad for in-flight and hurry-up-and-wait times, I also included my Propper mesh-sided boo-boo kit, loaded up with all kinds of travel first-aid needs and spares. In the "front" compartment, I had the Propper 5x7 case, which held all our passports and travel documents, and my Snowgum iPhone case as a batter-backup for my phone.

The main compartment has a lockable zipper, good enough to keep little prying hands away from dangerous things.


On the "right-hand" side panel is fitted with a mesh pocket, and a fold-out mat to do your weapon maintenance or lay out a picnic. The Range Bag also comes with a removable hook-field backed accessory panel. I used that mesh panel to stow PPE gear like my Barz goggle sunglasses, earplugs, and other assorted goodies like Paracetamol and Ibuprofen. In the folds of the maintenance mat, I included wet-wipes, and a couple of nappies as well, for on-the-go emergencies, as well as acting as very effective blood-sponges. You know, in case of misadventures trying to get a taxi ...


The large end pocket, I filled with a super absorbent travel towel, two hospital grade sick-bags and my Multicam Headsox . My last international trip involved getting not one, but two lots of little-kid barf on me. Not this time matey! The internal material is also the high-visibility orange, but is off-set by the OD surface material, to make rummaging for items easy, without exposing yourself to unwanted attention by flashes of Blaze. The end pocket had a hook-and-loop patch for securing it, but stuffed full as it was, was not useable. However, the design of the bag kept it all snug and sound. I suspect you could keep a small to medium sized pistol in that pocket, without too much trouble.


The outward facing side panel is covered in a mixture of loop-filed at the top, and two rows of seven channel MOLLE, and inside has another mesh-lined pocket, along with six pistol magazine sized pouches. I stowed personal electronics cables and the like, as well as parkers, crayons (good for both occupying little people as well as waterproof communication and as both kindling and illumination purposes (they make pretty functional candles), as well as an asthma pump.  Again, the lockable double zippers allowed me to have a sense of security around both theft and also being reverse-pickpocketed with contraband materials. Indonesia has a death penalty for drug smuggling.

The front side panel is also fitted out with more MOLLE channels, but I didn't make any use of these. I can see any number of small pouches and carrier working well there though.

One thing I found was that it was very convenient to have the internal compartments, which allowed me to set very specific places for my load. Not misplacing travel documents, (or perhaps a backup pistol, if that's the way you pack)  is always a good thing. That said, the extra width of the Range Bag over the Multipurpose Bag meant that it wasn't as easy to rip back the top flap one handed, to get at the insides. the zippers were too fine, and pinched when I tried a few times. Slow and steady wins the race in this case.

It was also pretty comfortable to heft around, the internal padding not only kept my gear safe and secure, but also kept them from jabbing me in the hip and kidneys as I carried it all around.



I also liked that I could pull open the side panels to access the gear I had in there, on the fly, and that it acted as a mobile platform to work from.

Even with a pack on my back, the Range Bag on my hip was able to be swung around and rummaged through with no real problem, and its broad top even acted as an additional platform for carrying more things (or even little people as a bench-seat). The shoulder straps were both just wide enough to spread the load and not too big as to get in the way. The sliding shoulder padding I found was placed in an awkward place, due to the broad tri-glide adjuster, but I managed to feed it into the padding strap eventually. I didn't like the clip-attachment the shoulder strap had though. The broad Fastex buckle from the Multipurpose Bag would have been much better, and enable a one-handed quick-release, in the event I needed to drop and go. With the heavier load of the Range Bag, this would have been even more useful.



I made use of the fold-out mat a couple of times, mostly doing paperwork and the occasional fix-it session, the finish was good and gripping, and not tacky, which is a plus to my mind. I didn't loose and widgets, or little screws so I'll call it a useful addition.


The Range Bag ticked all the boxes for a carry-on bag, as well as a travel accessory. I don't like taking anything I can't carry or sling onto me. I like having my hands free for whatever might come my way, so the Range Bag was a logical step up for when I needed to carry a bit more, or if I needed to carry bulkier, heavier items than I might have otherwise done. Need to carry a bunch of lead to and from your favourite pew-pew place? I have no doubt that your personal needs would be met with this bag. Need to run up and down a hill? Get a ruck.

Sunday, December 8, 2013

Review: Strike Industries - SHOX iPhone 5 case


It's no great secret that I am a big phone freak. Since writing this blog, I've covered my iPhone 4S cases, namely the OPT silicone-armor case, a Maxpedition iPhone pouch, the feature rich Snow Llizard-SLXtreme "ruggedized" case, the hunter-friendly Griffin "mossy-oak" Survivor case as well as my most recent addition, the Strike Industries Battle-case (on top in this picture).

 When Strike industries sent me the 4S compatible Battle Case, they also kindly sent me their newest, 5/5S compatible case, the Battle Case Shox  and accessory pack!
 The most exciting part about the SHOX case, apart from having the same grippy, textured thermoplastic polyurethane material, is that the SHOX has built in shock absorbing springs built into the corners! Beveled lips hold the phone snugly in place, and keep the sides dust free.

The springs add a certain bulk to the corners of the phone, which I have found to be quite an exceptional addition, as it means that the speakers are off-set, and when held, are not blocked by the edge or heel of my palm. A built in sound reflector adds to that, without expanding the dimensions further. They also add a nub to grip on, increasing the retention capabilities of this case. Power and volume buttons are permanently protected, but accessible through the case.

The lines of those spring bumpers are combined with the finger loop, which as in the original Battle Case, provide a tremendous advantage for drawing the phone from a pocket or pouch, as well as retaining it in the hand, by carabiner or lanyard. Unlike the Original Battle Case, this loop is at the "top" rather than the "bottom" of the phone.

This case lacks the honeycomb macro-texture of the original, but instead features ridges, as well as bevels around an internal storage area, large enough to fit a couple of credit card sized objects.

These are accessible via a slot on the side, and visible through a window in the middle of the case. Both the window and the opening slot act as heat vents, I've found, especially useful when the phone is dash-mounted in my vehicle. The camera opening is wide enough to accommodate all the sensors and flash easily, reducing back-scatter considerably. 

Looking inside the case you can see that it has additional internal structure to add to the padding and protection that the semi-rigid polyurethane offers. I have also been using the clear plastic camera guard, which is included in the "plugs accessory set" and sits in an insert holder.  The other accessory plugs have been too much trouble for my day to day use, but for dust-proofing, look like would all serve their purpose ideally, except the sound-reflector cover, which I couldn't get to sit in the case correctly.

All in all, this is an excellent case, and my iPhone 5S is happily encased, protected and secure. I noted that several "third-party" Lightning plugs were too wide to fit, but a quick pass with the Dremel sorted that right out.


Also, for those that complained last time, Strike Industries now stock a Samsung S4 Active version and for the candy-coloured wolves out there, a iPhone 5C version as well.

Saturday, November 2, 2013

Review: 5.11 Tactical Kilts


I love it when I get my wish-lusts fulfilled,  but I am so glad when its not just me, but the hordes of fans who get theirs too ... From what was originally a "April's Fools" joke, back in 2011,  with a VERY limited run (less than 100, if accounts are to be believed), the uproar from fans led CEO of 5.11 Tactical, Mr Tom Davin to take the cries to heart, and a full production run was initiated.

These are the 5.11 Tacical TDU Kilts  in Tan, OD, Black and Multicam and managed to secure in a pre-order, from 5.11 Tactical Australia.

I've really enjoyed adding more kilts to my collection over the last few years, along with my collection of UtiliKilts and my formal tartan kilt, as well as others, they are an important part of my identity.

The question is just how apt are they for a survival situation? It all comes down to the "form and function" ratio.  I'll go into that in a bit, first, here's what makes up the 5.11 TDU kilt.

 Firstly, they are made to mirror the TDU pants as closely as possible, with pocket placement, (including the cargo pockets) for "consistency of training". I have several sets of 5.11 pants, the Stryke and the TacLite Pro pants and I can say that I like the consistency, even between different designs and cuts. 

The TDU kilt is made of the same 65% Polyester, 35% Teflon treated ripstop cotton as the TacLite Pro pants, with four snap-closures on each side of the front panel. Double and triple stitching throughout ensures rugged and reliable wear.

Brass D-loops for sporran attachment are awesome, and I have worn my CAOS Admin pouch as one, for full Tacti-cool Effect.

Always a welcome addition to a kilt, the front slant pockets featured reinforced edges to protect against knife, pen or light clip abrasion.

The front belt loop includes additional badge holder loops, the loops themselves are wide enough to accommodate up to a 1 3/4" belt. Ive had no trouble with any of my belts; but tend to go with either the made-to-match 5.11 TDU belts, my shiny PM Leather hobble belts, or the always dependable 215 Gear Ultimate Rigger belt.

The side cargo pockets are also press-snapped on, and removable, and swappable, with hook-and-loop closures. Inside each pocket, are either two or three internal pockets, to fit two 30 round AR magazines or three pistol magazines, the pockets can be switched from one side to the other to fit your need.  A gap has been left in the lid-flap to accommodate feeling items through, in this case, I have used my Benchmade SOCP CQB dagger-trainer to demonstrate .


An internal press-snap gives an additional modesty protector, as well and ensuing you get more cover for your activities. There has been a long military history of the kilt, formally ending during WW2, and the recent revival in "tactical-wear" is only a reflection of that, however, I have worn mine in some pretty arduous conditions, and can attest that they offer considerable freedom of movement, are not all that cold in inclement weather, and cooling in hot weather.

I have climbed, run, crawled and jumped in mine, as well as wearing them to work on a regular basis. Much like my collection of "cargo pants" these offer me a means to carry my EDC, some rugged daily-wear and have some individuality to boot. Thanks Mr Davin!

Saturday, October 5, 2013

Review: Peruvian Fleece Cap

So, I've made no bones about my disdain for winter, and am always on the look out for more cold-banishing gear to add to my collection. This winter I added some long Nomex gloves to couple with my Harry 1.2 softshell jacket. However, I wanted something to keep my head snug and toasty. When in Canada I often wore a tuque and when living in England I had a hunting cap with ear-flaps so when, I saw these come up on eBay, I got a set for myself, and one for Omega too (who is still acclimatizing to Melbourne from Brisbane, 5 years on)



This is apparently a "Peruvian Wool Fleece Cap" patterned after the traditional Chullo. Im pretty certain it isn't wool, so lets just say that it is fleece. The cap is topped by six triangular sections, much like most fabric hats, but is edged with an asymmetrical band that includes the "ear-flaps". A cord-locked drawstring is sewn in to assist with retention, and to keep the flaps tucked up to your chin in especially chilly conditions.

I tend to roll the ear flaps up and cinch the drawstring in a little, because I like to hear my surroundings more clearly,

However, when up at the snow, or in just a bitter wind, I am only too happy to protect me delicate flesh and roll them down. 

The snug fit lends itself to sitting under a hood, such as in my Harry 1.2 jacket, or even under a helmet, such as my Ops-Core knockoff bump helmet.

Thankfully there have been few days this season where I've felt like I've needed this cap, but I am vey glad to have it, packed and ready, for when I did. A great camping and wilderness survival addition. 

I'm thinking of doing Halloween as Angry Finland...

Side note, my mother had kept my ear-flap cap, I passed it on to Tactical Baby ... RLTW!




Friday, February 22, 2013

Review: Tactical Whistle



I really am a sucker for shiny Kickstarter projects, and this was no exception. A -tactical- whistle you ask? Well, the Cybernetic Research design engineers built a whistle that meets many aerospace and MIL-spec standards, and designed it to perform in all kinds of environments, conditions and do so well.

It features a "three flute" design which provides three specific "voices" which were designed to increase audible recognition over long distances, cut through the background noises caused by weather, rushing water, air and ground traffic, as well as other noises.

According to Cybernetic Research the primary central frequency is 3150 Hz which they cite government regulations as producing the most piercing sound over the widest range of detrimental conditions. The other two voices are designed to fill what they call the "overall acoustical profile at frequencies between the primary 3150 Hz output and its various harmonics both above and below the primary".

With no moving parts, no rattle, a stepped knurled surface for positive grip under poor conditions, and a really low-breath requirement for sounding it, this is a great little whistle. They offered it in anodised aluminium, stainless steel, brass and titanium. I opted for the OD green aluminium, which weighed in at 14.6 g, and sits all but unnoticeable in my pocket, waiting for a need to be heard. The split ring allows for lanyard or pack-attachment, and I think i'll be adding mine to my keychain.



Here is a video of my testing it, with my iPhone volume app, "Sound Level" , and as you can see, (and hear) it gives a 100+dB scream, and the clip doesn't give the ear-ringing multi-phasic tone justice.

Signalling with a whistle is one of the simplest, easiest and most recognizable means of survival communication, and I can't recommend them enough. This is a whistle that will certainly make an impression should I have the need, and I think I'll be able to depend on it to always be ready, no matter what.

Monday, October 29, 2012

Review: United Cutlery - M48 Ranger Hawk axe



Here is my first totally "tacticool" post in a while. I have shown you some axe-love in the past, and even debunked a cancelled product post and flirted with some serious and lustful objects but haven't really gotten up close and personal with the smaller choppers, till now!

This piece of bad-assed pointy is the
M48 Kommando Ranger Hawk Axe
from United Cutlery. I had seen this advertised on ThinkGeek, and loved the look of it, and for the price, was willing to grab one to mess with. ThinkGeek have changed their shipping conditions however and this as well as many other of their tool and cool items no longer ship to Australia. I don't know if this from their end or ours, but I was denied! I hate that. I managed to find alternate means of securing my item, via a well known ordering service named after a large South American river system. This too was not without issue, and following once cancellation, I managed to secure myself a chopper!

This head of this piece is "precision" cast 2Cr13 stainless steel, and features a wide bearded cutting edge, which sweeps downwards nicely, and has a very smooth geometry to its edge.The topside of the head has been beveled back and is not blackened like the rest of the head, which I thought was a little odd.. Three holes skeletonise the head, reducing the over all weight without making the piece flimsy feeling in the slightest. The back of the "beard" had a smooth finish and I felt I could grip it for precision whittling if it ever appealed to me. The whole piece weighs in at 1.088 kg (2.4lbs) and sitting at approximately 20cm (7 5/8") across the length of the head, and just under 40cm (15 1/2") "tall" This is a really light option for what it is.

There is apparently 90cm (36") a pole-axe version available as well, but it looks like it may be a different head too.



The flip side of the axe-head is this very impressive spiked beak, again with the edges being uncoated "false edges" in this case leading to a rather pointy, and well defined penetrating tip. the beak follows the same lines as the axe-beard, and sweeps downwards, aiding in transferring the energy of a swing. An interesting and well thought out feature seen clearly here is the notch cut into the underside of the beak, which fits the thumb-and-index finger top of your fist if you slide your hand right up the shaft to take a grip of just the head. This facilitates a really comfortable choked-up grip for fine chopping or perhaps cutting with the blade.
Traditionally,the back of a Tomahawk
seems to have primarily been a hammer type end, rather than a spike, which seems to have been more a common feature of the Warhammer. No less devastating when featured here though, I imagine.


The handle of this piece is nylon, reinforced with 30% fiberglass and features both a double sided "knuckle" for gripping and preventing you from accidentally sliding up the grip, as well as a series of deep groves running the circumference of the rounded handle.

A lanyard hole at the base fits paracord nicely, and in fact,  one of the options offered by United Cutlery is a cord-wrapped version (only on one colour of the handle as far as I can tell, the OD version). Speaking of which, there appear to be a number of colour options available for this, black, OD green, safety orange and rescue yellow. This is a really nice thought, allowing people to clearly indicate the tools function, or keep it subdued and inconspicuous for those people on two-way firing ranges who don't want to stand out.


The head of the axe is fitted to the haft with three TORX type screws, binding the tang to about 1/3 of the length of the haft. I was happy with the binding and security of this attachment, from the brief testing I gave this piece, but intend to do a whole lot more chopping with it shortly.

The sheath is probably the least satisfying piece of the package. Whilst the nylon and furniture was hefty and felt well put together, with rivets along the top and cutting edges, and press-studs to close the bottom of the sheath, for "pull-away" access, however, on the back of the sheath, the attachment options to mount the whole thing were pretty woeful on this model. A single narrow belt-loop was pretty limiting, and I think I will need to do some modifications before I can fit this into my current platforms and bug-out-bags. To be fair, the cord-wrapped / OD green option comes with a somewhat more accommodating sheath, with some PALS/MOLLE looking hook-and-loop tabs, but overall, this was a disappointing end to what was otherwise an outstanding looking and feeling little axe. . 

Perfect for that long trek in the bush, demounted search and rescue, breaching and increasingly for CQB if accounts are to be believed.   

VIDEO REVIEW HERE

M48 Kommando Ranger Hawk Axe
Click to go to Think Geek store listing ....
You may wonder, in this era, why would people be interested in a hand-axe, well here are some Hollywood-produced suggestions....

Making a lasting first impression.... Colonial era style

Up close and personal, Revolutionary War style.



Friday, July 13, 2012

Review: colours, cams and gear

A little while ago, I mentioned I might do a review of my variety of cams and colours. Here goes I suppose! I gathered my collection of kit and clothes, and made a pile, sorting out the different cam patterns and this is what I came up with. I have placed them against each other so you can get an idea of what works with what, and where one might wear them.

(1) Desert AUSCAM/ DPCU "bunnies behind a rock" shirt.
(2) Desert Camouflage Uniform "coffee stain cam" shirt
(3) AUSCAM/DPCU "hearts and bunnies" Raven pack accessory bag
(4) M81 Woodland on my Stargate LRP pants
(5) Multicam "scorpion cam" on my Half-Med kit

I was gifted both the desert patten shirts, and don't have matching pants. Would love to get some in DCU, nostalgic to my years living in Dubai.



Then I noticed that my Woodland pattern things were slightly different, notably the pants I wear at Stargate LRP lasertag(4) were different to the (6) 3x30rdn Mag Pouch I reviewed, which is again different to the (7) Lazy Patch Duvet suit I have. I don't know how much of a difference this would make in effect, I suspect the differences are slight enough not to matter.
My colour preference for kit is khaki, because being a soft green, and not "camouflage", I feel I can wear it in social and urban settings without standing out too badly like a mall-ninja, but I have a collection so here is some more to compare and contrast....

(8) Platatac CSI folder in their Khaki
(9) AUSCAM pistol holster, appears to be "larger" print than the pack or jacket.
(10) Hill People Runner Bag prototype in Khaki
(11)  BlackHawk! Advanced Kneepads in Coyote Tan
(12) SCAR mini chest rig (review pending)in Tan
(13) my Drop-leg holster in Woodland
(14) my fathers OD boonie-hat from Vietnam (1969-1970)

As you can see, the differences between khakis/tans/ODs  and how each of them sit against the cammo patterns can be quite striking. Having made the choice to wear the once-common and standard Woodland to fit in with the Stargate LRP idea I've been running with, it would still be easy to transition to the now popular and apparently very effective Multicam, which is probably much more suitable to the Australian scrub, whilst still sensibly utilising my extensive khaki kit.

Related Posts Plugin for WordPress, Blogger...