Review: AquaYak - Aqua II tandem kayak

A little while ago, I showed you all the AquaYak Snapper-Pro, that was loaned to me by the good folks at AquaYak Kayaks. A couple of months ago, I saw that there was a sale going on at AquaYak, and we took the plunge (so to speak) and went out to check out the showroom. It was the tandem's that had caught my eye, both for load-hauling, but also for family-moving purposes. We settled on a Aqua II tandem, in their Granite Spa colour, with a full load of accessories.

Tactical Baby promptly claimed is as "MY BOAT"

The kayak is a direct extension from the Snapper Pro, just bigger.

It features the same scupper hole and circular storage hatch system as the Snapper Pro, giving self-draining capacity to each of the two, deeply molded seats which as well as adding stability, and having their own mounting points for the padded fabric comfort seats, also feature the molded foot rests, drink holding wells (between the thighs) and anchor point for lashing dummy-cords (between the calves).

The central storage hatches had bags fitted, so your personal items don't get lost in the hull-void.

Fore and aft hatches, are the main structural difference between the Snapper Pro and the Aqua II. These hatches are held in place with a clever shock-cord mechanism, and can be unstrapped and opened with minimal effort, without being a loose or an accidental release risk. These open directly into the hull-space, and afford a very spacious cargo storage area, if you first consider the width of the openings. Stuffable packs and items will work well, but larger items might need to ride on top.

I found that I made use of the Grab Lines, which are mounted by brackets running all around the hull, for both maneuvering the kayak about on the land, as well as for giving Tactical Baby and Triceratops Girl places to hold onto when they were riding with us. As part of our deal, we bought a family's worth of life-vests including a red and black and  coyote/OD Stormrider YAK PFD for the adults as well as lurid red and yellow kid and toddler sized ones (which I will cover later). I also got several 10L dry-bags to go in the hull, and scupper plugs, to reduce incidental water splashes. 

You can get an idea of the depth and size of the two fore and aft hatches with this shot of my arm, along with the padded seal that makes up the inside of those hatches.

The same propriety 'alkatuff polyethylene' material, which holds a UV certification for maritime plastics, is used to make up all the AquaYak hulls, and whilst I have noted that my dragging, and beaching has scored the keel and sides of the hull, its all cosmetic, and a very tough, resilient material. 



At 3.8m (12.5") long and 0.9m (just under 3") wide at the beam, and weighing in at 30kg, it is quite a bit larger than the Snapper Pro, and harder to man-handle when out of the water.

At 30kg it is not all that to lift, but the size of it makes it awkward. The two sizable heavy-duty handles at the bow and stern make for easy lifting and hauling, even when fully laden with safety gear, seats, paddles and even the occasional squealing child. I've dragged it up a grassy hill by looping some webbing through the front handle. Wheels might well be in order (and AquaYak offer them)

In the water, It handles really well, thanks in part to having two sets of paddlers but is very operable with only one, even being quite maneuverable when solo.

We've it out on The Bay a number of times, and whilst its bulk means loading it onto and off my vehicle can be a pain, once its in the water , it is a lot of fun.

With a stated carrying capacity of 200kg, even with two adults, and two kids riding, unencumbered by gear, we've ridden very high in the water, and have had little trouble staying course, and upright, even on our first trips, are probably largely due tot he great design, including this tri-keel, which helps with tracking and stability, even in the moderate swells we've encountered.

I feel that if we needed to get off-shore, as simply as possible, this is a real option for us, both is speed, and limited cost. Get it on the vehicle, get to the beach, onto the water, and away ... Load it up with MALICE 2 pack, a Platatac Light Field Pack, and supplies in Dead People Jars, we could have quite the getaway. 


We put the kids in their Mudlarks All-In-One suits, to keep them warm and dry, with the PVD vests over the top, and went for a paddle one sunny spring afternoon, having been visiting with friends.

You can see that there is quite a bit of room the in the kayak, and we have found that the kids can site between our knees as we paddle, but that space could just as easily be full of packs and supplies. This is the saem beach as I reviewed the Snapper Pro, with a high grassy hill from the carpark to the beach. The weight of the fully laden kayak, over grass, down a hill was no issue at all. It even maneuvered well.

Once down at the waters edge, it was a simple matter to alight and shove off.

You can see here how high on the water we were, and whilst heading right into waves gave us some spray, we were a long way off ever taking water over the side and into the cockpit. I think we could have laden the hull with a lot more kit, and still have been positively buoyant and dry.

All in all, I am really pleased with this acquisition, and plan to spend a bunch of time on The Bay over the summer, as well as trips to local lakes and rivers.

I heard recently that AquaYak are going to stock a Windpaddle sail for their kayaks, and that is a great idea...

Review: Storm Rider YAK PFD

I'm really excited about getting my first kayak this weekend (more on that later) and that reminded me that I had not yet covered the Personal Flotation Devices that I tried out when I did a trial of the Aquayak - Snapper PRO. When you're out on the water, a flotation vest is just as crucial part of your loadout as a bump-helmet or your shark-stabbing, line-cutting knife (ok, perhaps that is a stretch).

It's PPE of the most basic kind.

In this case, I was lent a StormRider YAK PFD by the good folks at AquaYak and I wanted to show you what made it an essential part of my time out on the Snapper PRO.

These very solidly constructed vests consists of three components; the two front panels and a back panel. It features open sides with adjustable webbing to ensure a good fit, whilst giving you freedom of movement for paddling and water-borne activity.

The back panel also featured a drying hook, with a built-in nylon D-ring
The webbing attaching the front panels to the back are fixed at the shoulder and at two points on the flanks. Between these three points, the harness is highly adjustable, even down to to my light frame.

It might seem strange that the front of the vest is -not- adjustable, its three Fastex clasps hold the front panels but this in fact provides an important safety aspect. By massing the buoyant material at the front, when in the water, this holds your head up and out, ensuring the best  position for breathing. 

The brightly coloured exterior of the vest allows for easy search and rescue in the event you are lost due to capsizing, or bad weather, but you'll note that the insides are black, an unintentional asset if being less visable is desirable. Both front panels comes fitted with several zipperable pockets. The use of mesh and the water-shedding nylon in the pockets, as with the rest of the construction gave not only a number of ways to store important gear, but also to do so in a quick drying and draining fashion.


I found this very useful, as I dunked myself several times whilst in the kayak.


I was really impressed to note that the zippers were all of noncorroding plastic.

An inner retention lanyard provides an even more secure option for survival, signalling or orientation gear.

I stored my iPhone in its SLXtreme waterproof case, my car keys and the like whilst testing, all held snugly and safely.

I also noted that there was a more subdued OD and coyote-brown version of the vest, which I think will be my personal selection.

I've worn PFD's before, as well as SCUBA Buoyancy Control Device, and I really liked the simplicity, and design of this one.

You put it on, strap it to fit, and can all but forget about it when out and about on the water. In an emergency situation, you want to have the best equipment on hand to protect yourself and others from the environmental hazards you will be facing. A well made, worn and maintained PFD is a must for any kind of action on the water you might be facing.

Review: Aquayak - Snapper Pro

I was driving past a series of shops recently, and stopped at a set of lights and looked over and there it was, my local Kayak shop. I felt it was time, given the water only five minutes down the road from me and the fact that I haven't really covered any sort of transport caught my mind. I have used kayaks before, mostly in lakes and rivers in Canada, in the Rockies.

I dropped them a line after looking over their website and I was delighted to be offered the chance to trial a couple of their models. The first is the Snapper-Pro, the fully kitted version of the Snapper.

This is a 2.7m (8'10") long ‘sit-on-top’ kayak with a range of features, including coming in a range of colours, all in their propriety 'alkatuff polyethylene' material, which holds a UV certification for maritime plastics. Pretty impressive. 

The hull is deeply molded and 0.8m (2'7") a the beam. It also only weighs 18kg empty (just under 40 lbs). I lugged it out of the shop, lashed it to my vehicle (more on this later), drove it home and looked it over before taking it out on the water.
I wanted to get a closer look at the hull cross section that had been hinted at on the website. It did indeed have a very interesting profile, and I was keen to see if this unique low-drag underwater shape that provided the speed and tracking through the water without the need of a complicated rudder that they advertised.

The last kayak I had used was a "sit-inside" type, you traditionally see, and required "eskimo-roll" survival training in the event of capsizing. On the AquaYak boats, you just climb back on like a surfboard.

Here is a cross-section of the hull, sitting as a display in the shop. The polyethylene hull is both spacious and well reinforced with supporting pillars scattered throughout. The pillars seen here actually form part of the self-draining system the boats share, as scupper holes that allow sloshed in water to drain back though the boat. The hull is around 6-8mm thick, and has most of the major features molded right in, with very few cuts or holes drilled into the body.


   

The kayak has a capacity of 120kg (265lbs) and as long as you keep in mind the operator (for me, that's 85kg, leaving 35kg of gear haulage) however, after handling it in the water, I wonder if that might be a very conservative rating. There are three storage ports built into the hull, fore, central and aft. The turn-lock sealed ports allow you to store a variety of gear in the hull, away from the worst of the elements, and keep your center of gravity low at the same time. 

 

For the fishers our there, the central port comes fitted wit ha removable, drop-in bait bucket, all the better for catching the fishes with!

 

As I mentioned earlier, I didn't have any trouble moving it around, even on my own. I keep a couple of karate-belts i have collected over the years in the boot, which make for excellent roof-rack ties. The smooth edges of the hull laid right on the roof of my car and I lashed it through the built in safety lines. Getting it up and down was a pretty simple exercise, the biggest trouble was doing so in the high gusting winds I had on my paddling day. I have roof-rack rails, which aided in lashing, and I could, if i needed, have put a specialized kayak carrier on, but it didn't really need it.

 

Here's where I went, a little sheltered bay on Port Phillip Bay. You can see that it wasn't a very clear or fine day, it was drizzling on and off, a strong wind was zipping in and there was a bit of chop. There was also a fair bit of a hill to portage the kayak over. All part of the test I wanted to give it.

 

 I got the Snapper-Pro off the top of the vehicle, put on my vest, and helmet,  grabbed the paddle and trotted down the hill to the beach.

 

   

Getting it down on the beach, I unfolded the padded seat, and latched it to the loops bolted to the hull with the brass clips provided. With two forward, and two behind this padding fitted in nicely to the deeply molded internal seat. Webbing straps form each of these four points  and allow you to customise the fit and feel of the seat. I opted for a slightly lent back approach, because i'm so tall. I sat in it on the sand to adjust, then got ready to push off.

 

 

 

 

 It wasn't overly cold, but with the wind, even the bit f spray I got would be chilly, so I dressed for the occasion in my Platatac Microfleece half-zip top and matching Microfleece Sniper pants under my North Face pants and Paleo Barefoots.

I knew I wouldn't stay dry,  but I wanted to stay light, and warm.

Pushing off, I moved through the shallows, and was amazed at the very shallow draft the kayak had. in barely more than ankle deep, I was floating just off the sand, and with a gentle push of a paddle, I was afloat.

Paddling out into the bay, it took me a few minutes to remember how to coordinate arms to hips, to ensure stability, and not to dig too deeply when on the shoreward side of waves. 

All along  the rim of the Snapper-Pro is a safety line, a heavy cord, mounted securely to the  hull by a series of hard plastic loops. There are also two drag handles, fore and aft, to assist with hauling and climbing back in, should you go over. You can see here that my feet were right up to the front of the cockpit, as I have really long legs.
It wasn't uncomfortable, but an extra few inches would have made a difference for me.
One thing that I hadn't anticipated was the scupper holes letting water into the cockpit, and right into the seat of my pants. As I say, I had anticipated getting wet, so this wasn't a problem, but just be sure that you bear this in mind. For those with shorter legs than mine, there were a series of channels in the sides to act as in-situ footrests, which was a really cool idea.
I found that I could access the center port with no difficulty, but the fore and aft ports were moslty out of reach.

The kayak was very stable in the water, and responsive too. I haven't paddled for 15 years, and quickly found myself zipping over waves, from end to end of the little bay, against the current, against the wind, and across both. It was only when I over-paddled and over-balanced that I had any troubles controlling it. 

You can see over my shoulder, the elastic cargo netting,  which I left empty for my trails, but would fit a decent sized pack, like my Platatac light field-pack or a child quite happily (obviously, you don't put the child under the straps). You can also see the aft drag handle. Both the inter-hull cargo compartment, and the external cargo compartments in the aft and between my knees, so there is plenty of space to haul cargo, or passengers. Bear in mind the weight limits, and get your bug-out -kit waterproofed!

I had a couple of tumbles whist finding my water feet, and found that I could quickly (if not easily) haul myself back on board.


Not only did the kayak handle well, and was easy to right, haul and lug, it was sturdy and stable. I feel I could have fished happily off it (using either of the two built in rod-holders in the aft) although I would need practice to get my cast coordinated so I didn't dunk myself.

I had a real blast with this, and I think I will be trying to include more watercraft skills in the future in my planning.I also took a bunch of Contour Cam footage, and have included it below:




http://contour.com/videos/watch/aquayak-snapper-pro-1


http://contour.com/videos/watch/aquayak-snapper-pro-2


http://contour.com/videos/watch/aquayak-snapper-pro-3-dunkings


http://contour.com/videos/watch/aquayak-snapper-pro-4


http://contour.com/videos/watch/aquayak-snapper-pro-5-hauling