Review: ChinLin spade trowel

NOTE: rebranded but looks the same here: https://www.aussiestormshop.com.au/clearance-mini-hand-shovel-trowel-with-7-functions

Whether it's putting in crops, digging up a secret-squirrel cache, taking care of some business in a back-woods latrine or just some old fashioned fox-hole digging, having  a good digging tool comes in very handy and saves the old fingernails. I have a couple of folding entrenching tools in my camping/bug out kits, but even compact as they are, they can add a bit of bulk and weight. Sometimes they're even a bit too much tool for the job. A full-sized e-tool will make a big Dakota-fire hole, where a trowel sized tool would be more economical. I love multi-function tools, especially when they don't add function at the expense of the primary function. 

This little beauty is the ChinLin HW-901 spade and I originally picked a couple up on Wish.com but it looks like they are no longer sold there. I did find them on this Indonesian clone ( buyer beware). What it is is a 26.3cm ( 10 1/3") trowel with a para-cord wrapped box handle. Made from a  single piece of 420 Stainless steel, the handle has been welded along the middle of the upper face, obscured by the cord wrap. The trowel has a sharpened edge around 3/4 of its edge, with the final quarter being a serrated saw-edge. The spoon face of the tool has a nail puller cut in as well as a set of four hex-head wrench cut-outs. 

The edges aren't super-sharp but they're sturdy enough to chop with, which will be good for clearing brush, weeds or stubborn roots whilst digging. Weighing in at only 80g (2.8oz) it's not going to cut it as an axe, but it makes for a lively and light digging tool. The sharp edges and serrations do make digging through turf easy, and the tool-cut-outs don't effect digging and scooping output significantly.

There is a 7cm ruler printed on the inside of the spoon which is  a nice addition. The pressed steel has a spine ridge pressed in for stability and the tool is very stiff, which makes it very good when sawing or prying (splitting cracked wood or perhaps stone), especially handy when pulling nails with the nail puller or applying torque with the hex wrench holes. 

The cord-wrap is made of 290cm (9'6") of paracord, secured to the handle through four sets of holes drilled into the sides of the handle, and terminating in a lanyard loop at the bottom end. The handle has a slight taper which keeps the cord from sliding off either ends. 

Those side lashing holes and the hole in the spine of the spoon near the handle of the tool can also act as attachment points to fix a pole fitted into the hollow handle, either acting as a extension to the handle, or to turn the tool into a spear. 

The tool comes in a hand if pretty flimsy nylon pouch with a belt loop. I've found it very useful to have on hand when picnicking or hiking. The pouch keeps the sharp edges secure. 

I bought one for myself as a tactical hand shovel, and another for my veggie-garden planting partner. We've both put it to  good use and they've never failed us. 

Panjang Handle: 10.4 cm

Sean O' Hare's Knife, the Badger

Here's a guest post, in conjunction with the good folks of Breach Bang Clear!

Sean O’Hare Knives has been making custom knives since 2001, and Sean began doing it full-time in 2009. He hails from Canada, and he is also a very skilled photographer. Sean makes fixed blade knives, including drop point hunters and tactical tantos, and folding knives, including flippers. If you’re into knives, you owe it to yourself to look him up on the ‘net and check out his knife creations. They are utterly beautiful, both in form and function. A Sean O' Hare knife can be very dressy and ornate, while others are simply well-executed and practical. For certain, he makes something for every taste that’s out there.

The fit and finish of his knives are extraordinary, whether we’re looking at the dressier knives or the knives intended for more hard, practical use. He prefers G10, stabilized woods, and Micarta for handle material on his fixed blades. He uses the stock removal method.

The grip fits most hand sizes like a glove!

The Badger Model   

I have an example of one of Sean O' Hare's knives that I’ve owned for quite some time, over ten years. The Badger model falls under the tactical class of knives, although it could certainly be used for a host of duties, including Bushcraft/Survival, defense, hunting, or knife reviews.

Blade

The blade of the Badger is made from CPM 154CM steel and is approximately 4 ½ inches long, although the choil adds a bit of length (I did not count the choil portion as part of the blade). Blade configuration is of the drop point variety. The blade stock is somewhat thick and stout, but the flat grind lends this blade as an excellent slicer. The CPM 154CM steel is not the latest, greatest wonder-steel, but it is a solid performer that’s been around for quite a while. Its virtue is that it is relatively easy to sharpen and holds an edge for a decent time under use. I’ve been delighted with it.

The Badger in its natural environment. Note the striking pommel.

Pommel and Handle

A guard is built into the knife in front of the handle to keep the hand from sliding up onto the cutting edge. In front of that is the aforementioned choil, which is helpful if the user wants to choke up on the knife for added control during finer cutting chores. The handle of the Badger is full tang, and it has a triangular striking pommel at the butt of the handle, complete with a lanyard hole and jimping. The pommel edges were sharp and tended to abrade my side when I carried the knife, so I took a diamond stone to them and rounded off the edges ever so slightly, fixing that issue. However, it would still be very effective as a striking surface.

Holding the handle on are three mosaic pins that go all the way through, securing the scales solidly. The handle is made from smooth dark green canvas micarta, yet it provides enough traction for a positive purchase. It allows the hand to slide around enough to reduce friction and eliminate “hot spots” when chopping with the knife so that there is no discomfort to the user. At the same time, the knife is not likely to slip out of the hand during use. Sean got this aspect spot on! In addition, the shape of the handle fits wonderfully into the hand, filling the hand well but not being so large as to be uncomfortable. Several people have tried the knife and, despite having various sized hands, each remarked that it felt as though the knife had been made just for them.

There is jimping on the spine of the blade, where the thumb is placed, which does a perfect job of anchoring the thumb to that spot while not being overly abrasive to the skin.

Sean O' Hare Knife Feel and Finish

In the hand, this Sean O' Hare knife has the most “lively” feel of any fixed blade I’ve ever handled. Not to sound corny, but it almost strikes me as “magical,” the balance, weight, and configuration just become a perfect extension of my hand when gripped. The knife’s weight is 6.2 ounces, and I’m sure the low weight contributes to the liveliness in the hand. The balance point is right where the handle ends, and the guard begins, making the balance perfect. Sean did his homework on this point, and the finished product reflects that.

The finish of the metal appears to be hand-rubbed satin, which gives a pleasing appearance. The overall fit and finish of this knife is outstanding.

Personal Opinion

For years now, this has been my go-to fixed blade when I’m venturing into the outdoors and deciding to have a fixed blade with me. I would feel very comfortable using this knife for camp chores or other woodland tasks such as building a shelter.

A great carry package for woodland jaunts. Fixed blade Badger, Spyderco Native, and Glock 43X.

Beyond that, I look at this blade as a serious defensive tool if it ever came to that. Let’s face it, if we ever have to use a Sean O' Hare knife to defend ourselves, we’re having an exceedingly bad day, but it is what it is, and I like to be prepared for all eventualities. And these days, one never knows what sort of misadventures might rear their ugly head. Knives never run out of ammo, if you know what I mean. And they’re relatively silent in operation. This particular knife would work great for defense, given its lightweight and nimbleness in hand.

The Badger is not huge, nor is it small, by any means. I’d call it slightly larger than medium-sized. It’s not something I conceal on my person when going about my daily travels. But for hiking and the like, it is just what the doctor ordered.

Here the belt clip can be seen. Clipping onto and off a belt is quick and easy, but the sheath is held securely once clipped on.

 Sheath and Sharpness

A word about the sheath: it is simple and excellent. Period. It consists of a piece of Kydex folded over and secured with rivets that allow cordage to pass through them if you want to lash it to a part of your kit. It has a belt clip that slips over your belt and hooks over it so that when you draw the knife, the sheath will not follow (see the photos, my description may not be the best here). It can be donned or removed quickly and easily yet remains secure when it’s on your belt. Tension retains the Badger in the sheath until it is drawn out.

The Badger in its sheath is a compact carry package.

How does it cut? Fabulous! Light wood cutting, chopping small branches, slicing through paracord, and a myriad of other tasks, passed with flying colors. However, it’s not a blade that I use regularly; I have smaller folding knives as my workhorses. Instead, the comfort that this blade provides simply by being there on my side makes it golden because I know it will perform, and it’s dependable when needed.

Final Thoughts

On top of all of what I listed above…this Sean O' Hare knife is simply a work of art. There’s no other way to put it, it just looks fantastic on top of being a functional piece of gear. Sean O’Hare is a real artist when crafting sharp, pointy things. If you haven’t checked out his cutlery, jump on the internet and look him up. Be aware, though, his knives are very much in demand, so it’s not certain if he will have inventory lying around ready to go out the door. There may be a bit of a wait, but I can personally tell you that it is worth it! There’s just something about holding a hand-made tool like this in your hand that gives a feeling of satisfaction.

These days, his fixed blade knives seem to be in the $425-$450 price range, but don’t quote me on that. Check ’em out, you won’t regret it!

 

About the Author:

Jim Davis served in the PA Dept. of Corrections for 16 ½ years as a corrections officer in the State Correctional Institute at Graterford and later at SCI Phoenix. He served on the Corrections Emergency Response Team (CERT), several of those years as a sniper, and also the Fire Emergency Response Team (FERT). For 25 years, he was a professional instructor, teaching topics including Defensive Tactics, Riot Control and Tactical Operations, Immediate Responder, and cognitive programs as an adjunct instructor at the DOC Training Academy. He was then promoted to the title of corrections counselor, where he ran a caseload and facilitated cognitive therapy classes to inmates. His total service time was close to 29 years. He was involved in many violent encounters on duty, including multiple unfortunate incidents of fatalities. He is a regular contributor to the KEEN INSIGHTS column on The Mag Life.

Review: ZU Grunt

ZU Bladeworx Australia

I'm a sucker for a well made blade, and it's always hard to turn down an opportunity to add to my collection. I've been a fan of the ZU Blaadeworx knives or a long time and was already a proud owner of their Mekanix which lives in my IPad bag and goes most places with me as part of my EDC loadout. A friend loaned me his FFSK to review and it was sweet piece too. I've been lucky enough to follow along in the ZU Nation facebook group which is where other ZU owners congregate. This is where newreleases are announced and the pre-orders are advertised.

As the ZU Bladeworx business case revolves around small batches of blades being made and selling-out almost before production beginning, the best way to lay hands on a new one is to monitor the upcoming releases. So, when I saw the Grunt coming up, I thought I'd splurge a little and put my deposit down for a pre-release. A few weeks later and some production shots later, the "round 2" payment came due, and I started getting excited.

Once I had it in my hot little hands I was immediately impressed with its heft. At 220g (7 3/4 oz) it fits nicely into the niche the MSM-KA-BAR MSM-001 makes, size wise, whilst being a little less aggressively built. Sometimes you can have too much knife. The Grunt's skeletonised handle reduces the overall weight but maintains a lively balance and also allows for a variety of cord-wrapping options. The finger grips were not unlike those in the Mekanik, which were nicely finished so as not to tear up the naked hand.

The lines of the knife are very simple, almost plain, but that lives up to the Grunt name of the blade. Another similarity to the Mekanik is the grove running down the flat face of the blade on either side. This reduces the weight and would ad stiffness, on a longer blade, something the Grunt is in no danger of needing. its 6.5mm blade thickness is not playing around. This isn't a scalpel, its a pig-sticker. Like all ZU Bladeworx blades, it ships with wicked keen edge. Milled from high grade tool steel Cryodur 2379
 [D2] and then black nitride treated, after hardening to a Rockwell of 58-59HRC. these are hard-wearing blades.
I'm not one to abuse my knives, and save from an occasional battoning I see a a knife like this as a cutting, slicing and chopping tool. If you need a pry-bar, or a hammer, get one! That said, once I mounted the Grunt to my hiking and adventure "battle-belt" with its supplied updated Blade Tech Tek Lok spring-loaded locking belt fitting. I've used the older Tek Lok and this was a marked improvement, nicely paired with the knife and its kydex sheath.  It was so comfortable I went out shopping a couple of times with it on my belt not even realising. I managed not to land in any legal trouble, but thankfully no one at the hardware store cared I was sporting a hefty fixed-blade on my hip. That is actually a good point. for all its mass, he Grunt is not a large knife. It's a sensible size for sensible jobs. I take it camping and frequently do some camp-craft with it. not only food-prep but whittling and kindling making, I've also used it for crafting pot hooks and fire-tending sticks.

The blade features jimping on the spine and a notch forwards of the guard to allow the user to choke up the grip for fine work.

Here's a little bit about ZU Bladeworx, because  I think they're a really  interesting company with some important and relative contacts: They are an Australian owned an based manufacturer of Close Quarters Combat equipment and are a trusted manufacturer to the Australian Army. They have an ADF issued Roman Vendor Number.

They work closely with Australian CQC experts including Paul Cale and Ray Floro, both who are internationally renowned hand to hand combat experts. Paul and Ray are both CQC subject matter experts to our own Aussie Army and foreign allied armies.
Their products are either made in Western Sydney, NSW or North Brisbane, Queensland. All our products are legal under NSW and Queensland state weapons laws for civilian ownership. "Legitimate reason for carriage" is an important phrase. 
Most of their knives are limited edition and include the following;

There is an active collector community with a brisk buy/sell/trade philosophy in case you particularly want to get in on the action.

These are a solid, no frills, hardy blade, good for hard use as well as delicate and fine tasks. Deliberately engineered and superbly finished, these striking blades are both a collectors delight and a prepper's mainstay.

Review: "Rambo" mini machette

One of the self-appointed stoke rehab tasks I set myself was to clear some of the backyard jungle, to make way for an over-arching clean-up we badly needed. Normally for brush-clearing I would turn to my Ontario Blackwind, or perhaps one of my other-mid-ranged sized blades, or even turn to my petrol powered brush-clearer, but I wanted to get some physical exercise and didn't want to be swinging long-blades round where there were metal-posts and the like in there field of fire.

As it happened, I had had this particular blade sitting on the shelf, never used. The backyard jungle is clogged with morning glory vine. It's a fast growing and tenacious vine and needs a fair mount of chopping to get through it. I thought this would really do the trick. Weighing in at 1.25kg (2.75 lbs) with an overall length of 37 cm (14.5"). The blade makes up a hefty 20cm (8") of that.

See the rest of the article here on Breach Bang & Clear!

As a heavy-use tool, the "14" RAMBO TACTICAL Combat Survival FIXED BLADE KNIFE  Bowie Hunting Machete

Review: Appalling Mall-Minja wall hangers!

Originally posted as part of Breach Bang Clear's ongoing Monday Night Knife Fights series.   

I talk about good knives, swords and axes a fair bit. I'm fan of dense steel with an edge. There's a lot of it out there, some good, some amazing, and some unspeakable trash. It's the latter stuff I want to discuss for a bit.
Lets talk Mall-Ninja wall-hangers. First you might ask, what's a mall-ninja?
A mall ninja is a breed of weapons and combat enthusiast characterized by being so ungrounded in reality as to make even the most hardcore gun nuts shake their heads. Equal parts naïveté, delusion, and obnoxiousness, the mall ninja contributes to countless ill-informed online debates concerning arms, armor, and warfare, and is a common consumer of assorted paramilitary woo, broscience, and shared misconceptions about history and the world. The term "mall ninja" is pejorative; no one self-identifies as such. We hope.
If you're worried there's a simple test you can take to assess your-mall-ninja status.   Good luck.
Now, if you're an avid Master Ken of "Enter the Dojo" disciple, you've probably had all the training and experience you'd need to make your own correct choices when purchasing your own pointies.
When it comes to some real Mall-Ninja wall hanger blade there are some key aspects that seal the classification:

1. Black. Real Ninja's need black weapons for their Tier One Wet Ops. Powder coated, painted, teflon coated, oxidised, it doesn't matter.
2. Cord-wrapped handle. Every real street-samurai wants their blade wrapped samurai style, and that means cord-wrapped.
3. Curves. Like every bad-lady out there it has a curves and every mall-ninja want's a bad lady of their very own.
4. More curves. See Above, but unnecessary curves are even better.
5. Extra cutting surfaces. Primary edges aren't very high speed-low drag. For true body-dropping power, you need blades on all faces.
6. Unnecessary serrations.   It's not a sharks mouth, buddy, its a knife. You need a chainsaw, get a Husky!
7. Tactical sheath. Drop-leg, back-scabbard or just "ballistic nylon".
8. A scary name. "No one would surrender to the Dread Pirate Westley."Add a few "NINJA, ZOMBIE or DEATHs in there for good measure.

However; there's a lot of shiny bling out there. Here's a quick guide to some examples.

A - Zombie ass kicker. This is a bad-assed blade, but a serious wall-hanger. Extra serrations, extra edges to catch and snag, it's styled after the Aztec war swords to look extra scary. Ribbon-wrapped rather than cord, and a pretty thin, light steel. I don't have much faith in it's utility.
B - Living dead apocalypse full tang ninja sword.  Twin blades are better than one, obviously. Extra curves and serrations along the non-striking edge of the blade, as well as holes cut into the blade to lighten it, adding weakness.
C -"Hunting Knife." Perhaps if you're the Predator tracking Dutch and the other Rescue Team members.. This no-name piece  actually performs pretty well, regardless of its extra curves, useless serrated spine and extra holes. Its "full-tang, one-piece construction" is quite sturdy and the cord wrap handle well done. It's pretty well balanced, well finished, and were not for the extra holes and the saw on the spine, it might not even qualify as a Wall-hanger for Mall-Ninja's were it not for the dual shoulder strap back-holster  and the extra holes.
D - Black legion undead machete. Scary name, and wicked post-apocalyptic hammer finish. Now just add to the list the impressive looking spiked knuckle-guard, the "zombie-green' cord wrap and the drop-leg sheath and you've a "take-em-all-out before they getcha"special to scare mom with if she ever busts in on you practicing kata in the basement. water-bottles and melons of the world beware. To be fair, the blade appears to be well made, but the fitting are a tad flimsy for my tastes.
E - Z-hunter-axe. Not really an axe. Not really a hunting knife. Unnecessary saw-back serrations, extra curves and hooked edges. Great cord-wrapping and a single piece of steel for resilience, with sick jolly roger logo for extra-scary pirate aesthetic. Maybe if you're going from to room on a beached Somali cargo ship? I have a feeling it wouldn't  serve too well dressing a water-buffalo either. But zombies? narp.
F -KA-BAR War sword On first glance, this one looks like a prime candidate for Mall-Ninja wall-hanging.   It's got some curve to it, a lurid green scale grip, for extra zombie killing power, and a fully decked out nylon thigh sheath. However, its a serious work horse of a knife, but the scary name, and green scale gives them the potential for Mall-Ninja wall hanging.
G - Ontario Black Wind. Not every Mall-ninja wants a blingtastic katana straight out of Highlander or Blade. Some might prefer a more-or-less traditional "ninja-to style" short, straight and heavy sword, which is exactly the kind of blade that the Ontario Knife Co. put into Army Disposals and into the pages of martial arts catalogues. This is a bad-ass blade, undeserving of any scorn, and is in fact one of my go-to blades in the event of Apocalypse or civil unrest.  Even with its high-speed looking kydex scabbard,  just too good to be a wall-hanger.
H -Cold Steel Gladius. Last up from my own collection is the hungry-for blood Gladius from Cold Steel. Now, even the mighty Roman armies had their own groupies and  modern-day hangers on, thanks to a steady stream of "sand and sandals" action pictures. The humble Roman ground-pounder was issued one of these Gaul-stickers and bade go forth and pacify the Empire. The modern version hanging on my wall would have been a high-tech marvel of construction but fit in nicely in the shield-wall. I don't recommend trying to take that angle when trying to explain why you have one lashed to your hip with your Company First Sergeant, but, if you wanted a big ass blade for defending the empire "outside the wire" you could do a lot worse than one of these.



Lets take a moment to talk thickness. Cheap blades are often cut or pressed  from sheets of thin steel. This doesn't offer much cutting mass, strength or rigidity, all things I would want in a fighting blade. Different steels have different densities so its hard to gauge what steel is in the kick-ass zombie slayer you found at the disposal store, but the thickness of the blade can be a good indicator. I've found the thinner the blade, the less likely to be a practical tool (unless you're cutting sushi or shaving).



So. My last bit of advice to prospective blade collectors: Buy quality. It needn't be expensive, but should be from a reputable maker, be it a big company or a small smith. Be sure to give your new-found tool a run through its paces, before staking your life on it, (and get some formal training if possible). Don't be a mall-ninja.

Heads up!: Zu Bladeworx Warmonger Releaase for Pre-Order

Zu Bladeworx Warmonger Available for Pre-Order

First published on Breach Bang Clear here:

One of my favorite bladesmith companies, ZU Bladeworx in New South Wales, Australia, is accepting orders for their newest bladed weapon: The Warmonger. Note that I didn't say "tool." I might sometimes use euphemisms when it comes to blades, but this is a weapon.

Apparently styled after the Imperial Chinese dadao knife, this hungry-looking cleaver will, I have no doubt, ship to you straight-razor sharp and ready to cut things in half. I fully expect the single piece construction that typifies ZU Bladeworx blades. That style, which has scales or embellishment, lends itself perfectly to cord-wrapping and multiple attachment options with the well-made Kydex sheathes and mounting hardware they offer, as well as  a number of finishes to suit your MOS.

If the name sounds familiar, you might recall them from this FFSK review.

So are cleavers tools or weapons? I chat with people about this often. Fundamentally it is the human brain that is the ultimate weapon; a knife, gun, or axe is just an inanimate object until the human brain gives it intent.
Some tools have been designed with a primary purpose aimed at combat. Some knives are clearly tools that could be used as weapons if intent was there. I know it grates on me when I watch Forged in Fire and they call EVERY knife a weapon.
As I mentioned to a ZU Nation member the other day, I like to design functional, legal and collectable weapons. Not necessarily for carrying or self defense, but to collect, like coins or watches. I call them weapons not to be a hero, but because I like industrial, futuristic versions of medieval and martial arts weapons.
I was at the cutting-edge knives display at the Sydney Show and was eyeing off some kiku and nemoto knives, very tactical-looking and scary to non-knife people. A guy next to me said, "What would you want that for? It is useless as a tool."
I told him it would be for my collection. What is the use in collecting cheap shit? May as well collect good stuff, or why collect at all. Would I carry a Spectre? No. I don't carry any knives to be honest. Do I play with them at home? All the time. Every knife we make is a functional tool, and an efficient weapon in the right hands.

Recently released and rapidly all-sold-out Omega weapons.

Warmonger preorder opened the 15th of September. Reapers opened July 1 so that makes it mid September for shipping. Machining on the Warmongers began September 15 so that seems like a good day to open the preorder. That way the Reapers and Spectres will be almost ready to ship out. Wave 2 Reapers will ship within days of Wave 1. I am actually trying to get these out a little earlier.
ZU Nation price will be $429 plus post for knife and kydex. Attachments extra.
Installment plan as follows;
1) $200 - (plus you can add attachments if you want them)
2) $229 plus post (about $20) due four weeks later
I've done one of these pre-releases and am extremely happy with my Grunt. It's a decent system and  I trust the folks at ZU Bladeworx to deliver.
Here is a batch of their also-sold-out Reaper weapons, commissioned by the ADF. This lot destined for the soon-to-deply 1RAR.
Happy Hunting, lads!

Late update from Matt of ZU:

"So more details on the Warmonger, subject to change but pretty sure it is right.
100 piece run, I can't see us doing a second wave.
Base blade with kydex is $495 (ZU Nation members get a coupon to take off $66 to make it $429 like I promised). This includes tufftride finish and black kydex (no attachments). Coupon will only work on wave 1 (in the unlikely event we so a second wave).
2 part installment. The coupon will work on installment 1.
Postage is $20 (3kg exp bag with sign sticker)
Options:
Cerakote one colour - add $25
Apocolypse Cerakote (red or bronze) add $75
Tek Lok - add $25"

Review: khukri

One of the first "real" pieces of weapon-steel I ever bought for myself was a khukri that I purchased on-auction back in 1997, with wages from a part time job I had at the time. It was a WW2 era Gurkah blade and was only listed as a "good" condition, but that was good enough for me!

The khukri is a traditional knife design from Nepal, where it is as much a piece of farm equipment, or household knife as it is a weapon. It fills the same niche as the machete does in the America's or Africa. It's a simple, uncomplicated blade that is up to the task of rugged, daily rural use.

Read the rest here on Breach Bang Clear! 


 .

They still work just fine and in fact, effortlessly bit into this beam, and I felt that in 5 or 6 chops, I could have parted it. Typically khukri's have a partial tang, which is burned into the wooden handle and glued in with pitch. I can tell you, that at 60+ years old, this blade was hungry for chopping, with not a wiggle or shake.

Wish-Lust: ZU Bladeworx Nomad

This is a follow up from a piece I covered last year, the ZU Bladeworx Mechanik straight edged blade, and their Raymond Floro Karambit which I covered at the beginning of the year.

ZU do small batch runs of their knives, usually on pre-order. They are an Australian owned and operated edged tool manufacturing business, who specialize in CNC manufactured, industrial strength, edged tools. All their products are 100% Australian made, with the entire fabrication process being local, from the initial machining right down to the final edge sharpening. They use high impact tool Cryodur 2379 (D2) steel for all their knives.

This is the Nomad, their new piece, the blade is 10.2cm (4") long and 0.6cm (1/4") thick. The handle is just over 4" long and just over 1cm (3/8") thick. A deep fuller down the blade and a skeltonised handle of this single CNC milled-piece cut the weight down to just 147g (5.1oz) without sheath, even with the large ring at the pommel.



The Nomad, like all the ZU Bladeworx blades are double tempered and cryo heat-treated with a black oxide finish (although there is an optional battleworn finish which is rubbed down black oxide available).

Double edged, this is a serious fighting knife, and comes with a kydex sheath with a friction lock. Being double edged makes it a dagger in Australian law, so be advised if you are intending to get one, and be aware of your local laws, but there''s no denying it's a rugged looking piece.

All our ZU Bladeworx'  tools are warrantied against manufacturer defects and damage during normal use. They expect their tools to be able to handle abuse, but you need to be sure to remember the warranty only covers against reasonable use, not deliberate abuse! They are hard tools, for hard use. My Mechanik doesn't get nearly enough use, but when it does, I know I can depend on it.

Home Front: making braided rope

I wanted to have a go at making rope from plastic bags, a project I had seen online from a few sources, like MAKE magazine which I had a subscription to for some time (thanks Wombles) and Instructables, both excellent sites for finding crafts to engage in, especially to check out a range of ways to do similar things. There are certainly projects that would suit a range of needs, check them both out.

I started collecting plastic shopping bags when we went shopping, bags I would have ordinarily recycled either when we did our fortnightly recycling bin, or back to the supermarket to the dedicated bag-recycling point. I also had a friend bring a butt-load of them as well.

The primary construction of a strand of bags rope is to cut the bag from the bottom of the handle loops, on both sides, down to the bottom sealed hem. this gives you a double loop of plastic fabric, that is very sturdy in the up-down axis.

It's possible to then loop one bag into another with the working bag looping through the exposed loop of the standing bag, and then through itself, and when the knot is sured up, a very solid join is made.

Repeating this process, with a fresh bag being looped into the end of the standing end, the chain is continued for as long as you want. I wanted to braid my strands, so I created three fifty-bag chains, and lined them up. This was a mistake.

I found that having the full lengths meant that when I was braiding the lengths were constantly getting tangled with each other.

My solution was to bundle up the three lengths into some of the heavier bags I had left over. These gave me a far more manageable bundle to braid with, but were still bulky.

A far better idea would have been to make short lengths of 6-7 bags long and added more as the braid progressed.

One trick is to ensure that the three chains are off-set such that the knots don't bunch up in the braid, and this gives the rope something that ALL "primitive" non-monofilament ropes benefit from. Weakness in individual strands are overcome by the braiding (or twisting in twisted ropes) and whilst there may be individual components of the cords that have damage, or weak points, the overall effect balance that out, and supports itself.

One thing I found during the braiding process, I encountered many of the sides of the cut edges hanging outside the braid, and these tags of plastic can be woven back into the rope fairly easily. Where I could, I knotted them and ensured they would not spring loose. I could have twisted the chains in order to capture the tags, but that would have increased the effort needed to make the rope considerably. All in all, once I had my three strands of chained bag-loops, the weaving process took around an hour, and was a reasonably simple process. Keeping a uniform braid is the key aspect for this, and those first few meters were the hardest to keep even, mostly because of the super-long chains I started with.

Making the chains was another time consuming but simple process, light work made quick by my Big Wet cyberpunk pals one evening as we watched John Wick (epic, awesome movie!) one evening. Ensuring the side-seam cut was correctly made, and didn't cut too far to either side, leading to failure of the loop, was one problem, and lead to some wastage. Generally, the plastic gags were remarkably robust, and the chains themselves were quite sturdy, especially if given a slight twist to gather them up.

Once braided, the resulting rope was really quite sturdy. I was able to loop it over a post and pull on both ends with all my strengths without any problem, and lean back with all my weight on it. I had hoped to get some better way to test it, but I'd say that for a static load, they are quite stable. I suspect they could be used for any number of lashing, binding or dragging tasks, but I wouldn't want to use them for any life-sustaining tasks unless there were no alternative.

So, from approximately 150 bags, I made a 10m length of braided, 3-strand chain rope, purely from salvaged shopping bags. None too shabby.

Review: SparrowsLockPicks - HALO points

As well as all manner of other pointy things that I like, I also enjoy archery, though I have not done much for some time. My first bow was a bushman bow we picked up living in Gabon, west Africa, with gut string, bamboo arrows and iron arrow tips. Much later on I bought my first proper bow, after many sticks and twine attempts, in a 30-35lb pull composite recurve, which I got primarily for LARP purposes, but also some target shooting at home.

I also have a Japanese yumi longbow, which to my shame I have never put to proper use (I need to get myself some of the correct sized arrows, it takes much longer lengths than Western arrows tend to come in).

Read the rest here on Breach, Bang & Clear.



The HALO points



I especially enjoyed working with these pieces, and whilst small in the hand, they have a sincerity to them that comes from good design.

Available in Singles or as a Full Set from Sparrows Lock Picks, the HALO points are well worth adding to a bug-out bag, SERE kit or just have handy when you need a little blade.