Showing posts with label Soldier Systems. Show all posts
Showing posts with label Soldier Systems. Show all posts

Thursday, June 5, 2014

Review: Exoskel shin guards

I love armour. I love scrambling and climbing. I love not bashing my body to pieces or exhausting myself.

So when I saw these awesome pieces on SoldierSystems I knew I had to see if I could get some too. Stephen Guiney of ExoSkel was kind enough to get back in touch with me and as it happened was traveling on my side of the planet, and hooked me up with a pair. I've worn a variety of shin-guards in the past, through both my LRP days, roller-blading and when I've been doing a variety of adventurous things I'd rather not crack a shin whilst doing. I've worn several different kinds of knee-pads in the past, but these are something entirely different.

These are the Exoskel X1's (X2 being the production model on sale now).

Constructed from an advanced polymer, with closed cell foam backing and heavy duty stirrup strap, buckles and webbing and Fastex-type calf straps, these are some very rugged and rigid shin pads, which come in at only 500g (1.1lbs) apiece. They come with Self Extinguishing Fire Resistance, which is UL94 VO rating.

The most striking aspect of the guards is of course the five rows of teeth that make up the face of the guards. These are sculpted directly into the face of the guard, each with a downwards facing slope and butted tip, these are designed to grab and hold any surface that you happen to be scrambling over.

Where in regular climbing situations the usual rule is "3 points of contact; feet and hands only" in practice, and in stressful situations this goes right out the window. When going through a window, up a ravine, over a wreck or refuse, knees, shins and elbows all come into play. That is when something like the Exoskel's come into their own.

The guards (teeth, buckle, stirrups) hold in excess of 450 kg (1000lbs) when vertically loaded, which is equivalent to a drop of 150kg (330lbs) from 50cm (19"). The good folks at Exoskel went as far as to explain these figures as the following: "The measured strength of the dynamically loaded Exoskel products tested was higher than the maximum dynamic load estimated for an assumed in-field loading scenario with a 330 lb (150 kg) user and a 19 in (50 cm) drop onto a hard object."

A 50cm drop is a long way to expect any wearable piece of retention gear to take when that laden. My 215Gear Retention Lanyard is 17" long and stretches to 26" meaning you are limited to a maximum of a 26" drop, and that is a dedicated safety line. These are not designed for that kind of thing.This is a climbing aid, not a safety tool.


In fact, Exoskel stress their product is to be used for stabilization assistance and lower limb protection only. It is not a climbing safety device or harness.

That said, I was quite happy with dangling myself off a packing crate with a shin on each rung, no problems. I have tried them on a variety of surfaces and materials now, and have been really pleased with both the bite and stability of those teeth. Where normally I've felt the need to kneel up onto a surface, committing that much of a lunge to my ascent, being able to go "half-way" with a shin gave me a lot more scope to choose how I ascend, and potentially limit my exposure in doing so.

I took this shot to show the tooth-marks the Exoskel's put into the hardwood packing crate I posed these pictures on. You can clearly see the three splintered spots where I moved up and down, and also the two divots in the corner where I dangled.

Very impressive, I must say.

Some of the excellent additional features they come with, such as the emergency stirrup replacement and calf-strap holes, which enable the user to use up to 12mm (½") rope / cord to tie the guards back on in the case of breakage. There are also guide-holes divoted into the perimeter of the guard to enable drilling and sewing of the guard directly to pants.


The channeled foam lining not only helped with the breathability issues often found with form-fitting guards, but the design, and thickness as well as the exterior shell itself added considerable impact protection. I'm no kick-boxer, nor did I take a sledge-hammer to my legs, but I kicked a few trees, and clubbed myself a few times to gauge the kinds of impacts I might expect to take and resist, and didn't come close to bothering myself. I'm pretty sure I'd have lost footing before the guard broke. You can even wear them over existing knee-guards, depending on the fits.

As a Close Quarter Battle tool, or restrain device, I can only imagine how unpleasant it would be to be on the receiving end of a kick with one of these, or to be knelt on, but I have little doubt as to their effectiveness as a compliance tool, if needed.

They were quick to fit and remove, whilst being comfortable and stable for day-to-day wear, and low profile enough that I didn't find myself snagging on anything. This is a really great innovation and I'll be adding them to my adventuring kit, for sure!







Wednesday, April 16, 2014

Update: 5.11 Tactical - TDU Kilt re-release

The good folks over at Soldier Systems have reminded me (and now from me, to you) that 5.11 Tactical have re-released their Tactical Kilt.

I love mine, in fact, I'm wearing one right now. I brave both weather and the harassment of the ignorant (and actual Scots) to be comfortable and bad-ass. Pants are tyranny and I love freedom. Don't you?

Check them out at:
http://www.511tactical.com/kiltoff
http://www.511tactical.com/tactical-duty-kilt-134360.html
and hopefully on http://www.511tactical.com.au/ soon

Available with the following colors: Khaki (a greenish brown), Coyote (a tan brown), TDU Green, Tundra (a deep green), Charcoal, Dark Navy, Black, original MultiCam, and Realtree Xtra and in sizes 28-54.

If that wasn't cool enough, 5.11 are also donating $10 from every kilt sold to FBINAA and We Salute You Veterans.


Wednesday, December 11, 2013

Review: American Kami - Super Colubris knife

I really splurged recently, before I realised I needed to replace my old vehicle (woops) when I saw that DJ Urbanovsky of American Kami was offering a series of his knives that had been dinged up in the grinding process, as <B>eater blades. Basically they had slight cosmetic blemishes, but were fully functional, for a significant discount. Perfect!

I had seen the American Kami blades as a Soldier System sneak peak, following on from an amazing piece on some axes he has made I was thrilled to have this piece arrive, and get to using it.
What really keyed me onto this one was the crossover in design between a chefs knife, and a combat knife. I go-to kitchen knife till now has been my Global 14cm Vegetable knife and their 20cm Chef's knife just for reference. Ok, perhaps its a thin line of reasoning, but this is an awesome addition to my collection in any regards. So, here's what I can tell you about it.

The 15cm (6″) blade is crafted from CPM S35VN (the same company produces the CPMD2 steel in the SAR ODDjob knife). The Super Colubris features a tumble over heat treat finish, which gives a lovely finish as well as a great edge. This model offers a modified droptip and is 27cm (10.5”) in overall length.

The Super Colubris comes with a very nice kydex sheath, with eyelets, and is fitted out with an interesting gutted paracord lanyard system, which DJ covers in this clip of the smaller American Kami Colubris "mid-tech" knife in his safety briefing and preferred carry method video.



 From this angle you can see the two sets of three finger gripping crenelations on the spine, these feel great on the thumb, or the webbing of the hand when holding it by the bolster when being all chefy.

The G10 scales I requested are coyote brown, and feature deeply engraved "American Kami" motifs which acts as a grippy texture, without being rough on the hand. The handle itself features three prominent recessed hollow bolts, as well as a lanyard hole at the butt end, give a number of lashing options.

Being a "beater", my Super Colubris has some misgrinds on the omote side of the blade. This was part of the package of getting one of these blades at a much reduced rate, making it an affordable extravagance. You can see the deep gouges on the back where the spine and false edge meet. There is also some surface scarring on the flat of the blade. None of this has had any affect on the performance of the blade, at least not with the kind of use and abuse I expect to put it through.



With a light hacking, slashing action, I produced a number of deep penetrations in this pumpkin. Stabbing thrusts were equally as effective.



Not wanting to leave the more practical aspects out, here's a few passes of me using the Super Colubris to slice up said pumpkin. One handed and at an oblique angle, this set my dinner up nicely.

With its very well made kydex sheath, lanyard retention system, the Super Colubris is not only a very nice knife in the hand, but gives every impression of being a long lasting, heavy hitting, but controllable tool to have to hand. I am going to see about rigging it to my belts and rigs with one of the RTI G-Code wheels or a Tek Lok system.

Either way this is a really nice piece, and I'm very pleased with it in all its less-than-perfect glory. Now to save up for a Type 14 Bearded ManiAxe ....

Related Posts Plugin for WordPress, Blogger...