Wish Lust: Devtac Ronin mask

I saw some really cool masks in my thread and I got in touch with the owners, and got the low down on their line.

DEVTAC co. inc. Japan started in 2010 and was a subsidiary of R&D Trading and consulting company. Devtac stands for developing tactics specialized in Business consulting and strategies. They have recently expanded their business to industrial designing concepts and manufacturing.
Their location is in Japan, Shizuoka ken Hamamatsu Shi Enshuhama Kenei jutaku 3 chome 2-22-204 if you wanted to visit a storefront, but otherwise they can only be reached online.

Their masks are not commercially made, but rather are individually crafted.  That have some very special capabilities. These are carefully handcrafted pieces customized to fit your needs.

Firstly, the masks are only ordered directly from them through Facebook, Youtube or email.

The main frame of the masks are fiberglass, with hardpoints for adding both bolt-on armour, and accessories. For those in need of Prescription glasses you can order one here. The offer several different versions, starting with the kevlar lined versions:

DEVTAC KEVLAR LEVEL 2A

Kevlar set is $1350USD ballistics tested up to level 2a(unofficial).

DEVTAC BALLISTICS KEVLAR PLATES MATERIAL TEST

DEVTAC TESTS 1 Super 38 1400fps 100gr NIJ Level 3a rating, 9mm on mp5 1200fps and 45acp 980fps

DEVTAC KEVLAR LEVEL 3A 

$1480USD Ronin mask Kevlar level 3a with 7mm plates. The Kevlar back plate to make a wrap-around helmet is $485USD and separately sold. 

DEVTAC RONIN KEVLAR LEVEL 3A TACTICAL BALLISTIC HELMET! BULLET PROOF

The main mask has an ultralight nylon fiber mesh that is reinforced with special resin and is very flexible, it can withstand strong impacts. The open cheeks are designed for easier aiming with scope or iron sights without putting undue strain on your neck. The cheek has 3 built in neodymium N52 magnets on each corner on both sides so it is absolutely hassle free when you want to put on or remove the cheek plates as quickly as possible.

DevTac masks come in the following sizes:

regular long- men 180-195cm tall 95 kg in weight

Regular short - men 158-175cm tall , 60-80kg in weight

Wide long- men 180-200cm tall 90-220kg 

Wide short- men 158-179cm 90kg-220kg

All the lens frames are ventilated by built in AA battery driven micro fan and a speed dial down by the cheek, and by some very clever design to both vent, and circulate air, they offer fog-free vision, with around a 120 degree arc of vision. The polycarbonate lenses fit into a removable frame and can be popped out to replace scratched or damaged units.

A cover is available for paintball users to stop paint getting blown into the mask from eye-hits.

For those of you who don't tend to face ballistic threats,  DEVTAC RONIN MASK(fiberglass) with  7mm fiberglass plates are $ 480USD comes with 2 pairs of lens, clear and amber or your choice. Without the plates is $350USD. including everything. 

BACK HELMET with extender and plates is $195USD and $145USD without  plates, (as an add on), as with the kevlar version, this offers fully-wrapping head cover, and an enclosed shell, held in place with straps and magnets.

Additional options are things like a built in NVG PLATE with shroud: ($75USD-Fiberglass $135USD-kevlar) and even a MOHAWK helmet decoration for $69USD.

N50 Neodymium magnets spaced around the back of the mask, and the front of the back plate to hold it in place. Each magnet has a 1.2kg pulling capacity, so are very sturdy. The cheek plates are also held in place by magnets, allowing the user to remove them in the field to give you a cheek-weld to a rifle stock or to improve venting. The crown, mouth and ear plates are bolted on, for stability, but have venting ports, with heavy mesh below that, to give venting access for when you need.

All parts are replaceable. The mask has 1 year warranty on electronics and 2 years on the frames.

Paint options depend on the availability of the paint for DecTac at the time. They also offer water transfer prints with Multicam and ATACS now available for $80USD per frame.


DevTac aims to provide Airsoft and Paintball PPE but their venture into kevlar lining might well make them a player in designing armour or use in more dangerous fields.

They offer the Ronin helmets in a variety of colours, with the flexible polymer base and nylon mesh inner, the plates and eye lenses, along with all the straps you need for a front-facing mask, or the magnet attaching options for the back-plate if you choose to go that route. One thing you'll need to keep in mind is that manufacturing is only done every 3-4 months or so, and slots are limited so DevTac ask that interested people make a reservation.

Payments are through wire transfer, and Western Union and pre-order needs a down payment of $200USD for airsoft version and $500USD for ballistic version. Shipping is 45.00$USD (kevlar version is 65$USD) Japan Post, EMS or SAL worldwide flat rate. Extra pair of lenses are $27USD.

--------------------------------

SAMURAI MENPO MASK 

Basic price is $115USD it includes magnets and garter straps and triglides with no metal bolts.

$145USD will include the metal bolts and holders and leather straps. 2 years warranty.

Shipping is $35USD, and is sent via EMS Japan Post and takes 4-7days

They ask for a downpayment of 50$USD for the menpo.

The DevTac masks are most excellent to look at, and if the field-footage is to be believed, they do the trick. I'd love to get my hands on one, for shear bad-assery, let alone armoring my head.

Review: Arena FlackJak goggles

I picked up a set of goggles a while back which I have added to my gardening, crafting and disaster preparedness kit. It's been a whiles since I have had a big set of goggles, my last set being a paintball mask, as I've made do with safety glasses or my much loved (and currently broken) Barz Optics goggles glasses to protect my eyeballs, in a way that my slim glasses just don't.

High speed fragments, harsh chemicals, dust and smoke in the eyeballs are just no fun and will ruin both your day and survival odds, which is why I look for ways to protect mine.



These are the Arena Flakjak goggles as seen under my Ops-Core style bump helmet This is the kind of setting they are specifically designed for, and you can see by the sleek fit, they really marry nicely with the brim of the helmet. They even fit my glasses reasonably well, although there is always a little skew one way or another when nose piece shares space with nose frame.

Arena state that their goggles feature what they call Razorback technology, which deals with fogging, particulate and moisture, by providing the a good airflow rate with a really interesting ridged vented filtration to create non-fogging conditions behind the lens while preventing debris like sand, moisture, and flying debris to enter the goggles.


The lens itself as well as the anti-fogging coatings, features OptiWide geometry which really makes for some really good optical clarity and distortion free peripheral vision to at least as far as I can see clearly with my glasses on, and only reduces my overall angle of vision by about 2cm or so at each side.

The lens material is ballistically designed for maximal eye safety exceeds Z87.1 - 2003 Plus standard and meets MIL-STD-662F (as related to .22 caliber, 17 grain, Type 2 fragment simulating projectile) standards. Which means my assertion for using it for for yard and craft work is probably spot on. Power tool fragments are not your friend.

One really nice feature of the goggles are the Buckle Management Retention Fastener (BMRF). This system allows for both quick and easy strap replacement, but also sturdy fitting both over a helmet, and against your bare head. The fits are quite different, and the rotating fastener really allows for this.

The modular buckle system also provides the goggles to integrate with a variety of helmet platforms, I tried it with my bump helmet, but also my Pro-tec Classic helmet and a couple of the hard-hats I have laying around.


One really important feature of any goggle is the lining and seal. The lining of these are made of the VS Foam, which is a proprietary goggle foam designed to wick moisture away from your face. The surface is comfortable, and the body both compressed enough to make for a good seal, but also not so soft as to over-compress.

I recently took them out for a running test which gave them a pretty good test of the fogging as well as the fit.

The certainly fit very nicely, were stable and very comfortable, but after about a km in, at 12kph, they began to fog up, and stayed that way, on or off, for the duration of the run.


I suspect that in a dry environment, they would probably work out pretty well, or perhaps if there had been more of a breeze, and a third party de-fogging treatment might well prove effective. It was a shame to find how fogged they became, as I can imagine in a hostile environment, or undergoing other strenuous activity (as I'd also found this to happen whilst doing some grinding and drilling and home) that this could be quite a risk to be aware of.

Still, I'd rather have some goggles than NOT have some goggles, and these will certainly have their place in my preparedness kit, to be sure. 

Review: Jackeroo hooded vest

Melbourne's inclement and changeable weather leads to some interesting clothing requirements. Just as in Crowded House's "Four Seasons in One Day", we can have a weekend topping 37oC and dry, then 25oC and tropically steaming and wet to 19oC drizzly and dank by Tuesday. Seasoned Melbournites can usually take this in their strides, and plan appropriately, (even if our tram and train networks seemingly can not), however having some multi-seasonal pieces of clothing goes a long way towards not being caught too badly off guard. My take on this is to wear layers, and take-off, or do-up as required. I usually keep a pair of fingerless gloves of some kind stuffed in the pockets of most of my coats and outer-wear vests, and a bandana, shemagh or Headsox scarf to round out my options. However, here is a piece of clothing that fills several niches at once. This is the Jackeroo hooded vest, which is a KMART line, apparently. I'm a big fan of vests, mostly because I wear my holster harness all the time, and a vest is a good way to cover up its lines. This adventure-wear vest is no exception. With long lines, it comes down past my belt line, even in size M, and zippers shut to give me a nice snug fir to keep the wind and weather out. There are two chest pockets, closed with hook-and-loop, one of which featuring a second, zipperable pocket and lanyard loop. The outer is a tightly woven nylon and the inner is a breathable and wicking polyester mesh.

Below this are two bulkier triple pockets; one side opening pocket for hands,and two buttoned-down gear pockets on each side give ample storage capacity. The bottom of the left pocket has another lanyard loop. The waist has a well fitted and mounted shock-cord drawstring, adjustable on both sides. The hood buttons to the body with press-studs and features the same wicking mesh as the body. A great feature of this hood is the incorporated bill, which extends past the drawstring, a great addition for glasses-wearers like myself.
 The collar of the vest also has some good features worth mentioning.

As well as having a press-stud closure, the high collar is tailored to stay up without being too constrictive, which is a welcome relief to those of us who don't like water trickling down into our drier layers.Not only is the vest quick drying (but not waterproof, mealy resistant)and very light, it also packs down int a very small bundle, for when you want to either pack something just-in-case, or the weather changes and it's too much to wear. I usually just open mine up, as the light material just whisps around me day-to-day. I have only seen these in khaki, which is great, as it's my colour, but the other products in this line also come in light-safari-green.

I'm very happy with this as an inclement weather vest, camping and adventuring-wear, and urban preparedness ready piece of clothing. It fits my aesthetic nicely, and is hard wearing, light and suitable for multiple conditions.

Review: Barz Optics Sunglass Prescrption Goggles

I've known that I've needed glasses since I was about 15, and have had a variety since then. I've also lived in some very sunny and bright places, like Dubai, Calgary, Melbourne to name a few and I've had to either choose squinting because of glare, or squinting because I'm a touch short sighted. I tried contact lenses a few years back, but reacted badly and came down with conjunctivitis rather badly, and haven't been game since. I'd rather see badly than not at all... They are also inconvenient when it comes to being out and about, occasionally submerged and generally annoying. I eventually decided that what I needed was prescription sunglasses and shopped around.  I looked at several of the brands that one sees professional rugged and bad-ass people wearing, but whilst doing my market research, I came across and Australian company whos products took my fancy.
These are my Barz ARFA goggle-sunglasses.
Originally designed for surfers, they are billed as being fit for a variety of extreme sports, watersports, and industrial use. Rather than having arms like traditional sunglasses, they are goggles, with a elastic strap feeding through eyelets and adjusting at each temple. I can't tell you how many times I have come across snapped off arms of glasses, or had my head smacked and lost my regular glasses. No such issue with goggles! Barz offers a range of frame and lens colours, allowing you to customize the finish in quite a combination of ways.

 They also offer several lens filtering options such as polarization, photochromatic and bifocal prescription as well as single focal prescription lenses. I oped for a black frame, amber lenses and prescription polarized lenses and have never looked back! Not only can I now see in the bright outdoors, but with the added bonus of polarisation, I can see things in a whole new light, so to speak. These are my go-to glasses when ever having to do powertool or spray assisted yard work, whether it is whipper-snippering, chainsawing or metal cutting.

The gasket fitting keeps chips and spray out of my eyes so I can keep watching what I am doing. I've also had great use for these whilst doing burning off, as they also greatly reduce the smoke and heat-glare that would otherwise inhibit my ability to see. This was of great concern whilst the Black Saturday bushfires were raging, and I was living in the forested mountains, and on high alert. Recreationally, I've worn these whilst running around the bush, camping and driving around with the windows down to great success. The UV400 treatment of the lenses fills me with confidence.

One very cool feature that I have not yet had the chance to test out is that the eye gaskets can be swapped out from the vented ones seen here, to a solid ring, to give a water-tight swim-goggle seal. The reason I've not done so is that whilst not only are the gaskets but also the nose bridge user-modifiable (three options for the nose) but the gaskets are a very fiddly modification, and I have had a lot of trouble in hot, still conditions with the goggles steaming up, something I'd rather not make worse. The manufacture is very solid, with great life so far on all parts. I sat on them once and broke one nose-bridge but they have survived considerable abuse in my care.