Review: ThinkGeek - Pocket Chainsaw

For my last birthday, I did my family a favor and purchased a bunch of my own presents. I'm notorious for having already picked items off my own wish-lust-lists.

Think Geek has been a good source for gadgets and gizmos to feed my need, and this year was no exception. The difficulty being getting items that can be shipped to Australia, as they have started restricting items based on, well, "pointiness" as far as I can tell. The UC M48 Ranger Hawk,KA-BAR Zombie Killer knives and even the Dead-On Annihilator Superhammer available through Think Geek are not for export to Australia. Sad-making!

However, one of the pieces of kit that IS still available, is this, thePocket Chainsaw.

I have covered my Wire Saw's previously, which are a gorgeous bit of kit to have stowed away in a Bug-Out-Bag or camping set, but there are times when you really need a bit more bite.

I've never been very comfortable with powered saws, (even when Picatinny-rail mounted...) because of the risk of kickback as seen in Dawn of the Dead and described to me by a variety of experienced wood-cutters (not all of whom had all their fingers). I can and have used chainsaws, I just prefer non-powered tools to do the job. Slower, I know, but unless I needed to do a lot, and often enough to become familiar and proficient again, I'll stick to hand-tools.

This pocket chainsaw fir my need perfectly! Made of high strength, heat-treated steel which has been coated for rust resistance and smoothness of cutting action, it comes with bent rings to hook through the lead ends of the chain, and corded plastic handles to ease the cutting action, and increase the draw and reach of the saw.

The 70cm (28") saw features 124 bidirectional teeth, capable of cutting in both the forwards and backwards draw, and the beauty of this piece is that when you are done wit hit, it rolls up into a coil that fits int its own carry-can, along with the welded loop-hooks, and the whole package weighs only 140g (5 oz)

It comes with two molded plastic handles with cord loops,  which I fixed to the loop-hooks with a larks-head hitch. The loops and handles added about another 50cm or so of reach, as well as keeping my knuckles clear of both saw and log.

We had some pretty damaging spring wind-storms here, and my partner Anastasia had a largish gum-tree branch fall on her shed, which seemed a perfect chance for me to finally get to use some of my newer acquisitions.

I chopped the smaller limbs with my
Ranger Hawk, as will as its big brother, the M48 Walking Axe which packed considerable wallop for such a small cutting head. Both bit faster and deeper than my usual go-to Fiskars Log Splitter. However, when it came to cutting through logs, after I had trimmed the branches off, it was time for the saw to do its thing.

click the picture to go to ThinkGeek store!

I didn't stop to measure the diameter of these limbs, but they were at least 20cm. Bigger than my skinny little thighs, for sure.


The saw bit in fast and made quick work of the first third of the log, but I found that a comfortable, narrow shoulder grip tended to cause the chain to bind up, leading to me needing to take a very wide stance to effect my cuts.

Once I cleared the hard core of the branch, I was a matter of raising the ends, so that gravity would force the log open, to reduce that binding. This was because I was cutting "up" standing over the log. Pulling "down" and cutting a suspended branch would have been much easier, but dangerous.

When I was done, the loop-hooks simply disengaged, I unhitched the handles and stowed the coiled saw and loop-hooks in the pocket tin. The handles had to be stowed separately. This was an excellent, easy to use and practical addition to my car-kit, ready to pull out and cut up road blocking obstacles without the need for fuel, and storage space.

 

Here's just a quick picture of the M48 Walking axe, hanging off the largest of the limbs I cut with it, in-situ. The para-cord wrap on my M48 Ranger Hawk completely unraveled whilst chopping, which was very unsatisfactory. I will eventually re-tie it myself.

The folding pocket chainsaw worked tremendously well, silently, and quickly. 

Review: Get Home Bag - Bug Out Bag

Some friends of mine asked me recently for recommendations for Bug-Out-Bags, after watching the NatGeo "Doomsday Preppers" show, and The Colony.

I don't have a "Bug-Out-Bag", per se,  but I do have two "Get Home Bags". One in my car, and one is my every-day pack. 

Here's one that NASA made ...

I've covered both before, as Items, and shown off what I keep in them from time to time, but as a unit, I thought it might be worthwhile laying it all out.

My primary, EDC and "get home bag" is the Platatac Bullock Echo, to which I've added a couple of extra pouches and loaded up a fair bit. This is the bag I have with me everywhere I go, and I still manage to carry my iPad, days food and whatever else I need day by day in it. Great pack. It's a reasonable load that I carry, as you'll see, but I can run, climb, crawl, jump and probably swim with this all on me. I get some funny looks sometimes, but I'm used to that. 

1) waterproof poncho, OD / first aid kit

2) set of metric Alan keys on a split ring

3) compass

4) dmt diamond knife sharpeners

5) credit card tool / fire steel

6) wire saw

7) cord

8) Dead On Annihilator Super Hammer

9) ZombieSquad 1L Nalgene bottle

10) LaserBrite (single blue and low/high/blink red heads)

11) CRL Tactical cache

12) ZuluNulonGear CAOS admin pouch with small adjustable wrench, LED plyer multitool, Buck Tools Multitool, dexim BluePack 1200mAh ( 5V-500mAh) USB iPhone battery, UV laser pointer, kumquat carbon fiber credit card bottle opener, sharpie.

13) Figure 5 Benchmade safety cutter

14) microfiber towel

15) Berber Bear Grylls safety pack

16) Platatac Half Med pack with elastic bandage, forceps, non-latex gloves, cylume sticks, band-aids, bandages

17) GoSt PaleoBarefoots

18) Sea To Summit Alpha cutlery and chopsticks

19) survival kit in a can

20) Platatac HeadOver head sock 

21) SnowLizard solar, rugged, waterproof iPhone case

22) EcoFuture Aqua Prove

23) alcohol based hand sanitizer

24) EcoFuture hand sanitizer

25) EcoFuture foot spray

26) cable ties

27) toiletries bag with toothpaste, soap, safety razor, floss

28) essential oil deodorant bag

29) Spare glasses in hard case

30) nut and honey snacks

31) SAR GlobalTool Eclipse signaling mirror system

32) whistle

I also keep this, in the car. I consider this my "broken down in the side of the road" kit, but also doubles as my camping/kicking adventure bag. I have a full first aid bag in the car, and a fairly complete tool bag as well.

As I've covered before,  the Kathmandu Hip Bag is a very dependable, and feature rich, wearable pack.

With my FUBAR and CRKT Stiff Kiss it is quite the formidable survival pack.

Here's what I keep in it....

33) heavy waterproof poncho, Woodland camo

34) gaffer tape

35) camping propane gas

36) kinetic induction flashlight 

37) enamel mug

38) bug spray

39) sweetened condensed milk in a tube

40) roll of SES emergency marker tape

41) Gerber Bear Grylls survival pack

42) high-test marlin-fishing line

43) Petzl "figure 8" device

44) Kong locking carabiners

45) 5mm dynamic rope

46) matches

47) fishing hooks and sinkers in-a-tin

48) Sea to Summit 20L Kitchen Sink

49) hand carved snare with braided line

50) Miltons water purifier tablets

51) nails

52) Caribee backpacking stove

53) bandages

54) tea bags

55) whistle and flint

56) powdered chocolate.

I can wear both the Bullock Echo and the Kathmandu bum-bag at the same time, between the two I have a lot of survival kit in fairly small, wearable packages. Given that I don't spend a lot of time in the distant wilderness, but more urban sprawl, and country roadsides I think that in the event of a disaster in my region, I would be able to manage with this loadout for quite enough time to get home, or away, and overcome most any obstacle that I might come across.

For me the idea of a "bug-out-bag" is more of a "never coming back" bag, which would be a little more substantial, and aggressive, where these two are more a "get out of trouble" set. I can help myself, and others push through rough times with what I carry at all times, and have with me in my car...

After the Black Saturday fires of 2009 and the semi-regular flooding we are getting, I want to be ready, Equipped!




[edit] I've been asked if i would make Bug-Out-Bags for sale ... anyone interested?

Review: Civilian Labs - Hazard4 - Loader RG Harness

Ages ago I covered an essential piece of my EDC, my custom made EDC holster harness. This faithful piece has been with me for years, and has reached the end of its life. I had contacted Darrin Talbott of Extreme Gear Labs to commission him to build me something, but alas, he's just far too busy to make a wacky one-off custom job for a blogger.

Check out his Facebook to see the cool Operator gear he makes. That news sent me looking for an alternative.

I was lucky enough to spy the Jerking The Trigger post on the Hazard4 Poncho and following the links, saw that Hazard4 offered a modular holster rig! Tay from HorNest did me a solid, and shipped some over.

Hazard4 are the "Tactical" arm of Civilian Lab makers of fine modular kit. The link I followed brought me to these, this is the Loader rig
with the optional extra anatomic harness.

What it is is two sets of the Escape Rig, one for each side. The two halves are identical, so I'll cover them as just the single unit.

Here are the two Escape halves, with the Anatomic shoulder harness, and another piece at the bottom to hold them together for stability.

The pouches are made of Dobby Nylon and have "PU X 2" treatment, and measure 12.5 x18 x4 cm
(~5" x7" x1.5") externally. The main panel is faced with two hook and loop closing pockets, one that fits my Surefire 6PX like a glove, and the other which his more squat. Both of these pockets are elastic sided, and open cornered. Bear this in mind when looking to fill them.

In this shot you can see some of the rotating buckles  that are fitted to each corner, each backed with a tab of the same padded material that backs the pouch for wearer comfort.  This is some very thoughtful and innovative design. no more buckle-pinch!

You can also see one of the tri-glide buckles that sit on the middle of each of the four sides. These are for accessory loop and strapping, and I'll get into that a bit later.

The 2013 version of this pouch has all black labeling and non-reflective zippers and fittings, for even lower profile wear.



The "back pocket" of the pouch is an open slot, wide enough for my receipt and card filled wallet, and is mesh-sided to cut weight and improve breathability and drainage. (Luckily Australian money is plastic, in case I ever take a dunk...) You can see another of those elastic-looped tri-glides here, to which I have dummy-corded my wallet. No more dropping it into the toilet, off piers, or leaving it on cafe counters for me!

My iPhone sits in the corresponding other side.

What you cant see is the wide swathe of black loop field, for affixing a hook-backed holster, like the Stick-Up.

You can also see the double zipper here of the inner pocket. Very useful!

Inside that inner pocket, you see where some real thought has gone into making these pouches. As well as the tough nylon outer, they are lined with quilted micro-suede

They also feature a series of webbing and elastic channels to fit your tools and needful gear, I have my SAR Dead Ringer comb and CRKT K.I.S.S. folder in mine on this side. Passports, and paperwork on the other side.

The pocket opens all the way to the bottom, but, like a good admin pouch, it has webbing retainers, keeping it from flopping flat, but catching it at about 45o so your pens, USB sticks, or whatever don't tumble off into the wide blue yonder.

The back pocket has a press stud on webbing closure, with two sizing options, which is great. I tend to clip my wallet in with the big, and my phone in with the snugger length.

The back of the pouch features a belt loop,wide enough for all the belt I tried it on ( both my 5-11 TDU belts, the 215Gear Ultimate Riggers belt, and the PM Leather Hobble Belt.

It also features a press-stud flap option, for quick-release needs.

Why even have a belt loop? Modularity!

 Those corner buckles attach to the included cross-straps, which are two fully adjustable nylon webbing straps, with a press-stud in the middle, to connect the two.

One of the coolest things about this whole system is that it can be worn so many ways.

All of the straps will "double-back" through the buckles for a really secure fit.and the tri-glide attachment points allow you to rig any number of stability or alternative attachment options. The rotating corner clasps mean that the straps stay flat no matter what configuration you wear them in, and they stay upright as you move, depending on how you wear it.

The included cross-straps are a little more versatile than the Anatomic straps, but not nearly as comfortable. The pouches can be worn under the arms, holster style, singly or in pairs, horizontally or vertically, but also on the hips on a sling, as a backpack, slung cross-ways like a bandoleer, on the thigh as a drop-leg or on the front of the chest or even as a shoulder bag.

I used one of the cross-straps to act as a kidney-height stabiliser,  having found that on their own, the pouches slid forwards when i bent over without them.

 Here's the package insert, showing some of the carry options.....


One last thing. Each of the pouches comes with a "Shuttle Pouch" which is made from the same Dobby Nylon, and lined again in the quilted micro-suede with mesh pockets along with nylon strapping. The Shuttle pouch is designed to fit into the "Back pocket" of the main pouch,and be clipped in. It features waterproof zippers and a set of webbing eyelets on each of the four back corners for dummy-cording (mmm, dummy-cord: looks silly, keeps your gear on you...)


This was a seriously feature and function filled set of kit.

I've been wearing it now for a few weeks, getting the configuration and fit right and I must say, it has been one of my better EDC investments for some time.  I wear it every day, almost all day in some cases.

I don't feel "dressed" with out it, and it really is my go-to item when it's time to run out the door; be it emergency, fire, flood or groceries.

Review: HTI Water - HydroPack

I mentioned the HTI Water systems in my recent post about the Camping and Caravan Show that I attended, but I got in touch with John McClelland, who sent me a bunch of promotional material, a review by the 33 Canadian Brigade Group on their 2007 Cambrian Patrol exercise, which is an international Long Range Patrol (LRP) competition held amongst the highest mountains in the Brecon Beacon area of Wales (U.K). 

This exercise is designed to test a patrol’s ability to operate covertly behind enemy lines with little to no direct support or resupply. This seemed the perfect example of why I would want to look at these packs, and I was really excited when a sample arrived in the mail.

The HydroPack 6-pack comes with everything you'd need for six portions, with six sachets, six straws all held in a resealable plastic bag. All in an iPad sized pack. SO, what is it all about?

Pulled from HTI Water's press release

Each pouch is a wafer thin plastic-on-one-side and woven Forward Osmosis (FO) membrane material, which is a flat sheet, spiral wound, and hollow fiber membrane, that will allow water to pass through, but exclude and removes viruses, bacteria, heavy metals and cysts from the dirtiest of waters, and even brackish water.

HTI Water's HydroPack pouches are  designed to make cloudy, muddy or pollutant contaminated water (both natural and man-made) safe to drinking emergency situations.

It does this without pumping, clogging or other banes of filtration systems, by virtue of the orange crystals held within the pouch. This is electrolyte powder is what acts to drive the Forward Osmosis, pulling pure water from external sources and filling the pouch with between 355-500 ml of dilute, electrolyte and carbohydrate enriched clean water.

 The pouches themselves are thin, light and quite durable feeling, but obviously, they need to be kept away from water, or they will start working. 


The instructions state that within 10 hours, but no longer than 24 hours, the pouch will fill, so I decided to test this out in my own setting, and found a source of grotty water that I had on hand. I took my pouch, and tossed it into the rain-runoff barrel next to the front garden veggie patch. This barrel takes the runoff from our downpipe filled water-tank, was the former home to goldfish (who all died), and is really quite murky year-round, but I was fairly confident that if there were trouble, nothing more than a dose of the runs would be in store for me.

The HydroPack was in the barrel from 1400 till 0900 the following morning, at which time I fished it out, wipped off the outer crud, stabbed it with the spiked straw, and sucked down on a tasty electrolyte drink.

I called this a total success, and was really impressed with the taste and efficacy of the pouches. 

I am going to keep some in my car, and Bug-Out-Bags for sure, because being caught out in a hostile environment with a crippling bout of intestinal cramps (bogged in a riverbed in the Masai Mara National Reserve, Kenya for one example)  is not the best of survival strategies.

These are a very cool, lightweight, super easy to use system of emergency hydration and sustainment.  I will be looking into getting more of these.









 

Review: Platatac Light Field Pack

Time to have a look at some of the big-bags!

When I started doing more camping, whilst in Calgary, I got my first "big" backpack, (which I may dig out and go over, some day soon). Whenever we traveled as a family as I was growing up, we had a policy "pack only what you can carry" so I got pretty good at packing well, and also lugging heavy bags. A better bag means better packing, as well as easier carrying.

Having learned these lessons, I have frequently loaded my EDC bags to such a point that they became unwieldy, leading me to downsize from my Crumpler Messenger bag, to my faithful and very versatile Platatac Bullock Echo but there are times when you really do need to haul a bunch of stuff, either bulky items, or in high quantity. When this is the case, a little day pack just wont cut it. You need a proper backpack.
This is the Light Field Pack from Platatac, and it does the job!

First up, like almost all of the Platatac bags, this one is made from the rugged 1000d Cordura I've come to expect. Slick and hardy, no rough finishing, just an all over, well put together package with quality materials. The pack comes in two main components; the main body, and the removable helmet cradle and internal organiser.

The front of the cradle has 6x8 PALS/MOLLE, including a 4x2 loop field for name-tape, patches and the like. It has Fastex style buckles to connect to the compression straps on the main pack in three different locations, top, middle and bottom.

The strap-side of the pack is a sculpted, heavily padded and well fixed set of straps, with built in D-rings, adjustable and movable sternum straps and well placed, Fastex-style clips at the base of the traps for both quick release, but also comfort when wearing.

Here's a side view, showing off the 35L  capacity of the main pack, as well as the extensive 5x8 PALLS/MOLLE channels. The compression strapping is maintained on the sides by sets of Web Dominator clip. The flap at the top right of this picture is an access port, for hydration tubes, cables or running line. 

You can also see the triangular "wing" that the shoulder straps connect to the pack via on the bottom right, as well as the helmet cradle. My OpsCore style bump helmet fits nicely in the cradle, but I've also used it extensively as an "extra cargo spot" to carry my bundled kendo keikogi which is both bulky and needs airing, after training, I can tell you.

I've found that I have been able to rapidly adjust the tension of the compression straps to fit my load with a quick pull and readjusting of the leftover webbing via the Web Dominators. The nylon eyelets the webbing runs though doesn't interfere with the PALS/MOLLE channels, which is great for those who like their pouches as much as I do.

The inside of the fully openable main compartment is also fully PALS/MOLLE lined, for all those pouch-addicts I just mentioned. As well as a 3/4 length zippered pocket on the inside, the outside of the  main compartment flap also features a deep zippered pocket, and another, very large loop-field, for more patches, ID and the like. 

You can see here that I have stored my kendo armour in the main compartment, with the big helmet, gauntlets, chest-plate and groin plates wrapping the lot up. It was a tight fit, but once the pack had loosened up, I have been able to cart my whole kendo setup (baring the shinai/bokken) in one bag, with a drink bottle attached by PALS/MOLLE to the outside. 


Inside that main compartment there are a vast array of options as well. On the right side, a very large zipperable pocket, good for documentation, maps, briefings and the like. The bottom of the pack features another of the zippered pockets, good for tools and other heavy items. The back face includes a third zipperable pocket at the mid-line. 

As well as the zippered pockets, there are two elasticised hydration pockets, one at the back, and another on the left side. loops throughout the internals give a variety of dummy-cord, or shock-cording options, as well as acting as hanging points for hydration bladders. I'll be fitting a bladder to mine, to take the place of that externally attached bottle holder. 1L just isnt enough water for me after training, and the added weight going in isn't an issue. It will get lighter before I get home, that's for sure.



There was one more zipper, hidden away at the bottom of the back of the inside of the pack. By turning the pack inside of itself, you gain access to the built-in, moldable lumbar support.

This stiff plastic body has a reinforcing aluminium bar, inside a nylon sheath. This can be molded to offer the best support to the pack, and it also gives the whole thing a considerable amount of rigidity, making for easy packing, unpacking, and sitting up, when being accessed.

Drainage holes throughout the pack ensure that unexpected (or deliberate) dunks don't leave you hauling 35L of bilge around with you either. Stitched or grommeted, I'm glad they're there.

 

Another great hidden feature is the hip-belt pad, which as well as featuring a 3x4 PALS/MOLLE surfacing, and deep padding. The hip belt will clip together to give a very stable belt, perfect for long hikes with a heavy load. For those times when you don't need this kind of extra support, and don't want all the extra real-estate hanging out in the breeze, they have their own little pockets, which are hook-and-loop closing. When tucked up they are hardly noticeable and certainly don't add to bulk, or take away from storage space in any appreciable way.

Here's the inside of the helmet cradle, showing off the webbed "hinge" between the PALS/MOLLE attachment and the front flap. This forms a very useful "bucket" that you can drop your helmet, or other cargo into, secure in the knowledge that it will stay put, and you wont loose any little items"out the sides" between straps as you might in a open-bottomed beaver-tail. 

You can see here the three sets of compression clips, as well as one of the multiple loops for running a retention cord, or shock-cord through. Loads of extra features!

Here's the inside of that helmet cradle front-panel. "The Office", as Sam from Platatac called it.

On the inside of the lid, are two mesh-lined, zipperable pockets, one running the whole length of the panel, the other, midway.

On the bac of the compartment, two more zipperable pockets, the lower of the two being bellowed for easy stuffing as well as three elastizised pockets at the bottom.

This is a serious admin pouch, and there is plenty of versatility to cover all your gadget storage. I have carried my iPad, chargers, pens, paperwork, and food in this section, but be aware, having a helmet in the cradle will press up against the contents... pack wisely!

As with the rest of the pack, all the zipper pulls are threaded with paracord, for ease of grip, and deadening the metal-on-metal clinking.

Here is the whole pack from below, you can see the grommets on the cradle, both inside and out, as well as the sewn-in drainage eyelets of the main compartment.

You can also see the PALS/MOLLE connectors of the cradle piece tot the main pack, with four tabs, in channels 1, 4, 5 and 8. Bear this in mind if you plan on trying to swap the cradle onto any other packs.

Lastly, check out the 3x8 PALS/MOLLE on the bottom. This pack is BUILT for accessories!


Lastly, I wanted to give you a few shots of the pack on me, whilst bearing a load.

DEPLOY TACTICAL BABY!

Sitting happily in the back of the pack, with two sets of compression straps securing her, Tactical Baby was comfortable enough to be walked around for a while, until asked to stand up and wave.

At no point was the pack unstable, or did I feel any way at risk of spilling my precious cargo, (although I made sure I was over the bed when she stood up)

She just held onto the built-in drag handle and I have my very own Pink-Yoda ,

This is a serious pack, good for times when you need more than just a day-pack, but not quite the kitchen sink.

If I had any gripe with it, it would be the way I was using the bottom compression straps when I wanted to open the main compartment, they held it shut beyond the zipper pulls a little, but not so much as that I couldn't easily unload, just not "flat".

It is thoroughly dependable, comfortable to wear and haul loads in, even in the muggy Melbourne summer, slings on and off easily, without snagging and is filled with features.

Home Front: Temperatures

Temperatures last week at home (Melbourne, Australia) were hitting 43oC (109oF) for a couple of days, with nights of 32oC (90oF) or so. This was pretty bad, but manageable. We thermally shielded the house by closing blinds and turning off heat-sources as best we could, made sure our creatures had shade and water, and spent time out of the heat as best we could.A Fan at night helped somewhat.Triceratops Girl spent the Thursday and Friday nights off the mountain,  down on the coast with her grandparents, the cool-front came through on the Friday night.

Breaking news today is that the Bureau of Meteorology forecast for next week indicates tops of 54oC (130oF) for central South Australia. This is so hot that the Bureau had to add colours to the metric. Never-before recorded highs, significant bushfires in east coast and central NSW and the usually cool Tasmania means this fire season is only just getting started.

Prepare. Act. Survive. as the CFA recommend....

Review: United Cutlery - M48 Ranger Hawk axe

Here is my first totally "tacticool" post in a while. I have shown you some axe-love in the past, and even debunked a cancelled product post and flirted with some serious and lustful objects but haven't really gotten up close and personal with the smaller choppers, till now!

This piece of bad-assed pointy is the
M48 Kommando Ranger Hawk Axe from United Cutlery. I had seen this advertised on ThinkGeek, and loved the look of it, and for the price, was willing to grab one to mess with. ThinkGeek have changed their shipping conditions however and this as well as many other of their tool and cool items no longer ship to Australia. I don't know if this from their end or ours, but I was denied! I hate that. I managed to find alternate means of securing my item, via a well known ordering service named after a large South American river system. This too was not without issue, and following once cancellation, I managed to secure myself a chopper!

This head of this piece is "precision" cast 2Cr13 stainless steel, and features a wide bearded cutting edge, which sweeps downwards nicely, and has a very smooth geometry to its edge.The topside of the head has been beveled back and is not blackened like the rest of the head, which I thought was a little odd.. Three holes skeletonise the head, reducing the over all weight without making the piece flimsy feeling in the slightest. The back of the "beard" had a smooth finish and I felt I could grip it for precision whittling if it ever appealed to me. The whole piece weighs in at 1.088 kg (2.4lbs) and sitting at approximately 20cm (7 5/8") across the length of the head, and just under 40cm (15 1/2") "tall" This is a really light option for what it is.

There is apparently 90cm (36") a pole-axe version available as well, but it looks like it may be a different head too.



The flip side of the axe-head is this very impressive spiked beak, again with the edges being uncoated "false edges" in this case leading to a rather pointy, and well defined penetrating tip. the beak follows the same lines as the axe-beard, and sweeps downwards, aiding in transferring the energy of a swing. An interesting and well thought out feature seen clearly here is the notch cut into the underside of the beak, which fits the thumb-and-index finger top of your fist if you slide your hand right up the shaft to take a grip of just the head. This facilitates a really comfortable choked-up grip for fine chopping or perhaps cutting with the blade.
Traditionally,the back of a Tomahawk
seems to have primarily been a hammer type end, rather than a spike, which seems to have been more a common feature of the Warhammer. No less devastating when featured here though, I imagine.

The handle of this piece is nylon, reinforced with 30% fiberglass and features both a double sided "knuckle" for gripping and preventing you from accidentally sliding up the grip, as well as a series of deep groves running the circumference of the rounded handle.

A lanyard hole at the base fits paracord nicely, and in fact,  one of the options offered by United Cutlery is a cord-wrapped version (only on one colour of the handle as far as I can tell, the OD version). Speaking of which, there appear to be a number of colour options available for this, black, OD green, safety orange and rescue yellow. This is a really nice thought, allowing people to clearly indicate the tools function, or keep it subdued and inconspicuous for those people on two-way firing ranges who don't want to stand out.


The head of the axe is fitted to the haft with three TORX type screws, binding the tang to about 1/3 of the length of the haft. I was happy with the binding and security of this attachment, from the brief testing I gave this piece, but intend to do a whole lot more chopping with it shortly.

The sheath is probably the least satisfying piece of the package. Whilst the nylon and furniture was hefty and felt well put together, with rivets along the top and cutting edges, and press-studs to close the bottom of the sheath, for "pull-away" access, however, on the back of the sheath, the attachment options to mount the whole thing were pretty woeful on this model. A single narrow belt-loop was pretty limiting, and I think I will need to do some modifications before I can fit this into my current platforms and bug-out-bags. To be fair, the cord-wrapped / OD green option comes with a somewhat more accommodating sheath, with some PALS/MOLLE looking hook-and-loop tabs, but overall, this was a disappointing end to what was otherwise an outstanding looking and feeling little axe. . 

Perfect for that long trek in the bush, demounted search and rescue, breaching and increasingly for CQB if accounts are to be believed.   

VIDEO REVIEW HERE

Click to go to Think Geek store listing ....

You may wonder, in this era, why would people be interested in a hand-axe, well here are some Hollywood-produced suggestions....

Making a lasting first impression.... Colonial era style

Up close and personal, Revolutionary War style.