Review: Cybernetic Research Labs - Tactical Pen

I've had a few good occasions to make use of this particular item, and thought I should give it a review.I covered the Tactical Pen a while back. I misplaced that pen but 2 is 1 and 1 is none ...

This was another Kickstarter item from the folks at Cybernetic Research Laboratories who previously produced the Tactical Whistle and the Tactical Cache. I wanted to "collect the set" of their products, because that's how I like to test not only the items, but the brand itself. More on that later.

This is a modular pen / hex-tool / stylus / glass-breaker with aggressive knurling and grips.

Machined from aircraft aluminium (with stainless steel and titanium options, too), I had my pen anodised in their "OD green" which matched the OD green their Whistle and Cache, which I must say, is a long way off what I expected Olive Drab to be. This could just be due to the sheen of it, (rather than being a matte finish). I think I should have gotten black.

The pen itself comes in four parts; The end cap, with a lanyard hole and a titanium clip. The main body, which is threaded internally, with three deep gripping groves. It is bored to accept a Fisher Space Pen cartridge from one end only.

Either end of the body can accept one of the various heads, in my case I have; the stylus end, the pen end, the tungsten carbide glass-breaker and the hex-bit driver (which I opted to get in titanium for additional resistance to wear).

Each of the heads have two different threads, one for attaching the head to the body, and the other for securing the cap to the head.

Interestingly, the cap can also take the tool-tips, including the pen with its cartridge.

This modularity makes this tool quite appealing, I tend to keep the glass breaker tip out and exposed, both for potential escape requirements I might have in punching out a window, but also for being a rather unpleasant pointy end to make my displeasure known. I've also used the carbide tip to scribe things onto metal.

The stylus tip is not very effective on my iPhone and iPad, but they did state this would be the case during the Kickstarter.

It's a functional tool, it makes senses as a backup item.

Review: Platatac Bongo modular battle belt

It's been a while since I've covered a belt, and I picked up this piece recently, and gave it a good workout over the weekend, so wanted to tell you about it.

I've covered a number of belts before, from the surreptitiously tricky PM Leather Hobble Belt, to the hardworking 215 Gear Ultimate Rigger Belt, and the airport friendly 5.11 TDU belts as well as the very capable Young Guns Battle Belt by Platatac, so I wanted to show you this platform as well. This is the Bongo Modular padded belt (Mk2)


With 22 rows of PALS/MOLLE looping, 18 of which are 3 row, with the two channels beside the buckle being only double channel sets. This gives both a lot of real-estate to work with, but also narrows the form around the front, giving the wearer unrestricted motion when sitting, squatting or kneeling.

Designed to be ALICE compatible the belt includes 8 loops for direct attachment to harness or other vest system, such as my MAC armour carrier or the First Spear OAGRE.


It also sports 4 D-ring lash loops along the bottom, which could well be used for leg-straps too, if that's the way your mind works. The principle buckle is a large ITW buckle, as features on many of Platatac's gear. Twin webbing sliders allows you to adjust the belt from either side.

For my skinny (size 32) waist, I needed to cinch it all the way in on both sides, even when wearing it over belted pants and tucked in shirt. The up side of this is that if you have layered clothes, you will have no problem fitting it as an outer-wear layer.

I wore this out to an event, where is was doing First-Aid type monitoring, so fitted it out with my Half Med pack, a set of twin 40mm grenade pouches (they work really well as disposable glove/ mask storage, for quick access). I also fitted one of my SR25 pouches to hold my wallet, a Blackhawk removable side-plate carrier as a mini-dump-pouch, FUP pouch holding my Fenix TK-51 light, and also the SORD 870 Back sleeve, which I'm sneak previewing here. I didn't run it with a sword in it for the event I was at, actually had it filled with big cable-ties, but that's how I would like to roll... A set of CountyComm Premium EMT safety shears rounded it off.

Thankfully none of this kit was needed at the event, but the belt served me really well. The padding is mesh lined, giving it great weight bearing, as well as moisture management capacity.


I wore this rig just on my hips, no strapping, or braces, for 6 hours or so, including some running up and down stairs, with zero dramas. I would wear almost all the pouches identically, other then perhaps moving the 870 pouch to sit higher, if it was bearing more load, just to take advantage of the PALS/MOLLE attachments, but all in all, I was really happy with the belt. The webbing used for the buckles is sewn right into the body of the belt, wrapping the whole way around, and sits under the top. This made feeding the attaching straps of the pouches, both the Platatac-type integrated straps, and the Blackhawk STRIKE Speed Clips I use, a little tricky, but once in, they were rock solid. The overlap of the belt webbing and the middle row of channels makes it LOOK like its a staggered set of loops, but it isn't. Still, this adds to the stability and security of the belt! I might consider swapping out the ITW buckle for a Austrail Cobra buckle at some stage for climb-rating security, but otherwise this is an awesome addition to my load-out options.

Here's some obligatory tacticool shots of my load-out.

Review: Tactical Keychains - TiPiK

The maker of the WTF tool, the recently well publicised TiKeY, (not to mention the very cool Keychain Grenade ,  Brad of Tactical Keychains also put together a very bad-assed set of lock picks, made to fit his TiKey (or in this case, his equally cool TiKeY Mini).

This very well crafted set of titanium lock picks, includes a variety of pick types, most of which are very uniquely designed.  These are the TiPiKs.

As well as your more standard "hook" types, brad has designed several combination rakes, with both half-diamond and half-round elements.

He also included a twin-faced tool, for double sided cam-locks (as seen in a lot of small cash-boxes, glass display cases and teenage diaries, apparently).

Each of the picks ends in a "quick flip" head, with a 3/16" hole to mound neatly in most key-keepers.

As well as the seven picks in this set, there are also two tension wrenches; one with a standard key-hole hole, for secure mounting, and the other with an ingenious and very highly machined "clip-on" tension wrench, which due to its high tolerance construction, and the innate properties of titanium, simple clips in and out of the far pin of the MINI TiKeY key-keeper, held in place by the tensioning washers.

What this leaves you with is a very compact set of very highly engineered picks, including two tension wrenches, in a very innocuous but pleasant looking package. I had my TiKeY MINI anodized in "steampunk bronze and blue" because that's how I roll, and I've really enjoyed using the set, and having it sit in my pocket, ready to pull out and fiddle with my collection of practice locks when I've had some time to kill.

Brad and I agree that the size of the head of the tension wrench can make it tricky to place, but the convenience of a small set more than makes up for the need for more dexterity. Compare it to the Oscar Delta titanium Bogata set, and you'll see for yourself.

Sneak Peak: Paleo GoST - PAWS on ANTERRA and BAMANOS

I just received a package from Jörg of GoST Barefoots.

You'll remember that I have covered the most excellent ANTERRA and PRONATIV chainmaile running shoes previously, and in fact, even took them to do the Tough Mudder last year.

The folks at GoST haven't been resting on their laurels, all this time, and have come up with an exciting development, to help counter the one shortfall of their shoes. Slipping on polished surfaces. Their solution? PAWS. Little silicone pads merged with the soles of the shoes mimicking the paw-pads of cats and dogs. I can't wait to try them.

Second item in the package was a set of the BAMANOS gloves; fingerless gloves made of the same foot-saving material, for those of us who grab, clamber and scramble. They also feature the PAWS upgrade.

This is going to be great!

Review: Makershed -HPC lockpick set

One of my good friends got me started with LockSports, when he asked me casually "so,do you HAVE a set of lockpicks?" When I replied in the negative, he disappeared for a moment, came back and handed me a little package "now you do". That set was the Beginners Lockpick Set from the MakerShed.


I did some research, and it turns out that the MakerShed sources their picks from the well established LockSmith tool supply company HPC World. This is a great set, and really comfortable to work with. 

I thought I might go over the types of picks:
1) Hook
2) Snake Rake
3) Half Diamond
These first three are in Spring Steel, and are 0.022" thick. The handles are stainless steel.

4) Hook
5) Bogata Rake
6) Half Diamond
These three are all stainless steel, and are 0.020" thick. The difference between the two is that the stainless is very springy, and the spring steel is very stiff. (Go figure)

7) Tension Wrench
8) Tension Wrench with a twist
Tension tools are what give you the "twist" to bind the lock pins, and open the lock, once its set.

Here's this set up against the Ti Bogata set I got through Oscar Delta
This might give you an idea of the size difference achievable between a "SERE set", and a "working set". the broad handles of the MakerShed/HPC set made working locks a very comfortable task, with lots of purchase to maneuver the tools into delicate locks. I think I prefer the feel of the titanium tool though. The SERE feel of the Oscar Delta set lends to the idea I could secrete them on my person. If I really needed to ...

I'm really enjoying messing with locks that I am allowed to mess with, and building my skill sets for a time that may come when I need to open an unknown lock in an emergency.

Review: Boker-American Kami MidTech Colubris

I was very fortunate to be able to take part in the Boker-American Kami pass-around program, after responding to a call by D.J. Urbanovsky. This was for the production level Colubris MidTech, the smaller sibling of the American Kami Super Colubris, which I reviewed recently. D.J. teamed up with German knife-making company Boker to "upscale" his bespoke knives, and they came up with this as their cooperative piece.

Here you can see it above the Super Colubris, on my Hazard4 Launch Pad iPad sleeve

The Boker - American Kami MidTech features the same G10 scales, with the American Kami logo formed into the scales to act as a very functional gripping surface, along with the hollow bolts that were also a feature of the Super Colubris. As is the protruding butt-end of the full tang construction. Nothing like an impact tool to make your displeasure known.

My pass-around was individually numbered 0074, and arrived in a lovely display case from Boker, along with a note for the fellow who had the blade before me, apologizing for the broken belt clip and furniture. The loss of that clip was moderated by some lovely stickers they had included. I got straight into testing.

Without the belt loop, I rigged a cord lashing system, inspired by D.J's own YouTube safety and carry clips. I wanted an "outside the pants" carry, to have on hand as a utility knife as I worked around the house.

The blade itself is tremendous. Rather than the CPM S35VN
steel of the American Kami version, the Boker is from 440C, a very serviceable steel.  The difference between the MidTech and the Souper is almost entirely in the blade section, with the MidTech having a 10.8cm (4 1/4") edge, with the same modified Wharncliffe geometry, just shortened. It has an overall length of 22.5cm (8 7/8") and weighs in at 225g (8 oz). Two inches less blade than the Super Colubris, but still a capable and impressive tool.



I had a great time testing this blade, I ran it though all my usual knife tasks; I did kitchen things, I cut cords and rope, opened boxes, I even wrapped my families Giftmas presents with it. The stonewashed finish gave the blade a nice sheen, and stacked up nicely against the finish of the Super Colubris nicely. It cuts well, and the width of the blade was still suitable for medium delicacy tasks.



I also took the knife out into my back yard to give it a workout in a more stressful setting, namely hacking back the noxious vines that were invading my kids trampoline. You can see here the effect it had on those vines, with both slashing cuts, and pulling cuts being effective. I was able to maintain a very good positive grip on the blade, and it went right where I wanted, every time.

I also took it out hiking with my family, when we visited a scenic National Park, to give it a carry-test. Now, before anyone gets all concerned, no, there isn't anything to be afraid of in our National Parks here (not if you've liberally applied Vegemite to your heads, to ward off Drop Bears. I just wanted to go hiking and see how it felt. I fitted it to my Hill People Gear Runners bag and off we went. It wore like a treat. It's length molded nicely to my chest, and the weight was insignificant. I carried both Tactical Baby and Triceratops Girl up and over boulders and across creeks with it on me, and never a pinch or poke.

This is a really nice, very affordable addition to anyone fixed-blade collection. Super functional, sharp and rugged, with great geometry, hand-fitting and with a variety of carry-options.

Home Front: help Brad out! WTFs, TiKeY, TiPik sets!

You may remember the TiKeY that I recently covered (the article was picked up by Recoil Magazine, awesome, thanks guys) and the titanium WTF tool I covered a while back.

After being inundated with hits, and requests for product, it sounds like his lathe has up and died.
For those who don't know, as well as the WTF, TiKey sets and the TiPiK's (review to come this week, I hope), Brad is also the creator of the Bottle Grenade and has his fully funded TiPen project in the midst of production.

Brad needs your help need help! His lathe is going to cost 4-6k to fix, so he is doing a massdrop.

MassDrop link for the mini-TiKeY & TiPiK sets
https://www.massdrop.com/buy/tikey-tipik

also one for the WTF's
https://www.massdrop.com/buy/wrench-that-fits