Monday, June 24, 2013

Review: 5.11 Tactical - Stryke pants



When I visited the SSAA SHOT Expo, I paid a visit to the 5-11 Tactical stand, and met with their Australian and American reps, including the very knowledgeable founding father, Bil, who took me through the pants they were kind enough to gift to me, the 5.11 Stryke Pants.

Here in the OD green, with one of the 5-11 TDU belts I am fond of as well, I strike a pose with the ultimate urban test ... does the cargo pocket fit my iPad? Yes, yes it does.



From the get go, let me tell you that the material used in the Styke pants is really, really comfortable.

The secret to this, as well as the purpose developed propriety blend of poly/cotton ripstop, is that it  incorporates mechanically stretchy yarns, meaning the stretch and recovery of the fabric is achieved without the use of spandex, but rather by the way the threads are woven. 

It is a lighweight, breathable, and even with the ripstop checkering, extremely comfortable to wear. Soft and yet no hint of flimsiness. Treated with a silicone based water and stain guard, they help up pretty well from my work, parenting and prepping splatter for their first week of wear.

The cut of the pants was very generous, especially important if like me, you "go Commando" and find that tighter cuts pinch at the most inopportune times. These were a lot more comfortable than the 511Tactical Taclite Pro pants I have reviewed in past, great improvements! Even the waist band is well designed, but I'll get to that in more detail soon. 
 
On to the all important pockets!

You can see the main hands pocket, with their reinforced hockey-stick design (Bill tells me that was a specific request from Firefighters, to have somewhere to clip their radios. AN accessory pocket on the top of the thigh, the ubiquitous side-of-thigh cargo pocket, and just peaking from the side, the rear seat pockets.

What can you fit in them all? here, let me show you ...



I like my gear, and i like having it on-hand. However, being able to FIND it can be a real pain, unless some thought goes into pocket design, which in this case, it really has.

Similar to the Platatac Urban Dax, the cargo pockets sport internal compartment which are wide and deep enough to fit my bulky Snow Lizard SLXtreme iphone case as well as a Lazerbrite with little trouble. I can only suggest that the compartments would fit a 5.56 NATO magazine.

The hook-and-loop patches give a nice closure to the pocket, without being too invasive, and the styling of the pocket itself, with two baffles for expansion, we still quite discrete, an important aspect when wanting to blend in whilst still loading up.

Lets have a closer look at the front pockets.


As well as the twin, deep accessory pockets on the fronts of the thighs (seen here with the large HexBright FLEX filling it) but beside this, the main pockets have some interesting aspects that it worth covering in more depth.  As well as being nicely deep, and lined, but the best features are the hockey-stick shaped low profile pockets. 

This near-horizontal edge is perfect for clipping pens, folding knives (like the CRKT K.I.S.S. seen here) or as Bill told me, the pocket radio's that the firefighters who commissioned the pant design in the first place asked for. 

The belt clip of the knife (or pen, or radio) sits on a reinforced patch of material, still in the pocket, out of the way but easily accessible. For items with longer clips, the people at 5.11 had the forethought to put an opening in the top of the cargo pocket, but you could also feed cables up through it I suspect.

Two other interesting (and very thoughtful) features can be seen here as well. On the left-side belt loop, an opening can be seen, which is the space the self-adjusting tunnel waistband feed into. Similar to that seen in the Taclite-Pro pants, this allows the pants to stretch when you bend at the hips, without biting, or sagging, once you are upright again.

The second, innovative addition, is on the right belt loop, which features a vertical loop in addition to the regular horizontal one. Perfect for clipping ID or a badge, and in my case, a spot to clip my multi-tool retention lanyard.




 Then there are the knees. 

As well as pretty standard double-cover knees, to help with wear and tear, and we all know what that is like, 5.11 have kept this in mind when putting in the seams for these. Low-profile and discreet as well as discrete, the addition of a second layer adds little bulk, but the real trick to these in on the inside!

On the inside edge of the knee seam a small pocket opens up to allow the insertion of a kneepad. I put my Blackhawk! kneepad up here to show you what it looks like. The pocket is certainly big enough, but takes some delicate handling to fit the bigger pads in.

All together these are some really excellent pants, I was thrilled to receive them, and their comfort was a really impressive collection of features. 
 

My only disappointment was the back pockets, being a standard hook-and-loop straight topped pocket, unlike the signature 5.11 slash and retention strapped back pockets of the TacLite Pro's.

 That said, there was even an extra unlisted feature that Bill pointed out to me (always great to have the people behind the product there to show them off) In the bottom hem, eyelets have been sewn in place in case the wearer wanted to blouse them! Little things that show they go the extra distance with design.

I also love the way 5.11 got their name ...

“5.11” is a rock climbing difficulty level as listed in the Yosemite Decimal System. With skill levels ranging from 5.0 (easy) to 5.10 (difficult), 5.11 is even more grueling. 5.11 is officially defined as, “After thorough inspection, you conclude this move is obviously impossible; however, occasionally someone actually accomplishes it.” 




Tuesday, June 18, 2013

Kickstarter projects on the go

 I have several Kickstarter projects on the go that I thought had some relavence to the blog, and Equipedness ....

The first two, I have pulled great slabs of text from their projects, as well as pictures. I think both are very interesting, and useful.



http://www.kickstarter.com/projects/mikebond/ti2-sentinel-x-aluminum-cache
18 days to go

" Sentinel X -- “form follows function” philosophy with key features: 

Water Tight -- The “X” is tested water tight and features Twin o-rings for redundancy.  The o-rings are made from food grade silicone and able to withstand temperatures required to boil water.
Strength -- The “X” is strength optimized using CAD parasolid modeling resulting in a unique ribbed/skeletonized design.  We are using aircraft grade 6061-T6 aluminum in its construction.
Lightweight -- At just 400 grams the “X” offers a minimal weight footprint.  An excellent way to safe hold 18+ cubic inches (11 fluid ounces) of critical gear.
Internal dimensions  2" diameter and 6" length (51mm x 153mm)
External dimensions 2.5" diameter and 8" length (63mm x 204mm)

Finishes -- The Sentinel X is offered in 2 versions of Type 3, hard anodized coating.  The Sentinel X1 is Type 3 Class 1 hard anodized and is food grade.  Due to the anodizing process it comes in a greyish-bronze color and your choice of regular or satin finish (check out comparison photo below).  This anodizing process is typically used for military applications where durability is critical.  Also, this coating is common on aluminum cookware such as pots and frying pans offering excellent flame resistance.  The Sentinel X2 is Type 3, Class 2, NON food grade and available in Black, Olive Drab and Brown satin finish only.  Both the X1 and X2 exhibit the same durability properties."

Secure carry of delicate items? cooking container? survival cache? yes please! I am already pondering what I can fill mine with.



http://www.kickstarter.com/projects/publiclab/infragram-the-infrared-photography-project
18 days to go

Infragram is a simple, affordable near-infrared camera
"Produced by the Public Laboratory community in a series of collaborative experiments over the last few years. We originally developed this technology to monitor wetlands damages in the wake of the BP oil spill, but its simplicity of use and easy-to-modify open-source hardware & software makes it a useful tool for home gardeners, hikers, makers, farmers, amateur scientists, teachers, artists, and anyone curious about the secret lives of plants.

Photosynthesizing plants absorb most visible light (less green than red and blue, which is why they're green to our eyes!) but reflect near-infrared. When you take a picture with the Infragram, you get two separate images -- infrared and regular light -- and a false-color composite that shows you where there are big differences. Bright spots in the composite means lots of photosynthesis!

DIY Filter Pack: This is just a piece of "infrablue" filter which you can use to turn your webcam or cheap point-and-shoot into an infrared camera. The filter allows you to take an infrared photo in the "red" channel of your camera, and a visible image in the "blue" channel. You'll also receive a white balance card and instructions on how install your filter -- it's pretty easy!
Infragram Webcam: This inexpensive but flexible reward is perfect for plugging directly into your laptop or integrating into other projects. It's also ideal for your Raspberry Pi, if you want to take it outdoors, do timelapse photography, or write scripts to control your camera. It ships as a bare circuit board with a USB cable - like an Arduino.
Infragram Point & Shoot: Just want a camera? This is a straightforward, if basic, point-and-shoot: you can simply take photos as you normally would, then upload them to our free and open-source web app to quickly and easily get a variety of composite images and analyses. To accomplish this, we're simply modifying existing cameras which we'll buy in bulk, using the "infrablue" filter. This isn't an SLR or even a particularly fully featured camera -- it likely won't have an LCD screen and may be "rebranded" with a Public Lab sticker -- but it's the new filter we've put inside which counts.
The final configuration will depend on the # of backers, but it will likely use AAA batteries and a micro SD card. We're promising a minimum of 2 megapixel resolution, but should be able to do much better, especially if we get a lot of backers. Basically, the more money we raise, the better these cameras will get! "

What a cool idea, process animal tracks and runs through undergrowth, check crop health, locate camouflage .... I already have a balloon system ready to hoist it, but would work on a kite, or a quad-rotor drone too .... Pixels from above!
Lastly....


Cole Bar Hammer
I already covered this as a wish-lust item, but the guys behind it have been constantly improving it, and are very close to adding a metric ruler to the design.


Look it up, and back them, it will be worth it!

Monday, June 17, 2013

Review: Michael J Fechner - Utility Blade

 I attended the Australian Knifemaker Guild show a little while ago, and whilst there I was delighted to see a bunch of really nice pieces, but I only saw one that I felt I need to add to my collection.

Knife and sword maker Michael J Flechner had an array of fine steel on display, and this is the Utility Blade.

This 20cm (21.5") long blade is 4cm (1.5") wide, 6mm (0.25") thick. Made from spring steel, the blade comes in at around 350g (12.4oz).

The blade geometry is really nice. Tapering down from the spine on one side to a flat grind, the primary edge is also a flat grind. Very simple to maintain.

The chisel point on the tip and the leading edge follow the same simple, elegant geometry, making this a very functional and effective tool. The black powder coat dramatically reduces glade, and offers corrosion resistance.


I gave it a pretty good work out; chiseling, chopping, prying, and was very happy with both the edge, and its handling.


I cord-wrapped the handle, using the array of holes in the skeletonised handle such that I had an adjustable retention lanyard.

I really liked the forwards swept blade, especially when doing hard chopping, because it kept my hand away from the materials and impact points.


The built in sweep from handle to blade lent itself to both a strong positive grip, but also  allowed me to place my thumb on the spine, as needed, to control and guide, without the worry of my hand sliding up the throat into the blade whilst doing some pretty vigorous chopping.

This blade comes with a kydex and nylon webbing sheath and would be a very sturdy addition to anyone's outdoors survival kit, in my opinion.

I found that after cord-wrapping, the nylon retention strap didn't quire wrap around the handle, so I will need to add a new press-stud to make it sit snugly and securely.












Here are a couple of shots of me chopping some hard-wood branches I had in my wood-pile.
The knife handled really well in this chopping, staying solidly placed in my hand throughout, and with very little shock traveling to my arm at each blow.



















The thick spine lends itself well to battoning, here with another hardwood branch.




















Lastly, a clip of the whole chopping and battoning.
Don't mind the sounds of my girls in the background playing on the trampoline., they really were having fun, honest.

Friday, June 14, 2013

Review: CE Jay Engineering - Phoenix Jr IR Beacon

As I posted recently, I had a surprise delivery arrive, and wanted to let you know all about it. A "restricted export" item, I feel very privileged to be able to play with it, hard to get out of the US.

This is the Phoenix Jr IR strobe beacon

This 30x20x20mm (1.2x0.75x0.75") block of acrylic weighs only 8.5g (0.3oz) and has a 9v battery attachment point on the bottom, slightly covered by a lip. Inside the acrylic you can see the three IR LEDs and the simple controlling circuit board. Simplicity in design! 

The 9V battery will provide 200 hours of strobing, according to CE Jay Engineering, and even after draining the battery of its primary charge, they suggest that giving it a2-3 hour rest can eek out a short while of extra strobing, in a pinch. The flash rate of 20 milliseconds every 1.3 seconds was specifically chosen to prevent confusion with small arms fire, which is a VERY good thing, to my thinking. 

The clear case, and design allows for a 360 degree viewing angle, from around the beacon, and a 240 degree viewing angle from the vertical( due to the battery, obviously). 

Whilst not "waterproof" the beacon is purported to function whilst immersed until the contacts fail due to electrolytic corrosion. That's pretty impressive. No switches, no moving parts, just the 9v connectors. Plug in a batter, and it's on. Pull battery off, and it is off. 

I tested it with my Yukon 3x42 NVG, placing the beacon on my car and walking down the street until I lost line of sight, and I have no doubts that this beacon would be visible for hundreds of meters more. To get a decent photo, I took it inside, and with my iPhone, took a couple of "down the relief" shots.

Unlike some IR LEDs, those used in the Phoenix Jr are totally invisible to the human eye, with no tell-tale red pulse. This means for covert use, either in static positioning, or secreted on your person, and even through clothes, you can signal to NVG equipped observers. 

I am throughly impressed with this piece, and am going to see a out placing an order for the non-export restricted waterproof carry case for it. I think this kind of item that would be ideal for assisting Search And Rescue teams finding me in the event that I have a misadventure. That or IFF when I am out laser tagging. 





Thursday, June 13, 2013

Review: Get Home Bag - Bug Out Bag

Some friends of mine asked me recently for recommendations for Bug-Out-Bags, after watching the NatGeo "Doomsday Preppers" show, and The Colony.

I don't have a "Bug-Out-Bag", per se,  but I do have two "Get Home Bags". One in my car, and one is my every-day pack. 


I've covered both before, as Items, and shown off what I keep in them from time to time, but as a unit, I thought it might be worthwhile laying it all out.

My primary, EDC and "get home bag" is the Platatac Bullock Echo, to which I've added a couple of extra pouches and loaded up a fair bit. This is the bag I have with me everywhere I go, and I still manage to carry my iPad, days food and whatever else I need day by day in it. Great pack. It's a reasonable load that I carry, as you'll see, but I can run, climb, crawl, jump and probably swim with this all on me. I get some funny looks sometimes, but I'm used to that. 



1) waterproof poncho, OD / first aid kit
2) set of metric Alan keys on a split ring
7) cord
12) ZuluNulonGear CAOS admin pouch with small adjustable wrench, LED plyer multitool, Buck Tools Multitool, dexim BluePack 1200mAh ( 5V-500mAh) USB iPhone battery, UV laser pointer, kumquat carbon fiber credit card bottle opener, sharpie.
14) microfiber towel
16) Platatac Half Med pack with elastic bandage, forceps, non-latex gloves, cylume sticks, band-aids, bandages
18) Sea To Summit Alpha cutlery and chopsticks
20) Platatac HeadOver head sock 
23) alcohol based hand sanitizer
26) cable ties
27) toiletries bag with toothpaste, soap, safety razor, floss
28) essential oil deodorant bag
29) Spare glasses in hard case
30) nut and honey snacks
32) whistle

I also keep this, in the car. I consider this my "broken down in the side of the road" kit, but also doubles as my camping/kicking adventure bag. I have a full first aid bag in the car, and a fairly complete tool bag as well.

As I've covered before,  the Kathmandu Hip Bag is a very dependable, and feature rich, wearable pack.

With my FUBAR and CRKT Stiff Kiss it is quite the formidable survival pack.

Here's what I keep in it....

33) heavy waterproof poncho, Woodland camo
34) gaffer tape
35) camping propane gas
37) enamel mug
38) bug spray
39) sweetened condensed milk in a tube
42) high-test marlin-fishing line
43) Petzl "figure 8" device
44) Kong locking carabiners
45) 5mm dynamic rope

46) matches
47) fishing hooks and sinkers in-a-tin
49) hand carved snare with braided line
50) Miltons water purifier tablets
51) nails
53) bandages
54) tea bags
55) whistle and flint
56) powdered chocolate.



I can wear both the Bullock Echo and the Kathmandu bum-bag at the same time, between the two I have a lot of survival kit in fairly small, wearable packages. Given that I don't spend a lot of time in the distant wilderness, but more urban sprawl, and country roadsides I think that in the event of a disaster in my region, I would be able to manage with this loadout for quite enough time to get home, or away, and overcome most any obstacle that I might come across.

For me the idea of a "bug-out-bag" is more of a "never coming back" bag, which would be a little more substantial, and aggressive, where these two are more a "get out of trouble" set. I can help myself, and others push through rough times with what I carry at all times, and have with me in my car...

After the Black Saturday fires of 2009 and the semi-regular flooding we are getting, I want to be ready, Equipped!




[edit] I've been asked if i would make Bug-Out-Bags for sale ... anyone interested?

Thursday, June 6, 2013

Review: Laser Genetics - ND-3x50

After my visit to the SHOT Expo, I thought it was time to roll out one of my big lights. 

I had seen these whilst browsing the Canis Latrans Sports website (they do "replica" gear, where my Ops-Core style helmet came from ...) The idea of a laser pumped light sounded really cool, but I had no idea what to expect. I took the plunge and ordered one.

It turned out to be much bigger than i had expected (I did choose the bigger of the three versions available.) Here it is, the Laser Genetics ND3x50 laser designator (or a clone of the same)


The fist thing I need to tell you is that it IS large. The objective lens end is 60mm (2.35”) in diameter, and the barrel, whilst the standard 1" ring size gives the unit a 240mm (9.45”) over all length. It's a big light at 380g (13.5oz). However, it gives BIG results.

Powered by two CR123A batteries, the light has a maximum output of 50mW, which is purported to give a visible light at up to 4.8km (3 miles). It manages this by producing light at 532nm (green), apparently the easiest light for the human eye to see. 

So it's a huge laser pointer, so what?  


Built into the base of the objective end is a Rotary Optical Collimator, which allows you to dial in the focus of the beam, from 50mm to 320mm at 300mm from the end of the objective. That then spreads out to about 2m at 11m (see pics below), or , when dialed in tight, leaves a pretty much 50mm spot for as far as you care to through, up to about 450m (500yrd) effective range.

By "effective range" I think they mean when mounted on top of a scope, which, as it happens, they include mounts for with a "weaver style ring", a 1" scope mount (essentially a windage and elevation adjustable double sided mount, a tripod mount, as well as a pressure switch accessory. Lots of tactical options there. Just remember, this is a BRIGHT light, and you can see the beam in the night air, leading right back to the source. 

Tracers work both ways.

That said, the all aluminium body, with its anodised finish, o-ring seals and nitrogen charged lens cavity make for a pretty solid piece. One thing I noted were some imperfections. There is dust on the inside of the objective lens, and when dialed to wide-beam, there is a distinct "gibbous moon" effect where the lens is not quite right. This may be because this is a "replica" rather than a stringently QC'd piece.


Here are a couple of shots of me testing it indoors, from room-sweeping, to tight spot. In its room-sweeping end (or any of the wide angles, it also casts a secondary diameter, giving you a pretty good field of illumination at the "up close" distances, great for trails and sweeps.

I also took it out to the valley near Puffing Billy scenic railway, and had a bit of a play with it.


This is a really cool light, and I really enjoy taking it out and beaming it around. It is very powerful though, and I am always careful to steer clear of aircraft, delicate eyeballs and Sith Lords.

Tuesday, June 4, 2013

Review: Civilian Labs - Hazard4 - Loader RG Harness

Ages ago I covered an essential piece of my EDC, my custom made EDC holster harness. This faithful piece has been with me for years, and has reached the end of its life. I had contacted Darrin Talbott of Extreme Gear Labs to commission him to build me something, but alas, he's just far too busy to make a wacky one-off custom job for a blogger.

Check out his Facebook to see the cool Operator gear he makes. That news sent me looking for an alternative.

I was lucky enough to spy the Jerking The Trigger post on the Hazard4 Poncho and following the links, saw that Hazard4 offered a modular holster rig! Tay from HorNest did me a solid, and shipped some over.

Hazard4 are the "Tactical" arm of Civilian Lab makers of fine modular kit. The link I followed brought me to these, this is the Loader rig
with the optional extra anatomic harness.

What it is is two sets of the Escape Rig, one for each side. The two halves are identical, so I'll cover them as just the single unit.



Here are the two Escape halves, with the Anatomic shoulder harness, and another piece at the bottom to hold them together for stability.

The pouches are made of Dobby Nylon and have "PU X 2" treatment, and measure 12.5 x18 x4 cm
(~5" x7" x1.5") externally. The main panel is faced with two hook and loop closing pockets, one that fits my Surefire 6PX like a glove, and the other which his more squat. Both of these pockets are elastic sided, and open cornered. Bear this in mind when looking to fill them.

In this shot you can see some of the rotating buckles  that are fitted to each corner, each backed with a tab of the same padded material that backs the pouch for wearer comfort.  This is some very thoughtful and innovative design. no more buckle-pinch!

You can also see one of the tri-glide buckles that sit on the middle of each of the four sides. These are for accessory loop and strapping, and I'll get into that a bit later.

The 2013 version of this pouch has all black labeling and non-reflective zippers and fittings, for even lower profile wear.



The "back pocket" of the pouch is an open slot, wide enough for my receipt and card filled wallet, and is mesh-sided to cut weight and improve breathability and drainage. (Luckily Australian money is plastic, in case I ever take a dunk...) You can see another of those elastic-looped tri-glides here, to which I have dummy-corded my wallet. No more dropping it into the toilet, off piers, or leaving it on cafe counters for me!

My iPhone sits in the corresponding other side.

What you cant see is the wide swathe of black loop field, for affixing a hook-backed holster, like the Stick-Up.

You can also see the double zipper here of the inner pocket. Very useful!

Inside that inner pocket, you see where some real thought has gone into making these pouches. As well as the tough nylon outer, they are lined with quilted micro-suede

They also feature a series of webbing and elastic channels to fit your tools and needful gear, I have my SAR Dead Ringer comb and CRKT K.I.S.S. folder in mine on this side. Passports, and paperwork on the other side.

The pocket opens all the way to the bottom, but, like a good admin pouch, it has webbing retainers, keeping it from flopping flat, but catching it at about 45o so your pens, USB sticks, or whatever don't tumble off into the wide blue yonder.

The back pocket has a press stud on webbing closure, with two sizing options, which is great. I tend to clip my wallet in with the big, and my phone in with the snugger length.



The back of the pouch features a belt loop,wide enough for all the belt I tried it on ( both my 5-11 TDU belts, the 215Gear Ultimate Riggers belt, and the PM Leather Hobble Belt.

It also features a press-stud flap option, for quick-release needs.

Why even have a belt loop? Modularity!

 Those corner buckles attach to the included cross-straps, which are two fully adjustable nylon webbing straps, with a press-stud in the middle, to connect the two.

One of the coolest things about this whole system is that it can be worn so many ways.

All of the straps will "double-back" through the buckles for a really secure fit.and the tri-glide attachment points allow you to rig any number of stability or alternative attachment options. The rotating corner clasps mean that the straps stay flat no matter what configuration you wear them in, and they stay upright as you move, depending on how you wear it.

The included cross-straps are a little more versatile than the Anatomic straps, but not nearly as comfortable. The pouches can be worn under the arms, holster style, singly or in pairs, horizontally or vertically, but also on the hips on a sling, as a backpack, slung cross-ways like a bandoleer, on the thigh as a drop-leg or on the front of the chest or even as a shoulder bag.

I used one of the cross-straps to act as a kidney-height stabiliser,  having found that on their own, the pouches slid forwards when i bent over without them.
 Here's the package insert, showing some of the carry options.....


One last thing. Each of the pouches comes with a "Shuttle Pouch" which is made from the same Dobby Nylon, and lined again in the quilted micro-suede with mesh pockets along with nylon strapping. The Shuttle pouch is designed to fit into the "Back pocket" of the main pouch,and be clipped in. It features waterproof zippers and a set of webbing eyelets on each of the four back corners for dummy-cording (mmm, dummy-cord: looks silly, keeps your gear on you...)


This was a seriously feature and function filled set of kit.

I've been wearing it now for a few weeks, getting the configuration and fit right and I must say, it has been one of my better EDC investments for some time.  I wear it every day, almost all day in some cases.

I don't feel "dressed" with out it, and it really is my go-to item when it's time to run out the door; be it emergency, fire, flood or groceries.

Related Posts Plugin for WordPress, Blogger...