Review: Platatac - Bush Dax pants

I was very sorry to hear that some of my favorite pants, the Platatac Urban Dax (wearing them right now, in fact) didn't make it out of prototyping, and certainly not to market.

There are all kinds of business reasons for this kind of thing to happen, but in the end, I am just grateful that I got to grab a pair whilst they were available.  I saw some advertised on the Platatac eBay shop but not in my size,and I was worried that I might never get another pair like them.

I'd seen some of the Platatac TacDax in the "news" and when I pestered the guys about bringing back the Urban Dax, or if they had any laying about in the warehouse, they hooked me up with a set of their in-between line, the Bush Dax.

"Dax" (or dacks), for those of you who aren't aware are an Aussie colloquialism for pants, especially track suit pants. Rhyming slang ... I've never really gotten it, but, there you go.

The Bush Dax follow the same generous lines as the Urban Dax, with some interesting variations and different features.

First up, the material is slightly different, perhaps a combination of treatment and weight of fabric, but felt more like cotton duck than the Urban Dax. With the same generous crotch, with both reinforced seat and crotch, I have been perfectly confident squatting, throwing my leg over walls and generally scrambling about in them. I've torn the crotch out of so many lesser pants I cant begin to state how important that is to me.

Next up are the array of pockets available.

Like the Urban Dax, these have a variety of ambidextrous pockets, ten in total: Regular "jeans-style" pockets right where you expect them , and are nicely placed, and a good depth. I'm so glad I have pants with pockets and am allowed to use them ... The jeans-pockets don't have any internal pockets.

 Same goes for the backside pockets, hook-and-loop secured flaps cover up essentially a standard jeans-seat pocket.

The front and sides are where the magic starts. There are two small pockets on the front of each quad. These are billowed, and also feature hook-and-loop closures, and easily fit my iPhone in its Strike Industries BattleCase with quick-pull ring.

The sides of the ubiquitous cargo-pocket feature a mesh-lined side pocket, with a zipper closure, which in turn are deep enough to easily store my hefty HexBright Flex flashlight and keep it in place for when i need it, especially if I'm sitting.

You can also see that I have connected my lanyard to one of the integral accessory loops that are found at each of the 60mm belt loops, offering a solid place to anchor your gear without clogging up your belt and belt loops.

As with all the Platatac gear, and clothes, these are seriously well put together, double stitched on all the major load-bearing seams, and bartacked at the joints.



 Here is the most important feature, to my mind, and my principle test. The main cargo-pocket, with its twin spot hook-and-loop closures, and billowed sides, for high capacity storage, with happily fit my iPad.

Silly you might think, or at the best, totally POG of me, but given my day-to-day activity, having somewhere I can stash my iPad is quite a benefit.  It also gives a nice standard measure. So, with my excuses aside, I can run, climb, crawl around under things and then whip out my iPad to access whatever data or app i need ... great pocket. Again, it lacks any of the internal compartments that the Urban Dax had, but that simplicity probably saved the design from the cutting-room floor.

I have a lot of EDC gear, and the spacious pockets of the Bush Dax meant that I didn't have to worry about jamming it all into ta couple of pockets, but distribute it into workable zones.

The position and placement of the pockets was really comfortable, something is is occasionally missed (or perhaps, given my preying mantis proportions, I just don't fit where makes expect pockets to sit), but with the Bush Dax, I had nothing to complain about.

One thing I didn't may much attention to was the elastic drawstring blousing available in the ankles. (which are the saem as found in the ADF DPCU uniform, apparently). Good for keeping crap out of your legs, but for my needs, a bit too much, so i left them slack, and able to drape over my boots, to keep me looking a little bit civilized ..

Lastly, a really cool feature that I haven't had a lot of success with, are the knees.





Each knee has a hook-and-loop closing pouch at the base of the knee, which opens up to allow a knee-pad to be inserted, with a little effort, and placed one of my smaller pads in the pouch (I left one out to give an idea of scale, these are Team Wendy KEPS Sleak elbow pads.

I found that the opening was very narrow, even for a narrow pad like an elbow pad.
Perhaps there is a better way of doing it?

Anyone?

So, that aside, these are some great pants, not heavy, or stiff, but neither are they lightweight, and offered me versatility in my wardrobe, without sacrificing utility or hardiness.

Review: Benchmade - SOCP CQB dagger

So, in my recent delivery from Tay at HorNest Singapore, I finally laid my paws on this piece that I first saw on 2Cent Tactical (or at least, the Spartan Arms CQB version) but primarily from the Soldier Systems write up of this one specifically, the Benchmade SOCP Close Quarter Battle dagger.   


Being a dagger, this is a restricted item in Victoria, where I live, but I hold an exemption of the Weapons Control Act as a bona fide collector.

I had held one in the past, when in the Platatac retail shop. Now I have one.

 This is a piece of delicate, singing steel. This is no kitchen knife. No camp knife for chopping branches and making kindling.  This is for putting the pain into people.

Both the dagger and the red skeletonized trainer blade are made of 440C blade steel. The dagger weighs 62.37g (2.20oz ) and the trainer 65.49g (2.31oz), with overall lengths of 18.42cm (7.25") and 17.30cm (6.81") and blade lengths of 8.18cm (3.22") and 7.06cm (2.78") respectively.


Worth noting that on the dagger, the actual sharp edge only accounts for a little over a third of that length but comes to a wickedly sharp point.

10ga phlebotomy needle sharp.

The tail end features a large ring, with crenelations cut into its cap for a very positive grip and the narrow spine is shaped to fit a tight grip, with further crenelations cut into the middle "knuckle gap"for added gripping power.



The trainer and the dagger have the exact same layout, and this makes a very nice and safe transition, over more traditional "training" blades. The safety-red trainer looks, feels and acts almost exactly the same as its more deadly sibling, allowing you to train like you fight, and fight like you train.

Just what is it for then? This blade was designed to be an on-hand backup for a firearm in close quarters fighting.


The narrow spine and ring-grip allows the wielder to maintain a grip on a firearm, be it a pistol or longarm, and have it on-hand to fend off attackers in grappling distance, without switching hands.


One can quite comfortably be carried whilst you are using your hands for other things (just TRY to take my lemonade away).

The idea behind this blade is that it is not a "fighting knife", but a "last-ditch" weapon to buy yourself time in a very dire situation. It is light, fast and very very good at putting holes in things that need ventilating in a "never touch me again" situation.

Being able to hold a knife and still hang operate another tool, or object simply gives you a time advantage over someone who needs to drop an item and draw a knife.

Part of the key to this is the design of the ring grip and how the sheath works. The injection molded sheath with retention clip and lanyard holes fits neatly into a MOLLE channel, taking up three rows, and is held snugly in place by the clip and the flared end of the sheath.

The placement of the lip pf the sheath and the ring means that you can hook the tip of a finger through it, yank it up and out and into a usable grip from just slapping your palm against it, and making a fist whilst drawing back. Its an unusual maneuver, and I am particularly glad that I got the trainer, because I can see myself giving my gear or self an impromptu shave practicing this.

The sheath is available in olive drab or black, and it really does blend in, as well as only adding 28.35g (1oz) to your load. This is a stealth piece if i ever saw one.

A beautiful, functional, dangerously stealthy piece. I really like it, and am very pleased to have added it to my collection, and in the event of the breakdown in society, I'll be very happy to have it in my arsenal.

Review: CRKT - Eat'N Tool

I really love my pocket tools, and I really love it when they are multifunction. I also love eating, and am really quite fond of proportional violence. I have several pieces of eat-wear in my collection already, the Alpha Set from Sea to Summit being one example, and my Snowgum BattleSpork (same article) being another. So when I felt the need to splurge on a bit of eating tech, I picked some of these up. This is the CRKT Eat'N Tool. I like CRKT, they have elegant and functional tools, like my STIFF KISS camping/car knife and Folding KISS EDC knife

Once again, CKRT have come up with the goods.


The Eat'N Tool is primarily a spork, with a nice dish (although probably not what you'd always want to eat your soup with) and four little tines, very elegantly worked into the tip. Made of
3CR13 steel and available in a bead-blast finish (9100C), or with a food grade black non-stick coating (9100KC) like the once I have here. 

The tool's scalloped sides and center hole give a good comfortable grip, and enough purchase to be used as an improvised mood-adjustment tool (like the Nukotool Skully)

A bottle opener is always a welcome addition! 
 On the back side, three metric wrench reliefs (10 mm, 8 mm, 6 mm) give you some on hand adjustment options of another kind, again aiding to reduce the overall weight down to a mere 43g (1.5 oz). A flathead screw driver adds another on-the-spot fix-it tool to the package, as well as

There is also a lanyard hole, for even more dummy-cording goodness. 




The Eat'N Tool is friendly in the pocket, I haven't gouged myself on it yet, nor did it gouge my hip pocket (proverbially, as I don't carry my wallet back there).


I'm thinking of giving them away to friends for Giftmas...

Click here to go to Think Geek to get one ...

Review: Jill Lite - Constel LED micro lantern

As a part of my care package, this very cool item was waiting for me having arrived from HorNest in Singapore. This is the Jill Lite Constel which is a pocket sized, LED powered lantern. 

The idea of a lantern that can fit in my pocket is pretty appealing, whilst there are a lot of options for using a flashlight to light up a room, but they are not purpose built. Even the Lazerbrite end caps with the glow-domes are accessories, and whilst awesome, are part of a bigger system.

These Type II / III anodized AL6061 T6 aircraft grade aluminium bodied lights are roughly bullet shaped, with a plastic dome light diffuser and a two part metal body. The light source is a 3W white LED, situated in the center of the barrel, and is wired in to use the whole of the unit as a heat sink. O-rings at the dome and end-cap provide a water seal that is rated for approximately 10 meters submersion, which is a lot, when you think about it. Deeper than a number of my "waterproof" watches over the years can go.
  
 A lithium CR123A  battery powers the unit, and provides between 30-40 hours and is activated by rotating the end cap. 

The end cap itself has some cool features, some attention to detail that I really appreciate. The split ring held in the middle is captivated by a raises island machined right out of the base, but not so much as to make it a protection risk when standing the lamp up on its own, which it does on two wide crenelations on the bezel. 

Those crenelations have slots cut into them, for lanyard strapping, and greatly resemble the handles on a beer keg. 
 
Over all the lantern is a miniscule 55mm long, and 22mm in diameter and has a really solid, rugged feel. I wouldn't be throwing it -at- things, in case the plastic end cap broke, but I certainly feel it could not only be lobbed a fair way, but would withstand a bunch of dropping, standing and "lost in the bottom of your pack" time. 

Then there is the light. For a 3W LED, encased in a translucent dome, this little lantern kicks out a whole bunch of light. Here it is sitting on a Dead Person Jar , on my bed, lights on, and off. Certainly enough output to not only navigate, but also to do pretty much anything but paint well. 
 
 I can see this lantern finding an excellent home in my camping kit, as it would be perfect for illuminating the inside of a tent, or the cook-fire, dining table, not to mention for late-night trips to answer natures call.


It is small enough, tough enough and powerful enough, that I want to add it to my EDC, and have it on hand, just in case, even with my already fearsome array of illumination ...

Wish-Lust: ITS Skeletonised Bottle Holder

A while back ITS Tactical (of which I am a subscribed "Crew Leader", always glad to support a forward thinking group like these folks) posted their trial launch of a new product that really caught my eye. In a recent newsletter and subsequent posts they have announced that their ITS skeletonized bottle holder is now on general sale! I'm hoping that my contacts at HorNest will get some in...

Here's what ITS have to say about it:

• Lightweight Skeletonized Construction Weighs 2.7 Ounces!
• Double Layered Webbing with Strategically Reinforced HDPE
• Slipnot Textured Pull-Tab for Non-Slip Grip
• Adjustable 1/8" Shock Cord for Multiple Bottle Neck Sizes
• Three Levels of Height Adjustment for Multiple Container Sizes
• True One-Handed Container Deployment
• MOLLE/PALS Attachment Also Adaptable to Various Belt Sizes
• Color Matched Webbing and Loop
• Available in MultiCam, Coyote Brown and Black
• Hand Made in the USA using American Materials and Labor

MOLLE and belt compatable, adjustable to fit a variety of bottle sizes and shapes, with three points of adjustable shock-cord attachment, the ability to sling your bottle upside-down and bombproof construction. Whats not to like?


So, another collaboration between ITS Tactical and Zulu Nylon Gear, much like their also very cool (and wish-lustful) ETA Trauma kit. I have already commented on how much I like and am pleased with the Zulu Nylon Gear CAOS Admin pouch and the really cool MOLLE car visor sock, but this bottle bolder really appeals as well. I've been very happy with my Platatac FUP pouch, to hold my 1L SIGG bottle, but this is a purpose built piece, and is totally wish-lustable.

Review: Smith&Wesson - Tanto Neck Knife

This pretty piece of steel was un cadeau for one of my partners, given by the main organiser of an event she was helping to run last week. She was good enough to loan it to me to play with for the blog. This is the Smith&Wesson - Tanto Neck Knife

As far as "thanks for helping out" gifts go, I must say, this is one of the prettier I've seen.

The skeltonised knine is full-tang constructed, with zytel scale sidings and a kydex sheath . The blade locks into the sheath with a friction clasp, and is both light at 100g all up, and dainty in the hand, at 18cm (7") over all, with an 8cm (3 1/8") blade.

Light and lively it suited the  spirit of the gift well, as a neck-knife to affix to the ID lanyards worn at organisers and officials this particular event, for safety needs as they might arise. 

The kydex sheath has two lanyard holes, for cord or chain to loop through, to wear in its "neck knife" configuration, as well as a drainage hole at the knife tip end. It also features a built in whistle, which I can tell you is VERY  shrill. It is placed such that you can use the whistle, AND draw the knife if that fails to have the desired effect. 

The blade is 2.5mm thick, and according to the internet has a Rockwell Hardness of57Hrc. That's pretty good for a 440 steel.

The blade itself is also skeltonised, with two cutouts, further reducing wight around your neck.

The thumb and index finger notches are aggressively crenelated grips, but not so much as to chew up finger and thumb. Without any guard, these crenelations act to lock your hand in tight and off the edge.

The edge is interesting as well, with a "tanto" tip, the main line of the blade is in face concave, with a subtle but significant bowing. This is pretty, but makes me wonder about keeping the blade sharp. I use  DMT diamond sharpening stones and I am unsure if i could get a good mating of stone to steel.

The factory may have had the same problem, as the blade ships only "supermarket-sharp", so I'm a little disappointed by this, especially on a chisel-ground blade. Hopefully I can do some good work with this, maybe a stropping will fix it.

Review: CountyComm Breacher Bar sheath

Here is another part of my recent haul of gear from CountyComm, a kydex sheath also made by CountyComm to fit their very rugged Breacher Bar. I have been so happy with my Breacher that I wanted to get this piece to compliment it. Up until this point, I have mounted mine on a PALS/MOLLE panel on the front of my MAC plate carrier.

The opportunity to have  a purpose built sheath was too good to miss, and these hand-made kydex sheathes by EOD/ CountyComm, which come equipped with not only a tight friction lock of the Breacher Bar, but also offers several different attachment options. The sheath is designed to fit the Blade Tech line of TekLoK systems as well as being able to accept lacing and other means of attachment. The two bottom holes, the six along the sides, two at the top and three through the middle give ample options to lash with paracord, or fit a variety of other attachment options.

I have attached a short MALICE clip to mine, which will enable me to mount mine to the MOLLE of both my chest rig, and also to any of the bags of belts that I may have in play at any given time.

The fitting hardware that came with the EOD sheath consisted of four screws and threaded eyelets as well as a spacer ring, deep enough to match up against the depth of the sheath itself from the edge holes.
A drainage hole at the bottom finishes the package.



The sheath itself is a very good fit, taking some vigorous bouncing to shake the breacher loose, and more to pull it free. I'll still be mounting it in a "upwards draw" just to be sure, but it pleases me no end to have a purpose made, and properly fitted sheath for this very useful piece of kit.






















e

Review: Schrade Army 10 Knife

I had the good fortune to get my hands on another knife to add to my collection. I've been quite busy at my day-job shunting pixels and yelling at vendors about patient safety to do much writing, but it's remarkable how a piece of good steel in the hand makes one feel better. So, in this blade, I am trying to recover my mojo, as it were, and get back on the horse so to speak. Without further ado then, let me present the Schrade Army-10 Knife which was sent to me from the folks at LEGear.

This is a fighting knife, branded as being "US Army" by Schrade which is cool, and I can totally get behind that, it fits both my accent and heritage, being a (dual-Australian/) American citizen and my father having been A US Army veteran (Vietnam, 1969-70) so, as you might imagine, I have a soft spot for the Army. However it's branded, it's the mettle of the metal that I'm most interested in, however.

Lets go into that shall we?

This is a moderately sized, fixed drop-point blade which measures in at 26cm (10.4") of which 14cm (5.3") is the plain edged blade. It masses in at 280g (9.9oz). Comparing that against the KA-BAR Zombie Killer "Death" Dagger with it's 21cm blade, 35cm overall and 340g in mass you can see that it is a far more wieldy blade. especially if you plan on strapping it to your person.

The metal of the blade is a 1070 High Carbon Steel, which is a tough, hard steel, and is commonly associated with hard-use applications like machetes and the like that can and will take a lot of rough use and abuse such as battoning and chopping. The handle material is black Kraton which is a synthetic rubber, and is springy and soft to the touch. The handle is bolted to the full tang with 4 hex-bolts, and leaves the spine of the tang exposed. I read some comments in researching this knife that the Kraton seemed "flimsy" and "rubbery" but I think this must be from folks used to G10 scales and the like. I found it married to my grip really nicely. The lanyard hole was nicely placed too, recessed from the Kraton.

The back of the tang features 5 crenelations that sunk below the spine and the handle, leaving it flush with the back of the blade, making it snag free, but by virtue of the rubbery Kraton, a good positive grip can be achieved without needing to tense the hand unduly. I was always taught to hold a handle fairly, but without choking it, whether it was a knife, golf-club, sword or whatever. Finesse comes from controlled motion, and a clenched fist is a ridged one.

You can see here the sculpting that is present in the Kraton on the back of the grip, as well as the "US Army" logo and decal on the side of the blade. Which was pretty, and unobtrusive printed on top of the black Teflon coated surface of the blade.

Those sculpted regions in the back of the handles marry up to a reverse grip really well, and the cutout for the lanyard hole in the butt of the knife is still nicely exposed in this grip.

In a forwards grip, the finger notch sits nicely between index and middle fingers, with a raised guard to stop fingers sliding forwards, and again ,that set of crenelations to rest a thumb grip on.

The nylon sheath has some features worth mentioning too. The primary belt loop opens up with a broad hook-and-loop band, meaning you wouldn't need to undo a belt to put it at your waistband. A thigh loop set of lanyards and cord couple this to keep it from flapping on the bounce. A press-stud closing PALS/MOLLE band, and corresponding loops give a downwards-draw carry option. the metal loop at the bottom of the PALS band was a mystery to me though, another attachment point? I don't know. It moved independently to the PALS/MOLLE strip.


The front side of the sheath carries a secondary, Fastex style clip closing pouch, with is attached to the main sheath by both a long and broad hook-and-loop field, but also by the straps that wrap around the sheath to form the PALS/MOLLE loops on the back. Having this pouch being removable, gives the option of either stripping it off (at the expense of loosing a layer of additional stability when MOLLE-bound), but also allowing that secondary pouch to be flipped so it opens "upwards" in the event the blade is worn "downwards". That was quite a clever addition. The materials of the sheath are adequate, but not exceptional. There is only one main press-stud closure for the blade, meaning it is not "jump-ready", but as I'm unlikely to be "Airborne" tabbed any time soon, this isn't really a concern for me. The closure does have an odd extra hook and loop layer to it, presumably to adjust the tightness of the closure, but I cant for the life of me think why the trouble was taken, and a second loop wasn't added.

All in all, this is a really nice knife, and I am very glad to have gotten my hands on it. Not the bestial monsters that the KA-BAR Zombie Killer knives are, this is a mid-sized blade for serious working people who need to get a job done, but space is at a premium.

I think I will be adding this to one of my chest rigs and experimenting with how best I want to carry it, because I certainly do want to. Often.

Review: KA-BAR Zombie "Death" Dagger

For my birthday, I was lucky enough to receive the full set of KA-BAR's Zombie Killer fixed blades, which I hinted at a little while ago. This set we ordered from ThinkGeek, and seemed the be the best way to get the whole set in one hit. I'll be covering each of the blades in turn, but for now, have a look at them here: Ka-Bar Zombie Killer Knives Pretty epic, even to look at. Each of the main blades is named after one of the Four Riders of the Apocalypse. I decided to go in reverse order, and look at each blade by size, rather than biblical standard. That's how I roll.

So, first up, here is the Death Dagger, ( which I've lined up against one of the Hibben-esque throwers I reviewed a little while ago for scale) and the skeletonised Charon companion knife that comes with each of the Zombie Killer line. You can see right away that this is a BIG knife, and this is the smallest of the four.

Weighing in at 0.75 lb. and boasting a 35cm (13-7/8") length overall, 21cm (8-1/2") of which is a triangular drop-point blade. Steel of the full-tang blade is a hefty 0.5cm (0.205") for most of its length, but features a gentle distal taper as it reaches the drop-point. The blade geometry gives the sharpened edge a 20 degree angle, beyond the primary grind. This makes for a sturdy edge, which is still sharp, but also easy to maintain. The SK5 steel is reported to come with a Rockwell hardness of between 52-54, which is nice for a high-carbon steel knife, without getting into the brittle side of things. Essentially this means this blade can take a beating but still stay sharp. I like the sounds of that.

The blade is powder coated with a black bead, for rust-prevention and glare-reduction. I was very happy with the finish, and the branding was nicely counter-pointed in the finish.

The handle scales are made of the mysterious GFN-PA66 plastic, and features a very aggressive pebbled texture, not unlike ray or shark. The whole Zombie Tool line features the toxic/radioactive green seen here, but have no fear, it also ships with plain matte-black scales for those "don't light up the neighborhood" situations. For the moment I'm going to leave the green scales on, because whilst not glow-in-the-dark, they are easy to find if dropped, or hanging off my wall late at night.



The blade is quick in the hand, and balanced lightly enough to flick and slash, as well as thrust, even being a lot more knife than I am used to waving around. The handle offers a couple of different grips, with the large protruding element governing where you can place your hands. I have long hands, and found that I could happily have my fingers wrapped around the handle with either my index finger forward, thumb in the crenelated grip provided, in almost a "drop the hammer" pistol grip or with a "two up-two down" fist grip. Either way was comfortable. The guard at the top of the handle seemed quite adequate to prevent my hand slipping over and forwards onto the blade, especially combined with the handles built in protruding "knuckle". A lanyard hole in the butt-end rounds this off to be a very solid piece, and the misgivings I had with its size evaporated once I had a chance to put it through its paces.

This piece, with its "up high on the back of the hilt" geometry, and lightness was very reminiscent of a bayonet and I liked it in the hand. Not as hungry as I would have thought, nor fully sick, or bad-ass, but I'll leave that to the other three Horsemen. The Death Dagger, everything I would expect from my first KA-BAR, solid, tough, brutal and with a plain efficiency that I had lead to believe this brand would give.

The range comes with a very cool scabbard, which I will feature separately, it's that good.

The Zombie Killer Death Dagger: putting an end to what needs ending. With extreme prejudice.

Click to go to ThinkGeek

Review: Zazz - Survive Army Fire Steel tool

The good people at Zazz were kind enough to send me one of these little guys this week. I have quite the collection of fire-steel's now, between my Swedish FireSteel (which was a gift a number of years ago, and has a prize position in my EDC) and the fire steels found in both my Gerber Bear- Grylls Basic and also in the Gerber Bear Grylls Ulitimate survival kits.  I really like these pieces of kit. They work in the rain, in the snow and last for thousands of strikes.


This one has some additional features which are worth mentioning. Firstly, a goodly sized ferrocerium rod (all the better for striking with) and a saw-toothed striking steel. The back side of the striking steel is marked with millimeters to act as a small ruler. The body of the striker, as well as being dished to better fit the thumb, is also equipped with a signalling whistle. Lastly, the body of the ferrocerium rod is also equipped with a button compass.

Here are some shots of me testing out the striker, a very impressive rain of hot sparks, certainly enough to light a camp-stove at the first strike, and can get tinder going in no time at all, in good conditions.

Including a compass is a terrific idea, even if it is not up to military grade navigation, it is far better to have -any- compass rather than none at all. Rod and striker are affixed with a nylon cord and a stopper. The cord appears to be sufficient to reduce the effect of the steel on the compass, for rough navigation, at least.

I'll leave you with the packaging, which is quite entertaining in and of its own right.

I'm certainly going to include this is one of my packs, because frankly, not being without a source of fire is something I strongly encourage. Now to decide which one to put it in!