Review: Mudlarks - All-In-One

I took the family up to the snow recently (yes, there is snow in Australia, not very much, and not very long, but it we do get it) at Mount Baw Baw, and in my planning to do so, I wanted to ensure they would be adequately protected from the environment. I posted about what I wore, here)

Triceratops Girl (in pink) has previously been a model for the Muddlarks "Bib'n'Braces"  so I was prepared to make an investment in a set of their all-in-one coveralls for her and Tactical baby. Cold, wet and miserable children are NEVER a good thing, especially in hazardous and adverse conditions.

The whole Muddlarks range is constructed from waterproofed  breathable polyurethane coated, 150gsm nylon rated to 6000mm+. (See this guide to understand what this rating means)  . The fabric has also been Teflon® proofed on the outer facing of the material which helps resist staining and acts as a Durable Water Repellent (DWR). Water, snow and slush just beads and rolls off.

One of the important aspects of staying warm and dry in the snow is not to become wet in the first place, so this is a great material, especially as it retains its breathability. This ensures that the wearer doesn't steam too much on the -inside- which could lead to dampness and chilling.  The all-in-one Muddlarks provide a single piece coverall that ensures no "puddles and snow down the back" moments, with its ankles to crown coverage.

 Moving from outside to in , just unzipping improved their comfort considerably, especially with the polar-fleece lined larger version. This was child-sized hardshell wear at its best, i think.

The attached hood has an elasticised bill, to keep it snugly fitted in high winds, with a press-stud closure at the neck to keep the wide plastic zipper from sliding open. In the "Size 2" option, there are some press-studs at the nape of the neck to adjust the fit for smaller heads.

The hood, and shoulder/back have reflective piping, to assist in locating and safety in low-light situations. 

The back of the suits also feature elastic gathers, to ensure a better fit, with all the seams being taped for additional waterproofing. This was so effective that when Triceratops Girl fell backwards into a calf deep puddle (for her) that she was still bone dry inside even after sitting in it till i could haul her out.

With elasticised ankle and wrist cuffs, the biggest concern I had was that the girls would get snow and slush into their gumboots, but the Muddlarks design had catered for that as well. The fleece lining in the larger size ensured a warm Triceratops Girl, whilst we bundled Tactical Baby with a insulating mid-layer, and she fared just as well.

 Tapered and fitted cuffs, along with the elastic produced a snug fit, without constricting. but it is the button-closed adjustable elastic loop that really makes these a winner. Able to stretch around the ankle of a gumboot then affix, gater-style under them. This combination really ensures a good seal against incidental soaking, especially for little people. Again, cold, wet, miserable little people are not just a burden in an outdoors adventure,but in a survival situation, it becomes an even more serious risk.

I was really pleased with how these performed in the snow, but I've also seen how well the other items in the range (the bib'n'braces, specifically) perform in the mud, sand and forest floor. I really liked these for my kids.

Review: Propper - Adventure Tech, Level V APCU softshell pants

I took the family up to the snow recently (yes, it DOES snow here in Australia, just not very much, or in very many places) and I got to try out a few pieces of kit that I have been waiting for an opportunity to pull out in public.

My last trip to the snow, some three years ago was a very unfortunate event; sleet and hail fairly ruined out outing, and I had passed on most of my snow gear to the others in my party, and as a result ended up cold, wet and miserable. Not to mention a touch hypothermic. Having lived in the snow several times (Denver, USA / Surrey, UK / Calgary, Canada) I was kicking myself for my lapse of judgement, but as I say, the others in my party were ok, and looked after me.

However, THIS time, there would be no repeats! I payed attention to my ever growing collection, and selected not only a range of layers, but also spares, in the event that I needed them. 

The key piece that I tried out, however, were my new pants from Propper. I picked these up from an eBay sale, and as it turns out they appear to be a discontinued range from Propper. However, the Propper Adventure Tech, Level V APCU softshell pants were a welcome addition to my wardrobe, and certainly proved their worth on my trip to Mount Baw Baw for the weekend. 

I wore a Tough Mudder/ Under Armor shirt and my Platatac Half-zip fleece top  on top, with my HeadSox on my noggin.

I have very long legs, which usually means that I go for a size larger waist to ensure the right length, for pants which don't have a W/L sizing, but in this case that played in my advantage, as I chose to wear these as over-pants, over the top of a base layer of my Platatac sniper pants fleece layer in the first instance, with my Urban Dax as a mid layer, in the event of unpleasant weather.

I found that the mid layer was unnecessary for the beautiful crisp and dry conditions we faced on the mountain, so I felt I could really throw myself about in the snow. 


The material of the pants is a very light, 4-way stretch fabric which is extremely comfortable, both on the skin, but also from a breathability and wicking perspective. This is due in no small part to the Schoeller Nanosphere Treatment that Propper applied to the fabric. This treatment apparently mimics the natural self-cleaning effect of some plants whose leaves always remain clean, because particles cannot adhere to the finely structured surface, and is easily washed off when rinsed, without allowing water to penetrate. It combines with the weave of the fabric to offer a high level of protection from wind, rain as well. It certainly shed snow and slush well, as well as the mustard and BBQ sauce I exposed it to at the chalet. It also seems to resist washing out, so should retain its abilities when I do need to give them a wash.

Also, they were in Multicam! I haven't had many opportunities to wear Multicam. I tend not to wear camouflage "for fashion", (although I got a MC Tactical Kilt from 5.11 .... review to follow! ) so having an outdoorsy activity to test it out in was great too.

The pants have a wide padded waistband, as well as pretty standard belt loops. I actually felt that the softness and lightness of the fabric would have warranted thicker belt loops, just to make them a bit more substantial. but really, I didn't have any problems with them.

The main front pockets were almost horizontally cut into the front of the pants. This was an unusual feature, and it did mean that when using these pockets, I needed to dive my hand straight down in front of me, but certainly did ensure that my pocket goodies remained safely stowed.
 

The pockets are lined with mesh, rather than the same material as the rest of the pants, or some other full-weave liner, which was an interesting addition, but certainly didn't hinder me in any way. The overlap between the front and back lips of the pocket were constructed such that they overlapped nicely, and I didn't experience any wind-bite or water logging as a result of the pocket placement.

The just-above-the-knee cargo pockets were small for this kind of pant, but certainly functional. (they fail the "will it take my iPad test", but I certainly didn't want to be lugging that through the snow), but they were billowed at the back, for extra capacity, and the left set included a zippered side pocket as well. 

 

Whilst tromping about in these on the mountain, I found that I could easily stow my phone in its SLXtreme case as well as my Contour cam, in ITS waterproof case, as well as two to three sets of gloves and or mittens, without a spill or lost technology all day. I did find that the knee-pads I wore sat very close to the cargo pockets, and this impinged on their ability to be filled fully. This was a little annoying, but the knee-pads were -very- large.

The cargo pocket have hook-and-loops closures, and the top of the lid-flap had an opening for pen, light or knife clips, or could also trail a cable.

One thing that I found with these pants is that they stopped the wind dead. Whether I was standing on the top of a ridge, or zipping down a slope on a toboggan with the little ones, they simply cut the wind right out. They did so without the "zitch-zitch-zitch" that Gore-tex "hard-shell" pants might. 
 

This leads me to post this little guide to assist anyone else who occasionally gets mystified by ll the "hard-shell/soft-shell" jargon ... 

I've tried to find an explanation or scale to describe the "Level V" portion of the Propper scale (which goes to at least VII) but this might go some way to describe what different levels and ratings of waterproofedness and breathability mean.

One thing I found interesting about these pants are that not only do they totally lack any pockets at the back, but are also fitted with a wide elastic section, the full width of the waistband, for the entirety of the back of the pants.This meant that they did sit fairly snugly, even with the "slightly too large" size I got, and stayed snug when i was crouched, squatting on a toboggan, or kneeling to pick up and carry my small people. 

I really liked wearing these pants. I stayed snug, warm and dry. I tromped through snow and slush, picked up squealing kicking offspring and sat them on my legs , sat in the snow, built snow-dinosaurs and generally had a good time, all without a single sad, soggy moment.

It's a real shame these are no longer being made, but can still be picked up by searching for Propper Adventure Tech, Level V with the product code F7220, online. Good luck, stay warm and dry!

Review: Manta Strobe helmet light (replica)

I've been meaning to post about this for a while. As my regular readers may know, I simply can't get enough lights. I love lights, and illumination. As one of my favourite designers states "Dark Sucks" 

I saw one of these little guys in my feeds and instantly felt the need to add one to my collection. However, there were two problems. First and foremost was one of the banes of my existence. 

"This Item is ITAR controlled and cannot be shipped or carried outside the United States without express written permission from the United States Department of State. We do not export outside the United States. PERIOD!"   

IR products are just so hard to get from American producers because if this. The second reason was almost irrelevant as a result, its a pricey gadget. I was super lucky when I was sent the
CJ Engineering - Phoenix jr IR strobe .

However, the original Manta Helmet Strobe from S And S Precision looks to be an excellent addition to many real-world users kits, so I wanted to see what I could find.

I managed to find a replica-for-paintball version by Canis Latrans Trading, out of China. These are the same folks that supplied me my "Ops-Core like" bump helmet . Now, before I go into the item, let me reiterate, this is how I could get one of these, legally. It is a replica, so is unlikely to have gone through rigorous QC and testing that an original from S&S would have. I wish I could have a real one, but I can't. This will have to do. 

However, that said, it works a treat!

The manta-ray shaped device is 7.5 cm (3") long, 5cm (2") wide and 3cm (1.4") high. It is curved on its underside to mate with the curve of a helmet and is covered in hook-field for attaching to loop-fields.
 
The underside of the unit (the tail) features a textured button which when depressed, triggers the IR strobe. Because of the risk of switching it on unknowingly, or to confirm that it is in fact on, the strobe has a vibrate function, which gives three pulses when it is activated. This is an awesome feature, and can be easily felt with the helmet strapped on, but is essentially silent.

There are two buttons on the side of the tail, recessed, which trigger the "overt" green strobe. This can only occur when the strobe has already been put into IR mode, and then only by a three second squeeze of both side button simultaneously. This is a great feature, especially for those users who may need to be very aware of not breaking light discipline.

The strobe takes one of the CR123a batteries so prolific in high end electronics and lights these days.
The IR strobes uses three IR LED's, which when activated are barely perceptible within 2 meters to the naked eye, as three faint, pale pink blinks. I have pretty good night-vision, and beyond 2 meters in a blacked out room I couldn't see them. 

The overt, green strobe however, was almost painful to look at, with its twin lime green LED's that all but lit up the room I was testing them in. 

I had a go capturing the IR and overt green strobes both directly with my iPhone, and also down the barrel of my Yukon IR scope  and that really demonstrated the efficacy of this light.  The IR LED's cast so much light that the reflection made the blacked out room.

So, for my use as an emergency beacon  when I am out adventuring (like when I was out testing the Aquayak Snapper Pro, or running about through the mountains) I think it will work out just fine. I want to be able to be spotted by Search and Rescue, if the need arises, or just stay out of oncoming traffic's way. It is a rugged little toy, waterproof and bump-capable. I'm going to pack it whenever I go adventuring, and see who is watching ...

Visual light test of Manta

IR test of Manta, through Yukon IR scope

Review: Strike Industries - Battle Case iPhone4

I tend to burn through "regular" phone cases, which is why I have had ones like the Opt Silicone Armor as my every-day case, and collect "extreme use" cases like the Snow Lizard SLXtreme and the Griffin "Mossy-oak" Survivor and as cool as they are, they are overkill for my regular use. I need something that will give me easy access to all my ports and buttons, protect my glassy faced iPhone 4S from drops, spills, and sticky faced and fingered small humans, without being a brick on the board room table.

I has spotted the Strike Industries - Battle Case when I had been cruising their site for the Tactical Sling Catch that I picked up, along with the Picatinny vertical sling-loop and later on, the Simple Plate-Carrier satchel they were kind enough to send me, so I finally got around to placing an order.

What had initially caught my eye, other than the slim design, was the large "quick pull loop" not unlike the Magpul loops available for magazines.
I also really liked the extra features hidden away within the case.  I am a sucker for extra features, as many of you will already appreciate, but these two were very simple, and elegant additions.

Recessed into the case was a large depression, which Strike Industries have designed to fit a special kevlar insert (for non-ballistic protection only) to bolster the protection offered by the stiff but flexible thermoplastic of the case. A second recessed spot allows a protective lens-cover to be inserted.


 The outer face of the case is macroscopically honeycomb patterned, with a fine grained rough texture for added grip. I really liked the pattern, it is sufficiently contoured to add grip, without being overt. A very subtle surface.

I had wondered about the lack of padding, and how that would protect my phone, but I can honestly say that I've had no reason to have been concerned. I've not changed my usage, and the phone is just as whole as when I had it wrapped in silicone and wire.

The thin side edges are even further textured, with these seven notches in the front and back, adding to the positive grip you can get on it. Between these, and the quick-pull loop, through which I usually curl my little finger when holding the phone, I have not once dropped it, and have frequently carried the whole thing in my teeth, mostly by the ring, when I've needed to go "hands free" without wanting to re-holster my phone.

That loop will easily fit three fingers, two when gloved, which also means that I have been able to secure my phone into much tighter pockets, as I can yank it out easily, with no snagging, no hanging-up just a clean pull.

The honeycomb pattern on the surface of the case really adds to the grip, as well as offering a nice visual pattern. Each of the hexes is also textured with a fine leather-like pattern. This pattern is not unlike the Magpul magazine pull-rings, it fits really snugly in the hand, lays flat on a car bonnet, dashboard or whatever, even at quite an angle, without sliding.

The sides of the case have an extra layer of gripping features, the seven notches on the bottom half of the edges. These really add to the drop-free design and give me a lot of confidence, even when I don't have fingers curled through the quick-pull loop. The leather-like patten continues along the sides as well.

As well as the large loop, there are two eyelets that not only add to the flexibility of the loop, but also adds a connection point for a lanyard, if you don't want to add it to the main loop itself.

I found that my only gripe with the case is how well it fitted. Ironically, the snug fit of the screen-edge lip tended to lift my screen protector, leading to it bubbling from time to time, mostly as a result of the alarm-clock-dock I use not accepting such a hard-core case (this is true of almost all my cases, as it happens, no fault of Strike Industries. I suspect if I didn't continually pop it in and out of the case, that wouldn't be an issue.

I haven't had any issues with the factory-standard accessories for the phone, but some after-market chargers need to wiggle the case apart a little to get them to seat properly.Totally workable. This is one of my favorite cases and it gets a lot of positive comments, even at work. This is a top notch case, that offer slimline protection for my favorite electronic urban-survival tool!

One last thing, the fine folks at Strike Industries also sent me a deluxe set (including lens covers and plug-caps) of their even MORE rugged, spring-enhanced iPhone 5 SHOX Battle Case to review, but alas, I don't have an iPhone 5 .... so, if you live locally to me (Melbourne, Australia), hanve an iPhone 5, and an interest in a rugged, hard-core and stylish case, hit me up, and I will send it your way, with the proviso, that you give me a review to publish!

Review: Benchmade - 8Med Rescue hook

Back in April I picked up a couple of Benchmade safety hooks from LEGear.com.au, one I have already discussed, and the other, I put in the MOLLE visor panel in my car and promptly forgot to cover. I knew it was there, part of my cross-check when I get in the vehicle is to check where my essential kit is, and there it was, one day when I was wondering what to cover next.

As with the 5hook, and the Gerber strap cutter I covered before it, the principle element to these tools is the safe-on-skin cutter at the business end but this particular tool has more going for it than just a blade. This is the 8Med Rescue Hook.

Made of a single piece of 440c steel, which is a pretty standard tool steel, Is made long enough to take a full knife type grip, with a ring at the far end to loop a finger through, along with a crenelated spine and three ergonomic finger notches in the leading side.

The finger grips are sufficiently widely spaced that it can be operated easily with full fingered gloves, surgical gloves or even bare handed with ease. I found that I could wield this with both my little finger in the ring, or reversed, with my index finger through the ring, not dissimilar to how I might wield my other Benchmade blade, the CQB Dagger. 

The blade has the same 0.5" "length" as is sharpened not only on the inside of the back, but also the arms of the edge, meaning that it will cut at an angle, before the main belly of the hook bites in. Especially handy if you are cutting in an awkward possition. The blades reported to have a hardness of 58-60 HRC which should not only keep the cutting hook keen (as they aren't easy to sharpen) but also to maintain the wrench slot from deforming when opening cylinders. More on that in a moment.

This model (as there are several in the Benchmark 8 range) has several additional features that the basic models lack. First up is the O2 wrench, which enables you to open compressed oxygen cylinders, it's placement means you get the whole length of the tool as a leaver to assist in this, as needed, without compromising your grip, or need to remove the tool from your hand, especially useful in a crisis when motor skills might be compromised.

It also features a notch at the tip, which Benchmade describes as a "syringe popper". I wracked my brains about this, and looked at some of my medical kit, as well as some of the lab supplies I have access to at work, and am as mystified as these guys... 

There is also a  notch inside the finger ring that should also fit an O2 regulator, but I'd be more likely to use it to keep a lanyard tape secured. 

On security, the hook comes with a soft case, which is fitted with PALS/MOLLE compatible loops on the back, which doesn't add to the profile significantly, but expands the connection options. The interesting thing about the case is the elasticised cap. With a hook-and-loop closure to begin with, this case has an additional feature, in the band of elastic wrapping around the top of the case enabling you to pop the top and the elastic snags the lid out of the way, to prevent incidental restriction to the finger loop.

I really like this hook, it fits the hand nicely, allowing a full, solid grip for rapid and continual cutting action, key when you need to rapidly strip a casualty, or in my case, might need to rescue someone in distress from a harness or bound up in rope. Having this in my car gives me a sense of security that I have an escape tool handy, for myself, my kids and other occupants of my car or those at the scene of an accident or disaster I come across. 

Review: Ti2 Sentinel S4S cache

Following on from my brief review of the Ti2 SentinelX macro-cache  the maker, Mike Bond was kind enough to send me an example of his previous project, the Titanium Ti2 Sentinel "S" series.

This cache (seen here on a ring along side my other keychain toys the Jil Lite Constel LED microlight and my Cybernetic Research Labs Tactical Whistle.) is made from grade 2 titanium, purported to as strong as steel at half the weight, I must say, I am enjoying the booming Ti gadget boom that we are in.


This piece measures 0.5" x 2.75" externally, and has internal dimensions of 0.37" x 1"
The best part of the design is that it will open from both ends, a philosophy that Mike has passed on to his Sentinel X project as well. This means you can access the contents of your cache from either end, or clear a blockage.

As well as the water tight o-ring seal design. The threading is a custom square design, resistant to cross-threading, less susceptible to damage from dropping and turns eight turns to open into three turns, through its efficient mechanism.

There are fluted, ergonomic grip areas on both the end and tail caps, and the end cap has a large ring slot which can host a wide range of rings, clips, and lanyards.

The titanium has been stonewashed, it is corrosion resistant, sleek and satin finished, these are some very well machined caches. You should check the range here...

I found that the S4S was very small, too short for a needle and thread but perhaps it would work well as a pill fob, a stash for contact info. The longer and wider models would easily accommodate a lot more, but for me, I have filled mine with a very fine product from Black Phoenix Alchemy Lab's, for when I need to mask my natural scents ...

Review: Storm Rider YAK PFD

I'm really excited about getting my first kayak this weekend (more on that later) and that reminded me that I had not yet covered the Personal Flotation Devices that I tried out when I did a trial of the Aquayak - Snapper PRO. When you're out on the water, a flotation vest is just as crucial part of your loadout as a bump-helmet or your shark-stabbing, line-cutting knife (ok, perhaps that is a stretch).

It's PPE of the most basic kind.

In this case, I was lent a StormRider YAK PFD by the good folks at AquaYak and I wanted to show you what made it an essential part of my time out on the Snapper PRO.

These very solidly constructed vests consists of three components; the two front panels and a back panel. It features open sides with adjustable webbing to ensure a good fit, whilst giving you freedom of movement for paddling and water-borne activity.

The back panel also featured a drying hook, with a built-in nylon D-ring
The webbing attaching the front panels to the back are fixed at the shoulder and at two points on the flanks. Between these three points, the harness is highly adjustable, even down to to my light frame.

It might seem strange that the front of the vest is -not- adjustable, its three Fastex clasps hold the front panels but this in fact provides an important safety aspect. By massing the buoyant material at the front, when in the water, this holds your head up and out, ensuring the best  position for breathing. 

The brightly coloured exterior of the vest allows for easy search and rescue in the event you are lost due to capsizing, or bad weather, but you'll note that the insides are black, an unintentional asset if being less visable is desirable. Both front panels comes fitted with several zipperable pockets. The use of mesh and the water-shedding nylon in the pockets, as with the rest of the construction gave not only a number of ways to store important gear, but also to do so in a quick drying and draining fashion.


I found this very useful, as I dunked myself several times whilst in the kayak.


I was really impressed to note that the zippers were all of noncorroding plastic.

An inner retention lanyard provides an even more secure option for survival, signalling or orientation gear.

I stored my iPhone in its SLXtreme waterproof case, my car keys and the like whilst testing, all held snugly and safely.

I also noted that there was a more subdued OD and coyote-brown version of the vest, which I think will be my personal selection.

I've worn PFD's before, as well as SCUBA Buoyancy Control Device, and I really liked the simplicity, and design of this one.

You put it on, strap it to fit, and can all but forget about it when out and about on the water. In an emergency situation, you want to have the best equipment on hand to protect yourself and others from the environmental hazards you will be facing. A well made, worn and maintained PFD is a must for any kind of action on the water you might be facing.