Home Front: Location, location, location

Stepping off my previous post about "Where will you be when -it- happens" I thought I might take some time to discuss my thoughts on the places I find myself, and perhaps this might give you some insights and starting points to your own disaster preparedness regime. As I mentioned previously, I find myself in several different locations in the course of my everyday life; home, my commutes, work, the foothills where Triceratops Girl lives. Whenever I go somewhere, I tend to assess things like entrances and exits, pinch and bottleneck points. High ground, low ground and secured areas also seem to trickle into my subconscious assessments. So, here we go.

Home: I live in what we call "the shittiest house in the street", in what is easily one of Melbourne's top suburbs. Our house is a fairly dilapidated '50's design with brick walls, and a tiled roof. Wooden picket fencing around the front yard, standard (but decrepit) wooden fence along side and back corner and a brick wall along the other. A large metal rolling gate gives access to the backyard and a wooden gate at the front side runs to an outside corridor between front and back yards. We have a street-side window with wooden shutters off the side bedroom and shutterless sliding sash windows at the front two rooms. All in all I feel our house is really indefensible and disaster-vulnerable in its current state. We live in quite a low-lying suburb, close to the bay, often in a weather-front. We have good relations with our neighbors and I've certainly cased -their- properties for survival options. We have food, water and livestock, not to mention my own supply of kit, and enough steel and steel-competent people to make use of it, and ensure

it stays where we need it to.

There are several properties with high blue-stone walls and metal gates, several with solar power and hot water installed and most have water-tanks. One thing we have plenty of in our street is 4WD options, several may have even seen dirt.In the event of a local or widespread environmental disaster, I'm not sure how well our house would hold up, we could tape up the windows, board up the frames with planks from the fence, and the scrap timber I keep around, but it's certainly not ideal. Images of Japan's 2011 tsunami and the 2010-2011 Queensland Floods  strike home the risks rising waters have to homes. I've lived in hurricane regions before, storm damage is something
I'm familiar with, if not experienced in.



Work: I've previously mentioned I work in a health care facility, with a large research capacity. Our facility is heavily regulated and as such is designed to reflect that. It does however suffer from something that many older hospitals do, in that over the years, it has subsumed neighboring buildings, so is a little piecemeal in organization. We have fail-over generators, full steam and compressed gasses facility. Full kitchens and sterilization facilities and fire-fighting, alarming and evacuation processes exist as well as many of the other perks of being a facility of our nature. Being close in to the city we are on the CBD power grid, which has during the peak of summer heatwaves lead to some issues, as has the rare electrical storm, protest and manhunt. The nature of our work also poses its own risks, with radiological treatment being offered, we have those agents to contend with. Our patient cohort are not acute, emergency care, so we are not a point-of-call for outbreak situations, but we do have a fair proportion of immuno-compromised individuals who are very susceptible to infection.We have an animal house for research purposes, and extensive research facilities. There are a lot of resources at hand in the event of catastrophic events, but at the same time, are in the line of fire if they occur. We also boarder with a large hotel, and large government facilities which each presents it own interesting complexity. One thing hospitals are good at though, are operational security. Few entrances, and somewhat regulated movement. Being operationally self-sufficient to some stage mean that in the event of local or regional emergency, they will continue to function at some level longer than most other forms of workplace.

Foothills: I've also previously mentioned the property where my little Triceratops Girl spends most of her time, which is situated in a somewhat mountainous, heavily forested region of the Dangenong ranges, on a dirt road, off a dirt road. Its is still fairly heavily populated, you can see all the neighbors houses, even being over an hour's drive or train from the city it is still very much suburban in nature, even embedded in the trees and mountains such as it is. Torrential rainfall in the wet months and steaming bushland in the dry, the area has its shortfalls, but is otherwise tranquil and doesn't get a lot of non-local traffic. The scenic vintage railway runs through the area, and features both a coal powered and diesel powered means of transport out further from the city, which is independent of local electrical power, which can be spotty in the weather-affected seasons.The risks of bushfires such as the 2009 Black Saturday Fires where there were 173 deaths and 2,030 houses destroyed are an ever-present specter in the hot months. During storms the area is susceptible
to flooding, roads being cut or washed out and the risk of the tall Eucalyptus trees falling, or dropping their large branches on houses, power-lines or roads. I lived up there for a number of years, and it is quite a relief to not be faced with those frequent worries, even though my daughter Triceratops Girl still lives up there, and I commute up to see or or collect her a couple of times a week.



Commute: I take a 30 minute train ride to and from work every weekday, with a change of train just outside the city and a subway ride to get to my destination. On nights when I do kendo, that's a slightly longer subway ride from a different station in the City Loop. I mostly walk around the city, with the occasional tram ride to speed things up. The trains run pretty well, but being an ex-IRA-bombing-era London resident, there is something disconcerting about being in a large metal tube jammed full of my fellow commuters underground. I know it's very very unlikely, but it's always on my mind. Not to mention my favourite scene in Predator 2, "Let's dance...". Again, for what it's worth, I always look to my exits, both on the trains and on their routes. Those pauses when your train is sitting waiting for clearance at the next station are great times to look out the window, and if you're lucky, you will see the network of connecting tunnels, emergency exits and the like that exist. The same goes for elevators and escalators. I'm always left wondering "which of you seemingly normal looking assheads are going to loose it and be part of the problem?" I'm not bothered by crowds on a psychological level, purely a survival and psycho-social one.

On my long weekly drives, I go under two railways, over another, cross a floodway bridge, and over two freeways. Lots of bridges that could conceivably fail and leave be stranded on the wrong side. I have a paper map book and compass in the event my phones GPS isn't up to finding me a way around for whatever reason and try to keep a mental map of refuge, refilling and regrouping points along my way. Traffic pinch points are another concern. Time spent stuck in traffic is time waisted getting where I'm needed, or away from whatever needs avoiding. Peak hour driving takes on an aspect of survival training with the right mindset. "how would this route cope with one less lane, two less? If obscured by smoke or rain?"

What does this all mean? Why is any of this important?

In the event of an emergency, where you are, where you need to be, and where you want to go are all key elements that may well change dramatically, without notice or announcement. What you have on you at the time may be the only resourcing you have at hand, but odds are, simply knowing your environment may well put many more resources at your disposal. Consider your situation, consider the options. Adapt, innovate, overcome.

http://en.wikipedia.org/wiki/Zombieland#The_rules

Review: Utilikilt

I've covered a pocket-covered vest before, but also wanted to give some time to one of my favorite pieces of clothing. I've worn kilts since i was about 7 and my folks had one made for me when we lived in the UK, in our family tartan. When I "came of age" and they said I should get a formal suit made up, I instead chose to get my dad's kilt, and Prince Charlie vest and tail-coat made. Years passed, and I came across the wonder of the Utilikilt, and was in love! These hardy and ready to rumble kilts are made in Seattle and what they lack in traditional styling, they make up for in spades with utility! Five or six years ago for my birthday I was gifted one of their most option-laden models, so here it is, the Survival Utilikilt .

What is consists of is a heavy duty press-stud closure kilt, made of a pretty hefty 9 oz 100% cotton twill. The press-studs affix the two ends in a very secure 'V' in the front, giving ample security to the front, and even takes into account belt loops, which are doubled at the closure point, a great feature. Twin deep internal slanting pockets give a "pants-like" place to stuff your hands and gear. A pair of elastic-gusseted side-saddle cargo pockets. There are in fact two pockets, one shallow, the other deeper, (these are also detachable, and each comes with its own closure flap and belt loops.) The back of the kilt features two standard sew-on pockets, but are just as awesome. Pockets on a kilt, brilliant! A key clasp on the front gives an attachment point for keys and lanyards, which I use to sling a lanyard from my multitool .


One feature that really stands out and puts this back in the realm of survival-wear is the addition of a "modesty" closure system. A simple toggle and loop setup affixes the two front flaps at the middle, and keeps the two fold from opening under any weather circumstance. No risk of wind lifting up one side to flash the civilians. There is even a button hole on the back side of the kilt, so that in a pinch you can bind the front and back together to give a loose-shorts effect for those times you -really- don't want your undercarriage exposed, like assaulting a barricade, climbing over burnt-out cars or vaulting fences.


Utilikilts have several other awesome models, and the orange one above is one of them, this is the Workmans Utilikilt which is made from a beefier 12 oz. 100% cotton Duck cloth. This kilt was designed with construction workers in mind and as such features places for tape-measures to clip,and two riveted-on multi-chamber saddle pockets with pouches for kids of items. “The Grip” adjustable side hammer loop, which fixes with internal press-studs and provides a really good attachment point for hammers, tools, holsters and the like. My FUBAR fits really nicely on it. Again, this kilt features twin pockets at the back and also comes with a "modesty" closure system of a couple of internal press-studs to close up the pleats and make a set of quasi-shorts when the need arises.

Both these kilts are rough and ready, rugged and hard-wearing. The black Survival has faded slightly, but gets a lot of wear. The orange Workman is quite stiff, but that comes from being such a heavy fabric. I feel I can depend on them to take whatever I dish out to them, have worn them whilst camping and adventuring, and will wear one of them to the Tough Mudder at the end of this month.

Here's one last pic of me in my -other- Utilikilt, a more refined office-wear version, the  Mocker Utilikilt in olive green,after a week in the office, going to see the Sisters of Mercy play, sporting my Zombie-Tools t-shirt.

Review: Platatac Recce Map Pouch

Welcome back viewers, I've been having urban adventures and haven't had time till now to post something, but here we go, hot off the shelf and field tested Thursday night whilst on my Tough Mudder training run.Its been raining a lot here in Melbourne, and I wanted something to house my iPhone whilst I was trudging around the course so I could check my pace and time with the Trails App I use. Previously I've shown you the iPhone case I use which, combined with a screen guard, gives me some incidental rain protection, and has a carabiner to attach it to myself, but for running, I wanted something that would be strapped down, to avoid the flapping gear-effect. Its bad enough that I wear boots and cargo shorts, compared to my lycra and Nike wearing team-mates, without having tech swinging off me as well. So I of course, turned to my favourite Tactical gear supplier, who had a solution for me! This is the Platatac Recce Panel.

It consists of a 1000D Cordura pouch fastened with a hook-and-loop strap, that is mounted to the wrist by two wide elastic cuffs, which feed through loops in the heavy 25mm webbing sewn into the back of the pouch. The loops and pouch itself are ambidextrous, just a matter of swapping the sides and adjusting the elastic loops to fit. The elastic comes with heavy nylon buckle furniture and hook-and-loop fixtures. On my bare skinny wrists the hand-end loop was in fact too thin for the hook-and-loop to bite, so I need to loop the elastic back through the buckle, which worked just fine, all in all giving a very secure and stable platform for all my Predator Wrist Device needs. The spine of the pouch sports an elastic pen-pocket, which is a nice touch. I need to find myself a good sturdy pen to fit snugly in there, "for close encounters". The magic of this pouch however is within the cordura flap. There are two heavy clear plastic pockets, one folded on top of the other, for storing maps and documents.


 The"top" pouch is double sided, and features an unsealed(but "internally" opening close to the middle seam, which comes as the first layer when the pouch is opened up. Closer to the wrist is a single-sided pocket, also clear plastic fronted, with a hook-and-loop seam on the one side. Wearing this on my left wrist, the hook-and-loop is on my arm-side. There is sufficient room in the inner pocket to fit my iPhone4S in its case, and seal the pouch up, and still have my headphones trailing out (to listen to music and the Zombies, Run! immersive running app I also use. However, in its case, the screen is difficult to access, and the capacitance is reduced. Out of its skin, everything worked just fine. I found this to be a great addition to my running kit, and whilst I wont be taking my phone on the Tough Mudder, I will certainly consider using this for both my regular camping and adventuring, and as part of my Stargate Lasertag LRP kit. Having maps and orienteering documentation on hand, as well as GPS data from my phone will be a very desirable. I was thinking I could mount one of my solar collectors to the back of the unit, to charge-on-the-go.

This was an occasion where the tool really does fit the need, and I am very glad to have added this to my collection and to my kit.

Home Front: where will you be?

It occurred to me that most of us, at least most of the people I know, spend a lot of time away from home, day-to-day. We work, study, commute. In the event if disaster, this can be quite a game-changer. Sudden, catastrophic events are usually by their very nature unpredictable. Earthquakes, tsunamis, tornado and human-acts of violence and accident could and can occur at anytime, with little or no warning. Regional seasonal risks such as hurricane or tornadoes, bushfire or floods can be planned for, and may even have sufficient notice to make where you are at its onset or alert sufficient to get home. Obviously, it's hardly an option for most of us to preemptively bug-out and go off grid, to be totally self sufficient. Certainly some people can make that step, and make it work for them, but the reality is that the rest of us need to live our lives in more mundane styles. It is however one reason my EDC is rather comprehensive, to say the least. Vast might be more accurate.

So, given that I am in a position where "heading for the hills" is not a day-to-day option (more on that later), it falls to me to be aware of my situation, and preparedness options where I am. I live in a green and rather fancy suburb, proximal to Port Phillip Bay, and a highway. Being close to the bay, flooding could be an issue if there was a spectacular tidal surge, but this Is very unlikely. I commute by train to the city, changing trains at a major hub before taking the underground city-loop. My work is just on the edge of the CBD, around the corner from the Parliament Building.

My workplace is made up of several disparate connected buildings, and I work on the fourth floor. Due to the nature of my workplace we have a variety of safety and disaster management systems in place, which is great and all, but as you might well imagine in the event of disaster, I'll want to get -home-. If the trains, and roads aren't an option, it's an 11km walk. Annoying and time consuming but totally doable to get back to Tactical Baby, her mother and my step-daughter.

My first daughter, Triceratops Girl, lives with her mother in the Dandenong Ranges foothills, which is about an hours drive from the city, a little less from home. I make that trip back and forth a couple of times a week, as part of my visiting, picking up or dropping off arrangements. As I've mentioned previously, this is a heavily forested outer suburb, and is in an area at risk from bushfire, storm damage and flooding. The CFA have a great system and fire-awareness program, and everyone living in the area is expected to have a bushfire plan. Power cuts are common up there as gum trees often drop branches in storms, or due to heat and drought stress, cutting lines. Due to the nature of the terrain, reticulated water and underground power are not available to all homes.
In between the two, are a long stretch of suburbia, some bush land, paddocked rural homesteads and mountainous foothills.

Finally there is the northern suburb my other partner lives in. As you can see this is across town and whilst no where near as far as where Triceratops Girl lives with her mum, is urban travel all the way and crosses several major freeways on the way. Being an urban environment, the route is filled with traffic, trams, and shopping strips. In the event of a wide scale emergency, it would take quite some time to make it over there I expect, something which does not fill me with joy, I can assure you.

All in all, I have a very spread out life, geographically, and the prospect of being away from my important people in the event of a catastrophe. Looming disaster I am pretty sure I can respond to for all my loved ones, and from then, regroup and make ready for what is to come.

What will you do?

Review: Jackeroo hooded vest

Melbourne's inclement and changeable weather leads to some interesting clothing requirements. Just as in Crowded House's "Four Seasons in One Day", we can have a weekend topping 37oC and dry, then 25oC and tropically steaming and wet to 19oC drizzly and dank by Tuesday. Seasoned Melbournites can usually take this in their strides, and plan appropriately, (even if our tram and train networks seemingly can not), however having some multi-seasonal pieces of clothing goes a long way towards not being caught too badly off guard. My take on this is to wear layers, and take-off, or do-up as required. I usually keep a pair of fingerless gloves of some kind stuffed in the pockets of most of my coats and outer-wear vests, and a bandana, shemagh or Headsox scarf to round out my options. However, here is a piece of clothing that fills several niches at once. This is the Jackeroo hooded vest, which is a KMART line, apparently. I'm a big fan of vests, mostly because I wear my holster harness all the time, and a vest is a good way to cover up its lines. This adventure-wear vest is no exception. With long lines, it comes down past my belt line, even in size M, and zippers shut to give me a nice snug fir to keep the wind and weather out. There are two chest pockets, closed with hook-and-loop, one of which featuring a second, zipperable pocket and lanyard loop. The outer is a tightly woven nylon and the inner is a breathable and wicking polyester mesh.

Below this are two bulkier triple pockets; one side opening pocket for hands,and two buttoned-down gear pockets on each side give ample storage capacity. The bottom of the left pocket has another lanyard loop. The waist has a well fitted and mounted shock-cord drawstring, adjustable on both sides. The hood buttons to the body with press-studs and features the same wicking mesh as the body. A great feature of this hood is the incorporated bill, which extends past the drawstring, a great addition for glasses-wearers like myself.
 The collar of the vest also has some good features worth mentioning.

As well as having a press-stud closure, the high collar is tailored to stay up without being too constrictive, which is a welcome relief to those of us who don't like water trickling down into our drier layers.Not only is the vest quick drying (but not waterproof, mealy resistant)and very light, it also packs down int a very small bundle, for when you want to either pack something just-in-case, or the weather changes and it's too much to wear. I usually just open mine up, as the light material just whisps around me day-to-day. I have only seen these in khaki, which is great, as it's my colour, but the other products in this line also come in light-safari-green.

I'm very happy with this as an inclement weather vest, camping and adventuring-wear, and urban preparedness ready piece of clothing. It fits my aesthetic nicely, and is hard wearing, light and suitable for multiple conditions.

Review: SIGG 1L bottle

 I saw a review on Personal Armaments by Rob, on his Vintage SIGG Stainless Steel bottle, and I was reminded that I hadn't yet done a review of my own SIGG, which has been a steady companion through some pretty rough times, and as you can see it has weathered it pretty well. This is the 1L aluminium bottle, in the Gold Maha style offered by SIGG a few years back.

The great thing about SIGG aluminium bottles is that they are pressed from a dingle puck of metal into the bottle form, no seams, no edges and a unibody construction. The design is smooth and elegant, wit ha good sized lip ad a neck that allows a lanyard to be tied up to it. I've fitted mine with a piece of kendo himo cordage, with a knotted end, which I often carry mine around by, looped through the stopper hole, and pinched between knuckles. The inside of the bottle is coated with a plastic liner, which is reported to remain unbroken and in contact with the metal, even through denting and dropping.

 The lid is a high density plastic, with a rubber gasket, and has fared pretty well over the years, although I have had to replace one due to the threads wearing down a little. Powdered sports drinks being abrasive more than anything, I think. I've certainly dented my bottle often enough, and inspection of the inside show no signs of damage. Around the lip I've noticed a little pealing, which was more pronounced on my last bottle.

Yes, last bottle. This one is unfortunately not the same one I initially bought in 2008, as I managed to mess up the threading somehow, and even replacing the cap wouldn't give me a reliable seal. Not a fault of the bottle, per say, apart from a too-fine fine thread perhaps. Some of the external paint has been banged off, but that's more of a mark of pride to me (and my paleo-friends, who initially inspired me to purchase a SIGG). I carry mine in a FUP pouch, usually slung on the main body-strap of my messenger bag, but have also taken to wearing it on my hip when I have been running in preparation for the Tough Mudder Melbourne.

The bottle is not insulated, so a hot drink will transfer heat directly to your hand, and a cold one will warm in the sun, but for carrying a liter of fluids around all day in the city, hiking, on the car or at big-desk meetings I am very glad to carry my Maha SIGG.

Review: Platatac Modular Radio Pouch

Here's one of the last Platatac pouches that I have currently, and it's a pretty cool one. As previously mentioned, I got this as part of a bundled pouch deal and have happily had it attached to the cummerbund of my MAC armour carrier  since I got it. This is the Modular Radio Pouch by Platatac. It is designed to take the AN/PRC-148 MBITR (PRC148) Radio but as i don't use that kind of radio, I felt the need to find alternate uses, which I'll get to later on. This pouch features the same heavy 1000D Cordura that the other pouches like the very useful FUP and SR25 pouches which is not only IR treated, hard wearing but sheds dirt and grime very effectively, I've found. This particular pouch is interesting because like the other Platatac shingle pouches, its open top is managed with a shock-cord loop, which in this case, is fixed with a nylon webbing loop attached to a Fastex buckle. 
 
I really like these buckles, far more than hook-and-loop.  One great feature of this pouch is the two side pockets, which will fit accessories such as my Gerber multitool and my trusty and blindingly-bright Surefire 6PX. The sides of these pockets are elastisised, to keep your item snug and secure, and feature a hook-and-loop fixing webbing cover. The double rows of PALS/MOLLE attachment loops give this pouch the same rock-solid attachment to whatever kit you happen to want to mount it to. You can see the shock-cord loop's knot in its grommet at the back, between the MOLLE loops. A drainage grommet is fitted to the base of the main pouch and a webbing-taking loop is fitted to the stiff and reinforced backing of the pouch at the top, for use as an alternate attachment method.



So, as I said earlier I don't use the big MilSpec radios this particular pouch is designed around, but for my Stargate Lasertag LRP and costuming needs I have come up with a couple of options. Here it is holding an old PlayStation light-gun, which it fits quite snugly, when the shock-cord is adjusted. I don't have an actual handgun to test it on, and I'm sure if I did I would use a purpose built holster for it, but this gives some idea of its capability.  I have also used it to carry one of the extra-tall Nerf Extended Clip .

All in all this is another example of a great piece of Platatac gear, adaptable, multi-purposed and rugged.  I'm very glad to have it in my collection, and look forwards to lots of opportunities to load it up and hump it about!