Review: Agalite Wind Warrior jacket

It's been a cold winter and I've covered my very cool Baubax jacket which has pretty much been my go-to for all my outdoors activity this winter, but it's feature rich design actually limits it in some instances; its a bit big and bulky, and has too much going on. Sometimes, quite often in fact, I want something simple and flare-free. I was blessed with a care package from my lads at Breach, Bang & Clear in the form of this spiffy jacket from Agalite, emblazoned with the BB&C logo. It arrived over -my- summer, so I didn't get much use from it for a few months.

Once everything stopped burning all the time here, and the cold and wet set in, I found myself pulling this jacket out every now and then, and then it came to be my go-to travel-jacket, living in my SUV for any time I was out and about and the weather took a turn. Which it does all the time in Melbourne, comically.

This is the Agilite Wind Warrior fleece jacket which was "designed to keep Israeli Military Operators warm during static operations". That should tell you a few things about it for a start.

It is built from 3 thermal layers including a wind-blocking internal membrane that keeps out cold winds. Fleece inside and out it's soft and snug with that instant warm feeling you get with a high density fleece. However its that inner windproof layer that really makes the jacket what it is. I've never had  a soft-shell jacket that cuts the wind like this. It's much more like a hard-shell. In fact, I actually had problems with overheating and sweating on my back and arms, in milder weather. That's probably my biggest fault with it.

It doesn't breathe. I've put it back on later to find it still wet on the inside, which might be a problem for proper sub-freezing cold-weather users.

A chest pocket on the left breast is quite spacious, certainly big enough for a phone, documents and the like. The choice of fabric change for this panel was a little strange, I guess it makes it lighter, but I don't see the need for it. The zipper is nice, and fits into the folds, out of the way until needed. The right sleeve has a bicep pocket, and whilst I rarely use these, I found it well placed, and unobtrusive.

The sleeves themselves were well fitted, and a good length, something I often have troubles with my extra-long arms, with elasticised cuffs to seal out the wind. I found I couldn't push the sleeves up very much, due to the tailoring but given its designed purpose, this isn't too much of a big deal.
Both biceps also feature broad square loop-fields, allowing considerable amounts of patch-goodness to be attached, I really appreciate a bit of real-estate here, for bigger morale patches, or combinations. The loop-fields are also really well colour matched, so they fade into the rest of the jacket nicely when unadorned, both in tone and also in tailoring.

The main zipper comes up nicely, even when the jacket is fully closed, another aspect where the tailoring has been really well thought out. You get a good close seal, without it being restrictive or obtrusive into the throat.
This also covers the waistline, which is another aspect that I often get caught out with, but the shock-corded waistline keeps draughts out and my kidneys snug. The jacket lacks fancy features like a hood, internal pockets, or a variety of other extra features sometimes seen. However, it has properly lined pockets which I'm only too happy to be allowed to make full use of on cold mornings.
It's also light, and packs down really well, which is a bonus for when it warms up and you shed it. The jacket has lived in the back seat of my SUV for months now, served as both blanket and pillow on a number of occasions, as well as keeping me from shivering on a number of occasions. If you're looking for a light, well put together and simple wind-killing jacket, you could do a lot worse than this offering from Agalite. Go scorpion or go home.

Review: Baubax jacket

Its just about spring-time here in Melbourne, which means a lot of rain, and cold mornings for me. I hate the cold, and hate being rained on. I am a big fan of soft-shell waterproof jackets and having lots of pockets, but sometimes you want something more than just rugged and dependable, when it comes to snivel-gear. You want something nice.

I saw the Baubax jackets on Kickstarter and their portal site (and was directed to them by umpteen people) and really liked what I saw. They offered four designs, (Dress Blazer, Sweatshirt, Windbreaker and Bomber) in a range of colours, and materials, which all featured a mass of features. Billing them as the "Worlds Best Travel Jacket". I jumped on the bandwagon and eventually, after much delay, they arrived.



I ordered the heaviest and feature-packed option, the Bomber.

A travel-friendly Bomber Jacket with stylish flare, this street-smart piece features pockets for all your smart devices, a built-in neck pillow, an eye mask, and a detachable hood. But that's just a handful of features.

The jacket is made from a machine washable 100% polyester soft shell, with cotton and fleece linings, and weighs in at 1.2kg (2lbs 10oz) making it quite a hefty piece, but that weight gives warmth and security.

It is also PACKED with features:


GLOVES: Built-in half-gloves that easily slide in and out of the sleeves, to keep you warm and cozy when you're on the go. Made from cotton, they will soak up water if you wear them in the cold and wet, but they cut the wind in dry conditions and are really great on those cold morning train-station waits.

EARPHONE HOLDERS: Built-in Earphone holders always keep your earphones untangled and ready for instant use. I havent really used this much, but the loops make really good deep-cover securing locations.

BLANKET POCKET: All BauBax jackets come with a pocket to carry the optional extra proprietary 60"x40" BauBax Blanket that'll keep you warm and cozy when you're traveling. If you don't get the blankie, another woobie or even a dry-cloth would fit in there nicely.

KOOZIE DRINK POCKET: No more fumbling with your drink and your laptop on a plane table tray. With an insulated neoprene drink docket, keep your hot drinks warm, cold drinks cool and your hands free for work. I have only occasionally actually kept a drink in there, but the padded and press-stud fastening pocket is good for loose valuables you want to keep protected.

iPAD POCKET:A 10" pocket to carry an iPad or any full size tablet to free up space in your carry-on or purse and for more convenient plane boarding. This is excellent, and I have stowed my iPad in there a number of times. It just "fades away" into the side pocket, seamlessly and is right there when needed. Be sure to do the little zipper up though, lest you drop expensive delicate technology.

TELESCOPING PEN: This was a cute addition. Clipped to the main zipper is a 1" pen that extends to 4", the bottom of the telescoping pen has a soft tip Stylus to ensure you always have a Stylus handy. It's totally not integral to the jacket, but a very nice feature nevertheless.

SMARTPHONE POCKET: Easily accessible water-resistant smartphone pocket that offers a seamless connection to your earphones., built into the upper outside of the chest on the left, it was a great place to secure my phone when out on the mountain recently.

SUNGLASS POCKET: Easily accessible sunglass holder in a pocket in the upper right side of the inside of the jacket to keep your optics safe and handy. Built-in Microfiber cloth included for cleaning sunglass lenses was also a really nice touch.

PASSPORT POCKET: Passport size inside chest pocket designed for quick access to boarding pass and ID while traveling. Keep your secure documents secure, and handy at the same go. Obviously they're not as safe when the jacket is open, but a damn side safer than if they were in the back-pocket of your flying jodhpurs.

HAND WARMING POCKETS: Multi layered hand warming pockets for extra warmth. I can not stress enough how good it is to have properly lined pockets. built of the same material as the rest of the jacket, both the inside and outside of the pockets are equally warm. No more still-freezing from the inside with these pockets, even with the jacket open.

DETACHABLE HOOD: BauBax Bomber and Blazer come with a detachable hood. The hood features a double press-stud gorget for really bad weather, and zippers onto the body of the jacket, behind a quilted collar that matches the waist and cuffs.

EYE VISOR:  Inside that hood is a fleece eve-visor, which forms your very own shade-cloth and eye-patches when you need a daytime nap, or just don't want tot make eye-contact whilst browsing for saucy delights on your phone in your lap. I found however, that the visor flopped down over my eyes when I was walking around with the hood up. A button-eyehole would have been a good feature to include on this.

NECK PILLOW: This was super sweet. A semi-built-in, inflatable neck pillow that easily hides inside the hood of the jacket, by means of a buttoned down compartment, but was also easy enough to hang behind the shoulders from the hanging loop. Its innovative valve technology allows for a 2 second, one breath inflation. Simple and easy one press deflation, as well as a very comfortable design rounds it out. Also not integral to the jacket, it was a brilliant addition, especially for those of us who often find ourselves sleeping in odd places, at odd times and can't just rack-out.

this was a really good jacket, and I'm glad I had it this winter, and spring, although we had to wait a long time for them, and the sizing of the ladies sizes (I got one for Omega as well) was a bit limited.  That said, the jacket held up well in all kinds of inclement weather, including snow and sleet. The cotton cuffs soak up water, and wold be better is treated to be waterproof, but otherwise, its a great jacket.

Events: Snow trip - gear summary

I was lucky enough to be taken up to the snow for my 40th birthday not long ago, by my mum, who kindly took my whole family up for a long weekend at the Falls Creek snow resort in the Victorian Alps. Snow, in Australia? Yes, it snows here. Sometimes, in a few places. When we went there was a base-cover of around 80cm and it was forecast to be between -3oC and -6oC, with 24cm sow expected each night, or thereabouts.

It was a 5 hour drive, including an hour on the shuttle-bus, as we didn't want to go through the hassle of snow-chains and on-mountain parking, as well as windy, icy mountain roads. Leave it to the professionals, I say, and have a nap on the way.

That said, when we arrive mountain-side, it was sleeting pretty heavily, and continued to do so for the majority of the day. We lost a bunch of snow cover and everybody got damp. Some more than others. That's kind of what I wanted to cover in this post. What I wore to stay warm and dry. What gear  I took.
 Now, I cheated to some extent in that I hired ski-boots, and the outer-layer jacket and ski-pants for when we actually went skiing, (my first time in 20 years, since I lived in Calgary, Canada).

However, I also packed accordingly, for the times I wasn't skiing, and I'm glad I did.

I've had quite some experience in cold climates, both Canada, the UK, Danmark, as well as holidaying and I know they key elements to not having a bad time are to stay dry and warm. Not always both, but if you are one, or the other, you can usually get by. Cold AND wet? You're going to have a bad time.

Here's my layered approach to a trip to the snow:
I wore as my base-layer, the Platatac fleece leggings, and DriFire long sleeve shirt. I don't have any fancy socks, but tend to get hefty heavy-duty socks from the supermarket and wear them to death These ones are Kirkland's,, from Costco. nothing special, but long lasting and don't get stinky.
I wore my Danner Striker ii GTX combat boots, which could do with a thorough polishing, but I hit them with a liberal coating of Kiwi boot waterproofing spray and they worked a treat, even when I stepped through slush up past the ankle. Be sure to open the laces right up if you're waterproofing boots, and get in around the tongue to ensure you don't miss any leakage points.

I looped the leggings foot-hole stirrups over my socks, so they didn't ride up, and I had full coverage from toe to belly-button. Tucking my shirt into the elastic waist of the leggings then carried that all the way up to my neck. No cold draughts.

For my outer layer, I took my snow-proven Propper Adventure Tech shell outer pants, which offer a wind and water proofing layer that I really appreciate. They don't have a lot of pocket real-estate, but I made do, and didn't either loose anything, or lack anything on my adventures.

Over the DriFire shirts, I wore the lightweight Propper windcheater which provided me a really good lightweight dry-layer, as well as having a good neck-seal. My one was a bit too shirt, so my super-long arms tended to poke out, but I had a plan for that anyway.

As my outermost top layer, I chose my Baubax multi-function jacket, which is a semi-hard shell with a hood and thumb-hole fitted wrist extensions. I'll be covering this in detail some time soon. It held the sleet off really well, although the cuffs and the wrist extensions got pretty sodden. They could do with a dose of waterproofing spray as well, I think.

As far as outer layers went, it was a spot on combination for what I was expecting, although had I wanted to stay even dryer, I should have packed my Hazard4 Poncho Villa but I erred on the side of less gear. I should have left out my spare 90's era snow-pants I got when we moved to Calgary, but I'll pack it next time.

For head and hands, I wore my Peruvian fleece caps, along with one or two Headsox to keep my neck, mouth and ears warm. I wore my dual layer, long wristed Condor Nomex gloves which I also gave a liberal waterproofing. That can of spray was an excellent addition and I can't recommend them enough. I think I shall trial a few different ones soon.

I wore a skiing helmet, to which I mounted my Contour Cam in its waterproof case. I gave the misty fogging Arena Flakjack goggles, with a smoky lens fitted, which remained mostly useable when I was skiing, but I needed to keep taking them off and wiping them off. The goggles really helped me have a clear and wind-free view of where I was going at upwards of 40kph downhill, who knew? I didn't hit ANYTHING this time. (I killed two aspen saplings at least, when living in Calgary).

I wore my Platatac Bravo hydration pack, with a 3L Source WXP bladder in it. I have a Blackhawk Side Plate carrier mounted to the bottom of my Bravo, as its hook-and-loop top makes it an excellent flat-pack pocket.

All in all, I was really pleased with my loadout, but most of all, I can't go without saying that my favourite bit of cold-weather kit was the SORD StormTrooper belt-fitted muff. Not only did it's pockets keep my needfuls (like my Manta emergency strobe, CLIF bars, and the like), they also were a place for me to stuff my gloves, and also just plain keep my hands warm. Warms hands mean good-times.

Review: GoST Paleo Barefoots CAYMARO Paws

This is a much delayed post, and I owe  Jörg Peitzker of GoST Paleo Barefoots a big apology for not getting it out sooner.

That said, this is my fourth pair of GoST Barefoots that I have trialled, and the second set of Barefoots with their imbedded "PAWS" traction pads. These are the CAYMARO design, with the GoST new and improved PAWS2.0 style, as my first set was really a prototype version.

 I contacted Jörg after I found that the PAWS on my Anterra's had worn off or worse worn down, to such an extend that some of the chain links had been trapped from the inside and not rotated freely as I ran.

I found that they had then worn unevenly, and had actually damaged the rings! Not impossible, but unusual, so when I told Jörg he informed me that it was indeed an issue they had seen with the early versions and he sent me out not only replacements, but a new model as the replacement too!

Check out the previous models here:

The original Paleo-Barefoots-PRONATIV Classic sole

The more advanced Paleo-Barefoots-ANTERRAClassic sole

and the Paleo-Barefoots ANTERRA PAWS sole

Made of the same "4 in 1" welded 0.55 mm gauge "1.4404" stainless steel  with a 4mm external diameter chain and an internal diameter of 2.9 mm as the PRONATIV's, and the ANTERRA's. The CAYMARO's have a slightly different lacing and tongue pattern, and I really liked it.

Rather than a 1/3 sized lacing bracket, the CAYMARO's laving runs almost 2/3 down the length of the shoes, which means you have a lot more play to adjust the fit and feel of the shoes, which given they essentially become a second skin, it allows a far greater range of customisation. I found that over extended runs (I've done several Tough Mudder events, and hundreds of km's on the track and trail, having a good fit is key to the freeing feel of the Barefoots. These are the best fitting models yet, though getting them to fit right takes a couple of moments longer than the ANTERRA or PRONATIV's it is time well spent.

The new and improved PAWS are thicker, broader, firmer and more deeply embedded in the rings, this changes the feel of the ground underfoot, mostly because of the harder beads and the more coverage, but when running on hard rocky surfaces, gravel or the like, that can actually be an advantage. They certainly still feel good on man-made surfaces like polished wood or concrete. No more slippery shopping centres!

The improvements are spot on the money, and I had expected no less from the GoST team. Keep your eyes out for their new "less like socks, more like runners" versions, the Urbans ... coming soon!

Review: Back Country Cuisine - Cooked Breakfast

Here is the fourth and final chapter in my "instant meals" pieces that I've been covering. The first was the Outdoor Gourmet Butter Chicken, which was delicious, the Back Country Cuisine Roast Chicken which was passable, the Outdoor Gourmet Tandoori Chicken, which was also delicious and now the last entry of the four I had collected to sample, the Back Country Cuisine Cooked Breakfast.

Billed as a "satisfying beef bacon, scrambled egg in a hash brown potato mix served with baked beans" I wanted to have non-dinner one to try, to give a range of meal options in my mix, so it seemed like a simple enough addition.

As with the other three meals, the Cooked Breakfast consisted of a full meal, freeze-dried to preserve them, and make for a light-weight, portable and stable foodstuff. In the freeze drying process, crystals of frozen ice in the food are sublimed (evaporated) to water vapour in a vacuum chamber.

This produces a completely dry food that allows water to quickly get into the pores left by the ice crystals to give a juicy, tender food product when reconstituted. After packing, the Back Country Cuisine meals are heat-sealed in their foil pouches from which all the air has been removed and replaced with nitrogen. This keeps the food safe and "fresh" for at least three years without the need for preservatives.

The Cooked Breakfast meal weighs 90g dry, and requires 250mL of hot water, and comes with a second retort within the main pouch, which contains the haricot baked beans component of the meal. Once cooked, this is a 340g (12oz) meal, and again, it is quite possible to eat the whole meal in the bottom half of the retort, which comes with a "tear-here" notch for ease of use, to change it from a cook-pot into a bowl. Splitting the boiling water between the main component, and the beans, re-sealing and waiting for 10 minutes to reconstitute produces the meal.

Nutritionally, the meal provides 1702kJ (408Cal) as a unit, which breaks down to 501kJ (120Cal) per 100g, and equates to 20% or the recommended daily allowance.

However. This is probably the worst instant meal I have ever tasted. The egg was simultaneously stiff and spongy, and tasteless like foam. The bacon beef was not even TVP standard, the hashbrown mix was mush and the beans. The beans. The tasteless, white, sauceless beans didn't rehydrate, and were still hard and dry in the retort, and didn't further reconstitute with additional water.

This is one of my rare negative reviews. This was terrible. Not only that, but I became very ill shortly after eating it, and I had to go home from work following eating it early in the afternoon. I was sick for a couple of days. It wasn't even tasty. Sure, it might not have been the BCC Cooked Breakfast, but I'll not be having another one. So, 2:2, the OGC meals were 2/2 delicious, the BCC meals were one passable, one awful and sick-making. Certainly not what I would have wanted if I had been out bush, or living in the Bunker.

Review: Mystery Ranch - Removable Stick-it

I got in touch with my mate Tay Choon Mong at Hornest Singapore, my favourite stockist of the hardy and heavy-duty Mystery Ranch packs and products, after I saw that they had some accessories I had been hanging out for come in. You may recall I have one of the rare Mystery ranch "Asia Pacific only" 1 Day Assault Pack bags, which is a cross between the more mature 3 Day Assault Pack and the more recently released ASAP Pack.

I also have one of the Cinch straps, for comfortable wear and quick release of a pack whilst wearing a loaded plate carrier.

Great kit. The particular accessory that had come to my attention was the Removable Stick-It flap, seen here in Coyote, mounted to my black 1DAP. The Stick-It is a detachable beaver-tail that mounts to the bottom of a compatible pack to offer external storage when you've either gotten too much stuff, or just something too big for your pack to carry.

Built with 500D Cordura for long-haul durability, which I've come to expect from pack-makers, and fitted with mil-spec 1" webbing straps, Mystery Ranch have gone all out on the both the construction and the hardware. The buckles have a clip-in end, for fixing to MOLLE loops or other webbing on your pack, as well as a spring loaded friction lock for the working end of the buckle.

This kind of attention to detail as well as using better-than-standard fittings is something I love about Mystery Ranch. You pay for it, but it's worth it. The Stick-It attaches to its host pack with four press-stud closing loops of webbing, which feed back into the accessory by extra loops of MOLLE style webbing sewn into the Stick-It's interior. Those press-stud loops allow you to attach it to the bottom of any pack with MOLLE on its base.

I've put it on my Platatac Light Field Pack in place of its "Office" Admin Pack, or in fact as well as it. It also fits the Propper UC Pack, and the old standby the classic Platatac Bullock Echo, though the Echo already has a beaver-tail attachment built in.

The Stick-It has a couple of other interesting features. It is constructed to have expanding baffles in its Center line, in case of very bulky loads, with plastic inserts to stiffen the sides and carry the weight more evenly. You can really fit quite a lot into this, and is is the smaller of the two sizes offered. It also had a set of drainage grommets in its base, for those times you've taken a dip or been caught in a monsoon.

Another very forward thinking feature is the sheer length of the webbing for the attachment straps. This both lets you place the buckles anywhere from right at the back of the pack, to all the way at the front for quick release options of your over-load without shucking the pack propper. They also come with hook-and-loop keeper loops, to bundle the excess webbing up tight and out of the way for snag free utility.

The small Stick-It is perfect for stowing bulky times, like an Ops-Core bump helmet, a bundled jacket like the  Platatac Harry 1.2 Softshell or the like. It can easily cope with even larger items, as long as you're comfortable with the, sitting out over the top of its top lip. The construction is hefty, and I suspect the weakest point would be the clip on the buckle. I've never had any trouble carrying my every-day items, let me know if any of you try lugging a ammo-can with yours.

The Stick-It isn't usually available as a stand alone item, but can be found in the Mystery Ranch Gunfighter pack, or through Hornest.

Review: PowerPractical - Luminoodle

As first seen on Breach Bang & Clear ...

It might sound like a silly name, but the Power Practical Luminoodle is a serious product. At its heart, it's pretty simple. Take a 5-foot length of flexible circuit, string it with 26 LED's, give it a dual sided USB power plug, and sheath it in a waterproof case. Unlike a hand held flashlight, or a dangling lantern, having a flexible string of LED's means you can put a band of light where you want it, just where you want it and keep it there. That's what the folks at Power Practical have done. More than that, they put a fair bit of thought into how you'd actually use the thing.

I have a couple of other innovative pieces of kit from Power Practical; their power generating thermoelectric cook pot, the Power Pot XL, and a USB power regulator, the Practical Meter.

It's quite a nifty piece ...

Read the rest of my review on Breach Bang & Clear, here:

Review: Helinox Tactical Umbrella

My friends at HORNEST in Singapore sent me this Helinox product, and I've really enjoyed the Helinox Tactical chairs, which have accompanied me into snowfields and jungles, beaches and backyard cookoffs. So I was only too pleased to add some more Helinox products to my loadout. They are light, rugged, and portable.

The Helinox Tactical Umbrella is an ultra lightweight, yet highly durable take on the ubiquitous umbrella. Featuring a lightweight DAC aluminium pole at its center, which reminded me of one of my Easton Redline arrows and strutted with carbon fiber rods.

The canopy is teflon-coated polyester for superior water repellency and I put that to the test with some fairly heavy Melbourne summer rain, on several occasions. It worked really well, which was at first surprising given how small the umbrella is when stowed, being only 63.5 cm (25") long. The canopy boasts an UPF 25 rating (it blocks 96% of UV radiation)

It only weighs 210g (7.5 oz) but when opened up, it spreads to a broad full 100 cm (39.4") canopy.
At that size, and weight the Tactical Umbrella is light enough to bring anywhere, and keep ready to deploy when the skies open. Never go without protection from the elements again, with the Helinox Tactical Umbrella.

What makes it 'Tactical"? I suppose that's mostly advertising wank by the marketing team at Helinox, but then again, with its coyote brown finish, metal free design, and lightweight, compact design, you can forgive them their stretch. It also goes by "Trekking" and that name is more than fitting. I strapped this to the side of my backpack and whip it out when the skies open, it's out of the way until needed.

Being one piece and not folding like other "trekking" umbrellas, the design is both metal and mechanism free. There is no latch to break, no springs to jam or break, the tension of the canopy and the carbon fibre struts is perfectly designed and opens which a gentle slide of the strut-ring. It's held in place by a hook-and-loop closing strap, which even features a small loop field on the back side, to affix a 1" sized patch, perfect for a ranger-eye!

The closed cell foam grip and strap give you pretty good retention, especially important given the very breeze catching canopy, which is one of the things I've never liked about umbrellas. This handle however, along with its cord retention strap, is solid enough and robust enough that even Tactical baby can manage it in a breeze. The balance is really good, and whilst it's not long enough for me to use as walking pole, a shorter person could easily. It has a tip of the same closed cell foam as the handle, which makes it unsuitable for use as a walking stick over the long term, but does avoid the eye-poking risk that regular umbrellas may offer. This is a two edged sword however.

Having a soft tip makes it less able to be used as a damaging tool, in he way a hard spike ended umbrella might be able to, such as with the Unbreakable Umbrella. I found that by gripping the handle and choking up to the bottom of the canopy spars, it was possible to hold the closed umbrella like a baton.

A soft tipped baton, perhaps, but a baton. With the carbon fibre struts and the aluminium shaft at its centre, it's pretty rigid, and could be quite effective as a last-ditch defensive tool. I think it would stand up against a knife for long enough to make a break for it, or for a skilled user to use some hanbo or singlestick techniques as a defensive or even offensive tool.

Another aspect of the umbrella that I really likes comes from it's short handle, but broad canopy. It was possible for me at 193cm (6'4") on a tall day to scootch down and be almost entirely covered by the umbrella as I squatted. Consider this for both conceilability, by obscuring yourself under it directly, which could be supplemented by local foliage to form a hide of sorts. This also equates for use in its primary capacity as a shelter from the rain, it is entirely big enough to shelter under in a serious downpour you could drop down and almost entirely cover yourself.

For raingear, I usually opt for a boonie hat, poncho and maybe waterproof pants . However, I've been wearing the Helinox Umbrella slotted into my Mystery Ranch 1Day Assault Pack and have found it was easy to store and then deploy when needed. It worked really well, and I've had no regrets looking that extra bit like a Kingsman ... from a certain point of view, anyway.

Wish-Lust: Kickstarter - PACE lid

 I love modular and multi-purpose kit, and if I can get and everyday piece of equipment like a drink bottle to do double duty adds a significant thumbs-up from me.

This Kickstarter project, from GoRuck badass, and innovating outdoorsman, Chris Way.



This is the PACE lid, and it's Kickstarter is underway.

PACE stands for Primary, Alternate, Contingency, Emergency. When planning for events in life you have to expect that unforeseen things may happen and knowing this is empowering.

The container in the PACE lid is 300mL (10oz), it's deep enough for an ID or credit card as well as a variety of other gear.

The container is 7.6cm (3") in diameter and 5.7cm (2.25") inches deep. There's a small well around the perimeter that can secure items vertically and in place if they are bent, like cards, matches, other gear items. It's a feature Chris designed in and finds very useful in certain loading particular items in.

So far Chris and his team have tested the PACE lid and found it forms a water tight seal on wide mouth Nalgene, Klean Kanteen, Hydroflask, and MSR bottles.   I have a couple of Nalgene's so their perfect for me.

The prototypes seen here are apparently 3D printed, but the production models will be tooled plastics.

As well as the lids themselves, Chris is offering a pre-filled First Aid PACE, stocked with products from MedTraining Group, who specialize in non-permissive First Response fitting and training. 

If you're super keen, high-end backers can also get training and adventure time with the PACE team, so there are all kinds of benefits to backing this project, big or small.

For me though, it's all about the lids, and stowing my gear, wherever I go.

Be sure to check it out and hopefully, we can get it over the line.

Wish-Lust: ZyntonyRa light Strips

Ok, I was contacted by the people from Zyntony, who had launched a bad-assed light Kickstarter, and not had it make its threshold,  but they are back with a brand new product, that has already surpassed it's threshold, by 287% at time of writing, but I wanted to give them some more bandwidth with the info from their press-release.

Their new offering, the Zyntony Ra is a game-changing light for outdoor adventure enthusiasts that is designed to light up the entire area around you instead of just a spot in front of you.

At full power, Ra puts out 800 lumens of warm natural light. A pair of Ra attached to the shoulder straps of a backpack boast a staggering 1,600 lumens of light creating a “zone of daylight” around the wearer. “This is brighter than ten good headlamps”, one of the founders exclaimed in their release. He continued: “We named the light Ra after the Egyptian god who carries the sun across the sky because carrying one of these lights is like carrying a piece of the sun with you.”

I've covered similar strip lighting projects before, in the PackLight but the Ra is a step beyond.

Multiple mounting options enable Ra to be attached almost anywhere. The user can fix it to any ferrous object using the built-in rare-earth magnets. Ra can be attached to nearly any article of clothing using the accompanying magnetic backer strip, just by slipping the backer-strip under the outer-layer of clothing, and the Ra snaps into place magnetically. Using the D-ring strap and simple hook and loop ties, Ra can be fastened to virtually any piece of gear.

Each of the emitters can put out well over 500 lumens each. So in theory, the light could put out over 2,500 lumens. However, they are only running them at slightly over 1/4 power. Zyntony state they do this for several reasons:

First, is that the emitters are way more efficient - (in that they have a much higher lumens-per-watt output) at lower power. This means that you get a brighter light and longer battery life compared to a light that only has one or two emitters.

Second, by running them at lower power, their life is significantly extended to the point that they will virtually last forever (immortal buyers beware...).

Third, multiple emitters allow for each one to have a separate light dispersion pattern. This allows a less complex and more cost-effective way to balance light spread vs. throw, especially good given its area-effect design principle.

And fourth, by having multiple emitters running at lower power, you can spread out your heat dissipation, also especially useful if you're wearing it.


Ra is powered via a micro-USB input. Zyntony makes four different sizes of battery packs allowing the flexibility to carry just the power you need or as much as you want.

The Ra is designed to be lightweight to facilitate attaching it wherever you want so there is no internal power. It must be powered via USB. By connecting to a power pack via the USB, Ra has the flexibility where you can select a small BatPak for just the power you need or a larger one for as much power as you want. And you can connect up to three Ra's to BatPak II, BatPak III and BatPak IV. That flexibility supports a lot of different mounting options.

Zyntony are planning to certify the Ra to IPX7 which means it is submersible to 1 meter. It will certainly withstand the rain. The USB ports are the biggest challenge they are facing in this but by planning to use rubber boots/escutcheons on both Ra and the BatPaks, it should be waterproof as long as you use the Zyntony USB cable and power pack.

I'm really looking forwards to seeing what they can do when I get a set in-hand, but for mow, their on my wish-lust list!


https://www.kickstarter.com/projects/zyntony/ra-worlds-first-strap-light/description