Monday, February 18, 2013

Home front: vertical gardening



I have been wanting to make better use of the resources at my disposal for a while now, and grow more veggies at home. The problem being, we live in a very sandy location, and a lot of things that we like to eat just don't grow well. That or the possums, and snails, not to mention tiger slugs eat them before we get a crop out.


In order to avoid these pitfalls, and make better use of our bright sunshine, the water barrel I have out the back, and a lot of recyclable bottles I had had ready to go, I wanted to use the same kind of design as seen in a Kickstarter I backed in 2011 (but haven't yet seen) : Windowfarms.


The idea is pretty simple, plastic bottles, 1.25, 2 or 3L bottles, with the bottom cut off, have holes punched around the base, and then strung together in a stack.

Here is the top of my stack, and you can see the potting mix is already sporting some growth, sunflowers for Triceratops Girl.





I used just simple potting mix in my bottles, beccause it's what we had on hand from seedling planting to stock up the front veggie patches. I am hoping to keep building up our collection of these and get the most from the summer sun. I think a vermiculite substrate would be awesome but until I have a cheep source, its potting mix already-on-site for this project.

The line I used for these was the 2.4mm star sectioned trimmer line from Ryobi that I had on hand from my mostly unused line-trimmer. This thick, strong and sharp-edged line seemed ideal for stringing these up, bot for stability, but also giving the creeping vines something to hold onto, as well as possible deterring unwelcome mouths.

Below the sunflowers, are a mixture of carrots and onions. Yes,  I know that being root vegetables, hanging gardens will become packed with them, but my thought was to germinate and establish in the hangers, then transfer and replant as needed. All going well, I'll do this in the next batch of bottles we collect.


Next down the stack are daikon radishes.


Again, a big root vegetable that will need to be thinned out in order to get the best crop, but we go through a lot of plastic bottles, and I have lots of surfaces to hang vertical gardens from. One great thing about Daikons are that you can eat the leaves as well as the root, and both tops and bottoms pickle really well, which I hope to do with as much of the crop as I can manage to make successfully.

I strung the bottles before filling them, from top to bottom, knotting the trimmer line as I went and adjusting the tension to ensure that the spout of the bottles pointed directly down to the bottle below. Once filled with potting mix, I poured a quantity of water into the top bottle to moisten it, and add weight to gauge the tension. Some minor adjustments to the knots leveled everything up, and I loosened the cap, just enough to allow water to pour through, without being in danger falling off and washing my soil out.




After a few days of hanging and watering, without any catastrophic failures of bottle, cord or lids, I got the family together and we planted the seeds.

You can see in this shot that the sunward side of the bottles have developed a lovely green moss carpet, and there is a clear divide between the dry inch on top and the moist lower soils, even after 40oC days of summer sun here in Melbourne. This was a big test, and I'm pleased to say that not only is there life in these hanging gardens, that the system is sound. I only water the top bottle, every other evening or so, and each bottle below gets its fill, from the dribbling through from the bottom above.

The water than comes out of the bottom bottle is brown and peaty, so i know i'm loosing some nutrients along the way, but its hardly worth worrying about at this scale. I have a number of bottles of carp-based fertilizer  to bolster my crops, when it comes time to do so.




Here is the crowning (can you say this, when it's the bottom rung?) jewel of our hanging gardens, the peas.

We've tried growing sweet peas in the front gardens for the last few years, and have managed the sum total of three pods, before snails, slugs and possums have killed the plants. This time it will be different!

Our hope is that the peas will climb up the cords, and give us five sets of four cords worth of climbing pea-laden vines.

All in all, this was a really good project, the kids love looking at it, it made use of useless space, recycled materials on hand and otherwise being thrown out, and will hopefully start putting food on our plates in the next couple of months.

More planned, possibly with other crops, and I also have an old cargo strapping net to use as a watermelon vine trellis!


Saturday, February 16, 2013

Review: First Strike - Snatch Bag-ii

A running joke at our place is whenever I come home with a new piece of kit, i get asked "its not another BAG is it???" This isn't a bad thing, I get a lot of support about both my prepper leanings and my avid collecting of gear (hi all my peers at GHA). It is however a fairly regular occurrence that I will start waving a new piece around and get the grins and eye-rolls as I say "but this one is DIFFERENT..."

Having had a look at a couple of other items by Oscar Delta Special Products, namely their Deep Carry Tube and SERE V-cutter SnakeDr sent me one of their new Type II First Strike "Snatch Bag" bags, which I've been looking forwards to putting to good use.

I've been thinking about going for beach-runs and bushwalks with pretty minimalist gear (I know, this has usually meant a 10kg daypack of "needfuls" in the past) but a recyclable shopping-bag just doesn't lend itself to an active lifestyle. This is where a bag like the Snatch Bag come in.

Here it is folded up, small enough to fit in a Platatac FUP pouch for storage.



When unfolded, the 36cm (14") by 50cm (20") bag is really very spacious. Made from official Crye Precision LLC, MultiCam® in 500D Cordura material. It has also been given a waterproofing treatment to adds to its already a rugged and resilient construction. The internal seams are taped and triple stitched giving an extremely stable and strong bag for its weight.

The shoulder straps are really good, and multifunctional. Two 2.10m (7') strands of OscarDelta's very fancy SERE Go-Cord 960 (Hybrid Technora), also in Multicam. Even the stitched webbing shoulder straps are Multicam, for all over colour and pattern matching. Great attention to detail..

The nylon eyelets give a very strong, silent and stable feed for the straps to run through, without putting extra bulk, or unduly straining the corners of the pack, as a sewn-in strap might.

No hook-and-loop, no clinking metal. This is a lean, mean storage unit!
Internally, a rip-stop nylon divider panel gives you two separate compartments, without adding extra bulk,and you can see there are three green internal loops, (two in the edge seams, and a bigger on at the back of the lip. Loops like this give you attachment points for dummy-cord, karabiners or Grimlock clips, as well as a means to hang the pack as the need arises.

Here you can see a closeup of the heat sealed GO-Cord, along with the eyelet and the  ITW  Nexus twin-hole spring-locks which are a really simple, and unusual cord management system. I liked its elegance, and of course, it's metal-free.


The draw string closure of the bag is strong and dependable, having twin cords forming this really helps, and there is a feeling of dependability to it. The drawstring stitching is snug and held tight throughout some vigorous tugging and rough handling, even whilst loaded up.


Here is the load seen in the bag above, a "going for a beach-run for a few hours" pack. Perhaps too much stuff, but I'm notorious for that.

My CAOS admin pack, by Nulu Nylon Gear, Zombie Squad 1L Nalgene, a take-away container of food, my running shorts and shirt, and a Sea-To-Summit microfiber towel.

This probably doesn't represent a well-thought out "bug-out-bag" loadout, but it does represent one of the key elements of "snatch-bag philosophy". This is what I had on hand when I pulled out the bag to take photos, and needed to fill it up -right now-, in a "this, this, this, this and that" fashion. No messing around with intricate pouches and MOLLE pouches, just grab and move.

This bag does exactly what it is designed to, it is simple, stowable, deployable and comfortable to load up and get out there with. The over all construction is tremendous (although I did notice the shoulder-strap webbing edges were unfinished, perhaps this was done on purpose to add to friction, or maybe I was just lucky enough to get a rough-and-ready per-production model (I love those!).


Wednesday, February 13, 2013

Events: Tough Mudder #2 Melbourne 2013

 I ran the Tough Mudder again this year, January 19th, which was a lovely sunny, breezy day here in Melbourne.

The event was held at the Phillip Island Raceway again, which lays an hour and a three quarters drive from Melbourne, and backs onto the Bass Strait. I had only recently been given the all clear from the ankle troubles of late last year, and had not had a lot of preparation, baring three or four runs, of 2 - 5km, so I wasn't sure about how I would cope, not only with my ankles, or my general lack of CV fitness as a result of my injury, the prednisone treatment (25mg daily, dropping 5mg each week to wean away).

Regardless, I had booked in, and was raring to go. I had tried to drum up interest from the folks I ran with the previous year, but no takers (although it turns out, a couple did the event as it happens).

For those who don't know what the Tough Mudder is, it is a 20+km endurance challenge, with 25+ military inspired obstacles. The events run world-wide, in all conditions, and feature some signature obstacles, namely, lots, and lots of mud, electrical wire filled corridors, and pools swimming under barriers, ice filled pools and all manner of climbing, crawling, and of course, running. I hate running.


The above pics are me before the race, in my running kit, pretty much the same outfit that I wore for the previous endurance event I did, the Stampede with the First Spear OAGRE vest, with my Source 3L bladder in the back, and snap-fixed to the 5.11 Tactical TDU belt, keeping the vest snug to me and my TAD Amphibious Shorts with my trusty Blackhawk! kneepads, which were again, a real bonus, so, "i told you so" to all the scoffing runners out there. You can see me, fresh from the Arctic Enema/Chernobyl Jacuzzi ice bath and dunk, fishing a couple of ice-cubes out from my kneepads. I also wore my iPhone, in its SLXtreme case mounted in the Platatac PRR pouch I got specifically for the event. On my head I wore one of my caps, which I had modified to carry a picatinny rail, in order for me to mount my Contour GPS helmet-cam to, via the Strikemark adapter I have. I also added a chin-strap to the cap, to help deal with the added weight of the camera, which seemed to work pretty well. I wore one of the Under Armour t-shirts from the previous Tough Mudder and my Ironclad gloves.

I also swapped out boots, having put my Altama's into retirement and for this event, I wore my Bates Delta-8's which really held up well, and cleaned up tremendously.

Here's one of me having scaled a 2m "Berlin Wall" and torn my number off in the process. Lesson learned, bring my own safety pins or lashing system. Their little pins were ineffective!


This is me and my running-mate, #7819 :) doing the SHINBASHI salute after coming over the Bale Bonds.

She and I knew each other socially, and upon hearing my interest in a running-mate, signed up, regardless of trepidation and obstacle-shyness. Far better a runner than I, we kept a good pace, she kept me going on the straights, and I helped her along on the climbing, jumping and swimming, crawling and squelching.

She started the race with a black headscarf to match her all-black running slicks. I was referring to us as "day-ops" and "night-ops". My gear was already mud-coloured, and my head higher up, so don't think that I was getting away unscathed ...

We did the course in just under 4 hours, I felt that it was actually a lot easier this year, even without all the extensive running I did prior to the previous events. This may be in no small part to mental preparation, and experience. There were no "I haven't done it before" nerves. I made it over every obstacle on my own steam, climbed every wall, made it across the slippery monkey-bars, made it up the Everest half-pipe on my first run. I was rally pleased with not only my pace, but the speed I overcame the obstacles in my path, but also how I was able to help me fellow Mudders.



Here I am, following the event, having stripped off the OAGRE, sporting my celebratory headband, and working up the guts to pull my boots off. Not a blister, or scratch, but a lot of grit and muddy water. It turned out that the time-lapse application I had hoped to run on my iPhone hadn't begun, but the SLXtreme and PRR combination had worked like a dream. The Picatinny rail I had mounted the Contour cam on needed to be at more of a down-angle, I took a lot of 3/4 sky footage, but see below for my links.

I dinged my shin whilst hurdling a log, and gave myself this exciting bruise on the back of my left thigh. Last year I had two of these, one on the back of each thigh. This year I pegged the moment when I got it ... scaling one of the 4m Berlin Walls, lesson learned? major muscle groups do not make good leavers!

A great event, a good challenge, and certainly a good conditioning and preparation experience.

Will I do it again? hells yes. As many, and as often as I can manage.


http://contour.com/videos/watch/tough-mudder-jan-2013-1-1
http://contour.com/videos/watch/tough-mudder-jan-2013-1-2--6
http://contour.com/videos/watch/tough-mudder-jan-2013-1-4--3
http://contour.com/videos/watch/tough-mudder-jan-2013-1-5
http://contour.com/videos/watch/tough-mudder-jan-2013-1-6
http://contour.com/videos/watch/tough-mudder-jan-2013-2-1--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-2--2
http://contour.com/videos/watch/tough-mudder-jan-2013-2-3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-4--4
http://contour.com/videos/watch/tough-mudder-jan-2013-2-5--3
http://contour.com/videos/watch/tough-mudder-jan-2013-2-6
http://contour.com/videos/watch/tough-mudder-jan-2013-3-1
http://contour.com/videos/watch/tough-mudder-jan-2013-3-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-1
http://contour.com/videos/watch/tough-mudder-jan-2013-4-2
http://contour.com/videos/watch/tough-mudder-jan-2013-4-3
http://contour.com/videos/watch/tough-mudder-jan-2013-4-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-1
http://contour.com/videos/watch/tough-mudder-jan-2013-5-2
http://contour.com/videos/watch/tough-mudder-jan-2013-5-3
http://contour.com/videos/watch/tough-mudder-jan-2013-5-4
http://contour.com/videos/watch/tough-mudder-jan-2013-5-5
http://contour.com/videos/watch/tough-mudder-jan-2013-6-2


Tuesday, February 12, 2013

Wish Lust: Geigerrig Tactical Guardian hydration pack

Following on from this years SHOT show, I saw a link from the guys at Soldier Systems, reporting from the OR (I presume that stands for Outdoor Recreation, or something to that effect) on a really cool hydration system.

The Geigerrig comapny have a rather unique offering, with a pressurized hydration system. This system involves having a bladder with a hand pump (like the kind Dr's use to take your blood pressure on a elbow collar) to pump air into the bladder, squirting it out of the bite-valve.
This is the Guardian model, which I fell in wish-lust with ....
 It features a 2L (70oz) bladder (although they do offer a 3L bladder as well) which has fittings for drinking tube and pressurization tube which are both quick-release valved, and offers a slide-top for easy filling and cleaning. Skanky hydration bladders are no-ones friend!


Better yet, they have a variety of carriers for these bladders, all designed to contain the pressure, and give you a secure, continuous pressure water-source. 

The fabric of the carrier is a light and rugged 500D Cordura, with PALS/MOLLE strips on top and bottom, six D-ring attachment points for lashing it your pack, vest, plate carrier or what-have you, should you decide to forgo the built in (but stowable) pack straps. 

Twin compression straps add to the pressure and stability of your water-load, but the real magic here is the hard nylon "guardian plate" which backs the carrier. This was the real magic for me, as it offers something that I've noted was missing, a slick, hard backing to my hydration carrier. I am very happy with my Platatac Bravo but I found that when on Tough Mudder, crawling through pipes and under netting, and barbed wire, that it caught on occasion, as well as getting in and out of vehicles with it, a slick turtle-back would be a great advantage to both toughness, and drag-reduction.


Couple this with the in-line cyrpto and virus filters and you have a very resilient, functional pressurized hydration system. Hydrate, wash wounds, clean goggles all on the bounce, from a secured and armoured platform!

What's NOT to lust after?





Saturday, February 9, 2013

Home Front: Disruptive Thinking


Some recent events have spurred me to thoughts of preparation, self preservation and looking to become a little more self-dependent. The idea of thinking "outside the box" has always been very appealing to me. Doing the same thing, the same way over and over may work, but not having other means is a sure fire path to being caught out when situations change. Alternate strategies, and more than that, alternate thinking is required.
This patch is a great reminder of this, from SnakeDr and Last Ditch Kit and is a visual demonstration of how to overcome adversity, from new angles. Not being boxed in by expectations!

Disruptive thinking is another aspect of preparation that is often overlooked in the light of the shiny toys, kit and gear. In the event of disaster, a lot of common curtsey, and everyday thinking suddenly becomes fairly irrelevant. Getting in and out of places, getting away from threats, and facing them directly, these are all occasions where this is a distinct advantage. In my martial arts, one aspect of training is around the idea of concentration, and focus, and how to disrupt your opponents focus, and concentration. the kiai we shout, both acts to focus ourselves, but also to break and disrupt our opponent. The concept of seme of mentally putting pressure on your opponent is also key. Disrupt your enemies. Disrupt any opposition. And always, as this picture indicates ... know your exit strategy.


There is another aspect to all this. This is probably more in keeping with the rest of my blog thus far. Being prepared, being kitted out, and having a good stash of EDC gear, a cache of Bug-In supplies, a Bug-Out-Bag, or whatever, but without the nonce to actually DO something, when the need arises, it wont count for much.

This patch, from my friends at HORNEST bears their motto, Tempori servire meaning "adapt to the situation". One must always be flexible enough take advantage of the situation, to make best use of your skills, equipment and disposition, whilst at the same time

Disrupt your oppositions thinking.
Stay out of the Box.
Adapt to your Situation.







Thursday, February 7, 2013

Apocalypse Equipped Morale Patch

I'm really proud to announce that I have my own patches now available!


I previewed them in draft form a little while ago, and I have a batch of 200 just in from Platatac Custom Orders.

Expect to see a PayPal button some time soon, I'm looking at $5 including local shipping ... let me know what you think!

Wednesday, February 6, 2013

Review: Chicken nipples


No, there's no great punchline here ... just .... chicken nipples .... or perhaps better to say, "gravity-locking beak-activated water dispenser". Either way, these are some very cool additions to my urban homestead that has dramatically improved the hydration levels, and water quality that my chookens are getting.

These valves are sold by  the chicken keepers supply company CC Only as a part of their extensive poultry supply catalog. They have a wide variety of poultry farming supplies, but these little watering devices caught my eye after a post on the American Preppers Network.

The magic of the valve are the twin pins and ball bearing between them.

When screwed into place with the threaded end, the ball bearing and top-pin presses down on the top of the bottom pin, forming a seal. When the bottom pin is jiggled, it moves the ball bearing, breaks the seal, and allows a dribble of water to flow. Once the jiggling ceases, so does the flow of water.

The bottom pin has considerable freedom of movement which means that the chookens can poke and peck at it from whatever angle their little chooken heads come at it.

 In fact, within minutes of placing these out for ours to drink from, they had worked it out and have not gone thirsty since installing them.

This layout was my first iteration, which featured a simple clear bucket, without even a lid, but it did allow me to judge how much water was in it, to guage any leakage, as well as how much the chookens were drinking.

One of the things CC Only were quite clear on is ensuring that the connection was secure.



Drilling a hole in the bottom of the bucket was simple enough, and with a dab of pipe-sealant to close any gaps, the system was pretty easy to set up. The real trick is to ensure the hole is the right diameter, there is adequate material for the thread to bite into, and sufficient sealant to prevent dripping.

I have just recently replaced the plastic bucket with a repurposed baby-food tin with a lid, to stem evaporation and also to reduce the weight , as this big bucket got quite heavy to haul when full. Working with a metal base added a little more difficulty in the fitting, as it wasn't as forgiving as the plastic, but is a longer lasting solution.

These were a great addition to my urban homesteading venture, my chookens have had un-fowled water (hyuk-hyuk) and I think they are a little more entertained with having something to peck at for their water.
Related Posts Plugin for WordPress, Blogger...