As first featured on RecoilWeb.com here: the-ultimate-minimalist-everyday-carry-pen-edcpen
I was very pleased to be contacted by Kris of EDCpen who I've been following for a while, having missed out on his Kickstarter, but also by association with Brad of Tactical KeyChains, who has collaborated with Kris in the past.
Openly professing not being an engineer or product designer by trade, rather, Kris is a guy with a great idea. A former Infantryman and Paratrooper, who like me enjoys having a handful of EDC items which are practical and useful on a daily basis. Kris has gone the extra step, (in more way than one) and has produced a great item which I am pleased to share here.
The Kickstarter project that was produced to fund the production of these, and offered them in aluminium, brass and stainless steel. A later stretch goal brought forth a titanium option, which is what I was sent.
Fitted with a Fisher Space Pen cartridge the EDCpen gives a smooth writing action, and fits the hand snugly, even for a small pen, when unscrewed. You can see the threading and o-ring where the lid fits to the pen end, and the machined rings for grip towards the nib end. I found as a pen, this was a great fit, and haven't had any trouble using it. The ends feature similar fluted groves as those seen on the Ti2 Sentinel cache that Mike Bond puts out. I have a feeling there is a lot of collaboration between these guys, which is excellent, as it means there are awesome products coming our way.
The whole pen has been machined from solid titanium, with the cap having its lanyard loop cut deeply enough that there is no doubt that your cord would break before the loop, and the pen body itself seats the ink cartridge by having a countersunk threaded plug which screws in tightly behind the cartridge.
I can't imagine the situation in which this would come loose of its own accord in my use(perhaps being stuck in an engine casing) but it certainly didn't give me any worries. This thing really is designed to last a lifetime.I shudder to think what it would take to break this thing, and I'm confident that my body would go first.
I've covered a couple of "tactical pens" in the past, namely the S&W pen, and the CRL modular pen. The EDCpen is substantially heftier and hardier feeling than both.
It's solid construction, especially in titanium, give it a mass of 50g, ( 1 3/4oz) (53g with the included paracord loop), which outweighs the aluminium version of the CRL pen (at 42g) but as I said earlier, it sits nicely in the hand. The smooth finish of the pen lends again to it's heft and I found that the four fluted groves had just enough bite to their edges to give a good grip, without cutting in.
Why is this relevant? Because I always like to look at how I can use what I carry to combative purpose.
Having a 113mm x 12mm cylinder of titanium on hand just made me want to hit things, and I found that it most certainly does make an impression. These two divots were from one-inch-punch type strikes on a painted concrete wall. The pen didn't take even a smudge, the wall took two fairly impressive dents.
This was a great pen, and certainly worth adding to my EDC. It certainly lives up to its name. My only worry would be losing it, and with the included paracord lanyard, I've been able to have it looped through PALS/MOLLE, my belt loops and the like. This is a great example of someone taking a simple need, producing an elegant product and having a complete solution.
A place for me to review the various rugged, nifty and needful kit that I've accumulated, for every-day preparedness in the event of accident, disaster or world-shifting end-times Apocalypse, be it zombies, triffids or Mayan divide-by-zero errors.
Thursday, July 3, 2014
Monday, June 30, 2014
Review: Snow Lizard - SLXtreme 5 iPhone case
Attentive readers may recall the Kickstarter for the rugged, batter and solar powered phone case, the SLXtreme that I covered a while ago. You may also recall how I took it on the Tough Mudder twice last year but it didn't survive the second attempt.
The hinge cracked and I had some water leakage into the unit, temporarily shorting out my phone, and killing the unit. I was sad, because it was otherwise a great piece of kit, but I also realised that I had put it through a pretty arduous test for a phone case.
However, undaunted, when I saw that Snow Lizard had gone on to make a case for the iPhone 5 (which I had subsequently upgraded to) I got in touch with them to let them know that I was keen to put it through its paces, and they kindly sent me a replacement, in the form of the new and improved SLXtreme 5. In safety orange no less.
It features all the same aspects as the previous model: latch-locking top opening, press-button battery-check and solar power switch, 2,550 mAh battery, membrane speaker
and mic covers, rugged buttons for volume and "home" buttons, a lanyard loop, capacitive touch-screen membrane. It also sports a thumb-screw bottom sealing latch, and an access port for both USB charging and for the headphone jack. Forward and read-facing camera ports allows for photo and video capture and selfies.
There had been significant improvements as well.The in-built battery is 550 mAh larger in capacity over the "4" version.
The bottom access port is now tool-free access (even though previously all you needed was a coin), the main latch is now a two-part metal, rather than polycarbonate.
The most exciting new feature however was the headphone jack socket and adapter. With an o-ring sealed plug, and matching sealed adapter, it is possible to have the phone safely cocooned and waterproof, as well as having access to headphone and mic jacks, a feature I've missed since my yellow Walkman days
As with the previous model, the SLXtreme 5 is rated at IP-68 with an operational depth of two meters, so in theory you can take SLXtreme anytime you are in or around water. It doesn't float, however, so I kept mine well attached to myself with a lanyard of paracord. This "open" shot gives you an idea of the engineering used in this cases creation, and it certainly paid off.
having access to the USB port (not the Lightning port of the phone, mind) allows you to charge the phone and its built in battery, but not synch, as far as I can tell.
The main port includes optically clear and easy to clean lenses, padding and improved closing latches, as well as hinges, substantially stronger in design than the previous model, I was pleased to see.
The solar panel was also improved, with a more matte finish to the surface, and what looked to be improved collector crystals internally.
The finish and the feel of the case as a whole was a lot more refined, and with the extra metal hardware, and the changes to the bottom panel, I was really impressed with the design improvements the Snow Lizard team had put into the next model.
When I took the plunge, (so to speak), and took my phone in its new case into the warm waters of Fiji, I knew I was going to give it a good test. With its "2m" depth rating, I was trepidatious about how it would survive the trip, but as you can see, it worked wonderfully.
I had to remind myself a few times to use the buttons to control photo operation, as the main screen doesn't work under water, but I was able to switch between still and video controls on the surface easily enough, with just a flick of the wrist to clear water from the surface.
I found that the edges were a little tight, when dealing with water droplets, for dexterous screen manipulation, but the macro-control I needed worked just fine. The phone was bone-dry after almost an hour in the water (and subsequent jet-ski back to the resort), and the footage turned out really well.
All in all, I am thoroughly pleased with my replacement SLXtreme 5 case, and would highly recommend them to anyone who wanted to do some wet and wild filming, mapping, long distance phone calls and catching up on your favorite Apocalypse Equippedness blog from a beach-side or mountain-top retreat with their trusty iPhone.
The hinge cracked and I had some water leakage into the unit, temporarily shorting out my phone, and killing the unit. I was sad, because it was otherwise a great piece of kit, but I also realised that I had put it through a pretty arduous test for a phone case.
However, undaunted, when I saw that Snow Lizard had gone on to make a case for the iPhone 5 (which I had subsequently upgraded to) I got in touch with them to let them know that I was keen to put it through its paces, and they kindly sent me a replacement, in the form of the new and improved SLXtreme 5. In safety orange no less.
It features all the same aspects as the previous model: latch-locking top opening, press-button battery-check and solar power switch, 2,550 mAh battery, membrane speaker
and mic covers, rugged buttons for volume and "home" buttons, a lanyard loop, capacitive touch-screen membrane. It also sports a thumb-screw bottom sealing latch, and an access port for both USB charging and for the headphone jack. Forward and read-facing camera ports allows for photo and video capture and selfies.
There had been significant improvements as well.The in-built battery is 550 mAh larger in capacity over the "4" version.
The bottom access port is now tool-free access (even though previously all you needed was a coin), the main latch is now a two-part metal, rather than polycarbonate.
The most exciting new feature however was the headphone jack socket and adapter. With an o-ring sealed plug, and matching sealed adapter, it is possible to have the phone safely cocooned and waterproof, as well as having access to headphone and mic jacks, a feature I've missed since my yellow Walkman days
As with the previous model, the SLXtreme 5 is rated at IP-68 with an operational depth of two meters, so in theory you can take SLXtreme anytime you are in or around water. It doesn't float, however, so I kept mine well attached to myself with a lanyard of paracord. This "open" shot gives you an idea of the engineering used in this cases creation, and it certainly paid off.
having access to the USB port (not the Lightning port of the phone, mind) allows you to charge the phone and its built in battery, but not synch, as far as I can tell.
The main port includes optically clear and easy to clean lenses, padding and improved closing latches, as well as hinges, substantially stronger in design than the previous model, I was pleased to see.
The solar panel was also improved, with a more matte finish to the surface, and what looked to be improved collector crystals internally.
The finish and the feel of the case as a whole was a lot more refined, and with the extra metal hardware, and the changes to the bottom panel, I was really impressed with the design improvements the Snow Lizard team had put into the next model.
When I took the plunge, (so to speak), and took my phone in its new case into the warm waters of Fiji, I knew I was going to give it a good test. With its "2m" depth rating, I was trepidatious about how it would survive the trip, but as you can see, it worked wonderfully.
I had to remind myself a few times to use the buttons to control photo operation, as the main screen doesn't work under water, but I was able to switch between still and video controls on the surface easily enough, with just a flick of the wrist to clear water from the surface.
I found that the edges were a little tight, when dealing with water droplets, for dexterous screen manipulation, but the macro-control I needed worked just fine. The phone was bone-dry after almost an hour in the water (and subsequent jet-ski back to the resort), and the footage turned out really well.
All in all, I am thoroughly pleased with my replacement SLXtreme 5 case, and would highly recommend them to anyone who wanted to do some wet and wild filming, mapping, long distance phone calls and catching up on your favorite Apocalypse Equippedness blog from a beach-side or mountain-top retreat with their trusty iPhone.
Labels:
battery,
beach,
case,
iPhone,
movie,
SLXtreme,
snorkeling,
Snow Lizard,
solar,
swimming,
Travel,
water,
waterproof
Friday, June 27, 2014
Review: Mad Millie - Italian cheese kit
For Giftmas I was lucky enough to receive this very spiffy DIY cheese kit, good for over 10 batches of cheese (approx 6kg in total), as produced by "Mad Millie". This is the Mad Millie Beginners Italian Kit
With recipes and all the ingredients you need (apart from the milk) to make some of the following:
Fresh Italian Mozzarella and Bocconcini (approx 600g/batch),
Ricotta (approx 400g/batch),
Ricotta Salata (approx 100g/batch),
Burrata Mascarpone (approx 700g/batch).
I recently rediscovered the kit on top of the refrigerator and I had wanted to make mozzarella as my first attempt. We sourced some UN-homoginized milk (as some reading indicated that would work better) I got ready to make some delicious cheeze!
Included in the kit are the vegetarian rennet tablets (the enzymatic agent that causes the milk to coagulate), cheese salt (which is iodine-free, so as not to inhibit bacterial maturation), citric acid (to acidify the mixture, allowing the rennet to act more effectively), calcium chloride (to re-introduce calcium often lost in milk-processing) as well as the cheese cloth measuring pipette, and thermometer needed.
With my 2L of fancy un-homoginized milk, and the added backup of my fancy new digital Range iPhone thermometer I made my attempt, and ended up with ... ricotta.
After the process, which may have been less delicate than it should have been, I balled my finished product, and let it hang to drain off the last of the whey.
I ended up with a mass of cheese that yielded 450g, and I let it sit for a few days to settle, before breaking open my ball, and seeing what I had wrought.
It had been obvious in my preparation that the coagulation step didn't ever really happen. I had curds, but never the solid custard-like phase that needed cutting.
My mozzarella failed, but I ended up with a pretty decent, if crumbly, fetta type of cheese.
At this stage I am putting it down to poor technique on my part, and not the kit. Whist I am fairly confident that the temperatures and times were right, as I had the digitally controlled and timed Range to fall back on, I have a feeling that the initial combination of ingredients, and stirring may have been heavy handed on my part.
So whilst this first attempt certainly didn't result in the delicious creamy and plain ball of mozzarella that I had anticipate, I did manage to turn a volume of milk into a storable bulk of cheese.
I felt that it had sufficiently dehydrated to retard bacterial spoilage in the short term, and over the space of a few days, I broke it apart and sprinkled the product over a variety of dishes, like these patties.
I have successfully made cheese with this kit. Now to work out how to make the cheese I want to make.
With recipes and all the ingredients you need (apart from the milk) to make some of the following:
Fresh Italian Mozzarella and Bocconcini (approx 600g/batch),
Ricotta (approx 400g/batch),
Ricotta Salata (approx 100g/batch),
Burrata Mascarpone (approx 700g/batch).
I recently rediscovered the kit on top of the refrigerator and I had wanted to make mozzarella as my first attempt. We sourced some UN-homoginized milk (as some reading indicated that would work better) I got ready to make some delicious cheeze!
Included in the kit are the vegetarian rennet tablets (the enzymatic agent that causes the milk to coagulate), cheese salt (which is iodine-free, so as not to inhibit bacterial maturation), citric acid (to acidify the mixture, allowing the rennet to act more effectively), calcium chloride (to re-introduce calcium often lost in milk-processing) as well as the cheese cloth measuring pipette, and thermometer needed.
With my 2L of fancy un-homoginized milk, and the added backup of my fancy new digital Range iPhone thermometer I made my attempt, and ended up with ... ricotta.
After the process, which may have been less delicate than it should have been, I balled my finished product, and let it hang to drain off the last of the whey.
I ended up with a mass of cheese that yielded 450g, and I let it sit for a few days to settle, before breaking open my ball, and seeing what I had wrought.
It had been obvious in my preparation that the coagulation step didn't ever really happen. I had curds, but never the solid custard-like phase that needed cutting.
My mozzarella failed, but I ended up with a pretty decent, if crumbly, fetta type of cheese.
At this stage I am putting it down to poor technique on my part, and not the kit. Whist I am fairly confident that the temperatures and times were right, as I had the digitally controlled and timed Range to fall back on, I have a feeling that the initial combination of ingredients, and stirring may have been heavy handed on my part.
So whilst this first attempt certainly didn't result in the delicious creamy and plain ball of mozzarella that I had anticipate, I did manage to turn a volume of milk into a storable bulk of cheese.
I felt that it had sufficiently dehydrated to retard bacterial spoilage in the short term, and over the space of a few days, I broke it apart and sprinkled the product over a variety of dishes, like these patties.
I have successfully made cheese with this kit. Now to work out how to make the cheese I want to make.
Labels:
cheese,
food,
home front,
kit,
Mad Millie,
milk,
preserving
Wednesday, June 18, 2014
Review: 5.11 Tactical - Tarani CUB Master 2.0 Karambit
I am always pleased to be able to provide my loved ones with some cherished pieces of kit. My partner Omega was delighted to add a NukoTool Skully keyring to her keys, and last giftmas I was able to procure this beauty for her purse. She has a penchant for back-swept blades, and I wanted to get her something she would enjoy.
This is the 5.11 Tactical CUB Master 2.0 (Combat Utility Blade) which is part of their Tarani line. There is really something to be said for the claw like lines of the Philipino karambit and its simple functionality, even for something of an exotic design to Western sensibilities.
I was impressed with both the slight weight, at about 150g (0.35lbs) and easy size in the hand. The blade itself is only 7cm (2.87") long, which opens with an ambidextrous skeltonized opening in the back of the blade. An interesting feature of this knife is that the deployment is fully adjustable, by adjusting the tension in a spring-bar which is accessible by removing the scales. This is facilitated by the included TORX wrench, which was a nice touch.
The same wrench can also be used to flip the pocket clip from side to side.
The scales are made of FRN (Fiberglass Reinforced Nylon) which is a more flexible yet durable alternative to the more common G10. The grip is textured with the 5.11 logo, as well as three circular finger tip dips.Crenelations on both the inside of the handle and back of the blade allow further positive grip.
Equipped to enable both a blade up and blade down grip, the large reinforced retention ring typical of this type of blade, giving both pinkie or index finger grips. That ring allows both a retention, and lanyard attachment point as well as being a blunt impact tool.
The linear lock set into the back handle allows the return the S30V Crucible steel curved, scythe blade into its recess, and the clasp tension is directly related to the adjustable tensioner used for release of the blade. The short blade is not an issue given the particular style of use this kind of blade allows, and for the particular uses Omega uses it for.
The glare and corrosion eliminating Teflon finish of the blade only adds to its overall slick production. That evil claw of a blade makes up for lack of length with style and stealth.
As you can see, it works nicely as the backbone of an EDC tool-chain, with a WTF and Eat'n Tool on a baby carabiner on Omega's one.
This is the 5.11 Tactical CUB Master 2.0 (Combat Utility Blade) which is part of their Tarani line. There is really something to be said for the claw like lines of the Philipino karambit and its simple functionality, even for something of an exotic design to Western sensibilities.
I was impressed with both the slight weight, at about 150g (0.35lbs) and easy size in the hand. The blade itself is only 7cm (2.87") long, which opens with an ambidextrous skeltonized opening in the back of the blade. An interesting feature of this knife is that the deployment is fully adjustable, by adjusting the tension in a spring-bar which is accessible by removing the scales. This is facilitated by the included TORX wrench, which was a nice touch.
The same wrench can also be used to flip the pocket clip from side to side.
The scales are made of FRN (Fiberglass Reinforced Nylon) which is a more flexible yet durable alternative to the more common G10. The grip is textured with the 5.11 logo, as well as three circular finger tip dips.Crenelations on both the inside of the handle and back of the blade allow further positive grip.
Equipped to enable both a blade up and blade down grip, the large reinforced retention ring typical of this type of blade, giving both pinkie or index finger grips. That ring allows both a retention, and lanyard attachment point as well as being a blunt impact tool.
The linear lock set into the back handle allows the return the S30V Crucible steel curved, scythe blade into its recess, and the clasp tension is directly related to the adjustable tensioner used for release of the blade. The short blade is not an issue given the particular style of use this kind of blade allows, and for the particular uses Omega uses it for.
The glare and corrosion eliminating Teflon finish of the blade only adds to its overall slick production. That evil claw of a blade makes up for lack of length with style and stealth.
As you can see, it works nicely as the backbone of an EDC tool-chain, with a WTF and Eat'n Tool on a baby carabiner on Omega's one.
Monday, June 16, 2014
Events: exoskeletons in the news and on screens
Ever since seeing the Power Loader in Aliens, and reading Heinlein's Starship Troopers accounts of the MI Cap Troopers powered suits, I've been fascinated by the idea of powered exo-skeletons and wondered when they would become a reality. The time is now.
I was shown this link recently, of Eythor Bender of Berkeley Bionics bringing two amazing exoskeletons onstage, the HULC and eLEGS. The HULC is a military power-loader type affair, made by Lockheed-Martin and is human wearable, assisting and enhancing a ground soldiers ability to haul gear and kit. The eLEGS from EKSO Bionics are designed to give paraplegic people assisted walking. Both suits have the same lineage and show how the technology we have currently available is moving.
Just this week the symbolic kickoff of the World Cup was performed by a paralyzed, previously wheelchair borne person wearing a similar suit. What makes this so significant is that unlike the HULC suit, and other motor-muscle actuated feedback systems, it was controlled by readings from an EEG cap that sends readable nerve of impulses to systems which then drive the hydraulics strapped to their legs. The system "reads the mind" of the wearer and allows them to, at this stage, stand from sitting, walk forwards and return to sitting.
I lost a friend to motor-neuron disease a number of years ago, and it was tragic to see this pillar of a man gradually loose every function but his wits. Something like this might well have helped him for a time. There are plenty of people with acquired paralysis, be it road-accident injury or combat related, who could benefit from this kind of suit.
We even have an example of this kind of thinking in the movies, in Elysium, where the protagonist is fitted with (albeit in a very visceral, literally bolted on medical way) an exoskeleton. Part prosthetic, part combat-accessory, the suits in Elysium offer a very realistic representation of how this kind of technology might develop, not unlike the visions offered by Cyberpunk 2.0.2.0 roleplayings Linear Frames and more recently the powered combat suits that feature in Edge of Tomorrow.
How might these fall into more common usage? Well, apart from medical recovery, and military operations, you could also expect to see this kind of technology in heavy industry, rescue and emergency services, any place that you might want either more power or stamina than a regular person might be able to muster, but less space or more maneuverable than a forklift, or with more autonomy than a wheelchair offers.
Imagine if the rescue workers at an earthquake downed building wore something like these? Firefighters at the scene of a 3-car collision? A trooper who took a piece in the back?
The real ticket will be how light they can make them, how long they will remain powered for and in the end, how much they will cost. There was a time when owning a car was outside the scope of most households, or even a wheelchair. The ReWalk is already a consumer item. Can't be long until Caterpillar bring out a bright yellow Xenomorph squisher...
We have the technology, we can improve it!
I was shown this link recently, of Eythor Bender of Berkeley Bionics bringing two amazing exoskeletons onstage, the HULC and eLEGS. The HULC is a military power-loader type affair, made by Lockheed-Martin and is human wearable, assisting and enhancing a ground soldiers ability to haul gear and kit. The eLEGS from EKSO Bionics are designed to give paraplegic people assisted walking. Both suits have the same lineage and show how the technology we have currently available is moving.
Just this week the symbolic kickoff of the World Cup was performed by a paralyzed, previously wheelchair borne person wearing a similar suit. What makes this so significant is that unlike the HULC suit, and other motor-muscle actuated feedback systems, it was controlled by readings from an EEG cap that sends readable nerve of impulses to systems which then drive the hydraulics strapped to their legs. The system "reads the mind" of the wearer and allows them to, at this stage, stand from sitting, walk forwards and return to sitting.
I lost a friend to motor-neuron disease a number of years ago, and it was tragic to see this pillar of a man gradually loose every function but his wits. Something like this might well have helped him for a time. There are plenty of people with acquired paralysis, be it road-accident injury or combat related, who could benefit from this kind of suit.
We even have an example of this kind of thinking in the movies, in Elysium, where the protagonist is fitted with (albeit in a very visceral, literally bolted on medical way) an exoskeleton. Part prosthetic, part combat-accessory, the suits in Elysium offer a very realistic representation of how this kind of technology might develop, not unlike the visions offered by Cyberpunk 2.0.2.0 roleplayings Linear Frames and more recently the powered combat suits that feature in Edge of Tomorrow.
How might these fall into more common usage? Well, apart from medical recovery, and military operations, you could also expect to see this kind of technology in heavy industry, rescue and emergency services, any place that you might want either more power or stamina than a regular person might be able to muster, but less space or more maneuverable than a forklift, or with more autonomy than a wheelchair offers.
Imagine if the rescue workers at an earthquake downed building wore something like these? Firefighters at the scene of a 3-car collision? A trooper who took a piece in the back?
The real ticket will be how light they can make them, how long they will remain powered for and in the end, how much they will cost. There was a time when owning a car was outside the scope of most households, or even a wheelchair. The ReWalk is already a consumer item. Can't be long until Caterpillar bring out a bright yellow Xenomorph squisher...
We have the technology, we can improve it!
Saturday, June 14, 2014
Review: Gearward - 24HSD glow tag
I saw these come up in one of my reader feeds, and saw that there was controversy about them, but felt I should check them out myself rather than just take a knee-jerk response.
I'm a big fan of both glow-in-the-dark kit, and signalling in general, and thought it would be worth your time and mine to cover an item such as this.
This is the 24 Hour Signal Device by Gearward, and it's a no frills day/night signalling tool.
You may recall the SAR Eclipse Signal System I covered ages ago, and also the SAR MoonGlow disk. This product is in some ways like a combination of those two systems.
Combining a slab of the same moonglow plastic as in the SAR disks, and the terminatorized NukoTool ACDT and a mirror finished chrome tag which acts as a signalling mirror. It came bundled with a strip of ranger-band and a braided, waxed cord.
Both tags are in standard dog-tag size and shape and are drilled with a hole to use as a helioscope for signalling, much like the inner segment of the SESS-c.
Still, whilst it has many similar features, these are quite different products, and I have added this to my collection of EDC alongside the SAR systems and the similar, glowy UVPaqLiteUVP products.
I have added my 24HSD as a fob for my phone, seen here in its Strike Industries SHOX case.
I'm a big fan of both glow-in-the-dark kit, and signalling in general, and thought it would be worth your time and mine to cover an item such as this.
This is the 24 Hour Signal Device by Gearward, and it's a no frills day/night signalling tool.
You may recall the SAR Eclipse Signal System I covered ages ago, and also the SAR MoonGlow disk. This product is in some ways like a combination of those two systems.
Combining a slab of the same moonglow plastic as in the SAR disks, and the terminatorized NukoTool ACDT and a mirror finished chrome tag which acts as a signalling mirror. It came bundled with a strip of ranger-band and a braided, waxed cord.
Both tags are in standard dog-tag size and shape and are drilled with a hole to use as a helioscope for signalling, much like the inner segment of the SESS-c.
Still, whilst it has many similar features, these are quite different products, and I have added this to my collection of EDC alongside the SAR systems and the similar, glowy UVPaqLiteUVP products.
I have added my 24HSD as a fob for my phone, seen here in its Strike Industries SHOX case.
More glow is good glow, as far as I am concerned. The big solid block of glowing plastic gave me many hours of illumination, both enough to find my phone, but also to navigate my keys and wallet contents in a dark room. I found it too bulky for me to add to my already prolific neck decoration collection, where as the SAR disk fits nicely there, but if just adding to an existing dog-tag, for example, it might well be just the ticket.
Wednesday, June 11, 2014
Wish Lust: KickStarters - RECON 6 Watch & KLAX
From time to time I either get forwarded, or read about some great ideas going on via Kickstarter, or other crowd-sourcing sites, and I want to boost their signal to help them out, as well as getting some gear ideas out to you folks ....
check these two out...
From the creator of the Crovel Extreme comes this jam-packed survival watch.
In his words:
*******************
The most multifaceted utility watch you'll ever own. Life in
the great outdoors is no fashion show, but there is a tough and rugged
accessory I am getting ready to launch that not only lets outdoorsmen
make like Grylls, but could also save your life. I created the Recon 6
Watch to tackle the unexpected and perform multiple tasks. Inspired by
the desire to always be prepared, a cross between the Swiss Army Knife
and MacGyver will take this multi-featured watch to a whole new
level. After months of hard work, my idea is almost ready to become a
reality.
As well as a bezel equipped, phosphorescent handed and anti-chip and glare faced watch, it also features the following survival components
- Multi-Tool
- Blade with sheep hook design for dressing out small game
- Bottle opener
- Can opener
- Fire striker
- Signaling mirror
- Fire starter good up to 5000 fire starts
- Aluminum rescue wistle
- 25 ft. of braided fishing line with 2 small fish hooks
- Magnifying glass
- EMP proof, liquid fill compass
- LED flashlight
*******************
Hefty, and with a price tag to match, but packed with content....
Then there is the father-son team behind the quite innovative multi-tool, survival axe, which I have my eyes on.
In their words:
*******************
The KLAX is a multi-tool built into the head of an ax. It allows you to attach the ax head to a handle quickly in the field. It uses the nested clamping system shown here. The clamps rotate out from the handle for use.
The KLAX is designed to be a short term solution to many of the problems that you could face either planned or unexpected. It will help you to get through situations where carrying a full set of dedicated tools is just not possible or realistic. Here are a few examples...
- stuck on the roadside in the backwoods and need to build a lean-to for shelter
- injured hiker needs an impromptu travois (stretcher) to be carried to safety
- hiking and need enough wood for a small cooking fire
- hunting and want to make small game traps
- forgot the hammer and need to pound in the tent pegs
- starting the split on a small log without many knots
- need to dig a hole (let's see your multi-tool do that)
Bottom Line: If you think it is trying to replace your full-sized dedicated tools for everyday use, you won't be happy with the KLAX.
KLAX-Lumberjack Our high-end stainless steel model with the most features. The first three models are all made from heat treated SUS420J2 stainless steel which is perfectly balanced for keeping an edge and maintaining strength.
KLAX - Woodsman Our mid-level stainless steel model with just the more useful features.
KLAX - Feller This is our more rustic model with just the basic features you need in the outdoors.
Ti-KLAX is a Titanium version of the KLAX – Lumberjack and comes with all the same features, but because it is made from more expensive Titanium, it weighs only half as much as the Feller and is stronger than steel. The Ti-4452813 titanium is also anodized to provide some eye catching highlights.
*******************
So, some pretty cool concepts there ....
I wish I could back them all, but we'll see, and perhaps I'll get to show them off in good time.
check these two out...
From the creator of the Crovel Extreme comes this jam-packed survival watch.
In his words:
*******************
RUGGED AS IT IS USEFUL:Recon 6 Watch is the Baddest watch around: Compass, Signal, Can Opener, Fire Starter, Whistle, Cutting
Tool!
As well as a bezel equipped, phosphorescent handed and anti-chip and glare faced watch, it also features the following survival components
- Multi-Tool
- Blade with sheep hook design for dressing out small game
- Bottle opener
- Can opener
- Fire striker
- Signaling mirror
- Fire starter good up to 5000 fire starts
- Aluminum rescue wistle
- 25 ft. of braided fishing line with 2 small fish hooks
- Magnifying glass
- EMP proof, liquid fill compass
- LED flashlight
*******************
Hefty, and with a price tag to match, but packed with content....
Then there is the father-son team behind the quite innovative multi-tool, survival axe, which I have my eyes on.
In their words:
*******************
The KLAX is a multi-tool built into the head of an ax. It allows you to attach the ax head to a handle quickly in the field. It uses the nested clamping system shown here. The clamps rotate out from the handle for use.
The KLAX is designed to be a short term solution to many of the problems that you could face either planned or unexpected. It will help you to get through situations where carrying a full set of dedicated tools is just not possible or realistic. Here are a few examples...
- stuck on the roadside in the backwoods and need to build a lean-to for shelter
- injured hiker needs an impromptu travois (stretcher) to be carried to safety
- hiking and need enough wood for a small cooking fire
- hunting and want to make small game traps
- forgot the hammer and need to pound in the tent pegs
- starting the split on a small log without many knots
- need to dig a hole (let's see your multi-tool do that)
Bottom Line: If you think it is trying to replace your full-sized dedicated tools for everyday use, you won't be happy with the KLAX.
KLAX-Lumberjack Our high-end stainless steel model with the most features. The first three models are all made from heat treated SUS420J2 stainless steel which is perfectly balanced for keeping an edge and maintaining strength.
KLAX - Woodsman Our mid-level stainless steel model with just the more useful features.
KLAX - Feller This is our more rustic model with just the basic features you need in the outdoors.
Ti-KLAX is a Titanium version of the KLAX – Lumberjack and comes with all the same features, but because it is made from more expensive Titanium, it weighs only half as much as the Feller and is stronger than steel. The Ti-4452813 titanium is also anodized to provide some eye catching highlights.
*******************
So, some pretty cool concepts there ....
I wish I could back them all, but we'll see, and perhaps I'll get to show them off in good time.
Subscribe to:
Posts (Atom)