Review: Hardcore Hardware Australia - LFK01

Every now and then my out-doorsy/quasi-military aesthetic meshes with that of my very stylish partner, Omega and there will be "oooh's" and "aaah's" over the same things. A good example of this would be my prototype Urban Dax pants, or the Nukotool TiGBi skull-keyring I acquired for her birthday last year.

In keeping with the close personal defense theme,  when popping in to Platatac to shoot the breeze one weekend, with Omega and Tactical Baby along for the ride, I casually pointed out the pointy-cabinet to her, and was thrilled when she singled out this beauty from Hardcore Hardware Australia, their LFK01I took note, and months later, presented this one to her.  

HHA are a local company, who state that their "primary function is to design, develop and construct mission specific tactical tools for Military, Law Enforcement, Fire, Search & Rescue personnel". 

My kind of makers!

The LFK01 is a wicked Recurve trailing point fixed blade, a format that especially appeals to Omega, and in this case, there is plenty of substance to it. Measuring 168mm in overall length, with 70mm of blade, this little piece is designed to fill the gap between a full sized fixed blade, and a folder.

Weighing in at 180g, this is a dense little knife, and a lot of that mass comes as a result of the bulk of the knife being 6mm D2 tool steel. D2 is a high chrome content steel, which HHA note is sometimes called "Semi-stainless", has excellent edge holding capabilities and extraordinary wear resistance. They heat treat the blades to bring the hardness to 56-60HRC, which is given a Teflon coating to reduce any corrosion that might occur, as well as reducing glare and the maintenance required for it. A thin coat of oil is all HHA recommend if it is stored or exposed to wet environments.

Here is a good shot of the blade, showing the thick body, with its broad, 44mm grind. This is a blade that is no nonsense, and will take all the punishment you could dish out. Its heft reminded me more of the KA-BAR Zombie Killer Tanto than any other blade in my own collection.

The spine of the blade features some subtle crenelations, giving ample purchase for a thumb-grip, without catching or digging either your hand, or on your gear, when worn.

Between these two pictures you can see the profile it gives in the hand, as well as the aggressive angle it sits in. This is a blade that will make a mark, and leave a lasting impression, without having to give itself away unnecessarily.

A Mil-C-5040H Type III paracord wrapping give very strong positive gripping, and adds shock-resistance (although with a knife this size, I cant imagine you would get much impact shock.

The cord is treated with a proprietary acrylic solution to keep it in place, tidy and clean, but apparently wont interfere with using the cord in a survival situation. Great logic guys! The pointed pommel can also be depended on to leave a lasting impression.

The very hungry edge is constrained in a two part carry system. A 100d Cordura outer which includes in the back a MOLLE attachment system, with one channel worth of press-stud fixing tab in place. The inner layer is a folded Kydex insert, and is designed to allow ambidextrous wear of the blade.

This is further facilitated by the central placement of press-stud retention webbing, which allows the blade to be seated left or right, facing up, or down. I fed some paracord through the provided eyelets, and with a cord-lock, quickly converted this into a neck-knife for Omega to wear out and about. Quite the talking point at some of the more exciting events we attend.

This is a beautiful, brutal piece, thoroughly efficient, uncompromisingly rugged, and everything I could hope for in a gift for a loved one.

Review: Griffin - Mossy Oak Survivor iPhone case

One of the contacts I made whilst at the SSAA SHOT Expo was Peter Ferrigno of Griffin Technology, who showed off one of their pretty hard core iPhone cases. I've covered a couple of cases before, in the Snow Lizard SLXtreme case and the Opt Silicone Armor case.

Being a Sporting Shooters type event, Griffin was displaying the Mossy Oak variant of their Survivor range, Peter was kind enough to send me one to have a play with.  This is a three part case, which Griffin report being compliant to MIL-STD 810G standard.
 
Griffin demonstrations for this case include imbedding it in a block of concrete and hammering it free, which is pretty impressive. The three components of the case are the main body, the removable face-plate, and the belt clip.Here's how the whole case it put together:

The outer cladding is made of shock and vibration-absorbing silicone, whilst a polycarbonate shell provides the outer structure and is also the patterned component, for your Mossy Oak needs.

Inside the outer cladding, the inner structure is again the hard polycarbonate plastic providing inner support and is backed up with foam padding to add to the internal shock absorbance.

A scratch resistant polycarbonate screen cover clips into the main outer cladding at six points to lock into place.






The belt clip attaches via two clasps that lock onto the top and bottom of the phone, and will work either way up, to suit your tastes and how you wear your rig.

You can see here that the back panels of the phone have a couple more polycarbonate sections with the Mossy Oak pattern showing through. You can also see the clever swiveling camera port, which is inset into the backing.

These ports follow the same pattern for all the access points of the camera, and whilst they don't offer submersion-level protection, I imagine that they would shrug off anything but total immersion. This is a weather proof case with a lot of thought put into the needs of the outdoorsman.

Each of the audio port, mute-switch and power socket ports are covered with a thick, snug fitting silicone plug, hinged and deeply set, almost difficult to open, so no risk of accidental exposure.

 I found the home button a little tricky at first, as it needs a good solid press to activate, but once I have the angle down pat, it was a breeze to operate.

The polycarbonate screen protector was really responsive, and tactile, which was a nice change from the somewhat sluggish response from the SLXtreme case, even with a film screen-guard on my iPhone. The audio was pretty clear, both receiving and making calls, and the front facing camera still worked fine for all my tacticool selfies.

The belt clip deserves some more description too. Fully swivel-able, in stiff slicking fashion, the clasp itself has a latch over the opening end, to lock it closed, to prevent accidental un-clasping when you are belly crawling in the wilderness. It also will lock open, and back, to create a stand, which is a nice addition.


 The all-important PALS/MOLLE test was a great success, and showed that not only did the tongue of the clip fit into the channels nicely, but that it could be swiveled in place for optimum viewing angle, and detached from the backing for use easily, and replaced just as easily.

The biggest drawback I had with the case was that the power socket plug was too small for me to dock with either my in-car music/charger or my desktop docking clock-radio. However, when I was out and about, this wasn't really an issue.

Being a clip-on cover, and the way the access ports close, this isn't a submersible case, which means I wont be strapping it to my chest on my next Tough Mudder, but it IS really weather resistant, which means I can keep using my phone in Melbourne's inclement weather, and not worry about shirting it out.

All in all this is a very rugged and hard wearing feeling case, and I have no doubt that I could hand it to any of my kids and expect to get it back fully functioning, if a little sticky. Perfect for distracting them when taking out zombies or triffids in the front yard!

Home Front: Atamai Eco-Village

 An old friend of mine dropped me a message, from his side of The Ditch to remind me that his home would make an excellent example of Apocalypse Equipped living. He is one of the members and developers of the Resilient Community at Atamai Village.


I, like my Viking ancestors, have pillaged their website and Facebook page to gather all the content below,  so all credit to the creators and writers.

What I liked most of all about this whole idea was the planning and conscious decisions made in its development. I think these folks have put a lot of time and effort into not only being self-sufficient, not only for food and resources, but also in the maintenance, development and management of their site.

Craig assures me that being a hard worker, in the event of zombies, all i need do is fight my way over the Tasman, baby on my back, and i'll be welcome. If it were not for the entanglements of lovers and children in Melbourne, he'd have already been giving me the hard-sell to move over. I'd be tempted too ....

*************************************************************************

A Permaculture Designed New Zealand Eco-Village

Located within biking distance to Motueka, a small town in the northern part of New Zealand’s South Island, the village’s land provides attractive and comfortable housing sites of mixed sizes for 50+ families.
Details on sections for sale now, can be found here. You can contact us via our website form.
A village is a settlement where people move from the privacy and separateness of their individual homes and families to their daily exchanges with others – all within the village and its environs. These are exchanges for basic needs such as food and other goods, social exchanges of support and mutual interest, cultural exchanges for fun and enjoyment, exchanges where projects are planned and carried out with others, a place where goods and services are exchanged to the benefit of both parties.
Village life is filled with opportunities for exchanges with a deeper texture, where the depth and breadth of relationships is enriching at many levels; where the joys and tribulations of a full life are felt and shared. Village life involves a sense of place and connectedness – to the land and the people – where relationships to both are rich and mutually sustaining.


A village operates on a human scale

• where people know the land and each other
• where that knowledge translates into caring and support for both
• where people pay attention to the local because they depend on it for their well-being
• where there is a connection to the broader world, but where that connection is based on fair exchange rather than dependency.

Physical Infrastructure

Common Resources

A key feature of most traditional villages is land owned and managed collectively. This feature has been incorporated into the Atamai design. Most of the land already developed, or that remains to be developed, will be part of the Commons Resource that the developer transfers to Atamai Village Council (the body that owns and governs the commons resources). The Commons Land already consists of approximately 10 ha and approximately 25 ha will come into the Commons with the second stage of development.
This common land is a critical feature of Atamai's food production and more. Such lands under community control can be used to generate income for the village by renting or leasing parcels of land or specific rights (e.g. grazing) over parcels of land to villagers or other parties. Exactly how these commons resources will be used will be determined by villagers rather than the developer.
The common resources are owned collectively by all villagers.

Permaculture Features

Atamai Village is designed on permaculture principles. All freehold titles have been chosen to ensure a favourable solar aspect and enough space for at least a vegetable garden and orchard areas. Some sites are suitable for raising livestock of various sorts. Wind and water features have also been taken into account, and the entire site is adjacent to a forestry block which is being transformed into a sustainable forestry operation.
Permaculture principles are also being used to develop all Commons land to be owned and managed by Atamai Village Council.
These permaculture features are one component of a secure food supply, by optimizing the availability of productive land, and where appropriate, creating microclimates for special purpose growing.

Access and cycle ways

A large portion of Atamai Village will be car free, with access and cycle ways designed to connect various parts of the Village. All access and cycle ways will have a grade of no more than 1 in 10 to ensure ease of access by walking or cycling. When necessary, small electric vehicles can be used to move goods or people. All access ways will also be large enough to accommodate emergency vehicles.
These features will reduce our reliance on fossil fuel transport, and facilitate ease of movement when energy descent becomes more prominent. They will also make Village areas safer and more accommodating to people-scale activities, thus facilitating social interaction and a sense of community.

Building Design Guide

An extensive Building Design Guide has been prepared to describe the standards for all buildings within the village. This document addresses such issues as passive solar house designs, use of non-toxic, sustainably sourced local materials, on-site energy production, waste handling requirements, and related items.

Building Covenant     

We believe these design features are so important that a covenant is placed on each title that ensures the goals of sustainable buildings will forever occur on each dwelling site. So you can be sure that village buildings will follow these guidelines, and enjoy their long term benefits – an important part of a resilient community. 
These standards ensure that buildings will be comfortable and inexpensive to operate on an on-going basis, have a low ecological footprint, and be safe to live in. The first home built according to these guidelines is now in place.                          

Clean Land Covenant

All land within the village will be covenanted to ensure that nothing will be done to the land that would prevent that parcel of land from being BioGro Certified. This same guideline applies to both individual freehold titles and all Commons land. The guideline does not require that each land parcel become BioGro certified, but only that nothing is done to it that would prevent such certification.
Atamai and related parties also have control over almost the entire catchment area for Village lands.
These features ensure that no pesticides or other toxic materials will be used on any of the lands under village control, providing a safe and healthy environment for growing food and enjoying our natural surroundings. These features will also enhance the biodiversity potential for both fauna and flora throughout the village lands.

Water Security

One of the standards in the Building Design Guide specifies two 24,000 l water tanks for each dwelling and a roof-top collection system for domestic and garden use. Separate tanks for fire protection elevated about dwelling height are also part of the plan, and some are already in place. In addition, there are several ponds now constructed, and more to come, as well as several areas where super-wells are options should they be needed. With the local annual rainfall of approximate 1000 mm, these measures should provide adequate water security for villagers.
The rainwater collection, ponds and wells collectively provide a resilient water system to meet village needs for the foreseeable future; these measures take into account the predicted changes based on altered rain patterns induced by climate change. The ponds also provide opportunities for recreation and aesthetic enjoyment.

Food Security

Each title provides areas for a veggie garden and some food bearing trees. Some sites are also suitable for raising livestock. Options are also available to use part of the Commons for livestock or additional food production. A community orchard was established in 2007 which is now coming into production. The orchard area, along with land for community gardens, has already been transferred from the developer to Atamai Village Council. To supplement these village food producing areas an adjacent 24 ha farm operation is being established by one of the first villagers, with the objective of supplying bulk and specialty crops for the village and beyond.

Topsoil from each site has been carefully removed during excavation and then reapplied to the site. None of the land was previously used for industrial type agriculture (e.g. tobacco, etc).
The water features of the village layout are another important resource for food production.
These soil and water features are supplemented by the region’s record high sunshine levels to provide ample opportunity for each villager to produce their own organic and locally sourced food, or purchase it from another villager. Having these vital resources under direct village control (individually or collectively) provide a degree of resilience hard to match elsewhere.

Dealing with Waste

The building design standards also include a provision for each building to deal with its own waste on site. Recommended solutions include various grey water drainage systems and composting toilets. There are various versions of both to match the circumstances of each household.
Handling human waste in this fashion avoids contaminating other areas and also provides a valuable resource for the orchards.

Social Infrastructure

In addition to being responsible for the physical infrastructure of the village, the developer has also provided for some basic social infrastructure components to support village activities.

Atamai Village Council

The developer established Atamai Village Council as an Incorporated Society to own and manage the village common resources. This entity provides a basic legal structure for ownership of common resources and a means of managing them. It has been operating since 2010.

Consensus Decision Making Covenant

Village life is about more than just sharing the physical assets of the Commons - it covers all facets of human interactions and therefore has some predictable features. Owning and managing the Commons Resources will require a decision process that will benefit from both wisdom and broad support. Consequently, a Consensus Decision Making Process is included as one of the key covenants placed on each freehold title. All villagers are expected to participate in training regarding this process and to support its use in making decisions as part of Atamai Village Council.
Atamai Village Council has been functioning using this model since 2010.

Conflict Transformation Covenant

A second social covenant that goes on each freehold title deals with Conflict Transformation. It is inevitable that conflicts will arise in any collective human endeavour so it is best to have agreement on a constructive way of dealing with them when they do. This covenant deals with villagers training in conflict transformation techniques and committing to using these approaches when conflict occurs. Supportive mediation is part of this process if required so the parties in conflict have access to assistance should it be needed.
These two covenants on each title (the Consensus Decision Making and Conflict Transformation) provide two components of a social infrastructure for the village to operate successfully over the long term. These features allow for new villagers to receive training in the use of these processes and participate in village life from their earliest involvement with the village. Naturally, there is a process for modifying these processes as we gain experience with them and find ways of making them better – something all villagers can contribute to.

*************************************************************************

So, there you have it.

A real life, functional and active resilient community, working towards self sufficiency, ecologically sound and sustainable practices, and the social engineering required to maintain it.

I applaud them all, and am quietly envious of the opportunities and challenges it presents.  It also reminds me to bone-up on my "the GPS's are gone" navigation and boating skills...

NEWS: Grey Ghost Gear and Tactical Tailor Press Release

Some of you may recall I did some reviews for Casey Ingels of Tactical Tailor (with thanks to David Reeder of KitUp! fame).
Concealed Carry Pack
Joey Hydration Pouch
MALICE 2 pack-set

I was thrilled to receive my very first press release today, I feel so professional. Very exciting prospects for both Tactical Tailor and Grey Ghost Gear.

(edited when they sent me a  revised press-release...)

**********************
Grey Ghost Gear and Tactical Tailor Announce Strategic Partnership
Lakewood, WA—01 July 13
“We have gotten into the fashion of talking of cavalry tactics, artillery tactics, and infantry tactics. This distinction is
nothing but a mere abstraction. There is but one art, and that is the tactics of the combined arms.”
— Maj. Gerald Gilbert, The Evolution of Tactics, 1907
“Shit, it’s the Blues Brothers!” Matt Murphy, 1980
ALCON: Bring it in, take a knee, listen up. Tactical Tailor is joining Grey Ghost Gear in a
strategic alliance the likes of which hasn’t been seen since Jake got out of prison and rejoined
Elwood Blue.
Tactical Tailor is a Tacoma WA based manufacturer of US-made, Berry Amendment compliant
tactical gear. Grey Ghost Gear is a ‘boutique’ manufacturer of bad ass niche kit headquartered in
Dalton, ID. Both companies are Veteran owned, and GGG is Service Connected Disables
Veteran classified company. Like the Blues Brothers, both can do big things by themselves…but
it’s when they get together that things get epic.
“The two companies have done some work together before, but not like this,” says CEO (and
former 2/75 Ranger) Casey Ingels. “Tac Tailor will be working with Grey Ghost much more
consistently. We’ll leverage the unique strengths of both companies to increase our offering to
the end users that will let us put some things in the field that will change everything.”
Neither company releases a new piece of gear until it’s been deployed and evaluated
downrange—true story, no bullshit. Ingels recently spent time on the ground in Afghanistan
handing stuff out to guys on the sharp end so they’d have it to try out (for instance 3RD Group has
a lot of it downrange now). They receive feedback daily via e-mail and frequent social media
traffic. It isn’t just tested by guys on the ground either. Members of JSOC and SOCOM test it all,
as do a cross-selection of line Soldiers and Marines so the conventional voice isn’t left out.

In addition to the brand gear it builds, Tactical Tailor constructs kit for many other companies. It
is an expansive list that includes H&K, Benchmade, Gerber, Leupold, Crimson Trace, Knights
Armament…virtually a who’s who in the industry. Grey Ghost Gear set the tactical community
on its ass over the last year when it demonstrated its quick turnaround, rapid prototyping and
overall agility—this is a company that received a call from a Tier One unit with a need,
prototyped it, modified it and had the finished product in their hands helping kill Muj in a week.

“Tactical Tailor brings production muscle to Grey Ghost. Grey Ghost is dexterous and
responsive,” Ingels says, waxing serious. “Though its operations base is in Idaho, its relationship
with manufacturers in the UK and elsewhere offer domestic and foreign options that TT just
won’t have on its own. TT has a couple decades of combat proven equipment to speak for its
quality. Tailor equipment will remain Made in the USA. The two companies will remain extant
as separate companies, working jointly.”
“We'll put the band back together, do a few gigs, we get some bread,” chuckles Tactical Tailor
Director of Sales (and retired Army SNCO) GW Ayers. “No, in all seriousness, this is going to
let us do some great things for the warfighter. CALL [Center for Army Lessons Learned] defines
joint synergy as having the strengths of each service combine to overcome the limitations of the
others, or to reinforce the good effects. That’s what we’re going to be doing, and it’s the guys on
the ground that will benefit.”
For further information contact Tactical Tailor Director of Sales GW Ayers directly: gw@tacticaltailor.com or call
(253) 984-7854. Find both companies on line at www.tacticaltailor.com and www.greyghostgear.com.

Quick Question for Aussie readers.... MS Clean

Would any of you in Australia be interested in picking up one of these slide-opening, hard sided, magazine shaped cases?

http://www.kickstarter.com/projects/823246061/ms-clean-the-magazine-shaped-cleaning-kit

The guys behind them are willing to ship me a box of 12 of them, at around $15 a case, plus $60 or so for shipping to Australia, for a total of about $20 a pop. (They are not offering international shipping as part of their bid, so are doing me a solid favour).

Designed to fit any standard magazine pouch (like the FUP, SCAR chest rig, 60 rnd Pouch, or the like), whilst being slightly too large for the magazine well of a rifle (to avoid that kind of accidental loading). Enough room to hold all your standard rifle cleaning needs, but also a great size for a bunch of other items...

I would love to get a few for myself for use in lasertag MilSim and costuming, as well as the cool factor, but I can't really justify getting a dozen of them, so I am putting it out to you my Aussie readers ... fancy one, willing to chip in and/or buy one when they come i, later in the year? You'd be one of the only Australians with one, as they don't think they'd ship any others over the Pacific.

Message me on apocalypseequipped@gmail.com and I'll let Pete and Trevor know. Help me help a couple of Texan lads out with their cool idea.

Review: Platatac - FAD Carrier

FAD carrier pic from Platatac's website, FAD in place

A little while back I went in to Platatac asking about how I could mount my Fiskars log-splitter to my kit when I was camping and tramping. I tried out their exceptional (but not quite fit for my purpose) FFE Holster. One of the other suggestions was to use one of their other pieces of kit, the FAD Carrier. Designed to carry a First Aid Dressing kit, this lightweight platform was easily re-purposed to suit my need.

I love it when a plan comes together.


The key to this piece are the webbing eyelets that are found at each corner, two to each corner in fact, one "inwards" and one "outwards", mounted to a light nylon panel with two sets of PALS/MOLLE straps on the rear.

In the unadulterated original format, a length of shock cord is cris-crossed through those eyelets, with a cord-lock to cinch it tight. This enables the user to stow a FAD securely and yet readily accessible at a moments notice by simply grabbing and yanking it free. Crucial for when saving seconds mean saving lives.

You can see here the twin webbing eyelets which I have rethreaded with a length of paracord as I found for my purpose, the shock-cord was too springy, under the weight of my axe. Looped paracord, held in place by those eyelets did the job perfectly.

The whole thing doesn't measure more than 8 cm (3") to a side, and given the placement of the eyelets, can be rigged horizontally or vertically, to suit your need.




A quick look at the rear shows the PALS/MOLLE panels that are ubiquitous to all of Platatac's gear, with its 2 channel, 2 row configuration.

Whilst a little tricky to get affixed, at this short a length, once attached this is a rock-solid platform.

In fact, the carrier was so solid, that I wanted to give it a try in a slightly different configuration, as a mounting system for my much loved Zombie Tools Deuce sword.

You may recall I showed off one carry option for the Deuce in my Apocalypse Equipped; No, Really Mayan 2012 non-event post, where I had it lashed through an eyelet to my 215 Gear sling but I found that the Platatac FAD worked a treat.




 The eyelets of the carrier matched almost exactly with the eyelets in the scabbard of the Deuce, and when lashed in with the same paracord I had used to secure my axe, I found that I could create a PALS/MOLLE fixture to my scabbard in up to six points along the scabbard.

This meant that I could wear it on a belt, lash it to my rig, or a pack, or pretty much anything with 2x2 PALS/MOLLE. The same would go for any other kit y0u needed lashed.

So, from a tiny piece of kit, so many opportunities arise. I really like this, and it was such pure chance that just by talking out what I wanted to do, the idea came to use the FAD carrier.

Brilliant!

Review: 5.11 Tactical - Stryke pants

When I visited the SSAA SHOT Expo, I paid a visit to the 5-11 Tactical stand, and met with their Australian and American reps, including the very knowledgeable founding father, Bil, who took me through the pants they were kind enough to gift to me, the 5.11 Stryke Pants.

Here in the OD green, with one of the 5-11 TDU belts I am fond of as well, I strike a pose with the ultimate urban test ... does the cargo pocket fit my iPad? Yes, yes it does.



From the get go, let me tell you that the material used in the Styke pants is really, really comfortable.

The secret to this, as well as the purpose developed propriety blend of poly/cotton ripstop, is that it  incorporates mechanically stretchy yarns, meaning the stretch and recovery of the fabric is achieved without the use of spandex, but rather by the way the threads are woven. 

It is a lighweight, breathable, and even with the ripstop checkering, extremely comfortable to wear. Soft and yet no hint of flimsiness. Treated with a silicone based water and stain guard, they help up pretty well from my work, parenting and prepping splatter for their first week of wear.

The cut of the pants was very generous, especially important if like me, you "go Commando" and find that tighter cuts pinch at the most inopportune times. These were a lot more comfortable than the 511Tactical Taclite Pro pants I have reviewed in past, great improvements! Even the waist band is well designed, but I'll get to that in more detail soon. 
 
On to the all important pockets!

You can see the main hands pocket, with their reinforced hockey-stick design (Bill tells me that was a specific request from Firefighters, to have somewhere to clip their radios. AN accessory pocket on the top of the thigh, the ubiquitous side-of-thigh cargo pocket, and just peaking from the side, the rear seat pockets.

What can you fit in them all? here, let me show you ...



I like my gear, and i like having it on-hand. However, being able to FIND it can be a real pain, unless some thought goes into pocket design, which in this case, it really has.

Similar to the Platatac Urban Dax, the cargo pockets sport internal compartment which are wide and deep enough to fit my bulky Snow Lizard SLXtreme iphone case as well as a Lazerbrite with little trouble. I can only suggest that the compartments would fit a 5.56 NATO magazine.

The hook-and-loop patches give a nice closure to the pocket, without being too invasive, and the styling of the pocket itself, with two baffles for expansion, we still quite discrete, an important aspect when wanting to blend in whilst still loading up.

Lets have a closer look at the front pockets.


As well as the twin, deep accessory pockets on the fronts of the thighs (seen here with the large HexBright FLEX filling it) but beside this, the main pockets have some interesting aspects that it worth covering in more depth.  As well as being nicely deep, and lined, but the best features are the hockey-stick shaped low profile pockets. 

This near-horizontal edge is perfect for clipping pens, folding knives (like the CRKT K.I.S.S. seen here) or as Bill told me, the pocket radio's that the firefighters who commissioned the pant design in the first place asked for. 

The belt clip of the knife (or pen, or radio) sits on a reinforced patch of material, still in the pocket, out of the way but easily accessible. For items with longer clips, the people at 5.11 had the forethought to put an opening in the top of the cargo pocket, but you could also feed cables up through it I suspect.

Two other interesting (and very thoughtful) features can be seen here as well. On the left-side belt loop, an opening can be seen, which is the space the self-adjusting tunnel waistband feed into. Similar to that seen in the Taclite-Pro pants, this allows the pants to stretch when you bend at the hips, without biting, or sagging, once you are upright again.

The second, innovative addition, is on the right belt loop, which features a vertical loop in addition to the regular horizontal one. Perfect for clipping ID or a badge, and in my case, a spot to clip my multi-tool retention lanyard.

 Then there are the knees. 

As well as pretty standard double-cover knees, to help with wear and tear, and we all know what that is like, 5.11 have kept this in mind when putting in the seams for these. Low-profile and discreet as well as discrete, the addition of a second layer adds little bulk, but the real trick to these in on the inside!

On the inside edge of the knee seam a small pocket opens up to allow the insertion of a kneepad. I put my Blackhawk! kneepad up here to show you what it looks like. The pocket is certainly big enough, but takes some delicate handling to fit the bigger pads in.

All together these are some really excellent pants, I was thrilled to receive them, and their comfort was a really impressive collection of features. 
 

My only disappointment was the back pockets, being a standard hook-and-loop straight topped pocket, unlike the signature 5.11 slash and retention strapped back pockets of the TacLite Pro's.

 That said, there was even an extra unlisted feature that Bill pointed out to me (always great to have the people behind the product there to show them off) In the bottom hem, eyelets have been sewn in place in case the wearer wanted to blouse them! Little things that show they go the extra distance with design.

I also love the way 5.11 got their name ...

“5.11” is a rock climbing difficulty level as listed in the Yosemite Decimal System. With skill levels ranging from 5.0 (easy) to 5.10 (difficult), 5.11 is even more grueling. 5.11 is officially defined as, “After thorough inspection, you conclude this move is obviously impossible; however, occasionally someone actually accomplishes it.”