Review: L10 flashlight

I love flashlights and always like having extras on hand, following the "two is one and one is none" philosophy. pocket and palm sized lights are even better, as they can fit into small packages, and be used in variety of settings. I especially like small lights that I can throw, drop behind a bookshelf or wedge into a crack to illuminate a workspace. I have a collection of these as part of my EDC, including the previously covered bullet-02-smallest-edc Lumintop Tool AAA Jenyx UV and an as-yet unreviewed Four Sevens Bolt action penlight

This particular addition is the L10 Twisty from L3-Illumination Lumintop. It is a lightweight(at just 20g (0.7oz) without battery flashlight, featuring a Cree XP-G2 9R5) LED with lifespan of 50,000 hours and it takes a single 1.5V AA battery (ni-mh, alkaline). It's reported that rechargable high-performance 14500 batteries are not recommended because they heat up quickly.

Constructed from durable aircraft-grade aluminum with a Type III hard-anodized anti-abrasive finish to house the toughened double ultra-clear glass lens it is waterproofed to IPX-8 Standard. It measures just 79mm(length)x17.1mm(dia) for a very convenient pocket addition. I have mine attached via the end-cap lanyard hole to a short cord and thus attached to a house-key. Ease of entry for those dark night returns.

The L10 is activated by a twist switch set into the body of the light around the 2/5 mark of the body. Twisting the head of the L10 engages the first of four modes of action. The four modes activated by turn and re-return the head of output are as follows: Firefly (0.09lumens brightness with 147 hours duration); Low (3 lumens, 30hrs ); Medium (30 lumens); High (120 lumens, 1.5hrs duration) (when tested with Ni-mh battery with actual capacity 2500mAh).

It features a stable current regulated circuit, providing stable brightness throughout use. Unlike many flashlights of this type, it has no mode memory, always starts on lowest mode. Just tighten and loosen the head to switch between modes. Its flat base, and lanyard cutaways allows the light to be placed on its end to move into its practical candle mode.

The head end comes right off by unscrewing to replace the battery which is something you need to bear in mind when switching modes and also using the light in wet situations. It has a rubber- o-ring to seal it but once over-unscrewed the head can just fall right off, exposing your internals, dropping your battery and shutting of the light all in one annoying "ker-plunk".

All in all the L10 makes a very useful little light, great for those "i dropped my "X"-in the foot-well of the car", "where's the damn key-hole" and "what's under the couch?" moments in which a larger more powerful light would be overkill. Solidly made, functional and convenient, the L10 is welcome addition to my janitor-grade bundle of keys.

Review: SLUGhaus - BULLET 02 Smallest EDC Flashlight

I have plenty of keychain tools including a couple of keychain lights, the Jill lite Constel lantern which is built around a CR-123 but rock solid and a lightweight Photon LED as last ditch backup. I have a couple of AA flashlights on my belt, including the Jill Lite Jenyx UV which is fun but sometimes even a little AA light is too much, like if you're trying to find the keyhole of your car without scratching paint, or finding whatever fell out of your pocket at the movies.

Enter the Bullet02 from SLUGhaus. Launched on Kickstarter as their Version 2, the sucessor to the succesful first version, designed to be waterproof, more minimal in design, more secure, smaller and brighter. And most importantly its damn near indestructible. (For a certain value of indestructible.)

This litle bullet-form light features a quick 180 degree rotation that with a spring lock  for secure on/off operation. It will not unlatch even under the most vigorous conditions you might put your keys sensibly through.

Bullet02 can be submerged underwater for a total of 5 minutes without any water breaching it's seals. It will illuminate in any weather and in any situation, helping you solve any darkness problem.

Measuring in at an incredibly small 10mm x 26mm and weighing in at only 5 grams, thanks to its premium aerospace grade aluminum alloy (T6061) construction Bullet02 is the perfect sized flashlight for modern day wear. Powered by three tiny little LR41 Button Cell batteries to produce 20 lumens of light, keep it with you at all times, anywhere you go. 

20 lumens isn't a lot when you stack it against some of the big tactical lights but its plenty enough to navigate in a dark house or lighting up whats right on front of you. 

Laying side by side with this drilled out .45 Auto the form factor is clear

One of the main features SLUGhaus wanted to redesign was their previous "Twist Operation". They have improved this by creating a new mechanism altogether. This time, improving the threading by making it finer and having the threading extend all the way up through the inner casing. In addition, adding a gold plated spring inside for optimal conductivity and pressure, for keeping Bullet 02 snug and sturdy at all times. I've found the

 

What is an LED you ask? LED’s are the most efficient kind of light bulbs out on the market today. One small bulb can last you anywhere from 20,000 to 100,000 hours. Of course you'll still have to replace the batteries periodically. However, they decided to use a premium 5mm bulb for BULLET 02 that can last up to 150,000 hours in lifespan. It casts a nice crisp blue white light, with a good direct cast as well as a reasonable spread for room-illuminating cast.

I've found that having my primary Bullet02 light (as I got several in my pledge) on my car-keys, attached to my titanium carbineer for extra go-fast. and it has become  a very useful, always at-hand (not in the bottom of a pocket) light, capable of acting as a "here I am" signaling light as well as its previously stated tasked jobs of keyhole finding and dropped treasure relocation. The form-factor is great the elegant bullet shape is nice on the hand, the twist-on-off action is smooth and easy to work.

Your flashlight says "Maglight replica"mine says ".40 S&W"

I haven't attempted to test for battery life, but i'd expect it to run good couple of days before running flat and whilst I wouldn't use them as a marker whilst caving, you could certainly mark out your tent or privy whilst camping to good effect with one. Given the size and the sturdiness of the triangle clip, you could even use them for collar-attachments for pets, or as personnel markers on kids when out at an after-dark event, on a necklace or attached to clothing. I like to do this on both Tactical Baby and Triceratops Girl and whilst its no substitute for attentive and responsible parenting, it allows a certain amount of freedom and adventure for adventurous and sensible kids.

Review: Pocket Slingshot

 I took  a chance with Ali Express and bought myself a cool little gizmo that I'd seen online.  I got a pocket slingshot. These are really jut production version of a childhood toy that I remember fondly. In Victoria where I live, the humble Y shaped slingshot is a restricted / quasi-legal item, for whatever reason.

The concept is very simple, a plastic tube forms the frame to which an elastic pocket is attached. The pocket becomes the motive force to propel its projectiles. The package also included an archery brush attachment which is threaded and fits onto the plastic ring outer face, when the cover is off.

The elastic pocket is shaped to included folds and pleats to add to both its elastic potential but also add stress relief. In the old homemade pipe and taped on rubber washing-up glove fingers
 versions, the interface between pipe and glove always seemed to be the place where it would tear.

The plastic ring has a 5cm inside and 6cm outside diameter, and with either the threaded cap or the brush-bristled archery lid is only 3.5 cm deep. Its a very compact little unit. When the cap is on, the air can be expelled and the elastic pocket compacts down into the ring. Thusly sealed, there is even space for the ammunition of choice in the contained pocket.  I also bought a 100 unit lot of 6mm steel BB's and raided my daughters toy box for glass marbles. The third ammunition type are arrows.


When coupled with the archery lid, the soft round rubber notchings of the included arrrows protect the elastic pocket from tears that might come from traditionally nocked  arrows. The included arrows are only half-length more likely  to be crossbow bolts than traditional bow-archery shafts.




Now, it's hard for me to measure the functional power of the slingshot, as I don't have a chronometer handy, of an means to measure impact force. So all I can tell you about the force of the slingshot is anecdotal at this stage.  I did accidentally put a BB through the steel mesh of my front security door, hard enough to have it ping off the concrete wall on the other side of the street. (Always know what  you're shooting stand what's behind it!). I've managed to punch through a number of single and double thickness cardboard boxes.  I think I ill try soda cans and plastic bottles next. Glass marbles weigh more than individual BB's but also pack more mass. As with any caliber discussion: big and heavy hits harder but small and fast hits deeper. Further testing required.

It shoots pretty straight, and I've contentedly lobbed marbles the length of my house's long hallway into my target box. With no sights, aim is a matter of lining up the  pocket and the hang-held ring and eye-balling it. Using a couple of archery tricks like being aware of the archers paradox and practicing!

So, last night I set up a little range in the backyard. with a tactical crate as my target cage and partial BB trap. I put in a can of out-of-date Pepsi-Max and took a shot from a few feet away.  I wasn't wanting to do a test for realism, I just wanted to get a feel for its penetrative performance. At 2-3 feet away, and at a 2/3 draw, my BB hit in the bottom1/5 of the can, and in a riot of sugar-free foam, the can ruptured. After it finished draining I inspected the can and noticed that there was an exit hole too. I'd  call that a good trial run, though more testing may be required, I have a bunch of that old nasty Pepsi-Max siting around ...

So, the pocket slingshot is a fun little toy, and I suspect if you had a rodent or pigeon pest issue it might be a useful tool, and certainly fun for plinking cans with.  I don't think it would be much use hunting with, for anything bigger than maybe a squiril or rat ,and even then  I suspect you'd have to get a head shot. better to trap I suspect.

Review: Savoury Tooth - Not-Sweet bars

Whilst getting ready to get back to work, I went and got some new pants, as I'd lost enough weight that my pant-size had changed. Whilst in Kathmandu looking or suitable pants, I came across some interesting snack-bars and thought I'd give them a go. Given that my job entails me sitting at my desk tapping out code and putting out electronic fires, I eat a lot of food-bars as it's fast and easy. However, mindful of my diet, I was intrigued to see these are not sweet-candy bars like many trail snacks are, I've covered some in the past. The Bounce food-balls and the Blue Dinosaur Paleo Bars which are both good products, but both pretty sugary.




These protein bars are primarily made of a whey protein concentrate purported to lower blood sugar levels when consumed before a high glycemic meal and is the most complete protein.


They feature a polydextrose binding agent, where something like treacle or molasses might be used in other food. The one used in the Savoury Tooth bars is a low GI soluble fiber with prebiotic properties.

It helps to slow down the digestion process alleviating blood sugar spikes. Reducing sugar rush effects.

Heavily spiced, with woo-seeming ingredients like turmeric for its active polyphenol known as curcumin purported to help provide an ideal intervention for type 2 diabetes. Ginger, chilli, cinnamon, coriander, lemongrass and garlic have also been shown to help lower blood sugar levels.




Importantly, these bars taste amazing, and had a really nice texture: Not too hard to bite or chew, but not mushy or pasty. Dense and rich. The seeds included gave each bite a variety of texture. Food fatigue is a real thing, and having some variety makes a lot of difference, remember that when you're loading up your bunker or bug-out bag.

The Svoury Tooth bars come in "Thai Green Curry" and "Thai Peanut Stay". Both really do taster like they are described. For me, after a few chews, and rolled the bite around in my mouth, the flavours emerged and I found myself recalling street meals I had in the streets of Bangkok and Singapore I had growing up. I'd go as far as to say these were authentic flavours, from my non-native pallet. Jut a hint of spice, certainly enough to get the mouth juices flowing, but not so much as to drive me to rinse my mouth out or reach for he milk. Certainly enough to satisfy the Texan in my culinary history. Not Jakarta Crazy-Wings hot, by a long shot, but not Vanilla thickshake either.

From a nutritional perspective, the

Savoury Tooth protein bars are great after any workout. Each 50g bar offer s 870kJ of energy, or 10% of a 2000cal daily diet. 21-19% of the protein intake 13% of the fat and 6% of the carbs. There is quite a lot packed into these little bars, but the heavy seed and spice content, the bars come with a reasonably short best-before dates, ofonbly a few months as the rich aromatics would age poorly.

I've found the couple I bought to be very tasty and fun to eat and a perfect break from other sweet snacks. Not as satisfying as beef-jerky, but still, a good pre-packaged snack.

The advertising was great too, these post-cards made me chuckle even months later when I pulled them out.



Low in sugar, with complex carbs, high in protein, and dietary fiber, Gluten free these seem to be really viable healthy alternatives to other candy-like sports and protein bars. I'm not a big fan of woo, and straight edge vegan, paleo lifestyles, but these healthy bars don't wrankle me as soy-based, cruelty-free fair-trade hippie-bars might, they are more the granola eating, merino-wool beanie mountain climber food. plenty of bang for your mass!

Review: Lumintop Tool AAA flashlight

I've been very remiss about this one, this little light has alternated between sitting in the bottom of a couple of bags, and then pockets of both pants and jackets. This is both to its credit and a flaw, but I'll get to that.

The Lumintop Tool AAA is a very diminutive light, at just over 8cm (3.2") long, and around 30g (1oz) it really is pocket sized. Taking a single AAA battery, the machined aluminium body is less wide than a single AA battery.

A single tail cap button at the rear enables the user to cycle between the three light modes with momentary toggling, which starts at a Medium of 32 lumens, then to a 5 lumen Low setting and ramping up to a 110 lumen High setting. I really like this pattern, with a medium setting to get you out of the dark, a low setting next to enable you to do your dark-work without disrupting your night vision or drawing unwanted attention at the Watergate Hotel.

Having the High setting last means that you have to call it up and not only reserve battery power, but also maintain control over the amount of light you throw, till you need it.

Another excellent feature is that once the tail cap switch is "on", the head is on swivel, allowing twist-driven switching between the three modes and "off". There are o-rings sealing the unit at both the head end and tail-cap end, either of which can be used to replace the battery.

My favourite aspect though is that the detachable two-way clip, which enables you to fix the light directly to a cap-brim, giving you a keychain sized head-lamp at a moments notice. You won't be using it to chase alligators in the sewers, but find yourself with full hands in the rain and having dropped that screw from your widget, and you have yourself a good-to-go tool for the job. It's low weight makes it ideal for this use.

It's tiny size means it gets lost easily, especially if you have a lot of loose gear rattling about. AAA's are not high-power, or long lasting, but for occasional utility use, they'll do. Threading a lanyard through either of the lanyard loops in the tail-cap, or clipping it to a keyring would probably go a long way to retaining it.

It's not a searchlight, it's not a weapon-light, its a pocket sized keychain light with a very light profile

Here's some links from the vendor:

Their website: http://www.lumintop.com/

US Amazon store: http://amzn.to/2421r4t 

CA Amazon store http://amzn.to/29LZfWx

DE Amazon store: http://amzn.to/290zJjK

UK Amazon store:http://amzn.to/293oBQQ

IT Amazon store: http://amzn.to/29cRxlC

Review: Propper - Genuine Gear Pants

It's been a while since I've covered a non-pouch, non-gadget, so I thought I'd cover one of my other staples. PANTS. Generally, I subscribe to the philosophy that "pants are tyranny"

I wear a lot of cargo-style pants, almost every set of pants I own in fact, not to mention my collection of cargo and tactical kilts. So when it comes to new pants, I have a few requirements and points I look for. I need to have cargo pockets that let me stow my iPad Air, at a minimum. I go to a lot of meetings, and use my technology heavily, but also like to go hands-free as often as possible.

It also helps to have copious loot storage when it becomes necessary. Snacks, shiny and pointies, discarded kit, whatever. Big pockets are a must. I also want strong crotches, as I seem to tear mine with alarming propensity in some pants, so good gusseting is important. The Genuine Gear pants certainly met my needs.

The military-inspired construction and fit of the Genuine Gear pants pulls from some pretty classic design elements. A zippered fly with button closure sits over the reinforced seat, as well as having all the seams, inseam, outseams and seat seams being "felled" which is to say double stitched. This makes them pretty sturdy. There are six pockets in the design, regular front pockets, twin button-closure back pockets with button flaps, and two large cargo pockets with double button flaps.

The bellowed pockets also feature drainage pockets and the pocket flap seams are fused for clean, professional look, however, I wasn't all that impressed with the outcome, as the flaps didn't sit flat.

In fact, the pants are billed as fade, shrink, and wrinkle-resistant, but I found them to take wrinkles quite easily and made them a little higher maintenance than some others I've reviewed. The ripstop material however, was quite resilient, and have both kept their colour and shape very well, and have resisted wear handsomely. They also feature adjustable waist tabs for secure fit which are a nice addition, as well as durable tape drawstring leg closures to keep rainbows, carnivorous cursed scarab beetles, dust and grit out of your pants.

The belt loops were a little narrow, which is probably the weakest point with these pants. I personally prefer thicker beltloops with more reinforcement sewn in, but they are still fully functional.

The fabric is very comfortable, and hasn't chafed or pinched on the inseams like I have had other pants do on occasion, so they have been comfortable for long hikes and adventurous clambouring.

They fit well, and were it not for the less than wrinkle-proof effect, I'd be over the moon with these, but on the whole, they are totally adequate, and robust enough for both outdoorswear, adventure and regular wear.

Review: First Tatical - Medium Duty Light

I did a "quickie-review" of the First Tactical - Medium Duty Light, which arrived in the mail a few moths ago, and was seen on Breach-Bang-Clear then, but I wanted to give it a bit more thorough a review, because it's come to be a reliable go-to light here in the bunker.

This is the aptly-named Medium Duty Light by First Tactical.

I usually use flashlights that are rechargeable directly, like my now defunct  HEXBright.

Sometime though, you just want some stock-standard batteries pulled out of old TV remotes, drumming bunnies or personal upper-thigh massagers. AA's are everywhere, and the MDL takes them.


Read the rest here on Breach Bang & Clear ...











https://youtu.be/3dYNRNNjcgY

Review: Para TPS Pulley systems

I love paracord. I love titanium, I love pulleys, I love Kickstarter so when a titanium paracord pulley came up on Kickstarter, I knew I had to get on board. I've covered a titanium paracord pulley system before, in the Ti2 PB-9 Parabener systems which live on my daypack, just in case. However, they are pretty chunky, being loaded with other features, and might be overkill when all you need is some lifting and shifting.

That's where there the TPS system comes in. A bare bones pulley system, it's a Universal Pulley System made from grade 5 titanium and ready to be used for making work easier and putting no matter what you're doing. Designed for paracord, or any other 4mm line of your choosing.

The TPS pulley systems are available in four formats, the TPS-2, TPS-3, TPS-4 and TPS-5. the number value corresponds to the number of "sheaves" which are the wheels inside the pulleys, designed and produced by Andrew of Root Designs R&D .

Root Designs spent a lot of time determining the design and materials they wanted to use in these pulleys. The side plates and pins are made of Grade 5 titanium (Ti-6Al-4V) because of its strength and corrosion resistance. The sheaves are made of a homopolymer acetal (which is a very strong plastic that is used for bearings because of its low friction coefficient, perfect as sheaves). The clip-in retaining rings are made of stainless (304SS made by Smalley).

Some serious design and research went into the development of these. Based on using paracord with a minimum breaking strength between 250-340 kg (650-750lbs) for Type III to IV paracords, a FOS of 3 puts the maximum breaking strength (MBS) of the pulleys around 2250lbs. These values were tested on a computer using failure-and-finite-element-analysis software. Bearing in mind that most civilian paracord is type II to III, with minimum breaking strengths of 180-250kg, (550-650lbs). Doing these studies are part of why Root Designs needed support from crowdfunding.

Having gone through rounds of testing and prototyping, they have pulley systems now rated for a Working Load Limit (WLL) of 68kg (150lbs) and a Tested Breaking Strength of over 900kg (2,000lbs). What does that mean? it means the TPS is recommended for loads of around 68kg, and is known to catastrophically fail at 900kg. Given type III paracord will take at least 250kg, my money is on the TPS working long after the paracord snaps, if you're looking at points of failure.

What's the big deal with pulley's in the first place? Mechanical advantage! Anything you need to move or lift, these pulleys can offer up to a 5:1 mechanical advantage with paired TPS-5's. By setting them up in sequence, and threading paracord through the sheaves correctly, the power of simple machines can reduce the effort needed by up to 1/5th of the force needed by a single loop alone. A single pair of pulleys halves the effort, three, a third and so on.

I backed for and received a twin set of TPS-5's and also got a TPS-2 as well. They can be used in a variety of combinations, or singly depending on your situation and need. One thing to remember that with all pulley systems, your ability to lift is only as good as your weakest component. Any attachment accessories (I've used two steel S-hooks from Ikea, so useful) as well as Type 3 paracord. However you also need to take into account the features of the load, and it's ability to haul itself, as well as whatever you are mounting your load too.

The other aspect to be aware of is the length of cord used. For every sheave used, the length of "fall" between the sheaves increases. This needs to be taken into account when reeving (lacing) the pulleys.

Pulley systems mean that someone with little hands and arms, like Tactical baby, can lift this 2.5L kettle full of water, and hold it, in her non-dominant hand, and nonchalantly pose for photos before bedtime.

Here's a tidbit of information from the Royal Canadian Sea Cadets Seamanship manual,
Parts of the Tackle:
a. Standing Block: The block that is anchored and is not moving. This block changes the direction of the running part.
b. Moving Block: The moving block is attached to the moving end of the rope (the end the cargo is on).
c. Fall: The fall is the rope that is rove through the block.
d. Standing Part: The standing part does not move. It needs to be secured to either the standing block or some other fixed position.
e. Hauling Part: The hauling part is the part that is pulled.

But acting as mechanical advantage gaining simple machines aren't all the TPS can be used for, you can combine these little workhorses to get other tasks done too. If you need to send some gear across a ravine, creek or river, or between abandoned buildings in a desolate wasteland, each pulley was designed so it could be used as a zip line shuttle. Setting up a static line and fitting one of the TPS's on it, with either one, two or three sheaves to spread the load over the line means you have a very stable and secure system for shuttling loads back and forth.


You could even use the spare sheaves to run pilot lines to haul back and forth, as well as for suspending your load. In other applications, you could even make a dog run, or other off-ground tethering system for pets or small people whilst out and about.

I even found that by setting the TPS-5 up in a cross-woven pattern, I could make a friction belaying zip-line, in the style of the mechanical decent RACK devices offered by Petzl


Being made from titanium, acetal polymer and stainless steel, they work great in harsh environments such as the ocean, or gritty, hot environments. They could just as easily be used on a fishing boat as in the bush. The limits to their application is really up to your imagination, and material strengths you have to work around.


One of the really nice design features is their small profiles. By using clipping retaining rings, the side profile of the pulleys stay small. The TPS-2 is5/8" x 1-1/2" x 9/16". The TPS-5 is 2-1/2" x 1-1/2" x 9/16".

Basically pocket sized, no matter how you put it. The pins do not stick out from the side plate as much as a nut or the head of a bolt would, which means they are far less likely to snag or catch, as well as reducing weight The TPS-5 weighs 45g (1.6oz) and the TPS-2 a mere 18g (0.6oz). Each pulley can be user-serviced if needed using common tools, and spare parts are available from Root Designs on their website. They also offer a snap-bolt which can be fitted in place of the machined pin, around the existing sheave, to offer a built-in attachment point in the place of any of the existing pins. This is an awesome addition to have designed in, and I'm kicking myself that I didn't put in for some with my pledge. However, there's nothing magic in the bolts, and it is just a matter of finding a bolt which fits, and somewhere to shackle your pulley!

 This is the kind of gadget that you probably wouldn't think to pack in your bug-out-bag on first pass, but to kit out a minimalistic problem solving swag, you could do a lot worse than including a set of TPS's to give you an advantage over your environment!

Review: MetalDreamer - PINCH multitool

Always on the lookout for new and exciting titanium pocket tools, when the Pinch tool came up on Kickstarter, I could hardly restrain myself. Given the very affordable pledge levels I didn't feel bad about chipping in, and was pleased to see an envelope arrive in the mail not too long after. Created and designed by Jeff Morin the Pinch is the smallest tool in the MetalDreamer lineup it is billed as the go-to tool when you're in a Pinch! Cute.

Packing 11 functions into its 1.5" x .5" design, the Pinch has a surprising amount of home-fixit application in mind in one little package.

With a mini pry bar, bottle cap opener, 6-mm hex wrench, wire stripper, nail puller, keychain eyelet, 1” mini scraper, hex driver bit holder, and two flathead screwdrivers. I ordered mine in metric, so it also features a 3cm ruler etched into the scraper side as well.

I opened a few bottles, pried open some tightly sealed tins, and scraped some stickers with it, and it seems to live up to its intent, but the small size makes it quite difficult to apply much torque, but you'd expect that from a tiny keychain tool like this. If you wanted a big prybar, you'd go the County Comm Breacher Bar, or the like. This is a keychain fixit tool, not a dedicated tool-box replacement.

The Pinch was on Kickstarter, and is still only available to backers it seems, but keep an eye out, and look over the other offerings from Metal Dreamer, they have some very pretty, and functional looking designs.

Wish-Lust: Kickstarter - PACE lid

 I love modular and multi-purpose kit, and if I can get and everyday piece of equipment like a drink bottle to do double duty adds a significant thumbs-up from me.

This Kickstarter project, from GoRuck badass, and innovating outdoorsman, Chris Way.



This is the PACE lid, and it's Kickstarter is underway.

PACE stands for Primary, Alternate, Contingency, Emergency. When planning for events in life you have to expect that unforeseen things may happen and knowing this is empowering.

The container in the PACE lid is 300mL (10oz), it's deep enough for an ID or credit card as well as a variety of other gear.

The container is 7.6cm (3") in diameter and 5.7cm (2.25") inches deep. There's a small well around the perimeter that can secure items vertically and in place if they are bent, like cards, matches, other gear items. It's a feature Chris designed in and finds very useful in certain loading particular items in.

So far Chris and his team have tested the PACE lid and found it forms a water tight seal on wide mouth Nalgene, Klean Kanteen, Hydroflask, and MSR bottles.   I have a couple of Nalgene's so their perfect for me.

The prototypes seen here are apparently 3D printed, but the production models will be tooled plastics.

As well as the lids themselves, Chris is offering a pre-filled First Aid PACE, stocked with products from MedTraining Group, who specialize in non-permissive First Response fitting and training. 

If you're super keen, high-end backers can also get training and adventure time with the PACE team, so there are all kinds of benefits to backing this project, big or small.

For me though, it's all about the lids, and stowing my gear, wherever I go.

Be sure to check it out and hopefully, we can get it over the line.