Review: Propper - Gen Multipurpose Bag

As first seen on RecoilWeb .....

Here is another part of my Propper haul, and one that I have been getting a whole lot of utility out of.  I took it with me to Fiji for my island get-away, and it rode as my carry-on as well as emergency toddler change station. It's been my day-to-day bag since then, swapping out from my beloved Platatac Bullock Echo as I've needed a more briefcase style option rather than a backpack for my current duties.

This is the Propper Gen Multipurpose Bag and it punches well above its weight.

Filled with storage options, the bag offers a rather large carry-capacity to an otherwise standard briefcase-style design.  I can fit three 2L (2.1qt) milk jugs to the main compartment with no problem.

One of the first things I noticed, and have come to love, about this bag, was the easy-access, dual zipper opening, tapered grab handles. Grab and yank, and the bag opens up. No more fiddly zipper pulls and fine motor skills needed to grab your needfulls. More on that later.

The bag has a wide webbing strap, with a very well made non-slip shoulder-pad, a real boon for a habitual over-packer like myself. The shoulder pad itself has webbing loops that allow you to fix it in place via hook-and-loop tabs, through the pad, to eliminate slippage.  The strap can be adjusted at each end with a broad tri-glide loop, and there is a big-mouth 50mm (2") Fastex buckle at each end of the strap, for quick release. One of my biggest gripes with previous satchels has been the "slung across my chest" trap.

There is also a inset pocket at each end of the bag, between the main compartment and the side-saddle pockets, that very neatly fits my Propper Liberty bottle and even takes my venerable 1L SIGG bottle. 

The "front" panel of the bag is faced with a broad loop field, for patches, and I've made great use of that. Inside that front facing panel is a very spacious document compartment, with three distinct sections, that will fit a number of CD cases, iPads and the like. A hook-and-loop tabbed strap keeps your valuable documents and devices secured, and as with all the zippers on this bag, it features rubber-moulded zipper-pulls as well as "inverted" zipper material to give maximum crud intrusion protection.  

The opposing "inside" facing panel features an even greater selection of pockets, for holding all your needful tools and tricks. 

I have mine loaded up with a variety of goodies; both eating and entry hardware, medical and electronic. Things I don't like to leave home without! 

Again, the double  rubber-molded zipper pulls give good, fast access to my kit, and the panel itself offers a flat clean workspace that is flush to the ground, thanks to the design. 

You can see the main carry handles extend all the way through the pack from the side panels,  they continue all the way under the bag as it happens. They are NOT going to tear off, no matter what you fill it with.

The main compartment has its own surprises as well. Twin storage pockets add further capacity to the narrow ends and the bottom of the compartment is lined with loop-field to facilitate the removable divider, which itself has zippered pockets for business cards, death-cards, whatever. 

It is also loop-faced and includes a 3-channel organizer for all your highlighter pens, or double stacked mags, to go along with the hook-field sided adjustable pistol sleeve that would accommodate most handguns. I don't have any justification to have that in use, but you might. 

Coupled with the grab handle opening strap and you have a quick-access concealed carry option right there.

The side pockets, two on one end, and one bigger one on the other, follow the same pattern. Taped seams, inverted zipper runs to keep crud out, and internal pockets to maximize organization. The single big side pocket also features a clear plastic external ID pocket.

One more cool feature are the twin, adjustable hook-and-loop retention straps for an umbrella or flashlight that sits over the"inside" pocket. It also happens to be a perfect fit for my DeadOn Anihilator Superhammer, because, you never know ...

All in all, this is a pretty awesome bag. It certainly does everything it sets out to do, and had weathered all I've thrown at it, from kicking around trains, planes and hospitals, to being an overnight bag and a day-to-day hauler of my ever changing loadout.

If I had to pick something to gripe about it would be the overall "width" of the bag. When I sling it either across the front of my hips like a paratroopers reserve, I've found that it is  so wide that I bump and brush people with it where normally I wouldn't have, with a backpack. Same goes when I sling it behind me. The addition of the end pockets, whilst adding valuable additional storage, also add to the bulk of the bag.

That said, I'm very pleased with it, and will keep using it until it dies or I find something better.

Review: Platatac prototype hydration carrier

Here is the hydration pack that I have been using for the last few Tough Mudder events I've done. This is an old prototype from Platatac that I picked up on eBay, and combines elements of both their Bravo hydration carrier that I have, and the MEOP Medic Pack both of which I've covered in the past, and are great pieces.

I found that wearing an extra set of straps was redundant when I was wearing a vest anyway on my Tough Mudder and similar adventures, which is why I looked for an alternative to the Bravo, which has served me well in other situations, and on my first Tough Mudder. When I saw this piece come up on eBay, I was thrilled to give it a go. It follows the same kind of design philosophy I've come to expect from Platatac pieces, with a tough 1000d Cordura exterior, and ITW Nexus hardware. It if "faced" with 6 rows of 4 channel PALLS/MOLLE loops, and features a hook-and-loop secured drag handle. Running down the flanks are nylon D-rings, three to a side, allowing shock or paracord to be run through these, to provide attachment points, or compression.

The wide-mouth of the pouch perfectly fits the Source Storm 3L hydration bladders main cap.

The baffled sides of the carrier allow for quite significant volumes to be carrier, without restriction, or perhaps even storage for other items besides a hydration pack. However, this particular piece lack the zipper-access of the Bravo, which means that the only access into or out of the inside is through the main cap.

This actually posed a problem when trying to run my hydration hose through it, and I bit the bullet and melted a channel in the backside to feed it through.

I also had to melt a drainage hole in the bottom, following the previous Tough Mudder, last September.
I found that the carrier filled up with nasty pond water when I took my tumbles, which really added to the weight I was hauling. No such trouble with a small drain hole melted in this time around.

The back of the carrier offers a variety of attachment options; Zippers paired with the MEOP carrier (which allows me to sandwich these two pouches nicely). It also features female Fastex clip ends top and bottom, tri-glide loops for all your clipping and looping needs. Best yet, the back features two sets of three three channel PALS/MOLLE PLMRS (Platypus Light Modular Recovery System) strips. These gave both a rock solid attachment and also load spreading capacity. I barely felt the 3kg that the full bladder weighed,and certainly not the sloshing side-to-side I might have with a pack-type carrier.

This was just a prototype, bridging the gap between the Bravo and the MEOP, but if you want to see the new production version, check out the Platatac Utility Hydration Cover. Looks like the logical next step.

Review: Tactical BBQ apron

I've been holding off posting on this one till an appropriate juncture, and I think this day has arrived.

This is the Tactical Chef Apron by ThinkGeek, and I just had to tell you about it today.

I'm all for being equipped, and being caught out at the fire-line without the right loadout can mean the difference between slabs of hot steaming, bleeding meat, and charred inedible ruination.  That is when having this kind of kit is essential, if not life-saving.

Made of 100% cotton, you can expect the apron to protect your thorax and groin from all but the worst boiling-oil splashbacks, and flare-ups, and perhaps even the exploding kernels of maize.

Featuring a top section of 6 rows of MOLLE loops, with 6 usable channels in the mid chest, and 10 channels at the rib-line, and a further three rows of 10 at the bottom of the apron, this is a modular combat chef's dream.
Twin sets of triple D-rings, mounted  at the upper regions allow for a variety of hung items, and twin snap-clasps at the the waist line give direct attachment and retention options. Three PALS/MOLLE compatible hook-hand-loop fastening pouches, one triple set and two larger sets, one with a look-filed for ID, unit or morale patches offer a variety of mission specific load-outs.

The lower section of the apron features three dump-pouch pockets, for a variety of accessory and brain-grenade carriage capacity.  Watch out for the pocket stitching cutting through MOLLE loops though.

The wide shoulder straps are not adjustable, but come "hero-sized". Fastex style clasps secure front and back, with webbing sliders expanding to allow for the more substantially proportioned combat-chefs.

The back features even more MOLLE loops as well as a broad loop-field for further ID and insignia.

 

Click the picture to be taken to ThinkGeek to buy one!

This is a fun piece, which I enjoy throwing on whenever I face flames, steaming flesh and the wailing of mouths, screaming for blood.

Review: SORD - 870 Back

The good folks at SORD, who hooked me up with one of their very cool hoodies, were also kind enough to send me one of the items I saw on their website but have never seen the like of in person. As you are probably aware, I am big on being prepared, so it probably strikes you as unsurprising that I have a set of bolt-cutters. These were a hold-over from my University Scavenger Hunt days (I was head/on several Black-Ops teams, and later a Judge) but the knack of getting into, onto and around obstacles, and coming away, unscathed, with tools, with the prize has always been dear.
This is where something like the SORD 870 Back pouch would have come in very handy.

Explicitly designed to house the Remington 870 models of shotguns, as well as other breaching tools such as sledge hammers, bolt cutters and breaching bars. I was thrilled at the chance to get my hands on one and see what I could make use of it for.

Fitted with two twin sets of PALS/MOLLE attachment tabs (with integral hook-and-loop) and a Fastex style clip with a long webbing strap, this was exactly what I'd envisaged.  Constructed from what I believe is 1000d Cordura.

Internally the pouch has two main compartments, the larger, external one, and a smaller, tucked-away one. I hadn't noticed the smaller one until I had been loading it up, and I opened it up. Not owning a shotgun, I havent been able to test it out with its name-sake, but I certainly tried out a variety of my own stabby, cutty, smashy tools, and was very pleased with the results. The main pocket was a perfect fit for my off-the-shelf bolt cutters, holding them very securely for such a head-heavy tool.

The thinner back pocket seemed to be a perfect for for my stand-by tree-chopper, the Ontario BlackWind. I really wanted to fit it out with my Zombie Tool Deuce, but the Deuce was just too much sword for that pocket.

With the retaining strap holding it in place, I mounted the pouch to the side of my Platatac Light Field Pack and took it out for a trial. I barely noticed it. No sway, no rattle, not jiggle. In fact, with those top and bottom PALS/MOLLE fasteners in place, I barely even felt the pack shift from the extra weight. The low profile and rounded sides meant I had no snagging and better yet, I could even manage the fabled over-shoulder draw much loved by Hollywood, (as long as a buddy unclips the Fastex clips for me) However, this has allowed me to carry, comfortably and securely, two of my favourite tools of localised destruction.

Great piece. Well made and exceptionally well suited to the role it was designed for.

Wish Lust: Skinth Solutions - TrailBlazer Pouches

Swiped from Skinth Solutions website

I have now had several people point me towards these pouches for some time now, and whilst I haven't managed to lay-hands on one, I still wanted to show them off, because they appear to have tremendous potential.

Although Skinth offer several different options of pouch, but I'm going to focus on one in particular.This is the TrailBlazerw (woops, [edit], Skinth let me know these pictures are the slightly larger Catch All ) which was was originaly designed by Skinth toorganize fire starting and small survival kits.

Their other pouches are different sizes, shapes, but all follow the same design philosophy, so this will give you a good idea of what they're about.

Constructed from 1000D Cordura, with V70 stitching, this is a hefty pouch, and is fitted with Fastex style buckles and is 3″ wide, 1.5″ deep and 4″ long.

Swiped from Skinth Solutions website

Internally, in the main compartment there is a divider to slide a regular sized Altoids tin survival kit against the back. Each side tube pocket is 1.25″ in diameter, lots of room for items and even 4″ multitools.

Swiped from Skinth Solutions website

As well as this there are as a standard feature, offering 5 pockets to organize small items. This "Penta-Pocket" system (one behind each side tube, one 2.5″x3″ flat pocket and two 1″x3″ in front) allows for a variety of small items to be secured. I can envisage ferrocerium fire-starter rods, Lockpicks, a WTF tool or any of the other small, needful items that I've covered thus far.

There are elastic pen-flaps sewn to the front panel, for pens, safety sheers or a clipped knife, adding to the gear-density of these pouches.

The backing of the pouch comes with 2″ wide hook-and-loop closing belt loops, but the joy of Skinth pouches is the "optional extra" options they offer. In the case of the TrailBlazer, they offer pairs of stainless steel belt clips, MOLLE attachment webbing or even horizontal strapping for bag strap carry. Key hanging loops, 13 colour options, even bag hanging straps.

These are a well designed bridge between chest-worn admin pouches and satchel like pouches. Stores your gear, where you want, for when you want. I've seen things like this being worn by nurses and EMT's at work, and would love to get my hands on one of Skinth Solutions versions.

Review: Hazard4 - Ventrapack

I've been really pleased with the Hazard4 LaunchPad iPad case, and the Loader RG holster harness that I have covered previously. The Loader RG harness is part of my EDC, I don't feel dressed without it. 

 When I placed my last order with Hazard4, I picked up a couple of items, and this was one of them. I have covered a couple of admin pouches before, and am a big fan of my ZuluNylonGear CAOS pouch, as well as my really good Hill People Gear Runner Bag.

This is the Hazard5 low-profile chest rig, the Ventrapack.
The first thing I found was that it was considerably bigger than I had expected, at 31 x 26.5 x 3 cm (12.2" x 10.4" x 1.2"), if I had checked their website or even counted PALS/ MOLLE strips, I would have worked this out. However, size is not a concern for me. Sure, it matters, but I like variety! 

With 6 channels and 4 rows of PALS/MOLLE, and two rows of loop-field, you get an idea of the size here. A Faastex style clip on the front gives a quick secure option, as well as the twin zipper releases around the perimeter. This then reveals the interior, which is really very cool. 

Webbing retainers hold the "front" of the platform, to make a shelf, with an included clear document/map window with a stiffened and quilted padded micro-suede backing (much like in the LaunchPad) with two little hook and loop tabs which fits and secures an iPad nicely. A cable feed port is a really nice addition.

That shelf also acts as a work-space, which is matched by a tool shop's worth of storage on the "back" of the platform. Three pen holders, Two multi-tool sized pockets, twin elasticised cylyme/small tool holders on top of a wide but shallow pocket make the first row of pockets, with a second layer with two PDA sized pockets, and a wide and tall, hook-and-loop closed pocket. behind all of these is a full document sized panel, with a dummy-cord'ing loop. 

I filled out my pockets with a collection of little tools; my Spyderco Harp tool, one of my WTF multi-tools, a set of lock-picks, and several practice locks. I also have my APOC Geiger counter. Because I'm awesome.

The back of the pack shows off its attachment options. Four sets of webbing, attached to each of the four corners of the pack enable the wearer to lash it to the straps and body of a backpack. Fastex buckles provide quick attachment and removal of the Ventrapack, as well as ease of fitting.

Each of the four sets of webbing are terminated with a hook-and-loop strip, which enables you to both bundle loose webbing, but also attache the strap to other straps, without the need of an additional buckle. 

There are D-loops fitted to the top two straps, as well as the front Fastex clasp, all of which can be used for additional attachment. I found that my Portuguese sinnet paracord lanyard for my multitool, which I attach to both belt and tool with a small carabiner, perfect placement for this pack, making a very effective hip-bag for hands free courier-style. 

You could just as easily throw a shoulder strap through those D-loops and wear it as a messenger-bag.

 I really like the variety that this pack offers me, especially for times where I know I will be needing to carry a bunch of hand tools, but also needing my hands free. Roof crawlspaces, zombie-choked freeway, half-way up a power-pole, having your tools to hand and your movement unrestricted is a real boon, and this is certainly one way of ensuring it. 

The Invista® 1000D Cordura makes for a rugged and sturdy pack, which is good for both your tools and your body, and I especially liked that the bottom of the pack had a toughened strip, to further guard against abrasions. 
 
The fact that the back of the pack is lined with a breath-ability enhancing mesh, forming an additional document pouch as well as having bottom pockets to stow the straps when not in use, when the pack is attached by D-loops, or carabiners off a hip, or the like.

As you can see, it does have a big foot print when worn on the chest (although I'm a skinny fella), it doesn't restrict arm movement overly, and sits very securely. All in all I am very pleased with this additional to my technical loadout. Next time I have to fix something in a hard to reach area, this is coming out to play!

Review: Zombie Outbreak - Trekker pack

Here is the second of the Zombie Outbreak packs that I was sent by Global Gear, a follow up of the Hydro-Bugout pack  I reviewed a little while ago.

This time it is a slightly larger and feature rich pack, the Trekker.

The first thing that struck me about this pack was the range of attachment points, it is simply covered in PALS/MOLLE loops, loop-fields, shock-cord loops, and that is before you even get to the compartments.

Made of the same cordura-like fabric as the Hydro-Bugout, one of the things that I noted with this pack was the significantly better stitching and finishing. The MOLLE loops were even and cleanly spaced, the loop fields were heat-sealed and the webbing was all seated much better.

I gave this one a bit of a workout at a recent indoor lazer-tag event, where i loaded it up with my gear, change of clothes, bottle and the like.

This 30L, 33cm  13"(W) x 53cm (21") x 13cm (5") pack is backed with a breathable mesh and features contoured shoulder straps with both D-rings and webbing loops for attaching accessories. The adjustable pectoral strap will slide up and down a fair way to give you a comfortable carry, and the webbing all mounts to the pack by secure looking construction. 

I liked that the drag-strap poked through the opening of the front flap, and was mounted to the back, rather than the top of the pack, it gave me better balance when picking the pack up, I felt.

The front of the pack features a very large flap, that covers over 1/2 of the front, and has a number of pocket (i'll talk about those a bit later. The whole thing covers the front of the pack, except for the interesting cut-up where the drag strap pokes out, and presumably where you could get grab-access to the internals of the pack without exposing it all, or run hydration tubes or comms lines.


From the side you can clearly see the five rows of two channel PALS/MOLLE webbing, along with the dual fastex-style buckles making up twin compression straps on the sides, allowing you to really cinch up the pack to keep it tidy.

You can also see just how far that front panel will extend, this being an unburdened and only lightly stuffed demo, if needed, that front panel could be buckled down way to the bottom of the front, giving you serious compression and packing minimalism.

I had a problem with the ends of the compression webbing coming loose and falling out of the buckles, mostly I assume because they weren't under tension, but also because of the way they were finished (a diagonal heat-cut, rather than a hemmed tab, but this was a minor inconvenience, as I didn't use them much.

The front panel features a pocket right on top,
with a "back-opening" zipper closure, and is itself topped with both a 2 row, 4 channel PALS/MOLLE field, but also a sizable loop-field for affixing patches (as I've done here with one of my TAD patches.

Below that, a zippered pocket opens up to fill the bottom of the flap. On top of that however, is an interesting addition. A shock-corded set of webbing-loops, over the top of another loop-field, and all of this is over a tube-like opening that runs horizontally below the middle set of loop-filed seen here under my "Zombie-Hunter" patch.

The whole front panel is closed and locked down by the really large buckle, which feeds through the front loops of the bottom of the pack.

Under that front flap there is another set of two-row, four channel PALS/MOLLE webbing, this time all loop-field equipped, below which are two more pockets opening up into separate compartments at the bottom of the pack.

The male section of the main front closing buckle is seen here, and this has webbing that feeds through yet another set of loop-field PALS/MOLLE straps, although these are broken up by the extra-wide buckle-strap, giving two sets of three by two loops.

The two main compartments open up beyond these.

The "front" compartment is the bigger of the two, with a full width, top to bottom space. It opens via double ended zippers, and will open all the way to the bottom when needed.You can see here the shiny backing of the fabric used throughout this pack. I don't now what it is, but it feels like some kind of thread-impregnated vinyl.

The internal materials (such as that seen in the large panel-pocket here) has a lightweight tent-feel to it.






The "back" compartment features a padded and hook-and-loop tabbed laptop compartment / hydration pouch/ plate carrier pouch.

This whole compartment only opens 3/4 of the way, ensuring that you don't spill all your needfuls, or that it is not dragged open by the weight of the forward compartment and pockets.

The twin sets of compression straps also act in your favor here, holding the pack open, whilst still giving you access, even when bulky items may hinder zipping it up.

All in all this is a decent pack. I liked the various options for mounting accessories, and the range of pockets throughout the outside, to stow smaller items, without having to open up the main compartments. The large over-flap was an interesting addition, and could almost certainly work like a beaver-tail to stow larger items.

Review: Tactical Tailor - Concealed Carry Sling Bag

This is the second item in my series for David Reeder of KitUp! and Casey Ingels of Tactical Tailor, and I am thrilled to be getting my hands on another pre-release item, which made it's way over the Pacific to me here in Australia. Due to be released later in March, hopefully this review will stir your interests and imaginations.

I'm always keen to include inconspicuous items to my repertoire, both in my EDC, and how I go about lugging it. Recent air flight trips reminded me that having a high density and easy to store carry-on bag is very desirable. My trial of the Zombie Outbreak Hydro Pack was a good experiment, but when it comes down to it, I want something rock solid. I am happy to say that the Concealed Carry Sling Bag by TacticalTailor is that. Made predominantly from a 500d Cordura, in blue-grey and black, this is a sporty looking pack that has a sting in its tail.



This is an ambidextrous pack, with a single central main padding shoulder strap, with twin detachable straps, with an interesting styled clip at the end of each, anchoring to a ring at the end of the shoulder strap. Each of the detachable straps features a long webbing, sufficient to create a "third leg" style wrap around connection, to keep the pack stable on your back when running, climbing and generally adventuring.

The shoulder strap is heavily padded with a breathable mesh covering, giving both really solid padding, broad coverage over the shoulder and a wide attachment to the body of the pack, giving a very stable connection. The top of the strap to pack connection also features a very sturdy carry handle. It appears to have a Helium-Whisper compatible loops down towards the strapping end, but I don't have anything compatible to test that out on.

Another nice feature is that both detachable straps have a padded "wing" for where the webbing would otherwise dig into your kidney, both of which have webbing stitched in, not quite PALS/MOLLE proportioned, but certainly compatible, if you wanted to affix an accessory. Topping it off, there is a pocket behind the wings on both sides to stow the detached strap, if not being used as a "third leg" to get rid of dangling cords for a more streamlined fit.

Inside the main compartment, which has double zipper pulls, each with a hefty cord pull-assist, which works to give out a full opening compartment, which as you can see can fit a variety of goods. When filled, this compartment nicely fits the depth of my Zombie Squad Nalgene, so that makes a good guide for how much stuff you can lug in this section.

Inside the front compartment, which is fitted with a long daisy-chain of webbing loops running vertically over it's surface, and sporting another two cord-fobbed zippers for closure, you'll find the first of two hidden surprises is pack had to offer. Fitted to the loop field that makes up the entire of the back surface, is an adjustable pistol holster. This hook-backed panel loops around on itself to give an adjustable width, and has an accessory strap to accommodate the length of your pistol. Off to the side of the panel is an elastic loop to hold a spare magazine. I've not decided what I will use this holster for, not having a pistol to carry, myself, but I'll be sure to find something to use it for. This compartment easily holds a Nalgene bottle, with some spare room at the sides.

At the very back of the pack is where the real secret lies. Behind a very inconspicuous zipper, blended right in with the seam of the grey Cordura and the meshed-foam backing is another cord-fobbed zipper, (one for each side of the bag for true ambi action) is the final compartment, held snug against your body, for the concealed carry win.

Again as with the front compartment, this has a broad loop-field panel, encompassing the entire back, and comes with a very thorough admin panel, but this can be fitted to the front compartments panel, swapping out to suit your needs. Currently I am keeping my iPad in is compartment, until I can think of a better use for it, but as it is, it's a very secure and stable storage pocket, with a billowing inside backing to accommodate your packing needs, without giving away your secrets.


Here is that admin panel, showing off its five internal elastic webbing loops, for pistol magazines, flashlights, multi tools or a variety of other chunky items. On the outside, two more wide elastic loops run lengthways, each topped out with a second, narrower elastic bang, sectioned into two, ideal for pens, glow sticks and markers. Finishing it off is a zippered pocket, giving you a very versatile and being hook-backed, modular piece of accessory to suit your needs and loadout.



Lastly, here's a shot of me having slung the bag from back to front, showing off how level it rides. From here I could quickly access all three compartments with a yank of the cord-fobs, and get at my needfuls. Ideal in a travel situation, ideal in a hazardous situation. When I'm hauling a big load on my back, but still want access to my iPad, papers, food or EDC kit, this functionality, being able to have a comfortable, slung pack at my belly comes in very handy. Whilst a bit too small for my comfort as an everyday pack, (because I haul a lot of junk around) my partner Omega was quick to snaffle this one up as an out-and-about pack, that wouldn't weigh her down, be too "hooah" looking and tough.

This sling bag is all of that. And more.

Review: Platatac Light Field Pack

Time to have a look at some of the big-bags!

When I started doing more camping, whilst in Calgary, I got my first "big" backpack, (which I may dig out and go over, some day soon). Whenever we traveled as a family as I was growing up, we had a policy "pack only what you can carry" so I got pretty good at packing well, and also lugging heavy bags. A better bag means better packing, as well as easier carrying.

Having learned these lessons, I have frequently loaded my EDC bags to such a point that they became unwieldy, leading me to downsize from my Crumpler Messenger bag, to my faithful and very versatile Platatac Bullock Echo but there are times when you really do need to haul a bunch of stuff, either bulky items, or in high quantity. When this is the case, a little day pack just wont cut it. You need a proper backpack.
This is the Light Field Pack from Platatac, and it does the job!

First up, like almost all of the Platatac bags, this one is made from the rugged 1000d Cordura I've come to expect. Slick and hardy, no rough finishing, just an all over, well put together package with quality materials. The pack comes in two main components; the main body, and the removable helmet cradle and internal organiser.

The front of the cradle has 6x8 PALS/MOLLE, including a 4x2 loop field for name-tape, patches and the like. It has Fastex style buckles to connect to the compression straps on the main pack in three different locations, top, middle and bottom.

The strap-side of the pack is a sculpted, heavily padded and well fixed set of straps, with built in D-rings, adjustable and movable sternum straps and well placed, Fastex-style clips at the base of the traps for both quick release, but also comfort when wearing.

Here's a side view, showing off the 35L  capacity of the main pack, as well as the extensive 5x8 PALLS/MOLLE channels. The compression strapping is maintained on the sides by sets of Web Dominator clip. The flap at the top right of this picture is an access port, for hydration tubes, cables or running line. 

You can also see the triangular "wing" that the shoulder straps connect to the pack via on the bottom right, as well as the helmet cradle. My OpsCore style bump helmet fits nicely in the cradle, but I've also used it extensively as an "extra cargo spot" to carry my bundled kendo keikogi which is both bulky and needs airing, after training, I can tell you.

I've found that I have been able to rapidly adjust the tension of the compression straps to fit my load with a quick pull and readjusting of the leftover webbing via the Web Dominators. The nylon eyelets the webbing runs though doesn't interfere with the PALS/MOLLE channels, which is great for those who like their pouches as much as I do.

The inside of the fully openable main compartment is also fully PALS/MOLLE lined, for all those pouch-addicts I just mentioned. As well as a 3/4 length zippered pocket on the inside, the outside of the  main compartment flap also features a deep zippered pocket, and another, very large loop-field, for more patches, ID and the like. 

You can see here that I have stored my kendo armour in the main compartment, with the big helmet, gauntlets, chest-plate and groin plates wrapping the lot up. It was a tight fit, but once the pack had loosened up, I have been able to cart my whole kendo setup (baring the shinai/bokken) in one bag, with a drink bottle attached by PALS/MOLLE to the outside. 


Inside that main compartment there are a vast array of options as well. On the right side, a very large zipperable pocket, good for documentation, maps, briefings and the like. The bottom of the pack features another of the zippered pockets, good for tools and other heavy items. The back face includes a third zipperable pocket at the mid-line. 

As well as the zippered pockets, there are two elasticised hydration pockets, one at the back, and another on the left side. loops throughout the internals give a variety of dummy-cord, or shock-cording options, as well as acting as hanging points for hydration bladders. I'll be fitting a bladder to mine, to take the place of that externally attached bottle holder. 1L just isnt enough water for me after training, and the added weight going in isn't an issue. It will get lighter before I get home, that's for sure.



There was one more zipper, hidden away at the bottom of the back of the inside of the pack. By turning the pack inside of itself, you gain access to the built-in, moldable lumbar support.

This stiff plastic body has a reinforcing aluminium bar, inside a nylon sheath. This can be molded to offer the best support to the pack, and it also gives the whole thing a considerable amount of rigidity, making for easy packing, unpacking, and sitting up, when being accessed.

Drainage holes throughout the pack ensure that unexpected (or deliberate) dunks don't leave you hauling 35L of bilge around with you either. Stitched or grommeted, I'm glad they're there.

 

Another great hidden feature is the hip-belt pad, which as well as featuring a 3x4 PALS/MOLLE surfacing, and deep padding. The hip belt will clip together to give a very stable belt, perfect for long hikes with a heavy load. For those times when you don't need this kind of extra support, and don't want all the extra real-estate hanging out in the breeze, they have their own little pockets, which are hook-and-loop closing. When tucked up they are hardly noticeable and certainly don't add to bulk, or take away from storage space in any appreciable way.

Here's the inside of the helmet cradle, showing off the webbed "hinge" between the PALS/MOLLE attachment and the front flap. This forms a very useful "bucket" that you can drop your helmet, or other cargo into, secure in the knowledge that it will stay put, and you wont loose any little items"out the sides" between straps as you might in a open-bottomed beaver-tail. 

You can see here the three sets of compression clips, as well as one of the multiple loops for running a retention cord, or shock-cord through. Loads of extra features!

Here's the inside of that helmet cradle front-panel. "The Office", as Sam from Platatac called it.

On the inside of the lid, are two mesh-lined, zipperable pockets, one running the whole length of the panel, the other, midway.

On the bac of the compartment, two more zipperable pockets, the lower of the two being bellowed for easy stuffing as well as three elastizised pockets at the bottom.

This is a serious admin pouch, and there is plenty of versatility to cover all your gadget storage. I have carried my iPad, chargers, pens, paperwork, and food in this section, but be aware, having a helmet in the cradle will press up against the contents... pack wisely!

As with the rest of the pack, all the zipper pulls are threaded with paracord, for ease of grip, and deadening the metal-on-metal clinking.

Here is the whole pack from below, you can see the grommets on the cradle, both inside and out, as well as the sewn-in drainage eyelets of the main compartment.

You can also see the PALS/MOLLE connectors of the cradle piece tot the main pack, with four tabs, in channels 1, 4, 5 and 8. Bear this in mind if you plan on trying to swap the cradle onto any other packs.

Lastly, check out the 3x8 PALS/MOLLE on the bottom. This pack is BUILT for accessories!


Lastly, I wanted to give you a few shots of the pack on me, whilst bearing a load.

DEPLOY TACTICAL BABY!

Sitting happily in the back of the pack, with two sets of compression straps securing her, Tactical Baby was comfortable enough to be walked around for a while, until asked to stand up and wave.

At no point was the pack unstable, or did I feel any way at risk of spilling my precious cargo, (although I made sure I was over the bed when she stood up)

She just held onto the built-in drag handle and I have my very own Pink-Yoda ,

This is a serious pack, good for times when you need more than just a day-pack, but not quite the kitchen sink.

If I had any gripe with it, it would be the way I was using the bottom compression straps when I wanted to open the main compartment, they held it shut beyond the zipper pulls a little, but not so much as that I couldn't easily unload, just not "flat".

It is thoroughly dependable, comfortable to wear and haul loads in, even in the muggy Melbourne summer, slings on and off easily, without snagging and is filled with features.