Wednesday, March 25, 2015

Review: UVPaqlite - Mule Light Orb

As first published on BreachBangClear!


I do so love my glowing lights. There is something very satisfying about a renewable light source that is charged by the sun to mark out the dark corners of a room, locate a bag or device in the dark or even to ID friends vs foes. I have gathered quite a collection of glow in the dark items over the years, all starting with those little stars you put on the ceiling to make constellations, as a kid. My girls have them too, now.

I've been an even bigger fan of the products from UV PaqLite for some time, I keep them in my packs, hand them to my kids when we go out at night and generally have them on hand for those "where did everybody go moments, where I might need more than just one of my multitude of flashlights.


One is none, two is one, and batteries run low. I kept tabs on the family team of Steve Nagel and Alexis Nagel, and their inspiration, gun-toting outdoors-man Uncle Vernon, who was their inspiration. Their basic product is based around the fact that if you embed the raw strontium aluminate crystals in a solid resin you get a long glowing light-source, in a solid, stable and resilient unit.

The problem with all this type of glow-in-the dark products are that they all still need to be charged to work. If your emergency happens when you're already in the dark, or the light is in the bottom of a bag, you are not going to get much use from them. This is where the folks from UVPaqlite came up with another option. They embedded a LED in the middle of two halves, with USB rechargable lithium ion rechargeable batteries, light-detection sensors and some clever circuitry to give you a hybrid light that gives you an infinitely renewable GITD shell and long lasting electronics that can hold 100hours of illumination on a single charge.
So the UVPaqLite people have came up with a hybrid model.

To operate the flashlight mode, you press the button built into the middle band. This illuminates one side of the orb, right through the embedded crystals, and casts a very satisfying light, as well as charging up the GITD crystals. Holding the button until the light flashes sets a timer mode, which will set the LED's on either side of the orb to flash every two minutes recharging the crystals to peak performance. The batteries will hold around 100 hours of these flashes.

An even smarter feature utilizes a small photo-receptor built into the side of the Orb, just beside the USB charge port.
 Holding the on-off button for a double-flash of the light letting you know you've activated the light sensor and now the Orb will only function in hybrid mode when it’s dark. It lights up for about 4 seconds, which can be a bit disconcerting if you're trying to get to sleep and it's dangling over your head. This means you can set it up wherever you want it and forget about it. Clip it to the side of your pack with the built in split ring and snap-clip, hang it from the top of your tent, or drop it in your bag.
 It will self-charge the crystals as you go about your life. This is really good for the forgetful or the over-packed.

The on-theme USB cable they supply is just long enough to do the job and not so much to get in the way. The 45g (1.5 oz) Orb is  37mm (1.4") x 25mm (1") is a little big for a key-fob, but perfect for pockets. I've had it on the side of my Hazard4 Escape RG harness for a while and didn't find it getting in my way at all.

It's weather-resistant in its native state, meaning it can take some rain and exposure, but don't soak it. If you're expecting a big wet, they've thought of that too. The dive capsule is rated to 100m (300') which is more than three times the depth I've ever been rated to SCUBA dive to, but I suppose some day I might want to tag some salvage and come back to it with a ROV. 

I'm a lot more likely to be yomping through a storm though, so the extra weather protection and night-swimming illumination is what appeals to me. You can't access the button from inside the capsule, so whatever setting you have selected before you hit the water is what you're stuck with, unless you feel brave enough to pop it open in the wet. In the capsule the Orb is positively buoyant and floats around happily on an even keel. It's a well designed accessory, with a smooth threading action, and a sturdy o-ring and flat-folding attachment ring.


I was really impressed with both the GITD illumination that the Orb offered, and the flashlight mode. It certainly has a lot of potential to give medium term, renewable and reusable illumination, on-demand, really the best of both worlds. Since getting my hands on the UVPaqlite range I haven't used a cylume stick, but I've kept some around just in case I've been caught out without an immediate light source and now that I have the Orb, I might just pass them off to the kids to have one last hurrah.

Sunday, March 22, 2015

Review: Fishbones - Gravity Hook

I've been lucky enough to snag a couple of prototypes for a Kickstarter project that has just a few days to go, and I really wanted to get the message out to you all, so you can take advantage of the situation, and back this awesome project. This comes from the same folks that brought us the Fishbones and Piranha gear ties.

This is a tool, called the Gravity Hook, which  can be used just as a 2 pronged hook, as a grappling hook with the addition of a cross-hook or, in its primary format, as a grabbing hook.

It is designed to "bite" objects that might slip out of a grapnel, much like The Claw, from a claw game.

A complete assembly is made up of includes 3 linking bars, 3 "hammer" arms, a cross hook, and nut-and-bolt hardware. A bow-shackle at the end gives you a cord-attachment option.

The whole assembly weighs around 360g in its stainless steel configuration, and a mere 60g in the high-performance Derlin plastic.

Notches cut into the linking bars as channels allow you to affix o-rings, which really help when tightening hardware. They are used to help keep the jaws tightened around the cross-hook whilst set up in the grappling hook configuration, and also during modification by keeping the parts lined up, to let you thread the bolts more easily. I've covered a small grappling hook before but this blows that right out of the water.


Bear in mind that the two version I have are prototypes, and by following along with the Kickstarter campaign there have been several improvements thus far. Notches in the jaws where the cross-hook sit should eliminate the slight wobble that the base of the cross-hook gets when in the grappling hook configuration. This was more noticeable in the Derlin prototype, but from the 3D renders I've seen this will be completely eliminated in the production model. The Derlin model also has a double set of o-ring channels, one high, one low.

I tried the low set as a place to store the o-ring I was using, but found that the added tension reduced the bite that the hook had, and combined with the low weight of the Derlin version, I found more success with the o-ring slipped off the hook entirely. The other difference in the two models are a couple of extra sets of holes in the Derlin version, presumably for threading extra bolts through to "lock" the grappling hook in place.

Two designs of cross-hook are seen as well, the solid version in stainless steel retains the weight and all the strength possible, but the cut-away version more closely matches the hammer-arms of the main body, as well as acting as a gear-tie, following n the footsteps of the Fishbone and Piranha.

Compact enough to be stowed on a back pack strap, I also found that the pair of Gravity hooks, along with their cross-hooks, and a length of paracord fit nicely in a Platatac FUP pouch. I carried both around in my cargo-pants for a few days, trying them out on various things to grab and hook, and  found that I needed to be careful which side the shackle bolt was sitting but the rest was easy to carry comfortably.

Here's a safety note: the Gravity Hook was specifically designed for retrieving kit and grabbing things. It has not been tested or certified to bare human weight. The guys who designed them have done some car-towing and some anecdotal destructive testing but stress to never use it in a situation where it's failure or dislodging might cause bodily harm or property damage. As with any climbing or salvage work, always use good judgment. You are responsible for your own actions and decisions. In an emergency, you might need to take extraordinary measures, but the risks are also extraordinary. Failure to follow these warnings could result in property damage, severe injury or death. Be prepared for anything, don;t become a casualty.

So, all that in mind, I really like the Gravity Hook. It's going to be a part of my EDC from now on (because I like to roll as heavy as I can get away with). Having this kind of gadget is exactly the kind of thing that I get to be a hero for carrying, at some stage, always. The Derlain version means I even have an airport safe version to take with me on any abrupt mountain-side landing trips I might be on.

Get in quick, back them on Kickstarter and remember: Always prepare to be a better version of yourself. Unless you can be Batman, then be Batman.


Wednesday, March 18, 2015

Review: Gerber - Crisis Hook knife

Here is another new addition to my collection that comes out of my need to replace items lost when my car was broken into.

I had been keeping a Benchmade 8med Rescue-hook in the sun-visor MOLLE keeper from Zulu Nylon Gear in case of in-car emergencies, which in turn was an addition along with the Benchmade Figure 5 after I lost my original rescue hook, the Gerber Strap Cutter.

So, now I've come full circle with the Gerber Crisis Hook.

I really like this kind of tool. I go to events where fixed blade knives are restricted, but having a blade that can be used to get myself, or others out of trouble without being a big bad pig-sticker.

The Crisis Hook is fitted out with an even bigger handle than any of the previous cutter's which is covered with a textured, skeletonised  rubberized coating. This is shaped with finger groves on the inside, and crenelations for gripping both back and front. The steel that runs through the entirety of the tool is 420HC stainless steel.

The cutting edge is a single bevel housed within a blunt hook as you would expect from this kind of cutter. The entire tool, with its long handle, it a considerable improvement over the three previous rescue tools I've had.



Fitted with an oxygen wrench and a glass breaker point on the pommel with a loop hole for a dummy-cord, this is a robust and hefty tool, and it comes with an appropriately sturdy
friction locking clip sheath, made from the same 499 ballistic molded plastic as the handle.

The sheath is fitted out with a buckle strap, and can take either the included MALICE clip or, as seen here, a single PALS/MOLLE gripping clasp. It held secure to both my chest and on my hip for a weekends camping adventure recently, but was simple enough to shift in the field, even on the go without all the fiddling needed with the MALICE clips. It cuts like a treat, going through seat belt webbing, heavy strapping, 550 paracord and with a little more effort, thick cable-ties with single solid pulls.

I have no doubt that I could cut someone from belt to boot in a few simple, quick cuts if needs be with this. The over-sized handle affords a really solid grip, even with gloves on, and even when wet. It's not a subtle tool, but then again, its not meant to be. This is for getting you and your buddies, or loved ones, out of a jam. So far, it's done nothing but winning.

Tuesday, March 17, 2015

Sneak Peek: Fishbones - Gravity Hook

The guys who brought us the Fishbones and Piranha gear ties now have these awesome Gravity hooks in progress on Kickstarter. Part Mechanical Claw, part Grappling Hook and sent me sent me these two prototypes, one in steel, the other Derlin ... all awesome. Check out all the details on Kickstarter for now, review to follow here too!

Tactical Baby: "Those are Batman's..."
Omega: "No darling, they're Daddy's.."
Tactical Baby: nods grimly...

Go back them ... be Batman!

Monday, March 16, 2015

Review: Platatac WUP

I've been collecting pouches for quite some time now, because I've found that there is always room for more pockets.

I've covered all manner of pouches in the past, from the very large, almost a bag in itself, to a variety of smaller utility pouches, down to the very small indeed. There are times though when a pouch needs to be a bit bigger, for large or bulky items, without wanting to add a whole other bag to your loadout, or better yet, having that item out of your existing pack. Thats where something like the Platatac Water Utility Pack, their WUP, comes into its own.

Large enough to fit a Platatac 1 litre Flask or a 1L Hydrapak Bladder,

or in my case, a 1L Nalgene bottle. The WUP fills a niche not unlike that of the Tactical Tailor Hydration Joey pouch, but in keeping with the Platatac range it is fitted out like a bigger version of one of their smaller pouches.


With both a chunky Fastex clip and a broad swathe of hook-and-loop the WUP doesn't lack for closure options, and security. Inside there is an internal loop with elastic shock-cord, to cinch in the lip of the pouch, giving even better retention.

I really liked that the Fastex clip strapping loops back through a loop on the lid of the pouch in a solid V shape, not only does this support the lid, but keeps the straps from flopping about and getting in the way.

A drainage grommet in the bottom of the pouch is a really good addition, something that you really appreciate if you've ever taken a dunk with a bunch of kit on. Especially if you then need to haul yourself up and out, and keep on running.

This is a pretty big pouch, with at least a 1L capacity, and it is held secure to you and your gear with a 2 channel, 3 row set of PALS/MOLLE on the back, ant its set up to be able to attach using 5 rows on the host side, giving a really secure fit for those heavy loads.

There are also three rows of two-channel loops on each side of the pouch, for attaching accessories to your accessories.

I took a couple of these on an adventuring weekend recently, one with an old style canteen on a Platatac Bongo battle belt, and the other on the side of a plate carrier covered in other pouches. Neither were ungainly, overly bulky and anything other than functional. Offered in both Multicam and traditional khaki, the two I picked up are in MC, see how I venture into the modern era!

Wednesday, March 11, 2015

Home Front: Australian Hazards

I thought I might have a go at giving an insight as to the horrific and terrifying conditions that all Australians contend with from the cradle to the grave. First up, we need to discuss some myths: Drop Bears only ever attack tourists who are not anointed with sufficient Vegemite. The Australian Hoop Snake is NOT larger than its North American cousin, but it is purported to be more deadly. Australia is home to a variety of dangerous creatures, and conditions, and yet, even though its a matter of pop-culture, and they are even fictionalized in Pratchett's "XXXX", what are the facts behind it all?

However, Australia really DOES play host to a number of very dangerous plants and animals, as well as some rather extreme weather. The animals are nicely summarized by the Scared Weird Little Guys

Depending on what survey you look at, from the Top 30 Deadliest Australian Animals which runs from Box Jellyfish through to Giant Centipede (with the regular honey bee being #2, incidentally). Or take the more condensed listed but still exaggerated Top 10 Most Dangerous Animals list. There are some pretty scary animals on those lists right?


Who wouldn't be freaked out by the 7m long Saltwater Crocodile, Funnelweb Spider or the Inland Taipan? Well, as it turns out, including dumb-assed tourists and drunk local lads who ignore signs, the very scary flora of this Great Southern Land kill about 5 people a year, plus or minus.

We have a significant bushfire risk, usually at the tail end of the summer time, and I've covered these before, and sometimes we even get heatwaves that set new records for both duration and intensity.

In fact, while 173 people died in the 2009 Black Saturday fires, , 374 people died from heat stress around that time. The CFA upgraded their alert signs (many of which are now remotely controlled)which now go up to beyond EXTREME. Catastrophic is the new rating. It's rare to these signs below High, which tells you something about how we deal with these concerns. By not being concerned.

The same goes with the dangerous animals (and occasional plants) we have here. We're generally unconcerned.
I gave all of these facts and fictions some more thought, and hit up the Australian Bureau of Statistics 2012 Causes of Death, Australia records and did some analysis myself. Note: some of the numbers in the charts don;t add up, as there were some categories I didn't include because they were fiddly tiny numbers.

In 2012, there were 147,098 reported deaths. of these 93.7% were disease related. Of all those disease related deaths, only 1.7% accounted for ALL infectious diseases. Cholera, plague, HIV, TB, necrotising fasciitis, all the 'Flu strains, all of them. I'll just leave this here...

The scary thing there is the other 98.3% of disease deaths; cancers, heart and circulatory system, gastrointestinal and all the other things that can go wrong with our bodies accounted for  the overwhelming VAST majority of deaths in Australia in 2012.

Of all the deaths, that were NOT disease related, the "External Causes" that 6.3% of deaths in Australia, some 9275 or so people, I wanted to look into what caused that.

Suicide or other forms of "intentional self-harm" accounted for around a quarter, with our road-toll being around 15%. Both of these things are rather awful, and in my mind, preventable in some capacity, agencies like the TAC  and  the various suicide prevention agencies that exist, do great work. I don't have any firm stats on Australian Veterans suicide rates, but its reported as triple those lost in combat in Afghanistan.

I didn't look any deeper into the medical complications stats, but any surgery or intervention is risky. The nearly 50% "accidents" category was interesting. Falls, account for nearly half of these, with "poisoning" and various exposures for the majority of others. Thankfully, our "home is girt by sea" water awareness keeps drownings at low levels, interestingly as of 30 June 2001 more than 8 in 10 Australians (85%) lived within 50 km (30Mi) of the coastline of Australia.
What is really interesting is that "Forces of Nature" (which I presume is floods, storms, rock-falls and the like), account for 34 deaths and venomous animals (and plants) only account for 5. In 2012 there were 12 people killed by land-animals that were not dogs or rats (moooooooo!!!) and 2 by marine animals (think sharks). These fell under "animate mechanical forces" along with combine harvesters and hydraulic presses.

Hardly the Island of Death that people make Australia out to be, if you look at the numbers ....

Then there is the Most Dangerous Animal. Assaults in Australia in 2012 accounted for 273 deaths. 40 to firearms, which are heavily restricted, 97 to sharp objects the likes of which you'd find in any kitchen, workshop or woodheap, and 24 from blunt objects (like the chair you're likely sitting on). You can do the math. Humans are about 20 times more likely to kill you than all other animals on (or swimming around) the continent.  
So, when you're planning your next trip, before you cross Australia off your list for being to damn scary, over-run by killer giant spiders, sharks and Mad Max castaways, consider the true killers ... 

Tuesday, March 10, 2015

Review: Voodoo Tactical - Open Top Single Magazine Pouch


When I backed the MS Clean Kickstarter project, which I covered recently, they also threw in, as a bonus stretch item,a PALS/MOLLE pouch to house the system in. Originally suggested to be one of the HSG Tactical Taco pouches, to keep costs down they settled on the simpler Voodoo Tactical Open Top pouches which are no slouch either.

I've covered a couple of open-top shingle style pouches before; the ones built into the Platatac SCAR mini-chest rig and also the Platatac Modular Radio Pouch. Generally, I prefer my pouches ti have a lid, or cover of some kind, because I am generally not using them as originally intended. So, that in mind, here's what I can tell you about the Voodoo Tactical open top shingles.

These single-magazine pouches have a good solid finish, with 1000d Cordura as the base material, shock-cord and webbing loops, throughout. They feature a press-stud closing pair of PALS/MOLLE tabs in the lack to feed and mount on whatever platform you choose, and the tabs are reinforced with plastic internally to add some stiffness, aiding in both feeding, and sturdy attachment. The shock-cord is fitted with a looped webbing pull-tab, and it comes adjusted to fit nicely over the MS Clean case, so presumably they fit over a 30 round STANAG or MagPul P-Mag magazine as well.

The fact that it is a single case might seem a bit limiting when it comes to loadout, given that pouches like the Platatac FUP but because it is fitted out with PALS/MOLLE loops on the front (and side) it is possible to stack them quite easily. This may well add more bulk and weight to a double stacked set than would a dedicated double mag-pouch, but each pouch independently carries the magazine, so no worry of them rattling about. Again, remember, I'm not a shooter, get proper training and advice of experts, but it makes sense to me.

They are also a slimmer option for those who aren't planning to be as heavily equipped. Especially useful in those times where every gram makes a difference. These are a good basic pouch, and I could find no fault with them, they certainly are a good match for the MS Clean kits, and work as advertised.
Related Posts Plugin for WordPress, Blogger...