Video Review: United Cutlery M48 RangerHawk

This is me testing out the United Cutlery M48 Rangerhawk which I reviewed recently.

Hope you enjoy watching me chopping, piercing and hacking!

Click image to go to Think Geek's store

Review: Altama Tan Desert MilSpec boot

 

Pristine boot pic, lifted form Altama's website. Mine are LONG since wrecked :)

I thought I should give my trusty boots a fitting send off. I've worn Altama Desert Boots for a number of years, my current pair having been with me since at least 2005, when I was taken out bunny-hunting and have stains from that event that I never buffed-out.

I've worn these extensively during the hot half of the year here in Melbourne (I wear boots all day, every day, unless I am barefoot) and have never had a complaint with the fit or function.

From the ground up, the Panama pattern Mil Spec Vulcanized Rubber has been grippy on road and rough terrain, I really like the Panama patter, it sheds mud, gives purchase when clambering and wears well.

Over the sole, is a heat-barrier, to keep the burning-hot sand, rock and road from radiating up into delicate feet, and is topped by a removable cushioned polyurethane innersole. I had to replace mine a few times, just because of the amount of wear they got. Inside the boot is lined with Coolmax® aiding in wicking and keeping my feet dry and comfortable. The outers are a combination of tan suede and Cordura material, and the boots top off with a padded collar, maxing out at 9" high.

The boots have a nylon coated brass "Speedhook/Eyelet" lacing system, which really performs well, reducing snags and aiding in speedy lacing, even when I put these paratrooper/ ladder laces on them. These were the boots I wore whenever going camping, doing Stargate Lasertag LRP, training for and running the Tough Mudder, and recently, the Stampede. Even prior to the Tough Mudder, they developed a tear down one side, which I attempted to patch, but alas, the conditions of the events and the amount of pounding they got have finally spelled the end for this beloved set.

Compare the "as new" pictures with the tread pattern wear, and you'll get an idea of how much use these boots saw.

These were great boots, but now they are destined for the Happy Hunting Grounds, and I will be on the hunt for a new set of boots. Any suggestions for summer-boots? Or should I stick with tried and true?

Wish-lust: BioLite CampStove

In the lead up to the Hurricane Sandy landfall that hit the US East coast hard over Halloween 2012, I saw a great looking multi-function stove come past my friends feed, and it immediately took my interest. This is the BioLite Camp Stove and here's why I want one.

 The photo below shows a bunch of power-deprived NYC folks charging their phones at a  street-side kiosk running several of these stoves.

http://biolitestove.com/campstove/camp-stories/camp-stories-all/biolite-team-on-the-ground-after-hurricane-sandy.html

The stove itself is pretty simple.  With a packed height of 21cm (8.25") and 12cm (5") wide, weighing 935g  (2 lbs 1 oz) It is built to burn sticks, pine cones, pellets, wood chips, or other lightweight, small fuels and the frame will support a bot of up to 3.6kg  (8 lbs) or 3.6L (1 gallon) of liquid.
The real magic however, is that the orange module on the side is a thermoelectric generator.

As well as being fast to boil (a reported 4.5 minutes to boil 1 liter of water) the fire has a calculated 3.4 kw (lo) 5.5 kw (hi) peak output, which the thermoelectric generator can output via USB as Max continuous: 2W @5V, Peak: 4W @5V which apparently is sufficient power to charge and run most USB-chargeable devices including smartphones, GPS units, flashlights and the like.


Some reviewers have noted that these aren't especially efficient and I am looking forwards towards my first venture in this regard, with my tPOD1 Kickstarter on its way soon ... but the large scale BioLite, combining both power generation and cooking facility in one, sparks a distinct interest in my multifunction wish-lusting!

Review: Smith&Wesson - Tanto Neck Knife

This pretty piece of steel was un cadeau for one of my partners, given by the main organiser of an event she was helping to run last week. She was good enough to loan it to me to play with for the blog. This is the Smith&Wesson - Tanto Neck Knife

As far as "thanks for helping out" gifts go, I must say, this is one of the prettier I've seen.

The skeltonised knine is full-tang constructed, with zytel scale sidings and a kydex sheath . The blade locks into the sheath with a friction clasp, and is both light at 100g all up, and dainty in the hand, at 18cm (7") over all, with an 8cm (3 1/8") blade.

Light and lively it suited the  spirit of the gift well, as a neck-knife to affix to the ID lanyards worn at organisers and officials this particular event, for safety needs as they might arise. 

The kydex sheath has two lanyard holes, for cord or chain to loop through, to wear in its "neck knife" configuration, as well as a drainage hole at the knife tip end. It also features a built in whistle, which I can tell you is VERY  shrill. It is placed such that you can use the whistle, AND draw the knife if that fails to have the desired effect. 

The blade is 2.5mm thick, and according to the internet has a Rockwell Hardness of57Hrc. That's pretty good for a 440 steel.

The blade itself is also skeltonised, with two cutouts, further reducing wight around your neck.

The thumb and index finger notches are aggressively crenelated grips, but not so much as to chew up finger and thumb. Without any guard, these crenelations act to lock your hand in tight and off the edge.

The edge is interesting as well, with a "tanto" tip, the main line of the blade is in face concave, with a subtle but significant bowing. This is pretty, but makes me wonder about keeping the blade sharp. I use  DMT diamond sharpening stones and I am unsure if i could get a good mating of stone to steel.

The factory may have had the same problem, as the blade ships only "supermarket-sharp", so I'm a little disappointed by this, especially on a chisel-ground blade. Hopefully I can do some good work with this, maybe a stropping will fix it.

Review: Zulu Nylon Gear - MOLLE car visor

Ever find yourself rummaging in the glove-compartment or coin dish in your vehicle for that pen, tool or gizmo, but have been unable to do so? I certainly have. The solution I have had in my current vehicle (a 5-door 2002 Toyota RAV4) is to have some of the internal compartments dedicated to certain things. This usually worked out, but from time to time, they aren't just where I want, when I need them. The solution came to me when I saw this come up in my feed from they folks at Soldier Systems I was reminded of it when Hornest advertised on their FaceBook page. This is the Zulu Nylon Gear MOLLE Car Visor.

What it is, is a double sided mid-weight nylon cover for your car sun-visor which is designed to fit most vehicles. It is approximately 30cmx15cm (12"x6") and has two distinct sides.

On the "down" facing side, a 3 channel, 8 row set of MOLLE webbing, allows you to mount and carry all kinds of things. The top and bottom channels are made of elastic webbing, and each end of the elastic channels is a loop, which are perfect for cylume sticks, or even a small LED flashlight.

Between each of the channels is a band of loop-field, for attaching patches or name-tapes (which would display when the visor is folded down). The middle band webbing is regular MOLLE webbing, for stability and strength.



When "up" the contents of my MOLLE visor don't interfere with my vision, and even a small pouch could go up there without a worry. This is my next thing to check! You can see from this angle, the hook-and-loop straps that act to fix the open end of the panel to the visor. This also leave a few more regions of hook-filed for attaching patches. The whole piece opens like a taco, and folds over and around the visor, with the long hook-and-loop straps giving you the ability to adjust it to the size and shape of your visor.



The flip-side of the cover has two document pouches, and three more loops of elastic, and a nice big watermark for Zulu. I have been thinking that I might slot my Stiff K.I.S.S. car-knife into that, rather than having it under my seat, making it more accessible for emergency access, and also stuffing the pockets with some first aid items like sterile gauze packets.

All initial tests and trials have been really good. I haven't loaded it up very much, but it's given me no signs of slipping of drooping. One thing to note, the cover doesn't have a cut-out to slot into the car-visor return clip (on the roof), so you have to push it in a bit to "click". I like it a lot, and look forwards to messing with its configuration to see what I can, can't and want to carry on my visor.

Events: Stampede Run

I've talked quite a bit about my training and get-up for Tough Mudder that I ran in May 2012, and I think I got the bug. I also challenged myself to the Stampede.

The course was divided into a 5km run, and a 10km version (splitting off at the 5km mark, and rejoining for the final few obstacles.

The Melbourne 2012 run was held at the the Glenbrae Equestrian Centre in Wandin, and made good use of the site and facilities.


Under and Overs - log crawl and climb
Rope Tango - mud crawl whilst pinned down by a cargo net
Human Window - climb though odd shaped holes
Wrecking Yard - crawl through, over and on top of wrecked cars
Ice Bath - wade through and dunk in an ice filled pool
Bus Stop - climb over cargo netting up and over a bus
King King - big pile of tyres
Spiders Web - climb through a stand of trees wired with bungy-cord
Giant Slip and Slide - a long, long water slide into a pond
Trauma Tunnels - Crawl through piping and squirm through flat plastic sheeting
Sand Blast - do a circuit with a sandbag
Quick Step - run through flat tyres
Hay Stack - climb over giant rolled hay bales
Devils Cave - a darkened shed with falling water, and hay bales
Cable Chaos - climb over a series of stacked cable spools
Gladiators - run past a gauntlet of pugil-stick and boxing pad armed opponents
Tunnel Under - climb through tunnels
Dumpster Jump - climb in and out of a set of dumpsters (one with apples)
Half-Pipe - Scale a high sloped ramp
Sunday Roast - run over fire
Mud Buffet - crawl under barbed wire through mud
Bug Zapper - dangly cable filled hall some of which running with 10,000V!
As well as these, there were numerous stretches of thick, gluggy mud. and wading through murky ponds, and the occasional equestrian hurdle.

copyright to Supersport Images Pty Ltd  

This is my taking a leap over the bonnet of the last car of the Wrecking Yard. It was obstacles like this, and the crawling ones, that made me choose to wear my BlackHawk! Advanced Tactical Knee Pads v2.0 I've had these for a while, and they have done good service, although I have skinny legs, and found that they did slide a little being on bare skin, when I was crawling through mud-filled tunnels. I wouldn't have wanted to go without them though. Wearing suggestions anyone?

copyright to Supersport Images Pty Ltd   

This is me wading through the barrel filled dam, I wanted to give some of my other kit a good solid workout, and opted to go with my First Spear OAGRE vest, that I got from the folks at LEGear. As well as being well fitting, and totally as rugged as I have previously reported, I found that the belt-ties ensured that I didn't have to worry about my shorts coming off, and gave me some significant rash-protection when rolling over and crawling through obstacles. I also ran with some patches: A TAD logo Ranger-eye, I also wore my Stargate LRP nametape, to see how that held up and my ITS "Crew Leader" Tab. I pinned the Stampede ID number to the MOLLE, rather than using the sticky label, knowing the challenges it would be facing. On the back of the OAGRE I laced my "Zombie Control Officer" laminate, for a bit of fun, which got a lot of cheers as I passed folks, and the Tough Mudder patch on the back, under the drag handle. The 3L Source bladder that came with my Platatac Bravo pack fitted pretty well inside the OAGRE.

I also changed what I wore on my hips. Lesson learned from Tough Mudder earlier in the year. As awesome as my Survival Utilikilt is, it is not optimal attire for an endurance obstacle course like this, which is why I was so pleased with the new addition to my clothes-pile, in the TAD Gear Amphibious Cargo Shorts. As they were new, I didn't want to risk running-rash, and wore some boxers under them. Useless, they waterlogged and sagged. I would have been better off going my usual commando. Great shorts, fast drying and mud-shedding, comfortable and good for adventure!

copyright to Supersport Images Pty Ltd 

I opted for a hat over sunscreen, which gave me somewhere to mount my Contour GPS, in its waterproof casing, as well as keeping my hair out of the way. I wore my Platatac Tactical cap, which also somewhere to out my MSM "Zombie Hunter" patch. The Contour in its case assed quite a bit of asymmetric weight to one side of my head, I think mounting to a chin-strapped bump-helmet will be my next option. I also wore my Headsox scarf-tube, which helped keep the sun off my neck, keep the vest from chafing and also as a smoke filter.

I wore my Platatac Punisher-Skull logo CUS shirt which was a dramatic improvement in comfort over the Jackeroo safari shirt I wore for Tough Mudder. It dried, it breathed, it wicked, and was pretty bad-assed to boot!

I kept my delicate hands safe from harm with my trusty Ironclad Landscaper gloves.

So here I am at the end of the race, having crawled under barbed wire covered mud and been shocked by electricity over and over. I wore my much abused Altama Tan Desert Mil Spec boots, veterans of years of summertime wear, Stargate LRP and the Tough Mudder. This may have been their swan-song.

I did the 10km course in just under 2 hours, keeping a pretty constant pace. I'm not fond of running, it hurts, but I managed to jog pretty much the entire course, giving aid to people who needed it, and taking my time. I loved the obstacles, was happy with my effort, and the little preparation I did to be ready for it. Since May, I've gone for perhaps 4, 8km runs at lunchtimes at work. I feel that I am able to get from A to B in good time, regardless of the obstacles in my path.

Review: Triple Aught Design - Amphibious Cargo Shorts

As it heats up, I wanted to get some shorts that would both fit (yes, I have apparently grown as I have matured and done more running) and would be able to take with me whilst camping or adventuring. One such adventure was the Stampede Mud-Run, which I will discuss in a post soon. I had been in touch with Mr Tay Choon Mong of HorNest, and he put aside a pair of the Triple Aught Design Amphibious Cargo Shorts for me.

I'd been a fan of the TAD Gear for a while, and when I saw their line of Amphibian Cargo Pants get some screen-time in the blogosphere, I kept my eyes out for what else would come from these guys. I already have a couple of little things of theirs: patches and Ranger-eyes so I was looking forwards to more. There were no exception.

Made from an "Amphibious Cloth" which is to say 100% Nylon (3.4 oz) with a DWR Finish (Durable Water Repellent), the material is silky to the touch and light. You can see a 1" loop field poking over my right thigh, with a TAD logo Ranger Eye glow in the dark patch fitted to boot (Thanks Hornest!)

Made for movement with a gusseted crotch, and clean seams, they provide unrestricted movement running or clambering, whilst still being comfortable when I am chair-bound. More importantly, they are "Engineered for Abuse" with triple needle stitching on the in- and out-seams, and the pockets and seat are also reinforced to enhance ruggedness.

What about pockets? Well let me get you going here: These shorts are constructed with five sets of pockets! From the front you can see Two Front Welt Pockets, which each having a D-ring hanging from below the belt loop, these were both deep and broad enough to take my iPhone 4s in its Opt Silicone Armor iPhone case, and the carabiner on the bottom of it clips nicely onto those D-rings. They also make good attachment points for my paracord lanyard.



Two hand pockets, come in where you might normally expect them, and also feature a deep (two knuckle) coin pocket, which is probably sufficient to hold a pistol magazine, if that's your thing.

The thigh cargo flap pockets sitting mid-thigh passed my favourite test, they fit my iPad1, but more importantly, feature with hidden dual-button closure, with drain hole grommets. I put these to a good solid test at The Stampede and can report not only did I NOT scoop up pocketfuls of mud, but the water that I took on rapidly drained away. and Thru Slot. You can see the length of fabric ending with a D-loop poking over the top of the iPad here. This sits inside the cargo pocket, letting you secure items, but it doesn't stop there. On the seam-edge of the cargo lid flap, is a cutaway gap, allowing you to feed items into, or have them slung out of the pocket! Cables, cord and tubes, oh my! I thought I had torn the stitching, and was thrilled to see it was a feature. Awesome!


On the backside, the two rear flap pockets feature the same hidden dual button closures as the thigh Cargo pockets, which not only means your gear stays in, but the wilderness stays out! I don't often use my seat-pockets, having a bony ass, so being able to button-up and forget is a great option for me.

One really exciting feature that I only noticed after washing them inside out was the two hidden passport pockets on the rear inside, hanging off the back of the flap pockets, to hold your personal documents discretely: passports, tickets, visas, whatever. They aren't waterproof , so be advised you'd need to wrap whatever you stuff in there, but a great option to have when traveling in unpleasant places.

All the buttons are affixed with nylon webbing with bartack stitching for greater staying power and quick repair out and about, rather than being sewn directly to the pants. The fittings are all plastic, making these, when combined with a nylon belt buckle seen on the 5.11 TDU belt, make these an airport safe pair of pants! I "go commando" and they are very nice to wear, the gusseted crotch, and clean seams really coming to the fore there.

Probably the best thing I can say about these shorts are how well they fared in some pretty rough conditions. The Stampede mud-run may have only lasted two hours, but I was climbing over logs, crawling through mud and rocks, running through ponds and mud-pits, and they just shook it all off.

Have a look at the picture and tell me what you think. If I hadn't wanted to wear them to work, I think I could have just hit them with a stick a few times and knocked the dust off. They dried off SO quickly, that the only reason I was damp was what I was wearing under them.



Totally worth the investment!