Review: 3x30 M16 magazine pouch

Following on from my review of a "vintage" butt-pack I did a little while back, here is another piece of old kit that still serves really well. This is a 3x30 M16 magazine pouch, which I collected from a disposal store a few years ago. These are based on a Vietnam era pattern, and the ones I have are made of a woodland camouflage pattern nylon and it seems these had a NSN of 8465-00-001-6482. It is designed to hold three 30 round M16 magazines, and has two "wings", one on each side which after doing some research I see are for hanging grenades.

So, what can I tell you about them? They are constructed of a light nylon, with tape sewn around the edges to contain any fraying. The front and back panels also feature a stiff plastic plate, sewn onto the nylon, which gives the pouch some rigidity and presumably protected against the material  tearing and the strain put on it by the hard magazines.  Internally the pouches originally had two strips of nylon tape dividing the mouth of the pouch into three, one for each magazine.

The lid has a plastic clip, the teeth of which are pinched to release. As you can see, I stuffed this one open with a ubiquitous Nerf magazine which is a bit too long for the width of the pouch. but you get the idea. This is an ALICE pouch, and has two clips at the back for attachment. The grenade clips are press studs (although one of mine has torn through the nylon). I also cut one of the internal straps, so that I can fill this particular pouch with larger items, such as the electronics pouch for my Stargate laser tag kit.

These are cheap, light and fairly sturdy pouches. They are quite easy to come by and with a few modifications (cutting the internal straps) give quite a large storage capacity, as well as the two wing pouches on the sides, even if they are oddly shaped and open.

Home Front: Licensing

In the process of making my own laser-tag tagger, I ordered and imported some parts that were seized by Australian Customs. Woops. It didn't occur to me that certain paintball accessories, namely a
SCAR-H stock mockup and a magazine mockup would trip the rules (not being actual markers, but accessories) but I was wrong. I was given the option of giving up my goods and going I record as having been warned, or going through the licensing processes to import paintball markers (and/or parts). This is a two tier process where one needs to apply for an import permit, and to do so requires either a retailers license as a reseller, or a Class P long arm shooters license.

There are a variety of classes of shooters license in Victoria, each covering a particular variety of firearm;
A-(Airguns,rimfire, non pump/semi shotguns),
B-(Muzzle loaders, center fire but not semi or full-auto rifles),
C-(semiauto rimfire with no more than 10rnd mag, semi-auto or pump shotguns with no more than 5 rnd mag, tranq guns),
D-(semi-auto rimfire with more than 10rnd mag, semi-auto or pump shotguns with more than 5 rnd mag, center-fire semi-auto rifles)
E-(military or paramilitary weapons MG's, mortars, RPGs, carbines (less than 75cm))
H- (handguns)
P- (Paintball markers)
Its worth noting that as far as legislation and enforcement is considered, all the above weapons are all treated the same. A paintball marker left in the back-seat of your car is apparently no different to an M-249 LMG, a SPAS-12 shotgun or Dirty Harry's "most powerful handgun in the world" so, I want to do the right thing.

As I've mentioned before, I'm not much of a gun-nut; we don't have any large terrestrial carnivores where I live, armed violent crime is pretty much a non-event here, we are unlikely to ever be invaded, I don't do sport hunting. I have probably an inordinate affection for militaria and I don't routinely hunt. So apart from a casual interest in collecting firearms of the world which I may well peruse to complement my collection of swords, knives and daggers, I don't have what I would consider a -pressing- need for a firearm, especially for my own day to day well-being, as I might were I back living elsewhere in the world. (Libreville, Houston, Dubai). I do like my Stargate LRP Lasertag pew-pew-pew and I have enjoyed paintballing in the past. Bush-ball, rather than tournament style.

So, in order to get my paintball parts, to build my laser-tag marker (which in and of itself doesn't yet require a license, but may soon, as an "imitation firearm" depending how the laws go) I fronted up, and sat a paintball safety course exam, and joined a paintball club as a financial member. I have filled in the forms to get my Class P license, and to import my parts. I already have a suitable storage container (being a steel locker, which can be "permanently affixed" to the place of storage, as it is less than 150kg empty). I will also submit my "Permit to Acquire a Longarm" form and THEN apply for customs to release my parts, which they may, or may nor do. They may also bill me for their trouble if I am unsuccessful.

A lot of trouble for a trumped up toy, perhaps, but I want to do things by the book.

I did so in getting my Governor in Council Exemption Order for the Control of Weapons Act 1990, as a bona fide collector of swords, knives and daggers, which along with my membership to the Australian Kendo Renmei keeps my collection of pointies above-board.

Review: Platatac twin 40mm pouches

I've had a lot of meetings and coding to be doing in the last few weeks, so have been neglectful of my blogging, let alone my preparedness. We've hit a bit of a rough patch financially, so have been living a bit more frugally than previously. This means less toys for me, but full bellies and happy house. One little extravagance I had was picking up these pouches.

These are designed to each carry a 40mm grenade launcher projectile, which as it happens, I don't have much need to do (desire, sure, but no need) but the design of the pouch suited itself to adaption to my other needs.


These are again the standard 1000d Cordura nylon construction, but there is some design variation between the two sets. The key similarities are that both sets feature independently openable compartments, which are closed by a tongue of hook-and-loop, on a belt of Cordura. This belt loops through the compartment allowing an adjustable length for the item to be stowed, by affixing the tongue of the pouch higher or lower on the body, which in turn. "tightens the belt". One of the two designs augments the hook-and-loop with a press stud on the tongue, and two points on the body to fix it to.

Both pouches have PALS/MOLLE loops built in, although the footprints are different between the two designs. The non-press-stud version also has a strap loop at the top, as an extra attachment option.



When I got these pouches, my plan was to empty out some of my other pouches, like the SR25 and FUP pouches that I put on my MAC armour carrier, and also affix to my packs. The reason being that small items stuffed into a larger pouch are difficult to locate and extract. Taking these items, like hand wash and pairs of examination gloves and bundling them into individual compartments makes them easier to find and use, without spilling your goodies to rummage at the bottom of a bigger pouch.

I like modularity, I like the options these pouches give me and I like the fit. I look forwards to affixing these to my kit and having more storage options available to me, grenades or not. :)

Review: compass

For many years growing up, I would respond to a call of "Get lost!" with the smart-ass reply "I've got a compass", which as you might imagine always made me friends. However, it was true, and a compass has been part of my collection of kit for as long as I can remember. I probably had a Swiss Army Knife first, but a compass was right up there. When I lived in Calgary, and did "Outdoor Ed" at Dalhousie Junior High I picked up this Silva base plate compass, which has been with me since. We did orienteering and map reading, navigation and the like. No one ever really pays attention to those things at school, but some of it stuck with me, and I soaked that class up eagerly. Being evacuated from Dubai at the lead up to Desert Storm, fairly unnecessarily, it was fairly daunting for a young teenager to face the prospect of navigating the badlands and desert of the Arabian Peninsula without an adequate means of navigation. I was taught to drive the 4wd in the desert, in order to get away in case of invading Iraqi hordes, and was probably one of the key events in my desire for preparedness.  The lensatic compass came years later, a Christmas present.

  First the base-plate compass. The hard clear plastic base features three rulers, in mm and two in common map scales, for ease of estimating distances as well as a "direction of travel" indicator arrow to take bearings off. The fluid filled needle chamber is patterned on its base with a series of guide-lines, to assist with aligning to grid-lines om a map when relating true-north to magnetic north when taking readings. The bezel is stiff enough to not slip, but moves smoothly. Neither the magnetic needle or the numbers are luminescent but they are clear and easily viewed in dim lighting.

Here is my lensatic compass, it is a knock-off of a US Army M-1950 model and for what it is, is a pretty good tool.  One of the features of this kind of compass a powerful tool is that they are powerful means of taking a bearing on a distant point. It accomplishes this by means of a sighting wire, and a sighting notch, much like the iron-sights of a gun. You align the wire in the notch on a far away point, and you get a very accurate line to that point. The lens in the sighting armature which allows the user not only to see the measurements from the internal protractor without moving the sighting arms from the bearing, but also enable a much finer markings to be read, again increasing the accuracy of the reading.  Tips on how to do this can be found on the Lensatic Compass Guide or from old army manuals such as here easily enough.

Being a fairly cheap knock off, my lensatic compass lacks the a tritium dial or markings, but the four points of the compass are luminescent. The making lines and the bezel are functional enough, and there are 120 "notches" on the bezel, giving a 3 degree "click" for each turn. A second lens over the long line allows for close inspection of the bearing.

The one problem I have found after quite a few years of owning it is that the fluid in the chamber has leaked, and a large collection of bubbles have entered the chamber, and press down on the plastic disk of the protractor. This causes the needle to be pushed off line, with a real risk of erroneous readings. I'm going to try to repair this, but I'd say that this is the risk you take using cheap knock-off pieces of measurement equipment. Good to practice with, or dangle off my gear when I am doing Stargate lasertag LRP, but not something I would stake my life on in a survival situation. 

Get quality compasses. They needn't be expensive military grade pieces, as my Silva shows, but they need to work dependably.

Home front: tool building tools

When I made my 100th post, I posed the question: what would you like to see me review or discuss? Omega's dad, Des, replied with "something about the tools you need to make more tools". I am happy to admit, this isn't something I had previously given much thought to. The situation is this: in the event of a collapse of consumer infrastructure, (i.e. shops not being stocked, factories not running, distribution cut off) how do you go about acquiring tools needed to rebuild, when disaster strikes? What do you do when you need to fix something, and you don't have "the right tool"? You have to make one! Enter the realm of the smith.

I'm a hobbiest tinkerer, I have a small collection of power tools, like a saber saw, circular saw, drills, sander, grinder, a Dremel and the like, but in a disaster, electrical power isn't something you can count on. I also have a variety of mis-matched hand tools; saws, files, hammers, pliers and drivers. Could I fashion a new tool from my collection of tools? perhaps. I've often "made-do" with what I've got on hand, sometimes effectively, but usually such measures are only temporary and rarely last a few uses. However, in order to really -make- something, there is one key element I am missing. Fire.

This is a picture of a workshop in Kenya, which is like one of several I saw when traveling there (I didn't take this pic, credit to The Atlantic) but it's a great example. I've seen similar workshops in Gabon, Thailand, Egypt, Greece. The key is that with very few "modern" tools, and what is essentially "junk", many things can be made, repaired and re-purposed. In the event of a disaster that perhaps doesn't "knock us back to the stone age" but instead "knocks us back to 3rd-world conditions", this is the kind of setup that you could expect to need, and see cropping up wherever someone with the smithing skills and equipment can set up.

I came across an interesting link, to a post-apocalyptic blacksmith and if you can get past the dogma, he has some really insightful things to say about boot-strapping yourself back into the advanced-tool-use game. I know some people with better equipped tool-shed than I, and a couple of sword and armour smiths, I know where a historic railway workshop is. If I needed to have something built, those are where I would turn. In the mean time, it would be a case of rolling the Deathmobile through the barricaded doors of your local massive hardware warehouse.

Review: Lazy Patch Duvet Suit

Winter is Coming. I am really not fond of the cold. I have lived in Denver in the US, Surrey in the UK and Calgary in Canada, so I am no stranger to "proper" winters, with snow, sleet, black ice and exploding water pipe misery. That's one of the reasons I am so pleased to be living in Melbourne, all in all, we have very mild winters here. The temperature rarely drops below freezing. The weather is however, very changable and the butt of many jokes....

Either way, I dont enjoy being cold. I'm usually happy to put layers on, with a t-shirt, a vest, a polar fleese jumper like the ones I have reviewed, and the like, but there are times where I just want to rug up, sit at my computer and watch hilarious people hurt themselves whilst family records it for YouTube. Thats where the Lazy Patch Duvet Suit comes in perfectly. They also get called Doona Suits, but thats a cultural thing I think :)

I  got mine a few years ago, a gift after spotting them online, these are in fact made by a Melbourne based comapny, which pleased me to no end. What they are is a set of pants and jacket, made of fluffy doona material, with a cotton inner and outer laer, stuffed with 100% polyester. The great thing is that they are made as an "all over" outfit, being extra long in both wrist and ankle length, which is especially good for a long limbed critter such as myself, regular pajamas usually leave me with bare chilly skin.The Lazy Patch suit jacket also is cut long to ensure you have good coverage and no sneaky drafts stealing away your precious body heat. The jacket features a large pectoral pocket, and two good-sized hand pockets as well as a very high collar, giving you doona all the way up to the cheeks for that all-over body warm feeling.

The zipper on the jacket is double ended, so you can regulate your airflow, for when things start to warm up. The pants have a drawstring closure, which normally would perturb me as I don't have much in the way of hips, but tying them up , combined with the squishy nature of the doona-pants, have never given me pause to worry about loosing them. They also feature a set of pockets, which is great. Lazy Patch have recently started shipping their suits with a clip on hood to reduce the loss of heat from the head (but please note the old "75% of your heat loss is through your head" myth was busted). My suit pre-dates this however, so I can only guess at their awesomeness. They also make booties of the same material to complete the all-over body cocoon of warmth. Now, obviously, my suit is in Woodland Cam, but they offer a variety of other colours, mens/womens/kids cuts and the like. These aren't weatherproof, being cotton based but for those times when you are going to be cold but dry, they are really exceptional for keeping you warm, not weighed down with layers and layers. Purpose built to keep you snug, indoors. That said, I've taken these camping frequently, great for those nights around the campfire and the early morning dashes to the calls of nature.

They have a new product, an all encompassing suit they call the Pouch Suit. This looks a bit more rugged,
outdoors capable. I'd love to give one a try. However, till then, I will be spending more evenings in my Duvet Suit, trying to remember not to wander to the shops in it, more for the cammo than anything else.

So, come the storms, snow-drifts, blackouts, I'll be ready. And warm.

Review: Australian Army Butt Pack

I've reviewed a lot of modern packs and pouches, almost all of which I use regularly, or plan to in the event of an emergency. Cordura, nylons and all the modern trimmings. However, there is a lot to be said for the packs that were cutting edge or at least fit for purpose in yesteryear. These are the pieces of kit you find in op-shops, and in discount-barrels at Army Surplus and Disposal stores. This is one such piece. The OD Canvas Butt Pack one of several I have, from a variety of sources but here is the one that I use more often. The name comes from the position you wear this on your belt, right at the back, at the small of your back. Silly name, good pouch.

The heavy "government issue" 20 oz canvas pouch comes with a fold-over lid-flap that features a name-tag pocket as well as a carry handle. The lid-flap is secured by two metal fittings through which thick canvas pull-straps feed to give a easily fastened and openable lid. A series of riveted eyelids line one side of the lid, I'm uncertain what this is for, but i threaded a length of paracord through them. You never know. It also serves as an attachment point for other kit.



The back of the pouch features two sewn-in Alice keeper clips, another pair of canvas pull straps, which act as compression straps matching with another set of metal fittings found at the front of the pouch. A set of eyelets can be found at the top of the pouch, on a pair of reinforced canvas toggles. I've used these to fit a shoulder-strap to turn the belt-pouch into a slingable one. Useful if you have several of them, want to pass the contents from one person to another or any other reason to not have it physically attached to yourself, but still hands free. Simple really. The wide canvas belt around the pouch looks like standard 50mm webbing, and has a couple of extra loops for Alice keeper clips, and two extra wide loops for slinging other kit, one on each side of the pouch.



The inside of the pouch is really quite spacious, and I can fit two of the "3L dead people jars" in a pinch, with a little extra room, with measurements of 23cm x 21cm x 15cm (9" x 8.5" x 6") or around 7.5 L (2gal) giving you an idea of the capacity. Nothing to be sneezed at. The inside of the pouch is lined with plastic, making a pretty waterproof container. There aren't any drainage grommets and it doesn't seal shut, but is certainly dunkable and rain resistant. I expect it could act as an improvised bucket as needed. This may not be what you want after falling into a lake though.



One interesting feature is the large turtle-neck sleeve of the plastisised lining, which allows the user to fold and cover over the top of the pouch, before closing and securing the lid, to offer some water resistance. It also acts as a secondary means of securing your load, even when the lid-flap isn't fastened. I previously used this as part of my Stargate lasertag LRP kit as a dump bag, which I replaced with the Platatac gas-mask bag but I still take a couple of these with me, with shoulder slings attached. I also gave one to my step-daughter to use as a bug-out-bag when she expressed an interest, following Season 1 of Walking Dead.

These are great pouches for what they are, tough, dependable, and if you can find one in good condition, that hasn't been trashed by it's previous owner, I expect they will see you through pretty much anything you care to throw yourself into.