Review: Mininch - Mini tool Pen and Tool Pen

Seen first on Breach Bang & Clear, here:

I am all for small, modular and resilient tools, and there comes a time when you just need to have a handy stealthy tool ready to go.

This is the Mininch - Mini tool Pen and Tool Pen set which I picked up via Kickstarter.

I opted for the full bells and whistles set, which included all the extra hex bits and both the new mini-tool pen, and the original tool pen.

They are for sale, live, here:

The mini-tool pen is milled from 6061 aluminum, sand-blasted finish. The tool itself measures 133.5 mm  / and is 12.8 mm in diameter  and weighs 46 g (with 5 bits inside).

•  The bits are S2 tool steel and measure  35.6mm  long and 7.1mm in diameter. They weigh a mere 4.5 g apiece. The tool Pen mini comes with 18 bits: 
• Slotted Bits (Flat): SL1.5, SL2, SL2.5, SL3
• Phillips Bits: PH00, PH0, PH1
• Hexagon Bits (Hex): H0.9, H1.3, H1.5, H2 
• Torx Bits (Star): T5, T6, T7
• Torx Security Bits: TR8, TR9, TR10
• Square Bits: S1
• SIM Eject Tool: 0.8
• Pentalobe Bits: P2, P5, P6

The classic Tool Pen is made of the same 6061 aluminum, sand-blasted finish as the Tool Pen mini. It does however weigh 93g (with 6 bits inside) and measure up a hefty 150mm in length and 17.5mm in diameter.
 
Both tools are offered in Snow Silver, Gunmetal and Champagne Gold anodization finishes. I chose gunmetal because of reasons, ha!

The bits for the classic tool pen are 36mm long and 9mm in diameter   and weigh 7g each. The bits are not cross compatible between the tools, but given the ranges of the two, thats not really a problem.
 The classic tool comes with:

• Slotted Bits (Flat): SL3, SL4, SL4.5
• Phillips Bits: PH1, PH2
• Hexagon Bits (Hex): H2, H2.5, H3, H4 
• Star Bits: T10, T15, T20, T25
• Imperial Hex Bits: H5/64, H3/32, H1/8, H5/32
  
• Robertson / Square Bits: S1, S2, S3
  
• Pozidrive Bits (Pozi): PZ1, PZ2
  

Both the Tool Pen classic and the Tool Pen Mini feature magnetically closing caps, and a really interesting tool seating and shifting system.

Inspired by “Pop-A-Point” rainbow pen & mechanical pencil,  the bits all sit within the tool, in hex-shaped lanes, each nesting into the base of the one above it, and held in place, top and bottom, but a steel ring, much like a press-stud is. You shift the bits by feeding another bit up from the back end, and along they go.  Each bit has the sheer support of the hex-shaped tool to support it internally, so they are really effective. You do need a full pen's worth of bits to make them effective, however.

Cut-out windows in one face of the tool allow you to see the contents and order of the bits stored within, using a very clear icon engraved on the side of the bit. The magnets in the caps don't interfere with the bits, although they don't really effectively allow you to store the caps when using the tools.

Between the range of bits offered, and the ease in which they all store, either internally for your most-often used sets, or in the solid, flip-top bit cassettes you can get a pretty wide range of tools in a very dense package with either of these tools, doubly so with both.

This is super useful when traveling, especially overseas, when you might find yourself needing to get into something, fix, repair or open some technology that you can't reliably ask someone else to do so, and having a fully decked out specialty screw-driver set is simply brilliant.

Sneak Peek: SOG Instinct Mini Fixed Blade knife

As first seen on Breach Bang & Clear

I was sent a cool little knife by the good folks at SOG, and I wanted to get my initial thoughts on it out there. I'm a fan of little knives, because they have a lot more close in utility when doing chores and around-the-bunker tasks. You don't always need a machete to cut into your MRE's, nor a "that's not a knife, this is a knife" to get your point across. Especially if you don't want to cause a scene. Be a gray man, not a rain man .... There is plenty that a 2 inch blade can do, if you've the skill and initiative, so you don't need to feel inadequate when packing a little something. Especially if you're putting it in a boot, or a pack-strap. Save the save on your hip for a tree-chopper.

The SOG Instinct is a compact, wearable fixed blade knife that is made just for those times. This is a little skeletonised blade, that measures a mere 12.2cm (4.8") with a 4.8cm (1.9") blade, with a thickness of 0.4cm (0.16") and it weighs only 31g (1.1oz) and made from a very reliable 5Cr15MoV steel. It comes with a slight clip point, which makes for easy re-sharpening when it comes time, and a molded hard nylon sheath, which is fitted with several mounting options, including an adjustable and reversible belt clip.

This is sweet little blade, and I look forwards to giving it a more through trial in the near future.

Review: Smart Wrench

Here's a little tool that I backed on Kickstarter, and was really expecting big things from. The idea was elegantly simple. A CNC milled titanium ratcheting wrench, with storage for additional drivers built-in the housing. 

It was a relatively small project, and only had low numbers, due in no small measure I suspect to the high price, but at the time I was flush, and eager to add some more multi-capable titanium tools to my collection.

The development was a bit slow, but we had design and prototype pictures along the way, and this is often the case with first-time Kickstarters, so I didn't worry much. Eventually, the tool arrived, and I was really impressed with the beauty of the thing. Smooth lines, lovely graduations and a very smooth screw-on tool housing in the handle. The tool bits were also very nicely produced, and nested really well, without any significant rattle when fully stowed.

The bits included are: 2mm, 2.5mm, 3mm, 4mm, 5mm hex bits, and a flathead bit, all CNC turned from the same Grade 5 titanium alloy (commonly known as Ti6Al4V) as the rest of the tool.

The extender bar that marries to each of the bits to the wrench body has a rubber o-ring on the tool-mating head, as well as the two sides where the extended marries to the wrench. These bind the bits to the bar, and the bar to the tool by friction, some other users commented eu were disappointed that a ball-bearing indent attachment wasn't offered, but it seems to work well enough for me.

The ratchet has a cute engraving to indicate the direction of ratcheting to use, but here is where the tools biggest fault lies. The ratchet slips extensively, and either doesn't catch at all, or slips under what I would call "normal use" in hand tightening or loosening bolts, screws and the like. 

I was really disappointed with this, and it seems my fellow backers were too. Such a beautifuly put together tool, and when it comes to the primary action, such a disappointment. With some angling, you can get a better or worse ratcheting action, but even then, it's barely functional. 

Considering I'd want to be using for small electronics and devices access, where bolts are often held in with Loctite glue, and need a fair amount of delicately applied torque to initially shift. Outstanding ergonomic and practical design, such a let down for the functional basis of the tool.

Review: Propper 19/67 notebook

 I've been a big fan of digital documentation for quite some time. I was an early adopter of PDA's, with Palm Pilot V and Mitac Mio-168 before settling on iPhones ... Before then I was a firm user of Filofax binders.

Sometimes there is just no substitute for dead-tree edition. Propper were kind enough to send me a set of pocket-sized notebooks in my recent delivery, and I've had one sitting along side my iPhone in my Hazard4 Escape RG harness and beside my passports.

There are times where you just need to be able jot some thoughts down in a way that you can share, or destroy, easily. Take these notes and map: I've got a map, shopping list, a to-do and task management right there. 

I could tear this page out, and take it with me, pass it to a friend, eat, burn or whatever.

The 48 pages are grid printed, and whilst the grids aren't either in fractional cm or inch increments, they are nicely uniform and pleasant to write on. They aren't waterproofed like the pages of a Rite in the Rain notepad, and could even be used as kindling, in a pinch.

Notepads, still not a dead technology, and better yet, they never run our of battery or need software upgrades.

Review: Propper - U.C. (User Configurable) pack

As first seen on BreachBangClear, where they make fun o' me accent, mate!

Inspired by the Marine Corps Assault Back, the Propper U.C. (User Configurable) Pack keeps you prepared, which is just the kind o lineage I like to have in a bag. I have a load of respect for the Gyrenes, my cousin had several long stays somewhere rocky and unpleasant serving in OEF, and if the design is tough enough for those lads, I couldn't ask for more. It’s designed to be customizable inside and out, allowing you to add the additional pouches and accessories you need when you’re on the move, depending on your requirements.

Made from 1000D Cordura nylonand wrapped pretty extensively in MOLLE webbing to accept whatever additional pouches you might require, the simple straight lines of this pack make it well suited to a variety of loadouts. No tight curved corners to try to jam kit into.


The pack measures 50cm (20") x 35cm (13") x 16cm ( 6.5", so you've got a lot of capacity to play with.

Hook-and-loop pass through openings on either side of the carry handle on the top of the pack offer hydration tube or cable pass-through porting, they are X-cut to keep dirt and other crud from making its way into your delicates.

The pack is wrapped in seven rows of six-channel MOLLE on the front, six rows of four channels on both sides and even two rows of nine channels on the bottom of the pack. That's a lot of coverage, especially if you have a variety of pouches you can load it up with.

Internally, all four sides are lined with soft-touch loop, to accept any hook-field accessories, be they holsters, tear-away medical pouches or any number of hook-field backed kit you might have ready to go. Propper were kind enough to send me a few different items to test out, and they seemed to really work well.

Both the inside back and front panel also featured deep zippered pockets running the whole length of the pack to give you a little additional storage, which is good because the inside is otherwise devoid of built-in compartmentalization. You NEED hook-backed accessories to have any fixed storage in this pack, internally.

Here's the inside of the front panel, showing off both the loop-field real-estate, but also the zippered pocket.

The back panel of the pack was fitted out with a stiff plastic board, to give the pack some structure when standing up. It didn't get in the way at all, but if you were really keen on shedding weight, you might pull it, if rigidity wasn't essential for you.

Similarly, the front panel featured a thin closed cell foam panel, to add some padding to the front of the pack. I didn't feel it ate a lot of real-estate, it added a little body to the flap, but if you wanted to shed weight and bulk, its removable.

 

On one side of the pack on the outside, above the MOLLE, a small, hook-and-loop fixed pocket, big enough for a phone, GPS or other small item is fitted. It wasn't super secure, being quite shallow, but certainly good enough for dummy-corded gear you need to access easily and often.

The top of the pack, just below the carry handle also has a small pocket, big enough for folded maps, small items like a compass or a flashlight, and other small kit you might want to have access to, outside of the pack. It's a slightly awkward size for other things, but snacks, maps and meds might well suit it.

One thing I found that the external zipper-pulls, which have these rubber grip-toggles fitted (which are good) come tied in a double overhand knot (which is bad). I pulled the knot right through the grip-tobble on one of them opening the pack, and immediately set-to retying them all with double figure-eight's. The pulls are easy to grip, and quiet, but the cord used isn't great, and I may well replace them with paracord entirely.

One of the things I really liked about the pack is that there are a pair of cinch straps on the bottom for securing gear. I often find myself with extra gear, or loot, to lug back home, and having a set of cinch straps built in can make all the difference. These, like all the main straps, have hook-and-loop strap-savers attached, to secure the excess webbing away when not needed. No more messy tape wrapping.

Inside the bottom of the pack is an isolated storage pocket, fitted with mesh-lined eyelets, top and bottom, which gives you a place to secure away wet, mucky or otherwise unpalatable gear and items away from your main pack. Perfect for a sodden poncho, or even a mess-kit. This is both zippered and also covered by the cinch straps that wrap from the back of the pack to Fastex buckles on the front.

Padded adjustable shoulder straps, broad, slightly curved and simple, secure the pack to the user,  and feature an adjustable sternum strap on sliders on the sewn-in webbing. Three additional cross-bands of webbing on either side give you mounting and cable or hydration tune feed points. Fastex buckles on the straps give you quick release options, and a wider webbing belly-strap is included for secure carriage of the pack.

One thing I really liked was that there are twin padding channels on the back of the pack, giving room for your spine to site between them, and offering some air passage to the fit for those long hot rangings.

One last feature, which I'm happy to see on this pack, and many others these days, is the triangular strap attachment flap, that gives the webbing and Codura of the pack a good purchase, taking the angular strain off the seams. Packs lacking this seem to always come apart here under heavy loads, so it's good to see Propper have taken this little bit of extra thought into their pack design.

This is a very utilitarian pack. Boxy but solid. You need to be aware that the internals are dependent on that hook-field backing to add any additional functionality, but other than that, this would fit in well with almost anyone's light to medium pack needs.

Review: SORD - StormTrooper hand warmer

I got in touch with the good folks over at SORD Australia who had previously fixed me up with the long 870 scabbard pouch and a very clever covert-use hoodie. I had seen they had put out a couple of new items, and managed to secure some, just in time to take out camping and adventuring st s Post-Apocalyptic simulation weekend I was attending.

The first item I want to cover was their very fancy StormTrooper Hand Warmer. Available following a three year development development cycle in which it was put through high altitude parachute descents from around 7600m (25,000ft), and resisting wind speeds in excess of 250kph (135knots/155mph) as well as extended periods in mountain / cold weather environments in multiple countries. That was sales pitch enough for me. I've lived in Calgary, and a couple of other places which have snow, I've even taken a few pieces of kit to the limited snow we get here in Melbourne to trail. I hate the snow, generally, and being cold. Sometimes "hands-in-pockets" is not an option and I like to have options.

Check out that spacious muff!

This is where the StormTrooper comes in. Made from an outer shell fabric of Duro Industries LiteLok  (with a 500D Cordura option in Kryptek Yeti also available), the StormTrooper is filled with 40gsm Prima Loft fill (in double/triple layers), and is lined with the same lightweight lining as used in SORD's jackets.

It attaches in a variety of ways;  with three ITW Web Dominators on shock-cord loops, for attachment to a PLAS/MOLLE platform like a plate carrier or chest rig. There is also a broad hook-and-loop sandwich panel for attachment to platforms with a corresponding hook-and-loop bottom, like the Platatac MAC, I already have as it happens (loop-field faces forward).

Rear view showing belt loops, D-rings and storage cords

The back face is fitted with three belt loops wide enough to take 50mm belts (and feed over riggers belt buckles and Cobra buckles alike). It is also fitted with two D-rings for fitting a neck-strap to sling it around your shoulders.

Zippered blow-out section on the belly of the StormTrooper

The StormTrooper is fitted with 2 separate internal pockets with weather resistant zips for heater packs, or small items, one larger external front zippered pocket for small easily accessible items, like a compass, a light or other small tools and a lower zippered blow out section that increases internal capacity for large hands, especially useful if you have bulky gloves, a mounted GPS or altimeter or a map pouch on your wrist.

Second internal hand-warmer pocket, under recess to stow hook-and-loop flap

Elasticized, adjustable wrist cuffs, let you hunker the muff section down to fir your hands, without leading to a snag-risk in case you need to respond quickly. I found that the muff was perfectly shaped to hold my hands, and let me drop my shoulders, giving me a really relaxed posture, without having my hands stuck in pants-pockets, especially useful when my top was covered in a vest, or obscured by pack-straps.

The internal pockets gave a a couple of places to stash more needfuls, and certainly fit the hand-warmers I have. I also found that the Web Dominators allowed be to quickly roll it up, and stow it away, rolling down to almost nothing thanks to the LiteLok fabric and light down used, and its built in stash sack packs the muff down to almost nothing.

The internally secured storage baggie

Thankfully it's not yet been could enough to -need- the StormTrooper here yet, although it did rain rather miserably on the first night of my last camping trip, and the long walks around the site make for a good chance to stow my hands away. I also found it was a pretty good place to stash some small, light and often used items.

The multiple attachment options, multiple pockets as well as the spacious and comfortable muff section make this an excellent addition to anyone's kit, especially if you are going to find yourself in a cold and miserable place or two. It stayed out of the way when I wasn't using it, and even acted as a quick dump-pouch when I had to stow a long item and keep my hands free.

Post-Apocalyptic Roleplay, with the SORD Stormtrooper at my belly band

You might find that all the accessory shock-cord gets in the way, but they're all removable, and you can set it up as low-drag as you need it.

Next winter, I have a feeling I will be keeping this in my pack, to whip out  when the weather does a Melbourne on us. I look forwards to again being the guy people look at thinking "why didn't I think of that?"

Review: MS Clean kit

This is one of those items that I really picked up for the show-factor alone, rather than for any real practical need. I saw it come up on my Kickstarter feed, as well as on Soldier Systems, where I find a number of cool pieces of tech and tools. So, first up, my admissions: I don't own any fire-arms, but I do a variety of costume and Live-action roleplay events, which is where my "for show only" interest lies.

This is the MS Clean kit.

Whilst I don't own or operate any myself, I appreciate the need to maintain and clean both firearms, and all the tools of the trade, so to speak. I also have a LOT of pouches, and have on occasion had small needfuls drop out and get lost as a result of being adventurous with them in a pouch designed to hold magazines.

I've regularly used my Platatac FUP and other mag pouches to carry my gear, and I saw the utility of a case that married with my existing pouches. The guys from MS Clean offer the cleaning kit to fill the gap they felt existed with the current issued cleaning kits in the US military, and wanted to take advantage of the prevalence of magazine pouches.

The case is curved like a 30 round STANAG or MagPul P-Mag and initial designs looked a little like the P-Mag, with surface ribbing for grip and structure. Made of an injection molded polymer, crush-proof cases prevents spillage of lubricant and bending of rods that they say current issued kits don't. The cases are long enough to old 3x sectioned steel rods, required to remove barrel obstructions like mud, stuck cases or squib rounds. They also include a couple of brush heads, and eyelet head, and a T- handle to drive the lot of it.

The production models include bore brushes for 5.56 as well as 7.62 and 9mm, as well as a dental pick, for all that carbon scoring. The polymer is chemical resistant so the case can be used as a miniature solvent tank, as well as acting as a container to place small parts of a firearm while cleaning.

They also offer them in a couple of different colours, black, tan, green and red. The internal dimensions are 1.8cm (0.72") x 5.3cm  (2.10") x 19.3cm (7.62") and externally 2.4cm (0.95") x
6.7cm (2.65")x  20.3cm (8").

I will be setting mine up as snack and tool carriers, perhaps using the red one as a dedicated boo-boo set, with alcohol wipes and small dressings, maybe even one of the Z-Medica quick clots. I can't comment on the quality of the cleaning tools myself, but I asked out one of my trooper friends to trial it out for me.

"The cleaning kit was a great bit of gear. First i would like to say that the case it comes in is a fantastic piece of gear. It fits in a spare mag pouch nicely and is easily accessible. The frogman lube is a great and does a good job. I found the wire brushes a bit too harsh though and the pull through rods rusted up very quickly. I was impressed with the extra brushes it came with. Its definitely a cleaning kit I carry in my webbing now." - K Taylor WA


The folks at MS Clean copped a lot of flack over the shape and design of the cases, being so close to "real" magazines. Here's what they had to say:

MS CLEAN may be mistaken for an actual magazine 
MS Clean is designed to utilize standard magazine pouches; however, these pouches are modular in nature and as such, the pouch selected to store MS Clean should be mounted in an area where it is not easily confused with an actual magazine.

What happens if I am in the dark and I go to change my magazine and try to put my cleaning kit in my rifle and get myself killed?
You won’t. You are a professional soldier or law enforcement officer, you have undergone months, if not years of training and you would never be so daft as to put your cleaning kit among your actual magazines. You would put it in somewhere else on your gear that wasn't on the front of your vest.

They are pretty prefect for my applications, and I look forward to kitting out my adventure gear (not to mention my kooky-costuming) with them.


To add to the mix, they now have a second Kickstarter underway for the DOUBLE sized kits. Twice the storage, twice the options, including a dedicated medic options, a trauma kit and super-deluxe cleaning options.

Review: TacticalKeychain - TiMaG Paracord system

Not only do I love titanium, and magnets, but also paracord, so when Brad Martin of Tactical Keychains put up a KickStarter project that combined all three, I jumped onboard. I have been collecting the Tactical Keychain range for a while now, with the classic WTF tool (and its variants) as well as the larger cousin, the Large WTF but also the very functional TiKeY key-keeper set, the very crafty TiPiK lockpicks and most recently the also magnet equipped TKMB pen.

The TiMaG project however has been one I haven't reported on for some time, even though I've had these little magnets on my person for quite some time (as astute readers may have noticed, as they sit on my pocket-keychain tool ring).

Billed as magnetic push-pins, and even as "the most overbuilt magnets in existence", these little milled Grade 5 titanium plugs, each with a 2.5kg (5.5lbs) draw neodymium-iron-boron magnet built into the plug. Three channels cut into the sides of the plugs allow you to grip, or or even fit them with o-rings (7/32" ID x 11/32"OD x 1/16"C) for even better grip.

As push pins, they work fantastically, fridge-doors, white-boards, car body. Metal surfaces are just the ticket.

 The standard TiMaGz have the magnet's polarity set in one direction so they repel each other, for ease of manufacture but the Paracord system TiMaG's are created with 50% N 50% S polarity, so they will stick together. (just like the unfortunately fictional MagHook) .

Where the TiMaG's come in handy in a survival situation might seem a little obscure, but with some lateral thinking, a myriad of options arise: Dead drops of keys, papers and the like, either held by the magnet, or attached through the drilled paracord channel.

 I have one threaded through the steel cable of my bundle of pocket keychain tools, meaning I can stick them to a surface and access them, or have my Jil Lite Constel lantern light up my space. I've used the paracord loop to allow me to dowse for dropped items, screws, bolts, knives, needles. 

All manner of ferromagnetic needfuls of a certain weight can be "harvested". The key thing is your imagination, and the contact area you can manage with the TiMaG. Even though the magnets are rated at 2.5kg, I found that the sides and even top of a 450g can of spaghetti needed some finesse to retain a positive lock.



For simple packages, like papers, a spare key, or even say a Oscar Delta - Deep Carry Tube these are an excellent system for anyone. More advanced uses, well, you take your chances, but they are a damn well made set of mini-tools, and I love the aesthetics.

Be sure to check out Mike's NEW Kickstarter, the all new, updated WTF2.0 and TiStiK combo, I'm already a backer, and looking forwards to seeing what they're like to use.

Re-Review: Hazard4 - Escape RG

Escape, as new

As posted in RecoilWeb ..... 

Ages ago I covered an essential piece of my EDC, my custom made EDC holster harness. This faithful piece had been with me for years, and has reached the end of its life. I found the Hazard4 Covert Escape RG combination set, and for the last 18 months, my personal carriage needs have been more than met.

Hazard4 are the "Tactical" arm of Civilian Lab makers of fine modular kit. The link I followed brought me to these, this is the Loader rig with the optional extra anatomic harness.

What it is, is two sets of the Escape Rig, one for each side. The two halves are identical, so I'll cover them as just the single unit.

Here are the two Escape halves, with the Anatomic shoulder harness, and another piece at the bottom to hold them together for stability.

Two pouches, with Anatomical Harness and kidney strap

The pouches are made of Dobby Nylon and have "PU X 2" treatment, and measure 12.5 x18 x4 cm
(~5" x7" x1.5") externally. The main panel is faced with two hook and loop closing pockets, one that fits my Surefire 6PX like a glove, and the other which his more squat.

Both of these pockets are elastic sided, and open cornered. Bear this in mind when looking to fill them. I've had smaller items slip through those gaps, and out of the top, but once I'd found the right fit, I've not had any problems.

Rotating Buckle

In this shot you can see some of the rotating buckles  that are fitted to each corner, each backed with a tab of the same padded material that backs the pouch for wearer comfort.  This is some very thoughtful and innovative design. no more buckle-pinch!

You can also see one of the tri-glide buckles that sit on the middle of each of the four sides. These are for accessory loop and strapping, and I'll get into that a bit later.

The 2013 version of this pouch has all black labeling and non-reflective zippers and fittings, for even lower profile wear.

Front pockets

The "back pocket" of the pouch is an open slot, wide enough for my receipt and card filled wallet, and is mesh-sided to cut weight and improve breathability and drainage. (Luckily Australian money is plastic, in case I ever take a dunk...) You can see another of those elastic-looped tri-glides here, to which I have dummy-corded my wallet. No more dropping it into the toilet, off piers, or leaving it on cafe counters for me!

My iPhone sits in the corresponding other side.

What you cant see is the wide swathe of black loop field, for affixing a hook-backed holster, like the Stick-Up.

You can also see the double zipper here of the inner pocket. Very useful!

Inside the Shuttle

Inside that inner pocket, you see where some real thought has gone into making these pouches. As well as the tough nylon outer, they are lined with quilted micro-suede

They also feature a series of webbing and elastic channels to fit your tools and needful gear, I have my SAR Dead Ringer comb and CRKT K.I.S.S. folder in mine on this side. Passports, and paperwork on the other side.

The pocket opens all the way to the bottom, but, like a good admin pouch, it has webbing retainers, keeping it from flopping flat, but catching it at about 45o so your pens, USB sticks, or whatever don't tumble off into the wide blue yonder.

The back pocket has a press stud on webbing closure, with two sizing options, which is great. I tend to clip my wallet in with the big, and my phone in with the snugger length.



The back of the pouch features a belt loop,wide enough for all the belt I tried it on ( both my 5-11 TDU belts, the 215Gear Ultimate Riggers belt, and the PM Leather Hobble Belt.

Left and right pouches, after 18 months

It also features a press-stud flap option, for quick-release needs.

Why even have a belt loop? Modularity! One of the coolest things about this whole system is that it can be worn so many ways.

 Those corner buckles attach to the included cross-straps, which are two fully adjustable nylon webbing straps, with a press-stud in the middle, to connect the two. All of the straps will "double-back" through the buckles for a really secure fit.

Left and right pouches, after 18 months, side by side

 The tri-glide attachment points allow you to rig any number of stability or alternative attachment options. The rotating corner clasps mean that the straps stay flat no matter what configuration you wear them in, and they stay upright as you move, depending on how you wear it.


The included cross-straps are a little more versatile than the Anatomic straps, but not nearly as comfortable. The pouches can be worn under the arms, holster style, singly or in pairs, horizontally or vertically, but also on the hips on a sling, as a backpack, slung cross-ways like a bandoleer, on the thigh as a drop-leg or on the front of the chest or even as a shoulder bag.

Left and right pouches, after 18 months, trimmed and untrimmed

I used one of the cross-straps to act as a kidney-height stabiliser,  having found that on their own, the pouches slid forwards when I bent over without them.

 One last thing. Each of the pouches comes with a "Shuttle Pouch" which is made from the same Dobby Nylon, and lined again in the quilted micro-suede with mesh pockets along with nylon strapping. The Shuttle pouch is designed to fit into the "Back pocket" of the main pouch,and be clipped in. It features waterproof zippers and a set of webbing eyelets on each of the four back corners for dummy-cording (mmm, dummy-cord: looks silly, keeps your gear on you...).

Single pouch, ventral style

This was a seriously feature and function filled set of kit.

I've been wearing it now for 18 months, every day, getting the configuration and fit right and I must say, it has been one of my better EDC investments for some time. 

I don't feel "dressed" with out it, and it really is my go-to item when it's time to run out the door; be it emergency, fire, flood or groceries.

That said, 18 months worth of wear have taken their toll. The Dobby Nylon has pulled from its seams along the long edges on both sides, in once case, Ive needed to trip the front set of pockets right off, because of them flapping about. 

Side wear, no jacket

Side-draw, under jacket

Under jacket, back view

Under jacket, front view

I wear it every day, all day. I tent to wear a waistcoat when its warm, or a jacket if its cold, when I'm going to be at work, or around people I don't want to give the impression that I'm packing a pistol, because it often gets that kind of question. Depending on your situation, you might want to bear that in mind.

I've traveled internationally with it, and keep my passport safe and snug in one of the shuttle pouches, both of which I have strapped into the main holder, to keep them from falling, or being lifted out. Again, they raised some eyebrows at the security counter, but they kept all my valuables up above my bet, and against my body, so I was happy.